| [ 0.000000] Linux version 5.2.5-gnu-1 (builduser@parabola) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun Aug 4 02:02:20 UTC 2019 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/F2A85M_PRO-rootfs rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/mapper/external-encrypted:external-cleartext console=ttyACM1 console=tty0 root=/dev/mapper/F2A85M_PRO-rootfs nopat iomem=relaxed panic=1 |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Hygon HygonGenuine |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x278/0x330 with crng_init=0 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd28fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dfd29000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| [ 0.000000] x86/PAT: PAT support disabled. |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.10 07/20/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3200.306 MHz processor |
| [ 0.003175] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.003177] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.003181] last_pfn = 0x21f000 max_arch_pfn = 0x400000000 |
| [ 0.003185] MTRR default type: uncachable |
| [ 0.003186] MTRR fixed ranges enabled: |
| [ 0.003188] 00000-9FFFF write-back |
| [ 0.003189] A0000-BFFFF uncachable |
| [ 0.003190] C0000-FFFFF write-back |
| [ 0.003191] MTRR variable ranges enabled: |
| [ 0.003193] 0 base 0000FFC00000 mask FFFFFFC00000 write-protect |
| [ 0.003194] 1 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.003195] 2 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.003197] 3 base 000000000000 mask FFFF80000000 write-back |
| [ 0.003197] 4 disabled |
| [ 0.003198] 5 disabled |
| [ 0.003199] 6 disabled |
| [ 0.003199] 7 disabled |
| [ 0.003200] TOM2: 000000021f000000 aka 8688M |
| [ 0.003444] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC |
| [ 0.003449] last_pfn = 0xdfd29 max_arch_pfn = 0x400000000 |
| [ 0.006229] found SMP MP-table at [mem 0x000f59c0-0x000f59cf] |
| [ 0.006331] check: Scanning 1 areas for low memory corruption |
| [ 0.006336] Using GB pages for direct mapping |
| [ 0.006338] BRK [0x163601000, 0x163601fff] PGTABLE |
| [ 0.006341] BRK [0x163602000, 0x163602fff] PGTABLE |
| [ 0.006342] BRK [0x163603000, 0x163603fff] PGTABLE |
| [ 0.006379] BRK [0x163604000, 0x163604fff] PGTABLE |
| [ 0.006380] BRK [0x163605000, 0x163605fff] PGTABLE |
| [ 0.006553] BRK [0x163606000, 0x163606fff] PGTABLE |
| [ 0.006591] BRK [0x163607000, 0x163607fff] PGTABLE |
| [ 0.006652] RAMDISK: [mem 0x364ad000-0x3724dfff] |
| [ 0.006657] ACPI: Early table checksum verification disabled |
| [ 0.006710] ACPI: RSDP 0x00000000000F5BD0 000024 (v02 COREv4) |
| [ 0.006714] ACPI: XSDT 0x00000000DFD2F0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006720] ACPI: FACP 0x00000000DFD30B50 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006727] ACPI: DSDT 0x00000000DFD2F280 0018C1 (v02 COREv4 COREBOOT 00010001 INTL 20190509) |
| [ 0.006731] ACPI: FACS 0x00000000DFD2F240 000040 |
| [ 0.006734] ACPI: FACS 0x00000000DFD2F240 000040 |
| [ 0.006736] ACPI: SSDT 0x00000000DFD30C50 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509) |
| [ 0.006740] ACPI: APIC 0x00000000DFD30CE0 000072 (v02 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006743] ACPI: HPET 0x00000000DFD30D60 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006747] ACPI: HEST 0x00000000DFD30DA0 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006750] ACPI: SSDT 0x00000000DFD30F70 00051F (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006758] ACPI: Local APIC address 0xfee00000 |
| [ 0.006883] No NUMA configuration found |
| [ 0.006884] Faking a node at [mem 0x0000000000000000-0x000000021effffff] |
| [ 0.006888] NODE_DATA(0) allocated [mem 0x21effc000-0x21effffff] |
| [ 0.006916] Zone ranges: |
| [ 0.006917] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.006919] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.006920] Normal [mem 0x0000000100000000-0x000000021effffff] |
| [ 0.006921] Device empty |
| [ 0.006922] Movable zone start for each node |
| [ 0.006923] Early memory node ranges |
| [ 0.006924] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.006925] node 0: [mem 0x0000000000100000-0x00000000dfd28fff] |
| [ 0.006925] node 0: [mem 0x0000000100000000-0x000000021effffff] |
| [ 0.006936] Zeroed struct page in unavailable ranges: 825 pages |
| [ 0.006938] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] |
| [ 0.006939] On node 0 totalpages: 2092231 |
| [ 0.006940] DMA zone: 64 pages used for memmap |
| [ 0.006941] DMA zone: 21 pages reserved |
| [ 0.006942] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.006995] DMA32 zone: 14261 pages used for memmap |
| [ 0.006996] DMA32 zone: 912681 pages, LIFO batch:63 |
| [ 0.020592] Normal zone: 18368 pages used for memmap |
| [ 0.020594] Normal zone: 1175552 pages, LIFO batch:63 |
| [ 0.037838] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.037840] ACPI: Local APIC address 0xfee00000 |
| [ 0.037847] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.037855] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.037858] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.037860] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.037861] ACPI: IRQ0 used by override. |
| [ 0.037863] ACPI: IRQ9 used by override. |
| [ 0.037865] Using ACPI (MADT) for SMP configuration information |
| [ 0.037867] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| [ 0.037871] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.037882] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.037884] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.037885] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.037885] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.037887] PM: Registered nosave memory: [mem 0xdfd29000-0xdfffffff] |
| [ 0.037888] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.037888] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.037889] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| [ 0.037891] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.037892] Booting paravirtualized kernel on bare hardware |
| [ 0.037895] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns |
| [ 0.152788] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.153308] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 |
| [ 0.153315] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 |
