| [ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0 |
| [ 0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01) |
| [ 0.000000] Command line: BOOT_IMAGE=(ahci0,msdos1)/vmlinuz root=/dev/mapper/sda3_crypt rootflags=subvol=@ iomem=relaxed ro quiet |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bff01fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff02000-0x00000000bfffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] random: fast init done |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.6-1891-gbb98b38b93 10/22/2017 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x23d600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable |
| [ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0xbff02 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff937dc0099000] 99000 size 24576 |
| [ 0.000000] reserving inaccessible SNB gfx pages |
| [ 0.000000] BRK [0x18757000, 0x18757fff] PGTABLE |
| [ 0.000000] BRK [0x18758000, 0x18758fff] PGTABLE |
| [ 0.000000] BRK [0x18759000, 0x18759fff] PGTABLE |
| [ 0.000000] BRK [0x1875a000, 0x1875afff] PGTABLE |
| [ 0.000000] BRK [0x1875b000, 0x1875bfff] PGTABLE |
| [ 0.000000] BRK [0x1875c000, 0x1875cfff] PGTABLE |
| [ 0.000000] BRK [0x1875d000, 0x1875dfff] PGTABLE |
| [ 0.000000] BRK [0x1875e000, 0x1875efff] PGTABLE |
| [ 0.000000] BRK [0x1875f000, 0x1875ffff] PGTABLE |
| [ 0.000000] BRK [0x18760000, 0x18760fff] PGTABLE |
| [ 0.000000] BRK [0x18761000, 0x18761fff] PGTABLE |
| [ 0.000000] BRK [0x18762000, 0x18762fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x3592f000-0x36c8efff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFF140E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFF177E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFF14280 00355B (v02 COREv4 COREBOOT 20110725 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000BFF14240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000BFF14240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFF178E0 0016F6 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x00000000BFF18FE0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x00000000BFF19020 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFF19060 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x00000000BFF190D0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFF1B180 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023d5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x23d5fb000-0x23d5fffff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] |
| [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] |
| [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bff01fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff] |
| [ 0.000000] On node 0 totalpages: 2085025 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 159 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12205 pages used for memmap |
| [ 0.000000] DMA32 zone: 781058 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 20312 pages used for memmap |
| [ 0.000000] Normal zone: 1299968 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff02000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 38 pages/cpu @ffff937ffd200000 s115224 r8192 d32232 u524288 |
| [ 0.000000] pcpu-alloc: s115224 r8192 d32232 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2052285 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/vmlinuz root=/dev/mapper/sda3_crypt rootflags=subvol=@ iomem=relaxed ro quiet |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 8106156K/8340100K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 233944K reserved, 0K cma-reserved) |
| [ 0.000000] ftrace: allocating 28602 entries in 112 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 2494.232 MHz processor |
| [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.46 BogoMIPS (lpj=9976928) |
| [ 0.004000] pid_max: default: 32768 minimum: 301 |
| [ 0.004000] ACPI: Core revision 20170531 |
| [ 0.009464] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.009507] Security Framework initialized |
| [ 0.009508] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.009513] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.010737] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.011373] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.011412] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.011431] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.011617] CPU: Physical Processor ID: 0 |
| [ 0.011617] CPU: Processor Core ID: 0 |
| [ 0.011624] mce: CPU supports 7 MCE banks |
| [ 0.011632] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.011640] process: using mwait in idle threads |
| [ 0.011643] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.011644] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.011749] Freeing SMP alternatives memory: 28K |
| [ 0.012958] smpboot: Max logical packages: 2 |
| [ 0.012967] DMAR: Host address width 36 |
| [ 0.012969] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.012975] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.012976] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.012979] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.012981] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.012982] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.012983] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.013335] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.013336] x2apic enabled |
| [ 0.013342] Switched APIC routing to cluster x2apic. |
| [ 0.013803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.053504] TSC deadline timer enabled |
| [ 0.053507] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) |
| [ 0.053590] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.053611] ... version: 3 |
| [ 0.053612] ... bit width: 48 |
| [ 0.053612] ... generic registers: 4 |
| [ 0.053613] ... value mask: 0000ffffffffffff |
| [ 0.053614] ... max period: 00007fffffffffff |
| [ 0.053614] ... fixed-purpose events: 3 |
| [ 0.053615] ... event mask: 000000070000000f |
| [ 0.053653] Hierarchical SRCU implementation. |
| [ 0.054095] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.054111] smp: Bringing up secondary CPUs ... |
| [ 0.054201] x86: Booting SMP configuration: |
| [ 0.054202] .... node #0, CPUs: #1 #2 #3 |
| [ 0.294021] smp: Brought up 1 node, 4 CPUs |
| [ 0.294021] smpboot: Total of 4 processors activated (19957.83 BogoMIPS) |
| [ 0.296292] devtmpfs: initialized |
