| [ 0.000000] Linux version 4.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1 (2018-01-14) |
| [ 0.000000] Command line: BOOT_IMAGE=(ahci0,msdos1)/vmlinuz root=/dev/mapper/sda3_crypt rootflags=subvol=@ iomem=relaxed ro quiet |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfefffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] random: fast init done |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.7-263-gf9d9781292 02/06/2018 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x23d600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable |
| [ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffffa062c0099000] 99000 size 24576 |
| [ 0.000000] reserving inaccessible SNB gfx pages |
| [ 0.000000] BRK [0xade05000, 0xade05fff] PGTABLE |
| [ 0.000000] BRK [0xade06000, 0xade06fff] PGTABLE |
| [ 0.000000] BRK [0xade07000, 0xade07fff] PGTABLE |
| [ 0.000000] BRK [0xade08000, 0xade08fff] PGTABLE |
| [ 0.000000] BRK [0xade09000, 0xade09fff] PGTABLE |
| [ 0.000000] BRK [0xade0a000, 0xade0afff] PGTABLE |
| [ 0.000000] BRK [0xade0b000, 0xade0bfff] PGTABLE |
| [ 0.000000] BRK [0xade0c000, 0xade0cfff] PGTABLE |
| [ 0.000000] BRK [0xade0d000, 0xade0dfff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x353c3000-0x369d8fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFF120E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFF15700 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFF12280 003474 (v02 COREv4 COREBOOT 20110725 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000BFF12240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000BFF12240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFF15800 0019AF (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x00000000BFF171B0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x00000000BFF171F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFF17230 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x00000000BFF172A0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFF19350 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023d5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x23d5f8000-0x23d5fcfff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] |
| [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] |
| [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfefffff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff] |
| [ 0.000000] On node 0 totalpages: 2085023 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 159 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12204 pages used for memmap |
| [ 0.000000] DMA32 zone: 781056 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 20312 pages used for memmap |
| [ 0.000000] Normal zone: 1299968 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 44 pages/cpu @ffffa064fd200000 s142232 r8192 d29800 u524288 |
| [ 0.000000] pcpu-alloc: s142232 r8192 d29800 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2052284 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/vmlinuz root=/dev/mapper/sda3_crypt rootflags=subvol=@ iomem=relaxed ro quiet |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 8096380K/8340092K available (10252K kernel code, 1146K rwdata, 3040K rodata, 1508K init, 664K bss, 243712K reserved, 0K cma-reserved) |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] ftrace: allocating 29024 entries in 114 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 2494.328 MHz processor |
| [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.65 BogoMIPS (lpj=9977312) |
| [ 0.004000] pid_max: default: 32768 minimum: 301 |
| [ 0.004000] ACPI: Core revision 20170728 |
| [ 0.009506] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.009539] Security Framework initialized |
| [ 0.009541] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.009555] AppArmor: AppArmor initialized |
| [ 0.010632] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.011190] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.011226] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.011243] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.011437] CPU: Physical Processor ID: 0 |
| [ 0.011437] CPU: Processor Core ID: 0 |
| [ 0.011446] mce: CPU supports 7 MCE banks |
| [ 0.011453] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.011462] process: using mwait in idle threads |
| [ 0.011464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.011465] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.011561] Freeing SMP alternatives memory: 28K |
| [ 0.012718] smpboot: Max logical packages: 2 |
| [ 0.012723] DMAR: Host address width 36 |
| [ 0.012725] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.012733] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.012734] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.012738] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.012740] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.012741] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.012742] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.013090] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.013091] x2apic enabled |
| [ 0.013097] Switched APIC routing to cluster x2apic. |
| [ 0.013562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.053263] TSC deadline timer enabled |
| [ 0.053266] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) |
| [ 0.053352] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.053375] ... version: 3 |
| [ 0.053376] ... bit width: 48 |
| [ 0.053376] ... generic registers: 4 |
| [ 0.053377] ... value mask: 0000ffffffffffff |