| [ 0.153316] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.153334] Built 1 zonelists, mobility grouping on. Total pages: 2059517 |
| [ 0.153335] Policy zone: Normal |
| [ 0.153337] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/F2A85M_PRO-rootfs rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/mapper/external-encrypted:external-cleartext console=ttyACM1 console=tty0 root=/dev/mapper/F2A85M_PRO-rootfs nopat iomem=relaxed panic=1 |
| [ 0.165733] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.165736] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.199046] Memory: 8128196K/8368924K available (12291K kernel code, 1318K rwdata, 3872K rodata, 1608K init, 3624K bss, 240728K reserved, 0K cma-reserved) |
| [ 0.199203] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.199218] ftrace: allocating 37318 entries in 146 pages |
| [ 0.217644] rcu: Preemptible hierarchical RCU implementation. |
| [ 0.217645] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. |
| [ 0.217646] rcu: RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.217647] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4. |
| [ 0.217648] rcu: RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.217649] Tasks RCU enabled. |
| [ 0.217650] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. |
| [ 0.217650] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.219799] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.220078] rcu: Offload RCU callbacks from CPUs: (none). |
| [ 0.220147] spurious 8259A interrupt: IRQ7. |
| [ 0.226128] Console: colour VGA+ 80x25 |
| [ 0.226133] printk: console [tty0] enabled |
| [ 0.226155] ACPI: Core revision 20190509 |
| [ 0.226287] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.226298] hpet clockevent registered |
| [ 0.226302] APIC: Switch to symmetric I/O mode setup |
| [ 0.226691] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.242969] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e216b0d814, max_idle_ns: 440795319582 ns |
| [ 0.242974] Calibrating delay loop (skipped), value calculated using timer frequency.. 6403.30 BogoMIPS (lpj=10667686) |
| [ 0.242976] pid_max: default: 32768 minimum: 301 |
| [ 0.243010] LSM: Security Framework initializing |
| [ 0.243015] Yama: becoming mindful. |
| [ 0.245032] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.246060] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.246110] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.246146] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.246328] *** VALIDATE proc *** |
| [ 0.246396] *** VALIDATE cgroup1 *** |
| [ 0.246398] *** VALIDATE cgroup2 *** |
| [ 0.246451] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 |
| [ 0.246452] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 |
| [ 0.246454] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.246455] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.246459] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.246459] Spectre V2 : User space: Vulnerable |
| [ 0.246461] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.246651] Freeing SMP alternatives memory: 32K |
| [ 0.249637] smpboot: CPU0: AMD Athlon(tm) X4 740 Quad Core Processor (family: 0x15, model: 0x10, stepping: 0x1) |
| [ 0.266340] Performance Events: Fam15h core perfctr, AMD PMU driver. |
| [ 0.266347] ... version: 0 |
| [ 0.266347] ... bit width: 48 |
| [ 0.266348] ... generic registers: 6 |
| [ 0.266349] ... value mask: 0000ffffffffffff |
| [ 0.266350] ... max period: 00007fffffffffff |
| [ 0.266350] ... fixed-purpose events: 0 |
| [ 0.266351] ... event mask: 000000000000003f |
| [ 0.272997] rcu: Hierarchical SRCU implementation. |
| [ 0.296354] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.303012] smp: Bringing up secondary CPUs ... |
| [ 0.343021] x86: Booting SMP configuration: |
| [ 0.343023] .... node #0, CPUs: #1 |
| [ 0.009544] do_IRQ: 1.55 No irq handler for vector |
| [ 0.383022] #2 |
| [ 0.009544] do_IRQ: 2.55 No irq handler for vector |
| [ 0.423026] #3 |
| [ 0.009544] do_IRQ: 3.55 No irq handler for vector |
| [ 0.425171] smp: Brought up 1 node, 4 CPUs |
| [ 0.425171] smpboot: Max logical packages: 1 |
| [ 0.425171] smpboot: Total of 4 processors activated (25612.21 BogoMIPS) |
| [ 0.426390] devtmpfs: initialized |
| [ 0.426390] x86/mm: Memory block size: 128MB |
| [ 0.427279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns |
| [ 0.427279] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.427279] pinctrl core: initialized pinctrl subsystem |
| [ 0.427279] PM: RTC time: 23:50:58, date: 2019-09-18 |
| [ 0.427279] NET: Registered protocol family 16 |
| [ 0.427279] audit: initializing netlink subsys (disabled) |
| [ 0.427279] audit: type=2000 audit(1568850657.199:1): state=initialized audit_enabled=0 res=1 |
| [ 0.427279] cpuidle: using governor ladder |
| [ 0.429667] cpuidle: using governor menu |
| [ 0.429724] ACPI: bus type PCI registered |
| [ 0.429726] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.429814] PCI: Using configuration type 1 for base access |
| [ 0.429814] PCI: Using configuration type 1 for extended access |
| [ 0.430113] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.430114] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.430114] mtrr: corrected configuration. |
| [ 0.433051] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.433051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.436444] ACPI: Added _OSI(Module Device) |
| [ 0.436446] ACPI: Added _OSI(Processor Device) |
| [ 0.436447] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.436447] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.436448] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.436449] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.436450] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.440842] ACPI: 3 ACPI AML tables successfully acquired and loaded |
| [ 0.441778] ACPI: Interpreter enabled |
| [ 0.441800] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.441801] ACPI: Using IOAPIC for interrupt routing |
| [ 0.441813] HEST: Table parsing has been initialized. |
| [ 0.441815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.441948] ACPI: Enabled 8 GPEs in block 00 to 1F |
