| [ 0.000000] Linux version 4.16.13-gentoo (root@localhost) (gcc version 6.3.0 (Gentoo 6.3.0 p1.0)) #3 SMP Sun Jun 3 23:43:51 MSK 2018 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.13-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes net.ifnames=0 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff3afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff3b000-0x000000007fffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000067d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 2463A49/2463A49, BIOS CBET4000 4.8-941-g2bb3cdfb9f 07/29/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x67d600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0x7ff3b max_arch_pfn = 0x400000000 |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| [ 0.000000] BRK [0x02bff000, 0x02bfffff] PGTABLE |
| [ 0.000000] BRK [0x02c00000, 0x02c00fff] PGTABLE |
| [ 0.000000] BRK [0x02c01000, 0x02c01fff] PGTABLE |
| [ 0.000000] BRK [0x02c02000, 0x02c02fff] PGTABLE |
| [ 0.000000] BRK [0x02c03000, 0x02c03fff] PGTABLE |
| [ 0.000000] BRK [0x02c04000, 0x02c04fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x37ad3000-0x37d60fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FF3D0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF40980 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF3D280 0036F6 (v02 COREv4 COREBOOT 20110725 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FF3D240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF3D240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF40A80 002FC5 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF43A50 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF43A90 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF43AD0 00008C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF43B60 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF43C10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000067d5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x67d5e7000-0x67d5eafff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000067d5fffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff3afff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000067d5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000067d5fffff] |
| [ 0.000000] On node 0 totalpages: 6280410 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8125 pages used for memmap |
| [ 0.000000] DMA32 zone: 519995 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 89944 pages used for memmap |
| [ 0.000000] Normal zone: 5756416 pages, LIFO batch:31 |
| [ 0.000000] Reserved but unavailable: 97 pages |
| [ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7ff3b000-0x7fffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x8b/0x43a with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 43 pages/cpu @ (ptrval) s138072 r8192 d29864 u262144 |
| [ 0.000000] pcpu-alloc: s138072 r8192 d29864 u262144 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6182255 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.13-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes net.ifnames=0 |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 24629540K/25121640K available (14364K kernel code, 1518K rwdata, 3648K rodata, 1280K init, 692K bss, 492100K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] ACPI: Core revision 20180105 |
| [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.005000] tsc: Fast TSC calibration using PIT |
| [ 0.006000] tsc: Detected 2693.799 MHz processor |
| [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d45c7a9a6, max_idle_ns: 440795299559 ns |
| [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.59 BogoMIPS (lpj=2693799) |
| [ 0.006000] pid_max: default: 32768 minimum: 301 |
| [ 0.006000] Security Framework initialized |
| [ 0.006000] SELinux: Initializing. |
| [ 0.006000] SELinux: Starting in permissive mode |
| [ 0.011038] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) |
| [ 0.013476] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.013660] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.013807] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.014064] CPU: Physical Processor ID: 0 |
| [ 0.014135] CPU: Processor Core ID: 0 |
| [ 0.014212] mce: CPU supports 9 MCE banks |
| [ 0.014296] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.014378] process: using mwait in idle threads |
| [ 0.014451] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.014523] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.014598] Spectre V2 : Vulnerable: Minimal generic ASM retpoline |
| [ 0.014671] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.014769] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.014843] Speculative Store Bypass: Vulnerable |
| [ 0.015023] Freeing SMP alternatives memory: 44K |
| [ 0.015497] TSC deadline timer enabled |
| [ 0.015500] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.015682] mce: [Hardware Error]: Machine check events logged |
| [ 0.015778] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a |
| [ 0.015921] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 |
| [ 0.016000] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 6121419021 SOCKET 0 APIC 0 microcode 1f |
| [ 0.016000] mce: [Hardware Error]: Machine check events logged |
| [ 0.016000] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a |
| [ 0.016000] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 |
| [ 0.016000] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 6121419021 SOCKET 0 APIC 0 microcode 1f |
| [ 0.016174] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.016338] ... version: 3 |
| [ 0.016430] ... bit width: 48 |
| [ 0.016523] ... generic registers: 4 |
| [ 0.016615] ... value mask: 0000ffffffffffff |
| [ 0.016708] ... max period: 00007fffffffffff |
| [ 0.016803] ... fixed-purpose events: 3 |
| [ 0.016894] ... event mask: 000000070000000f |
| [ 0.017018] Hierarchical SRCU implementation. |
| [ 0.017215] smp: Bringing up secondary CPUs ... |
| [ 0.017360] x86: Booting SMP configuration: |
| [ 0.017453] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 |
| [ 0.024019] smp: Brought up 1 node, 8 CPUs |
| [ 0.024195] smpboot: Max logical packages: 1 |
| [ 0.024287] smpboot: Total of 8 processors activated (43100.78 BogoMIPS) |
| [ 0.025529] devtmpfs: initialized |
| [ 0.026091] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.026079] kworker/u16:0 (51) used greatest stack depth: 14696 bytes left |
| [ 0.026246] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.026504] RTC time: 90:10:21, date: 116/127/54 |
| [ 0.026664] NET: Registered protocol family 16 |
| [ 0.026900] audit: initializing netlink subsys (disabled) |
| [ 0.027007] audit: type=2000 audit(6121419021.027:1): state=initialized audit_enabled=0 res=1 |
| [ 0.027027] kworker/u16:0 (54) used greatest stack depth: 14232 bytes left |