| [ 0.053377] ... max period: 00007fffffffffff |
| [ 0.053378] ... fixed-purpose events: 3 |
| [ 0.053379] ... event mask: 000000070000000f |
| [ 0.053415] Hierarchical SRCU implementation. |
| [ 0.054005] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.054020] smp: Bringing up secondary CPUs ... |
| [ 0.054105] x86: Booting SMP configuration: |
| [ 0.054106] .... node #0, CPUs: #1 #2 #3 |
| [ 0.058408] smp: Brought up 1 node, 4 CPUs |
| [ 0.058408] smpboot: Total of 4 processors activated (19954.62 BogoMIPS) |
| [ 0.060318] devtmpfs: initialized |
| [ 0.060318] x86/mm: Memory block size: 128MB |
| [ 0.060776] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.060776] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.060776] pinctrl core: initialized pinctrl subsystem |
| [ 0.060776] NET: Registered protocol family 16 |
| [ 0.060776] cpuidle: using governor ladder |
| [ 0.060776] cpuidle: using governor menu |
| [ 0.060776] ACPI: bus type PCI registered |
| [ 0.060776] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.060776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| [ 0.060776] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| [ 0.060776] PCI: Using configuration type 1 for base access |
| [ 0.060776] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.060776] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.060776] ACPI: Added _OSI(Module Device) |
| [ 0.060776] ACPI: Added _OSI(Processor Device) |
| [ 0.060776] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.060776] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.060776] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.065075] ACPI: EC: EC started |
| [ 0.065075] ACPI: EC: interrupt blocked |
| [ 0.065125] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.065127] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.065129] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.065129] ACPI: Interpreter enabled |
| [ 0.065146] ACPI: (supports S0 S3 S4 S5) |
| [ 0.065147] ACPI: Using IOAPIC for interrupt routing |
| [ 0.065165] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.065285] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.071071] ACPI: Power Resource [FPWR] (off) |
| [ 0.071382] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.071386] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.071434] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.071443] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.071637] PCI host bridge to bus 0000:00 |
| [ 0.071639] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.071640] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.071641] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.071642] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.071644] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.071645] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.071646] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.071647] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.071648] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.071649] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.071650] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.071652] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.071653] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.071654] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.071655] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.071656] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.071657] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xf7ffffff window] |
| [ 0.071658] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.071660] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.071667] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| [ 0.071752] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| [ 0.071761] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit] |
| [ 0.071766] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.071770] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.071840] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000 |
| [ 0.071849] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) |
| [ 0.071947] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.071966] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff] |
| [ 0.071975] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff] |
| [ 0.071983] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.072043] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.072110] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.072131] pci 0000:00:1a.0: reg 0x10: [mem 0xf162f000-0xf162f3ff] |
| [ 0.072213] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.072236] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.072236] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit] |
| [ 0.072236] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.072240] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.072323] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.072399] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| [ 0.072484] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.072559] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 |
| [ 0.072637] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.072714] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| [ 0.072798] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.072875] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| [ 0.073012] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.073095] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400 |