| [ 0.444957] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.444963] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.445023] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.445084] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored |
| [ 0.445327] PCI host bridge to bus 0000:00 |
| [ 0.445329] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.445331] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.445333] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.445335] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 0.445338] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.445341] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.445349] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 |
| [ 0.445464] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 |
| [ 0.445585] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400 |
| [ 0.445609] pci 0000:00:02.0: enabling Extended Tags |
| [ 0.445638] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold |
| [ 0.445754] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| [ 0.445771] pci 0000:00:11.0: reg 0x10: [io 0x2010-0x2017] |
| [ 0.445779] pci 0000:00:11.0: reg 0x14: [io 0x2020-0x2023] |
| [ 0.445787] pci 0000:00:11.0: reg 0x18: [io 0x2018-0x201f] |
| [ 0.445794] pci 0000:00:11.0: reg 0x1c: [io 0x2024-0x2027] |
| [ 0.445802] pci 0000:00:11.0: reg 0x20: [io 0x2000-0x200f] |
| [ 0.445809] pci 0000:00:11.0: reg 0x24: [mem 0xf3288000-0xf32887ff] |
| [ 0.445923] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.445938] pci 0000:00:12.0: reg 0x10: [mem 0xf3284000-0xf3284fff] |
| [ 0.446077] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.446094] pci 0000:00:12.2: reg 0x10: [mem 0xf3289000-0xf32890ff] |
| [ 0.446161] pci 0000:00:12.2: supports D1 D2 |
| [ 0.446162] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.446260] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.446275] pci 0000:00:13.0: reg 0x10: [mem 0xf3285000-0xf3285fff] |
| [ 0.446430] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.446447] pci 0000:00:13.2: reg 0x10: [mem 0xf328a000-0xf328a0ff] |
| [ 0.446513] pci 0000:00:13.2: supports D1 D2 |
| [ 0.446515] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.446614] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| [ 0.446754] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| [ 0.446775] pci 0000:00:14.2: reg 0x10: [mem 0xf3280000-0xf3283fff 64bit] |
| [ 0.446830] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.446923] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| [ 0.447065] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 |
| [ 0.447183] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 |
| [ 0.447198] pci 0000:00:14.5: reg 0x10: [mem 0xf3286000-0xf3286fff] |
| [ 0.447337] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 |
| [ 0.447370] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.447410] pci 0000:00:15.0: supports D1 D2 |
| [ 0.447516] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 |
| [ 0.447553] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.447593] pci 0000:00:15.1: supports D1 D2 |
| [ 0.447701] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.447716] pci 0000:00:16.0: reg 0x10: [mem 0xf3287000-0xf3287fff] |
| [ 0.447851] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.447869] pci 0000:00:16.2: reg 0x10: [mem 0xf328b000-0xf328b0ff] |
| [ 0.447935] pci 0000:00:16.2: supports D1 D2 |
| [ 0.447937] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.448035] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 |
| [ 0.448126] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 |
| [ 0.448215] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 |
| [ 0.448304] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 |
| [ 0.448396] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 |
| [ 0.448483] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 |
| [ 0.448618] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000 |
| [ 0.448637] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] |
| [ 0.448648] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] |
| [ 0.448658] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] |
| [ 0.448665] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f] |
| [ 0.448674] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref] |
| [ 0.448681] pci 0000:01:00.0: enabling Extended Tags |
| [ 0.448742] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 |
| [ 0.448742] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff] |
| [ 0.448742] pci 0000:01:00.1: enabling Extended Tags |
| [ 0.448742] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring |
| [ 0.456358] pci 0000:00:02.0: PCI bridge to [bus 01] |
| [ 0.456364] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| [ 0.456366] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| [ 0.456370] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.456386] pci_bus 0000:02: extended config space not accessible |
| [ 0.456469] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) |
| [ 0.456477] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.456478] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.456480] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.456481] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) |
| [ 0.456483] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.456526] pci 0000:00:15.0: PCI bridge to [bus 03] |
| [ 0.456605] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330 |
| [ 0.456653] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf3107fff 64bit] |
| [ 0.456844] pci 0000:04:00.0: PME# supported from D3hot D3cold |
| [ 0.456886] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5 GT/s x1 link) |
| [ 0.466357] pci 0000:00:15.1: PCI bridge to [bus 04] |
| [ 0.466366] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff] |
| [ 0.466698] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.466761] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.466822] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.466883] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.466942] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.467001] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| [ 0.467059] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.467118] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.469675] pci 0000:01:00.0: vgaarb: setting as boot VGA device |
| [ 0.469675] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.469675] pci 0000:01:00.0: vgaarb: bridge control possible |