| [ 0.028002] cpuidle: using governor ladder |
| [ 0.028101] cpuidle: using governor menu |
| [ 0.028208] ACPI: bus type PCI registered |
| [ 0.028344] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.029004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.029108] PCI: Using configuration type 1 for base access |
| [ 0.029305] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.032864] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.033006] cryptd: max_cpu_qlen set to 1000 |
| [ 0.033133] ACPI: Added _OSI(Module Device) |
| [ 0.033160] ACPI: Added _OSI(Processor Device) |
| [ 0.033251] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.033344] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.033438] ACPI: Deleted _OSI(Windows 2012) |
| [ 0.033438] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.035127] ACPI Error: No handler for Region [ERAM] ( (ptrval)) [EmbeddedControl] (20180105/evregion-166) |
| [ 0.035275] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180105/exfldio-299) |
| [ 0.035419] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC.HKEY._INI, AE_NOT_EXIST (20180105/psparse-550) |
| [ 0.035785] ACPI: EC: EC started |
| [ 0.035877] ACPI: EC: interrupt blocked |
| [ 0.036017] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.036111] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.036254] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.036396] ACPI: Interpreter enabled |
| [ 0.036502] ACPI: (supports S0 S3 S4 S5) |
| [ 0.036595] ACPI: Using IOAPIC for interrupt routing |
| [ 0.036708] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.036949] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.041011] ACPI: Power Resource [FPWR] (off) |
| [ 0.041011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.041011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.041037] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.041187] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.041393] PCI host bridge to bus 0000:00 |
| [ 0.041487] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.041584] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.041681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.041823] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.041966] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.043002] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.043145] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.043287] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.043429] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.043572] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.043714] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.043857] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.043999] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.044001] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.044144] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.044285] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.044428] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.044570] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.044713] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.044815] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.044892] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.044903] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.044908] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.044912] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.045007] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.045007] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.045062] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.045086] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.045151] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.045236] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.045329] pci 0000:00:16.0: reg 0x10: [mem 0xe1641000-0xe164100f 64bit] |
| [ 0.045651] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.045737] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.045755] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.045763] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.045770] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.045827] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.045879] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.045900] pci 0000:00:1a.0: reg 0x10: [mem 0xe163e000-0xe163e3ff] |
| [ 0.045980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.046038] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.046060] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.046129] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.046190] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.046274] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.046335] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.046419] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.046478] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.046563] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.046628] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.046649] pci 0000:00:1d.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.046729] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.046787] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.046939] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.046958] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.046965] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.046973] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.046981] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.046989] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.046997] pci 0000:00:1f.2: reg 0x24: [mem 0xe163d000-0xe163d7ff] |
| [ 0.047040] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.047091] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.047110] pci 0000:00:1f.3: reg 0x10: [mem 0xe1640000-0xe16400ff 64bit] |
| [ 0.047129] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.047266] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.047305] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.047422] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function) |
| [ 0.047565] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller |
| [ 0.047756] pci 0000:01:00.0: reg 0x10: [mem 0xe1401000-0xe14010ff] |
| [ 0.048065] pci 0000:01:00.0: supports D1 D2 |
| [ 0.048065] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.048174] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000 |
| [ 0.048235] pci 0000:01:00.1: reg 0x10: [mem 0xe1402000-0xe14020ff] |
| [ 0.048524] pci 0000:01:00.1: supports D1 D2 |
| [ 0.048525] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.048630] pci 0000:01:00.3: [1180:e832] type 00 class 0x0c0010 |
| [ 0.048690] pci 0000:01:00.3: reg 0x10: [mem 0xe1400000-0xe14007ff] |
| [ 0.048859] pci 0000:01:00.3: Enabling fixed DMA alias to 00.0 |