| [ 0.073220] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| [ 0.073306] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.073328] pci 0000:00:1d.0: reg 0x10: [mem 0xf1630000-0xf16303ff] |
| [ 0.073410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.073479] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| [ 0.073647] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| [ 0.073667] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.073675] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.073683] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.073692] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.073700] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.073708] pci 0000:00:1f.2: reg 0x24: [mem 0xf162e000-0xf162e7ff] |
| [ 0.073752] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.073814] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.073833] pci 0000:00:1f.3: reg 0x10: [mem 0xf1631000-0xf16310ff 64bit] |
| [ 0.073853] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.073933] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000 |
| [ 0.073957] pci 0000:00:1f.6: reg 0x10: [mem 0xf162d000-0xf162dfff 64bit] |
| [ 0.074108] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.074189] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.074245] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf147ffff 64bit] |
| [ 0.074328] pci 0000:02:00.0: reg 0x30: [mem 0xf1480000-0xf148ffff pref] |
| [ 0.074444] pci 0000:02:00.0: supports D1 D2 |
| [ 0.074445] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.084052] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.084066] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.084155] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.084228] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.084232] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.084235] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.084241] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.084339] pci 0000:05:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.084377] pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.084429] pci 0000:05:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff] |
| [ 0.084739] pci 0000:05:00.0: supports D1 D2 |
| [ 0.084740] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.096051] pci 0000:00:1c.4: PCI bridge to [bus 05] |
| [ 0.096065] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.096161] pci 0000:00:1c.5: PCI bridge to [bus 06] |
| [ 0.096309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096358] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096405] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096450] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096539] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096584] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.096629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.097636] ACPI: EC: interrupt unblocked |
| [ 0.097642] ACPI: EC: event unblocked |
| [ 0.097649] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.097650] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.097709] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.097709] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.097709] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.097709] vgaarb: loaded |
| [ 0.097709] EDAC MC: Ver: 3.0.0 |
| [ 0.097709] PCI: Using ACPI for IRQ routing |
| [ 0.097709] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.097709] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff] |
| [ 0.097709] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff] |
| [ 0.097709] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.097709] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.101021] clocksource: Switched to clocksource hpet |
| [ 0.109118] VFS: Disk quotas dquot_6.6.0 |
| [ 0.109142] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.109234] AppArmor: AppArmor Filesystem Enabled |
| [ 0.109252] pnp: PnP ACPI init |
| [ 0.109356] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.109358] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.109359] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.109360] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.109362] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| [ 0.109363] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.109364] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.109366] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.109367] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.109368] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.109373] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.109914] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.109918] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.109958] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.109960] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.109963] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.109982] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.110012] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.110039] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.110063] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.110081] pnp: PnP ACPI: found 7 devices |