| [ 0.469675] vgaarb: loaded |
| [ 0.469872] ACPI: bus type USB registered |
| [ 0.469889] usbcore: registered new interface driver usbfs |
| [ 0.469898] usbcore: registered new interface driver hub |
| [ 0.469935] usbcore: registered new device driver usb |
| [ 0.469967] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.469968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.469971] PTP clock support registered |
| [ 0.469980] EDAC MC: Ver: 3.0.0 |
| [ 0.470073] PCI: Using ACPI for IRQ routing |
| [ 0.470073] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.470073] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.470073] e820: reserve RAM buffer [mem 0xdfd29000-0xdfffffff] |
| [ 0.470073] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| [ 0.470073] NetLabel: Initializing |
| [ 0.470073] NetLabel: domain hash size = 128 |
| [ 0.470073] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.470073] NetLabel: unlabeled traffic allowed by default |
| [ 0.470073] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.470073] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.471850] clocksource: Switched to clocksource tsc-early |
| [ 0.485378] VFS: Disk quotas dquot_6.6.0 |
| [ 0.485400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.485436] *** VALIDATE hugetlbfs *** |
| [ 0.485490] pnp: PnP ACPI init |
| [ 0.485704] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| [ 0.485711] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.485740] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.485895] pnp: PnP ACPI: found 2 devices |
| [ 0.492645] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.492657] pci 0000:00:02.0: PCI bridge to [bus 01] |
| [ 0.492660] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| [ 0.492663] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| [ 0.492666] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.492669] pci 0000:00:14.4: PCI bridge to [bus 02] |
| [ 0.492679] pci 0000:00:15.0: PCI bridge to [bus 03] |
| [ 0.492686] pci 0000:00:15.1: PCI bridge to [bus 04] |
| [ 0.492690] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff] |
| [ 0.492696] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.492698] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.492699] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.492701] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.492702] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 0.492703] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.492705] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff] |
| [ 0.492706] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.492708] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.492709] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] |
| [ 0.492710] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.492712] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.492713] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 0.492714] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff] |
| [ 0.492770] NET: Registered protocol family 2 |
| [ 0.492936] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.492971] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.493131] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.493347] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.493401] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.493436] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.493555] NET: Registered protocol family 1 |
| [ 0.493562] NET: Registered protocol family 44 |
| [ 0.494849] pci 0000:00:12.2: PME# does not work under D3, disabling it |
| [ 0.495149] pci 0000:00:13.2: PME# does not work under D3, disabling it |
| [ 0.495629] pci 0000:00:16.2: PME# does not work under D3, disabling it |
| [ 0.495659] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.495864] PCI: CLS 64 bytes, default 64 |
| [ 0.495914] Trying to unpack rootfs image as initramfs... |
| [ 2.121392] Freeing initrd memory: 13956K |
| [ 2.121396] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 2.121397] software IO TLB: mapped [mem 0xdbd29000-0xdfd29000] (64MB) |
| [ 2.121460] amd_uncore: AMD NB counters detected |
| [ 2.121651] LVT offset 0 assigned for vector 0x400 |
| [ 2.121698] perf: AMD IBS detected (0x000000ff) |
| [ 2.121760] check: Scanning for low memory corruption every 60 seconds |
| [ 2.122444] Initialise system trusted keyrings |
| [ 2.122454] Key type blacklist registered |
| [ 2.122588] workingset: timestamp_bits=41 max_order=21 bucket_order=0 |
| [ 2.124372] zbud: loaded |
| [ 2.126567] Key type asymmetric registered |
| [ 2.126569] Asymmetric key parser 'x509' registered |
| [ 2.126588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) |
| [ 2.126667] io scheduler mq-deadline registered |
| [ 2.126669] io scheduler kyber registered |
| [ 2.126730] io scheduler bfq registered |
| [ 2.127135] pcieport 0000:00:02.0: PME: Signaling with IRQ 24 |
| [ 2.127327] pcieport 0000:00:15.0: PME: Signaling with IRQ 25 |
| [ 2.127449] pcieport 0000:00:15.1: PME: Signaling with IRQ 26 |
| [ 2.127518] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.127653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 2.129743] ACPI: Power Button [PWRB] |
| [ 2.129835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 2.133074] ACPI: Power Button [PWRF] |
| [ 2.133520] GHES: Failed to enable APEI firmware first mode. |
| [ 2.133669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.154250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.174857] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.175831] usbcore: registered new interface driver usbserial_generic |
| [ 2.175838] usbserial: USB Serial support registered for generic |
| [ 2.175867] rtc_cmos 00:01: RTC can wake from S4 |
| [ 2.175989] rtc_cmos 00:01: registered as rtc0 |
| [ 2.176010] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 2.176120] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.176389] NET: Registered protocol family 10 |
| [ 2.184937] Segment Routing with IPv6 |
| [ 2.184965] NET: Registered protocol family 17 |
| [ 2.185297] mce: Using 7 MCE banks |
| [ 2.185314] RAS: Correctable Errors collector initialized. |
| [ 2.185328] sched_clock: Marking stable (2179042905, 6211017)->(2295158915, -109904993) |
| [ 2.185592] registered taskstats version 1 |