| [ 0.049074] pci 0000:01:00.3: supports D1 D2 |
| [ 0.049074] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.052079] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.052178] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.052253] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.052308] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe157ffff 64bit] |
| [ 0.052391] pci 0000:02:00.0: reg 0x30: [mem 0xe1580000-0xe158ffff pref] |
| [ 0.052509] pci 0000:02:00.0: supports D1 D2 |
| [ 0.052510] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.055037] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.055151] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.055196] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.055293] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.055296] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.055302] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.055436] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.055572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.055704] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.055837] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.055968] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.056035] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.056166] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.056297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.057009] ACPI: EC: interrupt unblocked |
| [ 0.057009] ACPI: EC: event unblocked |
| [ 0.057104] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.057246] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.057425] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.057425] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.057425] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.057425] vgaarb: loaded |
| [ 0.058010] SCSI subsystem initialized |
| [ 0.058018] libata version 3.00 loaded. |
| [ 0.058051] ACPI: bus type USB registered |
| [ 0.058160] usbcore: registered new interface driver usbfs |
| [ 0.058260] usbcore: registered new interface driver hub |
| [ 0.058371] usbcore: registered new device driver usb |
| [ 0.058478] Linux video capture interface: v2.00 |
| [ 0.058581] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.058675] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.059000] PTP clock support registered |
| [ 0.059015] EDAC MC: Ver: 3.0.0 |
| [ 0.059095] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.059163] PCI: Using ACPI for IRQ routing |
| [ 0.060386] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.060471] e820: reserve RAM buffer [mem 0x7ff3b000-0x7fffffff] |
| [ 0.060472] e820: reserve RAM buffer [mem 0x67d600000-0x67fffffff] |
| [ 0.061007] Bluetooth: Core ver 2.22 |
| [ 0.061007] NET: Registered protocol family 31 |
| [ 0.061007] Bluetooth: HCI device and connection manager initialized |
| [ 0.061007] Bluetooth: HCI socket layer initialized |
| [ 0.061007] Bluetooth: L2CAP socket layer initialized |
| [ 0.061007] Bluetooth: SCO socket layer initialized |
| [ 0.061104] NetLabel: Initializing |
| [ 0.061194] NetLabel: domain hash size = 128 |
| [ 0.061287] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.061395] NetLabel: unlabeled traffic allowed by default |
| [ 0.062128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.062228] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.064018] clocksource: Switched to clocksource tsc-early |
| [ 0.072394] VFS: Disk quotas dquot_6.6.0 |
| [ 0.072501] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.073754] pnp: PnP ACPI init |
| [ 0.073962] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.074063] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.074160] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.074257] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.074353] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.074448] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.074545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.074642] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.074739] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.074836] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.074937] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.075331] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.075431] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.075460] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.075556] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.075654] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.075669] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.075692] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.075712] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.075730] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.075748] pnp: PnP ACPI: found 7 devices |
| [ 0.080390] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.080565] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.080664] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.080767] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.080863] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.080967] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.081064] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.081164] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.081263] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.081410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.081411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.081412] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.081413] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.081414] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.081415] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.081416] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.081417] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.081418] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.081419] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.081420] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.081421] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.081422] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.081422] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.081423] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.081424] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.081425] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] |
| [ 0.081426] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.081427] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.081428] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.081429] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.081430] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.081431] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.081491] NET: Registered protocol family 2 |