| [ 0.296292] x86/mm: Memory block size: 128MB |
| [ 0.296746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.296746] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.296746] pinctrl core: initialized pinctrl subsystem |
| [ 0.296746] NET: Registered protocol family 16 |
| [ 0.296746] cpuidle: using governor ladder |
| [ 0.296746] cpuidle: using governor menu |
| [ 0.296746] PCCT header not found. |
| [ 0.296746] ACPI: bus type PCI registered |
| [ 0.296746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.296746] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| [ 0.296746] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| [ 0.296746] PCI: Using configuration type 1 for base access |
| [ 0.296746] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.296825] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.296825] ACPI: Added _OSI(Module Device) |
| [ 0.296825] ACPI: Added _OSI(Processor Device) |
| [ 0.296825] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.296825] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.296825] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.300993] ACPI: EC: EC started |
| [ 0.300994] ACPI: EC: interrupt blocked |
| [ 0.301041] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.301042] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.301044] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.301044] ACPI: Interpreter enabled |
| [ 0.301061] ACPI: (supports S0 S3 S4 S5) |
| [ 0.301062] ACPI: Using IOAPIC for interrupt routing |
| [ 0.301081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.307528] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.307532] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.307580] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.307589] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.307785] PCI host bridge to bus 0000:00 |
| [ 0.307787] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.307788] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.307790] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.307791] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.307792] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.307793] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.307795] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.307796] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.307797] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.307799] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.307800] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.307801] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.307802] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.307803] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.307805] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.307806] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.307807] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xf7ffffff window] |
| [ 0.307809] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.307810] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.307818] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| [ 0.307904] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| [ 0.307914] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit] |
| [ 0.307919] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.307922] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.307994] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000 |
| [ 0.308004] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) |
| [ 0.308108] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.308126] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff] |
| [ 0.308135] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff] |
| [ 0.308143] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.308201] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.308267] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.308289] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff] |
| [ 0.308370] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.308440] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.308462] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit] |
| [ 0.308535] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.308612] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.308691] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.308767] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| [ 0.308854] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.308929] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| [ 0.309014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.309091] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| [ 0.309227] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.309316] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400 |
| [ 0.309440] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| [ 0.309522] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.309544] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff] |
| [ 0.309626] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.309695] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| [ 0.309861] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| [ 0.309881] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.309889] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.309897] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.309906] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.309914] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.309922] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff] |
| [ 0.309967] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.310030] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.310049] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit] |
| [ 0.310069] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.310188] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.310269] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.310324] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf147ffff 64bit] |
| [ 0.310408] pci 0000:02:00.0: reg 0x30: [mem 0xf1480000-0xf148ffff pref] |
| [ 0.310524] pci 0000:02:00.0: supports D1 D2 |