| [ 2.185600] Loading compiled-in X.509 certificates |
| [ 2.190789] Loaded X.509 cert 'Build time autogenerated kernel key: ef3636ed28a9aed0a789e2f5b65527af2ed62ee5' |
| [ 2.190822] zswap: loaded using pool lzo/zbud |
| [ 2.199521] Key type big_key registered |
| [ 2.199876] PM: Magic number: 3:600:858 |
| [ 2.199969] rtc_cmos 00:01: setting system clock to 2019-09-18T23:50:59 UTC (1568850659) |
| [ 2.202228] Freeing unused decrypted memory: 2040K |
| [ 2.202791] Freeing unused kernel image memory: 1608K |
| [ 2.236446] Write protecting the kernel read-only data: 18432k |
| [ 2.237155] Freeing unused kernel image memory: 2012K |
| [ 2.237311] Freeing unused kernel image memory: 224K |
| [ 2.248659] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.248667] Run /init as init process |
| [ 2.276294] printk: console [netcon0] enabled |
| [ 2.276295] netconsole: network logging started |
| [ 2.333926] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.334791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.334793] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after |
| [ 2.336031] ehci-pci: EHCI PCI platform driver |
| [ 2.336276] QUIRK: Enable AMD PLL fix |
| [ 2.336301] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.336319] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.336326] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.336335] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.336392] ehci-pci 0000:00:12.2: irq 17, io mem 0xf3289000 |
| [ 2.345299] SCSI subsystem initialized |
| [ 2.348616] cryptd: max_cpu_qlen set to 1000 |
| [ 2.349687] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.349769] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.349772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.349774] usb usb1: Product: EHCI Host Controller |
| [ 2.349776] usb usb1: Manufacturer: Linux 5.2.5-gnu-1 ehci_hcd |
| [ 2.349777] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.349912] hub 1-0:1.0: USB hub found |
| [ 2.349926] hub 1-0:1.0: 5 ports detected |
| [ 2.350447] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.350455] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.350460] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.350470] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.350506] ehci-pci 0000:00:13.2: irq 17, io mem 0xf328a000 |
| [ 2.353800] libata version 3.00 loaded. |
| [ 2.357803] ahci 0000:00:11.0: version 3.0 |
| [ 2.358070] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode |
| [ 2.358074] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio |
| [ 2.359132] scsi host0: ahci |
| [ 2.359338] scsi host1: ahci |
| [ 2.359503] scsi host2: ahci |
| [ 2.359680] scsi host3: ahci |
| [ 2.359847] scsi host4: ahci |
| [ 2.360018] scsi host5: ahci |
| [ 2.360185] scsi host6: ahci |
| [ 2.360344] scsi host7: ahci |
| [ 2.360441] ata1: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288100 irq 19 |
| [ 2.360444] ata2: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288180 irq 19 |
| [ 2.360446] ata3: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288200 irq 19 |
| [ 2.360448] ata4: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288280 irq 19 |
| [ 2.360450] ata5: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288300 irq 19 |
| [ 2.360452] ata6: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288380 irq 19 |
| [ 2.360454] ata7: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288400 irq 19 |
| [ 2.360456] ata8: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288480 irq 19 |
| [ 2.361068] AVX version of gcm_enc/dec engaged. |
| [ 2.361070] AES CTR mode by8 optimization enabled |
| [ 2.363079] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.363875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.363878] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.363880] usb usb2: Product: EHCI Host Controller |
| [ 2.363882] usb usb2: Manufacturer: Linux 5.2.5-gnu-1 ehci_hcd |
| [ 2.363884] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.364174] hub 2-0:1.0: USB hub found |
| [ 2.364186] hub 2-0:1.0: 5 ports detected |
| [ 2.364585] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 2.364597] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 |
| [ 2.423968] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 |
| [ 2.424260] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.424262] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.424264] usb usb3: Product: xHCI Host Controller |
| [ 2.424265] usb usb3: Manufacturer: Linux 5.2.5-gnu-1 xhci-hcd |
| [ 2.424266] usb usb3: SerialNumber: 0000:04:00.0 |
| [ 2.424413] hub 3-0:1.0: USB hub found |
| [ 2.424427] hub 3-0:1.0: 2 ports detected |
| [ 2.424631] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 2.424638] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 |
| [ 2.424645] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed |
| [ 2.424678] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.424681] ehci-pci 0000:00:16.2: EHCI Host Controller |
| [ 2.424718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 |
| [ 2.424720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.424721] usb usb4: Product: xHCI Host Controller |
| [ 2.424722] usb usb4: Manufacturer: Linux 5.2.5-gnu-1 xhci-hcd |
| [ 2.424724] usb usb4: SerialNumber: 0000:04:00.0 |
| [ 2.424836] hub 4-0:1.0: USB hub found |
| [ 2.424849] hub 4-0:1.0: 2 ports detected |
| [ 2.425073] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 |
| [ 2.425083] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.425094] ehci-pci 0000:00:16.2: debug port 1 |
| [ 2.425137] ehci-pci 0000:00:16.2: irq 17, io mem 0xf328b000 |
| [ 2.436418] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| [ 2.436506] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.436508] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.436509] usb usb5: Product: EHCI Host Controller |
| [ 2.436510] usb usb5: Manufacturer: Linux 5.2.5-gnu-1 ehci_hcd |
| [ 2.436512] usb usb5: SerialNumber: 0000:00:16.2 |
| [ 2.436777] hub 5-0:1.0: USB hub found |
| [ 2.436792] hub 5-0:1.0: 4 ports detected |
| [ 2.438441] ohci-pci: OHCI PCI platform driver |
| [ 2.438597] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.438604] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 |
| [ 2.438642] ohci-pci 0000:00:12.0: irq 18, io mem 0xf3284000 |