| [ 0.116316] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.116378] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.116392] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.116398] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.116406] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.116417] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.116420] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.116425] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.116429] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.116435] pci 0000:00:1c.4: PCI bridge to [bus 05] |
| [ 0.116442] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.116454] pci 0000:00:1c.5: PCI bridge to [bus 06] |
| [ 0.116472] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.116473] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.116474] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.116475] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.116476] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.116477] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.116479] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.116480] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.116481] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.116482] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.116483] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.116484] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.116485] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.116486] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.116487] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.116488] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.116489] pci_bus 0000:00: resource 20 [mem 0xc2a00001-0xf7ffffff window] |
| [ 0.116491] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.116492] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff] |
| [ 0.116493] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| [ 0.116494] pci_bus 0000:04: resource 1 [mem 0xf0800000-0xf0ffffff] |
| [ 0.116496] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.116497] pci_bus 0000:05: resource 1 [mem 0xf1500000-0xf15fffff] |
| [ 0.116569] NET: Registered protocol family 2 |
| [ 0.116707] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.116828] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.116952] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.116990] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.117013] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.117087] NET: Registered protocol family 1 |
| [ 0.117100] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.117463] PCI: CLS 64 bytes, default 64 |
| [ 0.117508] Unpacking initramfs... |
| [ 0.514614] Freeing initrd memory: 22616K |
| [ 0.514659] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.514662] software IO TLB [mem 0xbbf00000-0xbff00000] (64MB) mapped at [ffffa0637bf00000-ffffa0637fefffff] |
| [ 0.515006] audit: initializing netlink subsys (disabled) |
| [ 0.515061] audit: type=2000 audit(1517934141.512:1): state=initialized audit_enabled=0 res=1 |
| [ 0.515368] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 0.515408] zbud: loaded |
| [ 0.891369] Key type asymmetric registered |
| [ 0.891370] Asymmetric key parser 'x509' registered |
| [ 0.891388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) |
| [ 0.891419] io scheduler noop registered |
| [ 0.891419] io scheduler deadline registered |
| [ 0.891433] io scheduler cfq registered (default) |
| [ 0.891434] io scheduler mq-deadline registered |
| [ 0.892459] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 0.892481] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 0.892500] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 0.892521] pcieport 0000:00:1c.3: Signaling PME with IRQ 29 |
| [ 0.892541] pcieport 0000:00:1c.4: Signaling PME with IRQ 30 |
| [ 0.892562] pcieport 0000:00:1c.5: Signaling PME with IRQ 31 |
| [ 0.892586] pciehp 0000:00:1c.3:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.892629] intel_idle: MWAIT substates: 0x21120 |
| [ 0.892629] intel_idle: v0.4.1 model 0x2A |
| [ 0.892767] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.893184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.893537] Linux agpgart interface v0.103 |
| [ 0.904053] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 0.936245] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.936246] AMD IOMMUv2 functionality not available on this system |
| [ 0.936577] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.939647] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.939794] mousedev: PS/2 mouse device common for all mice |
| [ 0.939832] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.939952] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.939979] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.939987] intel_pstate: Intel P-state driver initializing |
| [ 0.940211] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.940669] NET: Registered protocol family 10 |
| [ 0.941259] Segment Routing with IPv6 |
| [ 0.941294] mip6: Mobile IPv6 |
| [ 0.941298] NET: Registered protocol family 17 |
| [ 0.941303] mpls_gso: MPLS GSO support |
| [ 0.941963] microcode: sig=0x206a7, pf=0x10, revision=0x29 |
| [ 0.942220] microcode: Microcode Update Driver: v2.2. |
| [ 0.942254] sched_clock: Marking stable (942184959, 0)->(941320160, 864799) |
| [ 0.942905] registered taskstats version 1 |
| [ 0.942947] zswap: loaded using pool lzo/zbud |
| [ 0.943145] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.003413] rtc_cmos 00:03: setting system clock to 2018-02-06 16:22:22 UTC (1517934142) |
| [ 1.009758] Freeing unused kernel memory: 1508K |
| [ 1.009761] Write protecting the kernel read-only data: 16384k |