| [ 0.310525] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.320049] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.320063] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.320172] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.320176] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.320180] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.320186] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.320282] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.320321] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.320374] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff] |
| [ 0.320684] pci 0000:04:00.0: supports D1 D2 |
| [ 0.320685] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.332055] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.332069] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.332164] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| [ 0.332305] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.332354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.332400] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.332446] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.332491] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.332537] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.332581] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.332627] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.333489] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.333556] ACPI: EC: interrupt unblocked |
| [ 0.333562] ACPI: EC: event unblocked |
| [ 0.333568] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.333569] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.333623] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.333623] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.333623] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.333623] vgaarb: loaded |
| [ 0.333623] EDAC MC: Ver: 3.0.0 |
| [ 0.333623] PCI: Using ACPI for IRQ routing |
| [ 0.333623] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.333623] e820: reserve RAM buffer [mem 0xbff02000-0xbfffffff] |
| [ 0.333623] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff] |
| [ 0.333648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.333648] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.337020] clocksource: Switched to clocksource hpet |
| [ 0.344582] VFS: Disk quotas dquot_6.6.0 |
| [ 0.344604] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.344683] pnp: PnP ACPI init |
| [ 0.344774] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.344776] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.344777] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.344779] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.344780] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| [ 0.344782] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.344783] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.344784] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.344786] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.344787] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.344791] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.345316] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.345318] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.345355] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.345357] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.345359] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.345379] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.345410] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.345435] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.345460] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.345478] pnp: PnP ACPI: found 7 devices |
| [ 0.351905] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.351960] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.351973] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.351978] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.351986] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.351989] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.351994] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.351998] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.352013] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.352020] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.352031] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| [ 0.352049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.352051] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.352052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.352053] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.352054] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.352056] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.352057] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.352058] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.352059] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.352060] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.352062] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.352063] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.352064] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.352065] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.352066] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.352068] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.352069] pci_bus 0000:00: resource 20 [mem 0xc2a00001-0xf7ffffff window] |
| [ 0.352070] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.352072] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff] |
| [ 0.352073] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.352074] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff] |
| [ 0.352075] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.352076] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff] |
| [ 0.352146] NET: Registered protocol family 2 |
| [ 0.352296] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.352420] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.352549] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.352583] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.352610] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.352671] NET: Registered protocol family 1 |
| [ 0.352685] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.353119] PCI: CLS 64 bytes, default 64 |
| [ 0.353160] Unpacking initramfs... |
| [ 0.696696] Freeing initrd memory: 19840K |
| [ 0.696779] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.696782] software IO TLB [mem 0xbbf02000-0xbff02000] (64MB) mapped at [ffff937e7bf02000-ffff937e7ff01fff] |