| [ 2.497165] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.497168] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.497170] usb usb6: Product: OHCI PCI host controller |
| [ 2.497171] usb usb6: Manufacturer: Linux 5.2.5-gnu-1 ohci_hcd |
| [ 2.497172] usb usb6: SerialNumber: 0000:00:12.0 |
| [ 2.497401] hub 6-0:1.0: USB hub found |
| [ 2.497412] hub 6-0:1.0: 5 ports detected |
| [ 2.497755] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.497761] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 |
| [ 2.497788] ohci-pci 0000:00:13.0: irq 18, io mem 0xf3285000 |
| [ 2.557176] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.557179] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.557181] usb usb7: Product: OHCI PCI host controller |
| [ 2.557182] usb usb7: Manufacturer: Linux 5.2.5-gnu-1 ohci_hcd |
| [ 2.557183] usb usb7: SerialNumber: 0000:00:13.0 |
| [ 2.557414] hub 7-0:1.0: USB hub found |
| [ 2.557425] hub 7-0:1.0: 5 ports detected |
| [ 2.557773] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.557780] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 |
| [ 2.557806] ohci-pci 0000:00:14.5: irq 18, io mem 0xf3286000 |
| [ 2.617113] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.617116] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.617117] usb usb8: Product: OHCI PCI host controller |
| [ 2.617119] usb usb8: Manufacturer: Linux 5.2.5-gnu-1 ohci_hcd |
| [ 2.617120] usb usb8: SerialNumber: 0000:00:14.5 |
| [ 2.617487] hub 8-0:1.0: USB hub found |
| [ 2.617499] hub 8-0:1.0: 2 ports detected |
| [ 2.617791] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| [ 2.617797] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 |
| [ 2.617826] ohci-pci 0000:00:16.0: irq 18, io mem 0xf3287000 |
| [ 2.674336] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.674395] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.676732] ata2.00: supports DRM functions and may not be fully accessible |
| [ 2.677158] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.677160] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.677169] usb usb9: Product: OHCI PCI host controller |
| [ 2.677170] usb usb9: Manufacturer: Linux 5.2.5-gnu-1 ohci_hcd |
| [ 2.677172] ata2.00: ATA-11: Samsung SSD 860 QVO 2TB, RVQ01B6Q, max UDMA/133 |
| [ 2.677173] usb usb9: SerialNumber: 0000:00:16.0 |
| [ 2.677175] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.677339] hub 9-0:1.0: USB hub found |
| [ 2.677350] hub 9-0:1.0: 4 ports detected |
| [ 2.677741] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 2.677766] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.677793] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.677816] ata7: SATA link down (SStatus 0 SControl 300) |
| [ 2.677838] ata8: SATA link down (SStatus 0 SControl 300) |
| [ 2.678960] ata2.00: supports DRM functions and may not be fully accessible |
| [ 2.679660] usb 1-2: new high-speed USB device number 2 using ehci-pci |
| [ 2.680899] ata2.00: configured for UDMA/133 |
| [ 2.681233] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 |
| [ 2.828368] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 |
| [ 2.828371] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 2.828373] usb 1-2: Product: USB2.0 Hub |
| [ 2.829814] hub 1-2:1.0: USB hub found |
| [ 2.830242] hub 1-2:1.0: 4 ports detected |
| [ 2.956410] usb 1-3: new high-speed USB device number 3 using ehci-pci |
| [ 3.104945] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 |
| [ 3.104948] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.104950] usb 1-3: Product: USB2.0 Hub |
| [ 3.105346] hub 1-3:1.0: USB hub found |
| [ 3.105690] hub 1-3:1.0: 4 ports detected |
| [ 3.129750] tsc: Refined TSC clocksource calibration: 3200.268 MHz |
| [ 3.129760] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2147347fa, max_idle_ns: 440795288940 ns |
| [ 3.129782] clocksource: Switched to clocksource tsc |
| [ 3.176412] usb 1-2.2: new low-speed USB device number 4 using ehci-pci |
| [ 3.280745] usb 1-2.2: New USB device found, idVendor=0e6a, idProduct=6001, bcdDevice= 0.07 |
| [ 3.280748] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.280750] usb 1-2.2: Product: HID Keyboard Device |
| [ 3.292471] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.301463] usbcore: registered new interface driver usbhid |
| [ 3.301465] usbhid: USB HID core driver |
| [ 3.303620] input: HID Keyboard Device as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/0003:0E6A:6001.0001/input/input2 |
| [ 3.359986] hid-generic 0003:0E6A:6001.0001: input,hidraw0: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:12.2-2.2/input0 |
| [ 3.360273] input: HID Keyboard Device Consumer Control as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E6A:6001.0002/input/input3 |
| [ 3.396405] usb 1-4: new high-speed USB device number 5 using ehci-pci |
| [ 3.416490] input: HID Keyboard Device System Control as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E6A:6001.0002/input/input4 |
| [ 3.416582] hid-generic 0003:0E6A:6001.0002: input,hidraw1: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:12.2-2.2/input1 |
| [ 3.545013] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 |
| [ 3.545016] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.545017] usb 1-4: Product: USB2.0 Hub |
| [ 3.545418] hub 1-4:1.0: USB hub found |
| [ 3.545758] hub 1-4:1.0: 4 ports detected |
| [ 3.616413] usb 1-2.3: new low-speed USB device number 6 using ehci-pci |
| [ 3.718809] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c025, bcdDevice=98.02 |
| [ 3.718812] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.718814] usb 1-2.3: Product: USB-PS/2 Optical Mouse |
| [ 3.718815] usb 1-2.3: Manufacturer: B16_b_02 |
| [ 3.723909] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C025.0003/input/input5 |
| [ 3.723975] hid-generic 0003:046D:C025.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:12.2-2.3/input0 |
| [ 3.786408] usb 1-3.3: new high-speed USB device number 7 using ehci-pci |
| [ 3.883702] usb 1-3.3: New USB device found, idVendor=0525, idProduct=a4a7, bcdDevice= 5.02 |
| [ 3.883705] usb 1-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 7.719736] ata4: link is slow to respond, please be patient (ready=0) |
| [ 12.366405] ata4: COMRESET failed (errno=-16) |
| [ 17.723068] ata4: link is slow to respond, please be patient (ready=0) |