| [ 1.011222] Freeing unused kernel memory: 2012K |
| [ 1.016756] Freeing unused kernel memory: 1056K |
| [ 1.022021] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.022022] x86/mm: Checking user space page tables |
| [ 1.026957] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.142896] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.142898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.143185] PTP clock support registered |
| [ 1.145219] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.145220] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.145298] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.146124] ACPI: bus type USB registered |
| [ 1.146146] usbcore: registered new interface driver usbfs |
| [ 1.146155] usbcore: registered new interface driver hub |
| [ 1.146367] usbcore: registered new device driver usb |
| [ 1.147072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.147496] ehci-pci: EHCI PCI platform driver |
| [ 1.148425] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.148426] sdhci: Copyright(c) Pierre Ossman |
| [ 1.148775] sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.148939] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 1.149404] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.149406] ACPI: Thermal Zone [THM0] (54 C) |
| [ 1.150182] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.150183] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.150773] SCSI subsystem initialized |
| [ 1.152892] libata version 3.00 loaded. |
| [ 1.153080] mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA |
| [ 1.157922] AVX version of gcm_enc/dec engaged. |
| [ 1.157923] AES CTR mode by8 optimization enabled |
| [ 1.179818] alg: No test for pcbc(aes) (pcbc-aes-aesni) |
| [ 1.290394] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.413268] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5 |
| [ 1.413269] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.413327] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.413492] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.413503] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.413524] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.414300] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.417462] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.417498] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162f000 |
| [ 1.432156] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.432274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.432278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.432280] usb usb1: Product: EHCI Host Controller |
| [ 1.432282] usb usb1: Manufacturer: Linux 4.14.0-3-amd64 ehci_hcd |
| [ 1.432284] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.432630] hub 1-0:1.0: USB hub found |
| [ 1.432643] hub 1-0:1.0: 3 ports detected |
| [ 1.433259] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.433274] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.433300] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.437237] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.437268] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf1630000 |
| [ 1.452159] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.452297] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.452300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.452303] usb usb2: Product: EHCI Host Controller |
| [ 1.452306] usb usb2: Manufacturer: Linux 4.14.0-3-amd64 ehci_hcd |
| [ 1.452308] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.452768] hub 2-0:1.0: USB hub found |
| [ 1.452787] hub 2-0:1.0: 3 ports detected |
| [ 1.453535] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.454867] ahci 0000:00:1f.2: version 3.0 |
| [ 1.455278] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.465477] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.465482] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.466661] scsi host0: ahci |
| [ 1.466999] scsi host1: ahci |
| [ 1.467543] scsi host2: ahci |
| [ 1.467786] scsi host3: ahci |
| [ 1.467938] scsi host4: ahci |
| [ 1.468114] scsi host5: ahci |
| [ 1.468189] ata1: SATA max UDMA/133 abar m2048@0xf162e000 port 0xf162e100 irq 33 |
| [ 1.468193] ata2: SATA max UDMA/133 abar m2048@0xf162e000 port 0xf162e180 irq 33 |
| [ 1.468197] ata3: SATA max UDMA/133 abar m2048@0xf162e000 port 0xf162e200 irq 33 |
| [ 1.468198] ata4: DUMMY |
| [ 1.468199] ata5: DUMMY |
| [ 1.468200] ata6: DUMMY |
| [ 1.536048] tsc: Refined TSC clocksource calibration: 2494.333 MHz |
| [ 1.536064] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns |
| [ 1.757358] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| [ 1.768135] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.783958] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.786065] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.786518] ata1.00: disabling queued TRIM support |
| [ 1.786522] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133 |
| [ 1.786525] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 1.787335] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.787849] ata1.00: disabling queued TRIM support |
| [ 1.788115] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.788369] ata1.00: configured for UDMA/133 |
| [ 1.788888] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 |
| [ 1.925051] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.925058] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.925729] hub 1-1:1.0: USB hub found |
| [ 1.925812] hub 1-1:1.0: 6 ports detected |