| [ 0.081719] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) |
| [ 0.081935] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.082405] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.082614] TCP: Hash tables configured (established 262144 bind 65536) |
| [ 0.082749] UDP hash table entries: 16384 (order: 7, 524288 bytes) |
| [ 0.082916] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) |
| [ 0.083122] NET: Registered protocol family 1 |
| [ 0.083277] RPC: Registered named UNIX socket transport module. |
| [ 0.083372] RPC: Registered udp transport module. |
| [ 0.083464] RPC: Registered tcp transport module. |
| [ 0.083556] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.083723] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.084255] PCI: CLS 64 bytes, default 64 |
| [ 0.084288] Unpacking initramfs... |
| [ 0.322638] Freeing initrd memory: 2616K |
| [ 0.322750] DMAR: Host address width 36 |
| [ 0.324119] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.324226] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.324369] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.324465] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.324619] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.324716] software IO TLB [mem 0x7bf3b000-0x7ff3b000] (64MB) mapped at [ (ptrval)- (ptrval)] |
| [ 0.325022] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 0.325166] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 0.325261] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 0.325354] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 0.326230] Scanning for low memory corruption every 60 seconds |
| [ 0.327243] Initialise system trusted keyrings |
| [ 0.327359] workingset: timestamp_bits=40 max_order=23 bucket_order=0 |
| [ 0.329403] NFS: Registering the id_resolver key type |
| [ 0.329502] Key type id_resolver registered |
| [ 0.329594] Key type id_legacy registered |
| [ 0.329688] nfs4filelayout_init: NFSv4 File Layout Driver Registering... |
| [ 0.329786] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 0.330101] SELinux: Registering netfilter hooks |
| [ 0.330876] NET: Registered protocol family 38 |
| [ 0.330986] Key type asymmetric registered |
| [ 0.331083] Asymmetric key parser 'x509' registered |
| [ 0.331202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.331345] io scheduler noop registered |
| [ 0.331437] io scheduler deadline registered |
| [ 0.331559] io scheduler cfq registered (default) |
| [ 0.331653] io scheduler mq-deadline registered |
| [ 0.331746] io scheduler kyber registered |
| [ 0.332396] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| [ 0.332516] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| [ 0.332633] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 |
| [ 0.340110] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.340568] Non-volatile memory driver v1.3 |
| [ 0.340678] Linux agpgart interface v0.103 |
| [ 0.341041] ACPI: AC Adapter [AC] (off-line) |
| [ 0.341185] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0E:00/input/input0 |
| [ 0.341346] ACPI: Sleep Button [SLPB] |
| [ 0.341464] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0D:00/input/input1 |
| [ 0.341615] ACPI: Lid Switch [LID] |
| [ 0.341733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 0.341879] ACPI: Power Button [PWRF] |
| [ 0.342561] Monitor-Mwait will be used to enter C-1 state |
| [ 0.342564] Monitor-Mwait will be used to enter C-2 state |
| [ 0.342566] Monitor-Mwait will be used to enter C-3 state |
| [ 0.344969] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.345068] ACPI: Thermal Zone [THM0] (43 C) |
| [ 0.345881] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.345976] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.346502] [drm] Replacing VGA console driver |
| [ 0.348042] Console: switching to colour dummy device 80x25 |
| [ 0.353625] ACPI: Battery Slot [BAT0] (battery present) |
| [ 0.353740] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 0.401160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.401166] [drm] Driver supports precise vblank timestamp query. |
| [ 0.401425] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 0.425265] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0 |
| [ 0.425402] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 0.426274] acpi device:0b: registered as cooling_device9 |
| [ 0.426315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 |
| [ 0.428030] loop: module loaded |
| [ 0.428102] ahci 0000:00:1f.2: version 3.0 |
| [ 0.428218] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.439073] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.439079] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.439674] scsi host0: ahci |
| [ 0.439791] scsi host1: ahci |
| [ 0.439879] scsi host2: ahci |
| [ 0.439952] scsi host3: ahci |
| [ 0.440022] scsi host4: ahci |
| [ 0.440080] scsi host5: ahci |
| [ 0.440127] ata1: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d100 irq 28 |
| [ 0.440134] ata2: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d180 irq 28 |
| [ 0.440137] ata3: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d200 irq 28 |
| [ 0.440141] ata4: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d280 irq 28 |
| [ 0.440145] ata5: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d300 irq 28 |
| [ 0.440148] ata6: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d380 irq 28 |
| [ 0.440227] SSFDC read-only Flash Translation layer |
| [ 0.440238] MACsec IEEE 802.1AE |
| [ 0.440265] tun: Universal TUN/TAP device driver, 1.6 |
| [ 0.440310] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI |
| [ 0.440312] e1000: Copyright (c) 1999-2006 Intel Corporation. |
| [ 0.440323] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.440325] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.440380] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.521199] fbcon: inteldrmfb (fb0) is primary device |
| [ 0.545965] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 0.640527] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:9b:28:1a |
| [ 0.640528] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 0.640564] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 0.640581] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k |
| [ 0.640581] igb: Copyright (c) 2007-2014 Intel Corporation. |
| [ 0.640691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.640692] ehci-pci: EHCI PCI platform driver |
| [ 0.640777] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.640866] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.640878] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 0.644772] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 0.644782] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163e000 |