| [ 0.697124] audit: initializing netlink subsys (disabled) |
| [ 0.697183] audit: type=2000 audit(1508692366.697:1): state=initialized audit_enabled=0 res=1 |
| [ 0.697477] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 0.697516] zbud: loaded |
| [ 1.069064] Key type asymmetric registered |
| [ 1.069065] Asymmetric key parser 'x509' registered |
| [ 1.069080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) |
| [ 1.069112] io scheduler noop registered |
| [ 1.069112] io scheduler deadline registered |
| [ 1.069120] io scheduler cfq registered (default) |
| [ 1.069121] io scheduler mq-deadline registered |
| [ 1.070019] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 1.070038] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 1.070058] pcieport 0000:00:1c.3: Signaling PME with IRQ 28 |
| [ 1.070078] pcieport 0000:00:1c.4: Signaling PME with IRQ 29 |
| [ 1.070100] pcieport 0000:00:1c.5: Signaling PME with IRQ 30 |
| [ 1.070121] pciehp 0000:00:1c.3:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.070160] intel_idle: MWAIT substates: 0x21120 |
| [ 1.070161] intel_idle: v0.4.1 model 0x2A |
| [ 1.070307] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.070652] GHES: HEST is not enabled! |
| [ 1.070711] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.071091] Linux agpgart interface v0.103 |
| [ 1.084170] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 1.148482] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.148483] AMD IOMMUv2 functionality not available on this system |
| [ 1.149111] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.154472] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.154477] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.154609] mousedev: PS/2 mouse device common for all mice |
| [ 1.154655] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.154778] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 1.154807] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.154815] intel_pstate: Intel P-state driver initializing |
| [ 1.155442] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.155984] NET: Registered protocol family 10 |
| [ 1.156618] Segment Routing with IPv6 |
| [ 1.156655] mip6: Mobile IPv6 |
| [ 1.156659] NET: Registered protocol family 17 |
| [ 1.156664] mpls_gso: MPLS GSO support |
| [ 1.157309] microcode: sig=0x206a7, pf=0x10, revision=0x29 |
| [ 1.157511] microcode: Microcode Update Driver: v2.2. |
| [ 1.157557] sched_clock: Marking stable (1157487215, 0)->(1154515601, 2971614) |
| [ 1.158299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.158663] registered taskstats version 1 |
| [ 1.158702] zswap: loaded using pool lzo/zbud |
| [ 1.316829] rtc_cmos 00:03: setting system clock to 2017-10-22 17:12:47 UTC (1508692367) |
| [ 1.316941] PM: Hibernation image not present or could not be loaded. |
| [ 1.324093] Freeing unused kernel memory: 1472K |
| [ 1.324095] Write protecting the kernel read-only data: 12288k |
| [ 1.325447] Freeing unused kernel memory: 1592K |
| [ 1.332472] Freeing unused kernel memory: 1132K |
| [ 1.333664] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.439334] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.439336] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.439579] PTP clock support registered |
| [ 1.440645] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.440646] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.440726] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.440857] ACPI: bus type USB registered |
| [ 1.440878] usbcore: registered new interface driver usbfs |
| [ 1.440887] usbcore: registered new interface driver hub |
| [ 1.440907] usbcore: registered new device driver usb |
| [ 1.441283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.441522] ehci-pci: EHCI PCI platform driver |
| [ 1.442256] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.442257] sdhci: Copyright(c) Pierre Ossman |
| [ 1.442480] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.442880] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA |
| [ 1.446125] SCSI subsystem initialized |
| [ 1.447561] libata version 3.00 loaded. |
| [ 1.448179] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 1.448419] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.448420] ACPI: Thermal Zone [THM0] (48 C) |
| [ 1.452374] AVX version of gcm_enc/dec engaged. |
| [ 1.452375] AES CTR mode by8 optimization enabled |
| [ 1.453321] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.453323] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.471052] alg: No test for pcbc(aes) (pcbc-aes-aesni) |
| [ 1.586387] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.711497] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5 |
| [ 1.711499] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.711559] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.711786] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.711799] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.711825] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.712726] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.715739] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.715785] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000 |
| [ 1.728143] tsc: Refined TSC clocksource calibration: 2494.332 MHz |
| [ 1.728158] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns |
| [ 1.728165] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.728277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.728282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.728286] usb usb1: Product: EHCI Host Controller |
| [ 1.728290] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd |
| [ 1.728293] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.728811] hub 1-0:1.0: USB hub found |
| [ 1.728824] hub 1-0:1.0: 3 ports detected |
| [ 1.729329] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.729346] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.729368] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.733283] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.733318] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000 |
| [ 1.748148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.748226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.748228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.748230] usb usb2: Product: EHCI Host Controller |
| [ 1.748232] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd |
| [ 1.748233] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.748605] hub 2-0:1.0: USB hub found |
| [ 1.748614] hub 2-0:1.0: 3 ports detected |
| [ 1.749054] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.749904] ahci 0000:00:1f.2: version 3.0 |
| [ 1.750231] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.760359] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.760364] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.761547] scsi host0: ahci |
| [ 1.761957] scsi host1: ahci |
| [ 1.762209] scsi host2: ahci |
| [ 1.762390] scsi host3: ahci |
| [ 1.762582] scsi host4: ahci |
| [ 1.762785] scsi host5: ahci |
| [ 1.762871] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32 |
| [ 1.762876] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32 |
| [ 1.762879] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32 |
| [ 1.762880] ata4: DUMMY |
| [ 1.762882] ata5: DUMMY |
| [ 1.762883] ata6: DUMMY |
| [ 2.056144] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.075969] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.076105] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.078044] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2.078505] ata1.00: disabling queued TRIM support |
| [ 2.078510] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133 |
| [ 2.078514] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 2.079262] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2.079761] ata1.00: disabling queued TRIM support |
| [ 2.080343] ata1.00: configured for UDMA/133 |
| [ 2.080884] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 |
| [ 2.204839] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 2.204845] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.205508] hub 1-1:1.0: USB hub found |
| [ 2.205654] hub 1-1:1.0: 6 ports detected |
| [ 2.224854] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 2.224860] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.225507] hub 2-1:1.0: USB hub found |
| [ 2.225593] hub 2-1:1.0: 8 ports detected |
| [ 2.420184] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448] |
| [ 2.427758] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.492154] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.512175] usb 2-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.513855] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180 |
| [ 2.513881] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.573311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.602109] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 |
| [ 2.602115] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.602119] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.602122] usb 1-1.3: Manufacturer: UPEK |
| [ 2.622853] usb 2-1.3: string descriptor 0 read error: -22 |
| [ 2.622936] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 2.622940] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.680147] usb 1-1.6: new high-speed USB device number 4 using ehci-pci |
| [ 2.704104] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 2.743753] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.751973] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 2.752016] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.752022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.752173] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.752226] clocksource: Switched to clocksource tsc |
| [ 2.755141] sda: sda1 sda2 sda3 |
| [ 2.755502] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.799454] device-mapper: uevent: version 1.0.3 |
| [ 2.799520] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com |
| [ 2.830655] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d |
| [ 2.830656] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.830657] usb 2-1.4: Product: F5521gw |
| [ 2.830658] usb 2-1.4: Manufacturer: Ericsson |
| [ 2.830659] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0 |
| [ 2.952139] usb 2-1.5: new full-speed USB device number 5 using ehci-pci |
| [ 3.063479] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6 |
| [ 3.063486] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.063489] usb 2-1.5: Product: ISD-V4 |
| [ 3.063493] usb 2-1.5: Manufacturer: Tablet |
| [ 3.068479] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.080272] usbcore: registered new interface driver usbhid |
| [ 3.080274] usbhid: USB HID core driver |
| [ 3.081662] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4 |
| [ 3.081773] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 |
| [ 3.082133] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8 |
| [ 3.082219] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 |
| [ 3.208653] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 |
| [ 3.208659] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.208662] usb 1-1.6: Product: Integrated Camera |
| [ 3.208665] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 3.384350] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.678061] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 7.277895] random: crng init done |
| [ 10.493442] NET: Registered protocol family 38 |
| [ 10.792033] raid6: sse2x1 gen() 7695 MB/s |
| [ 10.860033] raid6: sse2x1 xor() 6496 MB/s |
| [ 10.928031] raid6: sse2x2 gen() 10509 MB/s |
| [ 10.996033] raid6: sse2x2 xor() 7745 MB/s |
| [ 11.064029] raid6: sse2x4 gen() 12359 MB/s |
| [ 11.132032] raid6: sse2x4 xor() 9102 MB/s |
| [ 11.132033] raid6: using algorithm sse2x4 gen() 12359 MB/s |
| [ 11.132034] raid6: .... xor() 9102 MB/s, rmw enabled |
| [ 11.132035] raid6: using ssse3x2 recovery algorithm |
| [ 11.132315] xor: automatically using best checksumming function avx |
| [ 11.136963] Btrfs loaded, crc32c=crc32c-intel |
| [ 11.150455] BTRFS: device label root devid 1 transid 91688 /dev/mapper/sda3_crypt |
| [ 11.179044] BTRFS info (device dm-0): disk space caching is enabled |
| [ 11.179049] BTRFS info (device dm-0): has skinny extents |
| [ 11.259218] BTRFS info (device dm-0): detected SSD devices, enabling SSD mode |
| [ 11.668194] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 11.677139] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| [ 11.677278] systemd[1]: Detected architecture x86-64. |
| [ 11.677986] systemd[1]: Set hostname to <debianLaptop>. |
| [ 11.748720] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 11.748779] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 11.748790] systemd[1]: Reached target Swap. |