| [ 1.944924] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.944931] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.945594] hub 2-1:1.0: USB hub found |
| [ 1.945749] hub 2-1:1.0: 8 ports detected |
| [ 2.103253] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.212127] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.232127] usb 2-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.322241] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 |
| [ 2.322248] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.322251] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.322254] usb 1-1.3: Manufacturer: UPEK |
| [ 2.343035] usb 2-1.3: string descriptor 0 read error: -22 |
| [ 2.343116] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 2.343120] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.400125] usb 1-1.6: new high-speed USB device number 4 using ehci-pci |
| [ 2.419714] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.424193] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 2.427347] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 2.427373] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.427376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.427411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.429575] sda: sda1 sda2 sda3 |
| [ 2.430017] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.493684] device-mapper: uevent: version 1.0.3 |
| [ 2.493800] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com |
| [ 2.541568] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d |
| [ 2.541574] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.541578] usb 2-1.4: Product: F5521gw |
| [ 2.541580] usb 2-1.4: Manufacturer: Ericsson |
| [ 2.541583] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0 |
| [ 2.560430] clocksource: Switched to clocksource tsc |
| [ 2.656117] usb 2-1.5: new full-speed USB device number 5 using ehci-pci |
| [ 2.767459] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6 |
| [ 2.767466] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.767469] usb 2-1.5: Product: ISD-V4 |
| [ 2.767472] usb 2-1.5: Manufacturer: Tablet |
| [ 2.772836] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.784339] usbcore: registered new interface driver usbhid |
| [ 2.784341] usbhid: USB HID core driver |
| [ 2.786721] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input3 |
| [ 2.786810] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 |
| [ 2.787125] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input7 |
| [ 2.787189] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 |
| [ 2.841807] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 |
| [ 2.841814] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.841817] usb 1-1.6: Product: Integrated Camera |
| [ 2.841820] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 6.566781] random: crng init done |
| [ 9.402323] NET: Registered protocol family 38 |
| [ 9.712013] raid6: sse2x1 gen() 9591 MB/s |
| [ 9.780009] raid6: sse2x1 xor() 6804 MB/s |
| [ 9.848011] raid6: sse2x2 gen() 11357 MB/s |
| [ 9.916008] raid6: sse2x2 xor() 7674 MB/s |
| [ 9.984010] raid6: sse2x4 gen() 13529 MB/s |
| [ 10.052008] raid6: sse2x4 xor() 8962 MB/s |
| [ 10.052009] raid6: using algorithm sse2x4 gen() 13529 MB/s |
| [ 10.052010] raid6: .... xor() 8962 MB/s, rmw enabled |
| [ 10.052011] raid6: using ssse3x2 recovery algorithm |
| [ 10.053387] xor: automatically using best checksumming function avx |
| [ 10.063545] Btrfs loaded, crc32c=crc32c-intel |
| [ 10.075906] BTRFS: device label root devid 1 transid 145497 /dev/mapper/sda3_crypt |
| [ 10.093071] BTRFS info (device dm-0): disk space caching is enabled |
| [ 10.093074] BTRFS info (device dm-0): has skinny extents |
| [ 10.234121] BTRFS info (device dm-0): enabling ssd optimizations |
| [ 10.759491] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 10.769605] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| [ 10.788223] systemd[1]: Detected architecture x86-64. |
| [ 10.788943] systemd[1]: Set hostname to <debianLaptop>. |
| [ 10.863813] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 10.863820] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 10.892925] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 10.892966] systemd[1]: Reached target Swap. |
| [ 10.892975] systemd[1]: Reached target Remote File Systems. |
| [ 10.892985] systemd[1]: Reached target User and Group Name Lookups. |
| [ 10.893136] systemd[1]: Created slice User and Session Slice. |
| [ 10.924574] BTRFS info (device dm-0): turning on discard |
| [ 10.924577] BTRFS info (device dm-0): use lzo compression |
| [ 10.924578] BTRFS info (device dm-0): disk space caching is enabled |
| [ 10.944795] lp: driver loaded but no devices found |
| [ 10.950052] ppdev: user-space parallel port driver |
| [ 10.993057] systemd-journald[330]: Received request to flush runtime journal from PID 1 |
| [ 11.009879] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) |
| [ 11.024466] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 11.065700] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input9 |
| [ 11.065729] ACPI: Sleep Button [SLPB] |
| [ 11.066001] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input10 |
| [ 11.066123] ACPI: Lid Switch [LID] |
| [ 11.066193] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 |
| [ 11.066205] ACPI: Power Button [PWRF] |
| [ 11.102474] ACPI: Battery Slot [BAT0] (battery present) |
| [ 11.102743] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 11.139970] ACPI: AC Adapter [AC] (off-line) |