| [ 22.369733] ata4: COMRESET failed (errno=-16) |
| [ 27.726404] ata4: link is slow to respond, please be patient (ready=0) |
| [ 57.419726] ata4: COMRESET failed (errno=-16) |
| [ 62.436392] ata4: COMRESET failed (errno=-16) |
| [ 62.436465] ata4: reset failed, giving up |
| [ 62.443785] ata2.00: Enabling discard_zeroes_data |
| [ 62.443894] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 62.443921] sd 1:0:0:0: [sda] Write Protect is off |
| [ 62.443925] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 62.443978] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 62.444195] ata2.00: Enabling discard_zeroes_data |
| [ 62.446904] sda: sda1 |
| [ 62.447337] ata2.00: Enabling discard_zeroes_data |
| [ 62.449045] sd 1:0:0:0: [sda] supports TCG Opal |
| [ 62.449048] sd 1:0:0:0: [sda] Attached SCSI disk |
| [ 62.464098] random: fast init done |
| [ 62.471405] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 62.486238] device-mapper: uevent: version 1.0.3 |
| [ 62.486331] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 62.487384] random: lvm: uninitialized urandom read (2 bytes read) |
| [ 67.561638] random: cryptsetup: uninitialized urandom read (2 bytes read) |
| [ 67.576178] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 67.587250] random: lvm: uninitialized urandom read (2 bytes read) |
| [ 78.770042] random: crng init done |
| [ 194.700065] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 194.978092] systemd[1]: systemd 243.0-1.par1-parabola running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 194.993123] systemd[1]: Detected architecture x86-64. |
| [ 195.002003] systemd[1]: Set hostname to <f2a85m-pro>. |
| [ 195.408744] systemd[1]: /usr/lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. |
| [ 195.409793] systemd[1]: /usr/lib/systemd/system/virtlogd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly. |
| [ 195.425037] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. |
| [ 195.426143] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. |
| [ 195.457361] systemd[1]: Created slice Virtual Machine and Container Slice. |
| [ 195.458301] systemd[1]: Created slice system-coreboot.slice. |
| [ 195.458956] systemd[1]: Created slice system-getty.slice. |
| [ 195.554098] usbcore: registered new device driver usbip-host |
| [ 196.054671] audit: type=1130 audit(1568850853.349:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.065578] systemd-journald[396]: Received client request to flush runtime journal. |
| [ 196.287458] audit: type=1130 audit(1568850853.583:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.434466] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 196.434470] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection |
| [ 196.434653] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 196.449009] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver |
| [ 196.449124] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address |
| [ 196.452010] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) |
| [ 196.481066] Linux agpgart interface v0.103 |
| [ 196.539135] cdc_acm 1-3.3:1.0: ttyACM0: USB ACM device |
| [ 196.546416] cdc_acm 1-3.3:1.2: ttyACM1: USB ACM device |
| [ 196.553750] usbcore: registered new interface driver cdc_acm |
| [ 196.553752] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 196.582109] cdc_ether 1-3.3:1.4 usb0: register 'cdc_ether' at usb-0000:00:12.2-3.3, CDC Ethernet Device, ea:ac:c4:62:bc:a2 |
| [ 196.582163] usbcore: registered new interface driver cdc_ether |
| [ 196.593095] mousedev: PS/2 mouse device common for all mice |
| [ 196.717861] audit: type=1130 audit(1568850854.013:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.720583] snd_hda_intel 0000:01:00.1: Disabling MSI |
| [ 196.720594] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client |
| [ 196.746346] Adding 16777212k swap on /dev/mapper/F2A85M_PRO-swap. Priority:-2 extents:1 across:16777212k SSFS |
| [ 196.746377] kvm: Nested Virtualization enabled |
| [ 196.746380] kvm: Nested Paging enabled |
| [ 196.754174] MCE: In-kernel MCE decoding enabled. |
| [ 196.771151] snd_hda_codec_realtek hdaudioC0D0: ALC892: SKU not ready 0x00000100 |
| [ 196.772005] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 196.772008] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 196.772010] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 196.772012] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 196.772014] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 |
| [ 196.772015] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 196.772017] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 196.772019] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 |
| [ 196.772021] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a |
| [ 196.772022] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c |
| [ 196.774026] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 196.774029] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 196.774907] EXT4-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended |
| [ 196.776359] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 196.792918] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 |
| [ 196.793013] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 |
| [ 196.793099] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 |
| [ 196.793192] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| [ 196.793264] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| [ 196.793365] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 |
| [ 196.793430] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 |
| [ 196.793494] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 |
| [ 196.793580] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 |
| [ 196.840892] audit: type=1130 audit(1568850854.136:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.899589] audit: type=1130 audit(1568850854.193:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.908380] audit: type=1127 audit(1568850854.203:7): pid=481 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success' |
| [ 196.913263] audit: type=1130 audit(1568850854.209:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.928645] audit: type=1130 audit(1568850854.223:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.930578] audit: type=1130 audit(1568850854.226:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=guix-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 196.949127] nct6775: Refusing to enable a Super-I/O device with a base I/O port 0 |