| [ 11.748826] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 11.748835] systemd[1]: Reached target Remote File Systems. |
| [ 11.748975] systemd[1]: Created slice User and Session Slice. |
| [ 11.748988] systemd[1]: Reached target User and Group Name Lookups. |
| [ 11.775106] BTRFS info (device dm-0): turning on discard |
| [ 11.775110] BTRFS info (device dm-0): use lzo compression |
| [ 11.775111] BTRFS info (device dm-0): disk space caching is enabled |
| [ 11.783539] lp: driver loaded but no devices found |
| [ 11.784871] ppdev: user-space parallel port driver |
| [ 11.803828] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) |
| [ 11.816304] systemd-journald[328]: Received request to flush runtime journal from PID 1 |
| [ 11.827431] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 11.939533] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input10 |
| [ 11.939554] ACPI: Sleep Button [SLPB] |
| [ 11.940660] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input11 |
| [ 11.940790] ACPI: Lid Switch [LID] |
| [ 11.940852] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12 |
| [ 11.940863] ACPI: Power Button [PWRF] |
| [ 11.943652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 12.021367] ACPI: Battery Slot [BAT0] (battery present) |
| [ 12.021629] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 12.023374] ACPI: AC Adapter [AC] (on-line) |
| [ 12.025104] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247) |
| [ 12.025110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 12.025117] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247) |
| [ 12.025121] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 12.025122] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247) |
| [ 12.025127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 12.025128] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247) |
| [ 12.025132] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 12.025133] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 12.026186] [drm] Memory usable by graphics device = 2048M |
| [ 12.026188] [drm] Replacing VGA console driver |
| [ 12.026426] media: Linux media interface: v0.10 |
| [ 12.026777] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 12.027125] Console: switching to colour dummy device 80x25 |
| [ 12.028917] Non-volatile memory driver v1.3 |
| [ 12.033341] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 12.033342] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 12.033343] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1891-gbb98b38b93, EC 8DHT34WW-3.20 |
| [ 12.033344] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO |
| [ 12.033778] Linux video capture interface: v2.00 |
| [ 12.035744] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 12.035964] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 12.036055] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 12.036056] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 12.043948] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 12.044659] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 12.046577] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13 |
| [ 12.085435] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 12.085436] [drm] Driver supports precise vblank timestamp query. |
| [ 12.085787] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 12.096367] input: PC Speaker as /devices/platform/pcspkr/input/input14 |
| [ 12.097091] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device |
| [ 12.097651] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device |
| [ 12.098588] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device |
| [ 12.098629] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device |
| [ 12.098647] usbcore: registered new interface driver cdc_wdm |
| [ 12.100546] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device |
| [ 12.100574] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) |
| [ 12.102766] usbcore: registered new interface driver cdc_acm |
| [ 12.102767] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 12.106989] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 12.106992] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 12.106994] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 12.107074] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15 |
| [ 12.107131] usbcore: registered new interface driver uvcvideo |
| [ 12.107132] USB Video Class driver (1.1.1) |
| [ 12.114285] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 12.114287] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 12.114288] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 12.114289] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 12.127896] Bluetooth: Core ver 2.22 |
| [ 12.127908] NET: Registered protocol family 31 |
| [ 12.127909] Bluetooth: HCI device and connection manager initialized |
| [ 12.127912] Bluetooth: HCI socket layer initialized |
| [ 12.127914] Bluetooth: L2CAP socket layer initialized |
| [ 12.127924] Bluetooth: SCO socket layer initialized |
| [ 12.144356] ath: phy0: ASPM enabled: 0x43 |
| [ 12.144358] ath: EEPROM regdomain: 0x6a |
| [ 12.144359] ath: EEPROM indicates we should expect a direct regpair map |
| [ 12.144361] ath: Country alpha2 being used: 00 |
| [ 12.144361] ath: Regpair used: 0x6a |
| [ 12.166363] usbcore: registered new interface driver btusb |
| [ 12.168159] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00 |
| [ 12.168642] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00 |
| [ 12.168669] usbcore: registered new interface driver cdc_ncm |
| [ 12.171143] usbcore: registered new interface driver cdc_mbim |
| [ 12.172384] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 12.172745] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffa46c41b00000, irq=17 |
| [ 12.187441] intel_rapl: Found RAPL domain package |
| [ 12.187442] intel_rapl: Found RAPL domain core |
| [ 12.187443] intel_rapl: Found RAPL domain uncore |
| [ 12.188522] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 |
| [ 12.188576] iTCO_vendor_support: vendor-support=0 |
| [ 12.188699] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 12.193155] acpi device:03: registered as cooling_device5 |
| [ 12.193222] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 |
| [ 12.198455] usb 2-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu |
| [ 12.232805] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 12.232857] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 12.233267] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 12.238039] usb 2-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu |
| [ 12.241694] usbcore: registered new interface driver ath3k |
| [ 12.246854] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0 |
| [ 12.293666] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 12.400198] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 12.411798] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. |
| [ 12.412267] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| [ 12.412269] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 12.412270] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 12.412272] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 12.412273] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 12.412275] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 12.412277] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b |
| [ 12.412278] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 12.413587] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| [ 12.421756] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 12.422060] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 12.422122] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 12.422181] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| [ 12.422239] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 12.422298] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 12.422357] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 12.422416] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 12.487011] usb 2-1.3: USB disconnect, device number 3 |
| [ 12.604577] fbcon: inteldrmfb (fb0) is primary device |
| [ 12.708156] usb 2-1.3: new full-speed USB device number 6 using ehci-pci |
| [ 12.787557] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 12.817896] usb 2-1.3: string descriptor 0 read error: -22 |
| [ 12.817900] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 12.817902] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 13.046171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 13.046172] Bluetooth: BNEP filters: protocol multicast |
| [ 13.046175] Bluetooth: BNEP socket layer initialized |
| [ 13.331103] Console: switching to colour frame buffer device 170x48 |
| [ 13.351206] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 13.567938] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 13.618172] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device |
| [ 13.828235] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 13.833174] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.845067] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.860147] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 13.952643] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 14.026206] cdc_acm 2-1.4:2.1: ttyACM0: USB ACM device |
| [ 14.027370] cdc_acm 2-1.4:2.3: ttyACM1: USB ACM device |
| [ 14.030488] cdc_wdm 2-1.4:2.5: cdc-wdm0: USB WDM device |
| [ 14.061239] cdc_ncm 2-1.4:2.6: MAC-Address: 02:80:37:ec:02:00 |
| [ 14.061800] cdc_ncm 2-1.4:2.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00 |
| [ 14.062596] cdc_wdm 2-1.4:2.8: cdc-wdm1: USB WDM device |
| [ 14.063690] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: renamed from wwan0 |
| [ 15.368717] Bluetooth: RFCOMM TTY layer initialized |
| [ 15.368724] Bluetooth: RFCOMM socket layer initialized |
| [ 15.368730] Bluetooth: RFCOMM ver 1.11 |
| [ 15.546752] cdc_wdm 2-1.4:2.8: wdm_int_callback - 0 bytes |
| [ 15.565755] cdc_wdm 2-1.4:2.5: wdm_int_callback - 0 bytes |
| [ 17.630845] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 17.688919] wlp2s0: authenticate with 3e:45:eb:7c:d2:57 |
| [ 17.699533] wlp2s0: send auth to 3e:45:eb:7c:d2:57 (try 1/3) |
| [ 17.703971] wlp2s0: authenticated |
| [ 17.708048] wlp2s0: associate with 3e:45:eb:7c:d2:57 (try 1/3) |
| [ 17.712607] wlp2s0: RX AssocResp from 3e:45:eb:7c:d2:57 (capab=0x431 status=0 aid=4) |
| [ 17.712753] wlp2s0: associated |
| [ 17.712814] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 17.716865] ath: EEPROM regdomain: 0x817c |
| [ 17.716869] ath: EEPROM indicates we should expect a country code |
| [ 17.716871] ath: doing EEPROM country->regdmn map search |
| [ 17.716871] ath: country maps to regdmn code: 0x37 |
| [ 17.716872] ath: Country alpha2 being used: IT |
| [ 17.716872] ath: Regpair used: 0x37 |
| [ 17.716875] ath: regdomain 0x817c dynamically updated by country IE |
| [ 21.574139] fuse init (API version 7.26) |
| [ 23.226700] rfkill: input handler disabled |
| [ 190.544384] wlp2s0: deauthenticating from 3e:45:eb:7c:d2:57 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 192.178248] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 192.243270] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 195.920543] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 195.980069] wlp2s0: authenticate with 3e:45:eb:7c:d2:57 |
| [ 195.990809] wlp2s0: send auth to 3e:45:eb:7c:d2:57 (try 1/3) |
| [ 195.994742] wlp2s0: authenticated |
| [ 195.998297] wlp2s0: associate with 3e:45:eb:7c:d2:57 (try 1/3) |
| [ 196.003016] wlp2s0: RX AssocResp from 3e:45:eb:7c:d2:57 (capab=0x431 status=0 aid=4) |
| [ 196.003178] wlp2s0: associated |
| [ 196.003250] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 196.011219] ath: EEPROM regdomain: 0x817c |
| [ 196.011222] ath: EEPROM indicates we should expect a country code |
| [ 196.011224] ath: doing EEPROM country->regdmn map search |
| [ 196.011225] ath: country maps to regdmn code: 0x37 |
| [ 196.011227] ath: Country alpha2 being used: IT |
| [ 196.011228] ath: Regpair used: 0x37 |
| [ 196.011230] ath: regdomain 0x817c dynamically updated by country IE |
| [ 626.557627] wlp2s0: deauthenticating from 3e:45:eb:7c:d2:57 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 628.065773] IPv6: ADDRCONF(NETDEV_UP): wwp0s29u1u4c2i6: link is not ready |
| [ 628.066900] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: network connection: disconnected |
| [ 628.074902] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: network connection: disconnected |
| [ 628.090902] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: 21 mbit/s downlink 5 mbit/s uplink |
| [ 628.098903] cdc_ncm 2-1.4:2.6 wwp0s29u1u4c2i6: network connection: connected |