| [ 11.140427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 11.141578] media: Linux media interface: v0.10 |
| [ 11.154388] Linux video capture interface: v2.00 |
| [ 11.155000] Non-volatile memory driver v1.3 |
| [ 11.156291] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device |
| [ 11.156347] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device |
| [ 11.156368] usbcore: registered new interface driver cdc_wdm |
| [ 11.182122] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device |
| [ 11.193695] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 11.193696] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 11.193697] thinkpad_acpi: ThinkPad BIOS CBET4000 4.7-263-gf9d9781292, EC 8DHT34WW-3.20 |
| [ 11.193698] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO |
| [ 11.195625] thinkpad_acpi: radio switch found; radios are enabled |
| [ 11.195736] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 11.195813] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 11.195813] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 11.196446] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247) |
| [ 11.196453] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.197534] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device |
| [ 11.198004] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 11.198010] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.198018] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 11.198023] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.198029] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 11.198033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.198034] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 11.198257] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device |
| [ 11.199584] usbcore: registered new interface driver cdc_acm |
| [ 11.199586] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 11.202044] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) |
| [ 11.204142] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 11.204145] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 11.204146] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 11.204225] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13 |
| [ 11.204557] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 11.204728] [drm] Memory usable by graphics device = 2048M |
| [ 11.204730] [drm] Replacing VGA console driver |
| [ 11.205952] Console: switching to colour dummy device 80x25 |
| [ 11.207665] usbcore: registered new interface driver uvcvideo |
| [ 11.207666] USB Video Class driver (1.1.1) |
| [ 11.215884] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 11.215987] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 11.222766] input: PC Speaker as /devices/platform/pcspkr/input/input14 |
| [ 11.225555] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12 |
| [ 11.232107] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00 |
| [ 11.232529] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00 |
| [ 11.232563] usbcore: registered new interface driver cdc_ncm |
| [ 11.233517] usbcore: registered new interface driver cdc_mbim |
| [ 11.247409] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 11.247411] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 11.247412] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 11.247413] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 11.257721] ath: phy0: ASPM enabled: 0x43 |
| [ 11.257724] ath: EEPROM regdomain: 0x6a |
| [ 11.257725] ath: EEPROM indicates we should expect a direct regpair map |
| [ 11.257727] ath: Country alpha2 being used: 00 |
| [ 11.257727] ath: Regpair used: 0x6a |
| [ 11.266315] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 11.266317] [drm] Driver supports precise vblank timestamp query. |
| [ 11.266667] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 11.292507] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 11.292894] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffb39b01480000, irq=17 |
| [ 11.309559] intel_rapl: Found RAPL domain package |
| [ 11.309561] intel_rapl: Found RAPL domain core |
| [ 11.309562] intel_rapl: Found RAPL domain uncore |
| [ 11.313648] Bluetooth: Core ver 2.22 |
| [ 11.313659] NET: Registered protocol family 31 |
| [ 11.313660] Bluetooth: HCI device and connection manager initialized |
| [ 11.313663] Bluetooth: HCI socket layer initialized |
| [ 11.313666] Bluetooth: L2CAP socket layer initialized |
| [ 11.313672] Bluetooth: SCO socket layer initialized |
| [ 11.369524] iTCO_vendor_support: vendor-support=0 |
| [ 11.369993] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0 |
| [ 11.370156] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 11.370932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 11.370970] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 11.372058] usbcore: registered new interface driver btusb |
| [ 11.373060] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 11.375985] acpi device:03: registered as cooling_device6 |
| [ 11.376069] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 |
| [ 11.385185] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0 |
| [ 11.387242] usb 2-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu |
| [ 11.396816] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 11.430478] usb 2-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu |
| [ 11.434044] usbcore: registered new interface driver ath3k |