| [ 196.957255] audit: type=1130 audit(1568850854.253:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 197.029934] nouveau 0000:01:00.0: NVIDIA GF119 (0d90a0a1) |
| [ 197.093200] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 197.096109] device usb0 entered promiscuous mode |
| [ 197.108339] lan0: port 1(usb0) entered blocking state |
| [ 197.108356] lan0: port 1(usb0) entered disabled state |
| [ 197.110104] lan0: port 1(usb0) entered blocking state |
| [ 197.110106] lan0: port 1(usb0) entered forwarding state |
| [ 197.226920] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 |
| [ 197.226986] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 |
| [ 197.243190] nouveau 0000:01:00.0: bios: version 75.19.55.00.02 |
| [ 197.259981] nouveau 0000:01:00.0: fb: 1024 MiB DDR3 |
| [ 197.378138] [TTM] Zone kernel: Available graphics memory: 4074034 KiB |
| [ 197.378141] [TTM] Zone dma32: Available graphics memory: 2097152 KiB |
| [ 197.378142] [TTM] Initializing pool allocator |
| [ 197.378146] [TTM] Initializing DMA pool allocator |
| [ 197.378766] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB |
| [ 197.378769] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB |
| [ 197.378774] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 |
| [ 197.378776] nouveau 0000:01:00.0: DRM: DCB version 4.0 |
| [ 197.378779] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000 |
| [ 197.378782] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 |
| [ 197.378784] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010 |
| [ 197.378786] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000 |
| [ 197.378788] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 |
| [ 197.378790] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 |
| [ 197.378792] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 |
| [ 197.383652] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies |
| [ 197.385967] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 197.385968] [drm] Driver supports precise vblank timestamp query. |
| [ 197.508500] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 000000008166ea3e |
| [ 197.509003] fbcon: nouveaudrmfb (fb0) is primary device |
| [ 197.565621] Console: switching to colour frame buffer device 210x65 |
| [ 197.568892] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device |
| [ 197.596720] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 |
| [ 198.116375] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready |
| [ 199.065442] tun: Universal TUN/TAP device driver, 1.6 |
| [ 199.066853] virbr-lxc0: port 1(virbr-lxc0-nic) entered blocking state |
| [ 199.066867] virbr-lxc0: port 1(virbr-lxc0-nic) entered disabled state |
| [ 199.066920] device virbr-lxc0-nic entered promiscuous mode |
| [ 199.466520] virbr-lxc0: port 1(virbr-lxc0-nic) entered blocking state |
| [ 199.466523] virbr-lxc0: port 1(virbr-lxc0-nic) entered listening state |
| [ 199.536762] virbr-lxc0: port 1(virbr-lxc0-nic) entered disabled state |
| [ 200.410715] fuse: init (API version 7.31) |
| [ 201.233267] lan0: port 2(vnet0) entered blocking state |
| [ 201.233271] lan0: port 2(vnet0) entered disabled state |
| [ 201.233338] device vnet0 entered promiscuous mode |
| [ 201.233863] kauditd_printk_skb: 68 callbacks suppressed |
| [ 201.233865] audit: type=1700 audit(1568850858.529:80): dev=vnet0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295 |
| [ 201.386780] eth0: renamed from vnet1 |
| [ 201.412131] audit: type=2501 audit(1568850858.706:81): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=fs reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-fs="?" new-fs="/srv/distros/debian" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412152] audit: type=2501 audit(1568850858.706:82): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=fs reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-fs="?" new-fs="/home/replicant/replicant-6.0" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412178] audit: type=2501 audit(1568850858.706:83): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=net reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-net="?" new-net="00:16:3e:84:98:a6" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412199] audit: type=2501 audit(1568850858.706:84): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/0" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412220] audit: type=2501 audit(1568850858.706:85): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/1" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412237] audit: type=2501 audit(1568850858.706:86): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/2" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412254] audit: type=2501 audit(1568850858.706:87): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/3" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412271] audit: type=2501 audit(1568850858.706:88): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/4" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.412287] audit: type=2501 audit(1568850858.706:89): pid=576 uid=0 auid=4294967295 ses=4294967295 msg='virt=lxc resrc=chardev reason=start vm="debian" uuid=9b87a043-6ec7-4cf3-8c6f-cea17d868535 old-chardev="?" new-chardev="/dev/pts/5" exe="/usr/bin/libvirtd" hostname=? addr=? terminal=? res=success' |
| [ 201.421510] lan0: port 3(vnet1) entered blocking state |
| [ 201.421525] lan0: port 3(vnet1) entered disabled state |
| [ 201.421583] device vnet1 entered promiscuous mode |
| [ 201.421649] lan0: port 3(vnet1) entered blocking state |
| [ 201.421651] lan0: port 3(vnet1) entered forwarding state |
| [ 201.583204] eth0: renamed from vnet2 |
| [ 201.876779] lan0: port 3(vnet1) entered disabled state |
| [ 201.876801] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 201.876849] IPv6: ADDRCONF(NETDEV_CHANGE): vnet0: link becomes ready |
| [ 201.876883] lan0: port 2(vnet0) entered blocking state |
| [ 201.876885] lan0: port 2(vnet0) entered forwarding state |
| [ 202.077018] IPv6: ADDRCONF(NETDEV_CHANGE): vnet1: link becomes ready |
| [ 202.077052] lan0: port 3(vnet1) entered blocking state |
| [ 202.077054] lan0: port 3(vnet1) entered forwarding state |