| [ 11.584259] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 11.596522] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. |
| [ 11.596996] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| [ 11.596997] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 11.596998] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 11.596999] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 11.597000] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 11.597001] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 11.597002] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b |
| [ 11.597003] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 11.598294] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| [ 11.606850] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 11.607164] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 11.607228] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 11.607292] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 11.607354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| [ 11.607413] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 11.607473] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 11.607532] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 11.678744] usb 2-1.3: USB disconnect, device number 3 |
| [ 11.788740] fbcon: inteldrmfb (fb0) is primary device |
| [ 11.890620] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 11.900065] usb 2-1.3: new full-speed USB device number 6 using ehci-pci |
| [ 11.967073] audit: type=1400 audit(1517934153.457:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=630 comm="apparmor_parser" |
| [ 11.968231] audit: type=1400 audit(1517934153.457:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=631 comm="apparmor_parser" |
| [ 11.968339] audit: type=1400 audit(1517934153.461:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=629 comm="apparmor_parser" |
| [ 11.968341] audit: type=1400 audit(1517934153.461:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//filter" pid=629 comm="apparmor_parser" |
| [ 11.968343] audit: type=1400 audit(1517934153.461:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//groff" pid=629 comm="apparmor_parser" |
| [ 11.973003] audit: type=1400 audit(1517934153.465:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=633 comm="apparmor_parser" |
| [ 11.974940] audit: type=1400 audit(1517934153.465:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=635 comm="apparmor_parser" |
| [ 11.978979] audit: type=1400 audit(1517934153.469:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=632 comm="apparmor_parser" |
| [ 11.979674] audit: type=1400 audit(1517934153.469:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=636 comm="apparmor_parser" |
| [ 11.979676] audit: type=1400 audit(1517934153.469:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=636 comm="apparmor_parser" |
| [ 12.009729] usb 2-1.3: string descriptor 0 read error: -22 |
| [ 12.009738] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 12.009741] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 12.228546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 12.228547] Bluetooth: BNEP filters: protocol multicast |
| [ 12.228551] Bluetooth: BNEP socket layer initialized |
| [ 12.524152] Console: switching to colour frame buffer device 170x48 |
| [ 12.542796] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 12.647031] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device |
| [ 12.777084] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 12.845221] cdc_acm 2-1.4:2.1: ttyACM0: USB ACM device |
| [ 12.846126] cdc_acm 2-1.4:2.3: ttyACM1: USB ACM device |
| [ 12.849614] cdc_wdm 2-1.4:2.5: cdc-wdm0: USB WDM device |
| [ 12.877161] cdc_ncm 2-1.4:2.6: MAC-Address: 02:80:37:ec:02:00 |
| [ 13.036194] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 13.036436] cdc_ncm 2-1.4:2.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00 |
| [ 13.041643] cdc_wdm 2-1.4:2.8: cdc-wdm1: USB WDM device |
| [ 13.041740] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.054293] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.059099] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: renamed from wwan0 |
| [ 13.090680] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.211755] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 14.354461] cdc_wdm 2-1.4:2.8: wdm_int_callback - 0 bytes |
| [ 14.373567] cdc_wdm 2-1.4:2.5: wdm_int_callback - 0 bytes |
| [ 14.880215] Bluetooth: RFCOMM TTY layer initialized |
| [ 14.880221] Bluetooth: RFCOMM socket layer initialized |
| [ 14.880227] Bluetooth: RFCOMM ver 1.11 |
| [ 16.899677] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 20.577681] wlp2s0: authenticate with 76:6b:7f:17:4c:15 |
| [ 20.591400] wlp2s0: send auth to 76:6b:7f:17:4c:15 (try 1/3) |
| [ 20.595852] wlp2s0: authenticated |
| [ 20.600062] wlp2s0: associate with 76:6b:7f:17:4c:15 (try 1/3) |
| [ 20.604835] wlp2s0: RX AssocResp from 76:6b:7f:17:4c:15 (capab=0x431 status=0 aid=2) |
| [ 20.604988] wlp2s0: associated |
| [ 20.609622] ath: EEPROM regdomain: 0x817c |
| [ 20.609623] ath: EEPROM indicates we should expect a country code |
| [ 20.609624] ath: doing EEPROM country->regdmn map search |
| [ 20.609625] ath: country maps to regdmn code: 0x37 |
| [ 20.609626] ath: Country alpha2 being used: IT |
| [ 20.609626] ath: Regpair used: 0x37 |
| [ 20.609627] ath: regdomain 0x817c dynamically updated by country IE |
| [ 20.635858] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 23.003788] fuse init (API version 7.26) |
| [ 24.690760] rfkill: input handler disabled |