| [ 0.651030] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 0.651081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.651082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.651083] usb usb1: Product: EHCI Host Controller |
| [ 0.651084] usb usb1: Manufacturer: Linux 4.16.13-gentoo ehci_hcd |
| [ 0.651085] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 0.651232] hub 1-0:1.0: USB hub found |
| [ 0.651239] hub 1-0:1.0: 3 ports detected |
| [ 0.651385] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 0.651472] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 0.651483] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 0.655393] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 0.655401] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe163f000 |
| [ 0.662030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 0.662078] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.662079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.662080] usb usb2: Product: EHCI Host Controller |
| [ 0.662081] usb usb2: Manufacturer: Linux 4.16.13-gentoo ehci_hcd |
| [ 0.662081] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 0.662250] hub 2-0:1.0: USB hub found |
| [ 0.662255] hub 2-0:1.0: 3 ports detected |
| [ 0.662340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 0.662344] ohci-pci: OHCI PCI platform driver |
| [ 0.662351] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 0.662442] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.662526] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 0.663589] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 0.663593] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 0.663698] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.663699] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.663700] usb usb3: Product: xHCI Host Controller |
| [ 0.663701] usb usb3: Manufacturer: Linux 4.16.13-gentoo xhci-hcd |
| [ 0.663702] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 0.663831] hub 3-0:1.0: USB hub found |
| [ 0.663841] hub 3-0:1.0: 4 ports detected |
| [ 0.663925] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.663983] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 0.663985] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 0.664063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 0.664064] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.664065] usb usb4: Product: xHCI Host Controller |
| [ 0.664066] usb usb4: Manufacturer: Linux 4.16.13-gentoo xhci-hcd |
| [ 0.664067] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 0.664203] hub 4-0:1.0: USB hub found |
| [ 0.664217] hub 4-0:1.0: 4 ports detected |
| [ 0.664416] usbcore: registered new interface driver usblp |
| [ 0.664439] usbcore: registered new interface driver usb-storage |
| [ 0.664461] usbcore: registered new interface driver usbserial_generic |
| [ 0.664469] usbserial: USB Serial support registered for generic |
| [ 0.664478] usbcore: registered new interface driver usb_debug |
| [ 0.664488] usbserial: USB Serial support registered for debug |
| [ 0.664495] usbserial: USB Serial support registered for xhci_dbc |
| [ 0.664504] usbcore: registered new interface driver pl2303 |
| [ 0.664512] usbserial: USB Serial support registered for pl2303 |
| [ 0.664525] usbcore: registered new interface driver usb_serial_simple |
| [ 0.664530] usbserial: USB Serial support registered for carelink |
| [ 0.664534] usbserial: USB Serial support registered for zio |
| [ 0.664539] usbserial: USB Serial support registered for funsoft |
| [ 0.664545] usbserial: USB Serial support registered for flashloader |
| [ 0.664550] usbserial: USB Serial support registered for google |
| [ 0.664557] usbserial: USB Serial support registered for libtransistor |
| [ 0.664564] usbserial: USB Serial support registered for vivopay |
| [ 0.664570] usbserial: USB Serial support registered for moto_modem |
| [ 0.664577] usbserial: USB Serial support registered for motorola_tetra |
| [ 0.664583] usbserial: USB Serial support registered for novatel_gps |
| [ 0.664588] usbserial: USB Serial support registered for hp4x |
| [ 0.664594] usbserial: USB Serial support registered for suunto |
| [ 0.664600] usbserial: USB Serial support registered for siemens_mpi |
| [ 0.664637] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.666445] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.666447] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.666519] mousedev: PS/2 mouse device common for all mice |
| [ 0.666715] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.666787] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.666814] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.666938] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 0.667471] usbcore: registered new interface driver uvcvideo |
| [ 0.667472] USB Video Class driver (1.1.1) |
| [ 0.667562] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com |
| [ 0.667620] device-mapper: multipath round-robin: version 1.2.0 loaded |
| [ 0.667621] device-mapper: multipath queue-length: version 0.2.0 loaded |
| [ 0.667622] device-mapper: multipath service-time: version 0.3.0 loaded |
| [ 0.667637] intel_pstate: Intel P-state driver initializing |
| [ 0.667759] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.667759] sdhci: Copyright(c) Pierre Ossman |
| [ 0.667783] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 5) |
| [ 0.668195] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 0.668250] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| [ 0.668512] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 0.668655] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.669034] usbcore: registered new interface driver usbhid |
| [ 0.669035] usbhid: USB HID core driver |
| [ 0.669273] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 0.669274] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 0.669276] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-941-g2bb3cdfb9f, EC G4HT39WW-3.22 |
| [ 0.669277] thinkpad_acpi: Lenovo ThinkPad W530, model 2463A49 |
| [ 0.669707] thinkpad_acpi: radio switch found; radios are enabled |
| [ 0.669804] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 0.669822] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 0.669822] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 0.671618] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 0.672312] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 0.672387] random: fast init done |
| [ 0.673947] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled |
| [ 0.675189] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 0.675331] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 0.676887] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 |
| [ 0.678088] u32 classifier |
| [ 0.678089] Actions configured |
| [ 0.678637] Initializing XFRM netlink socket |
| [ 0.678840] NET: Registered protocol family 10 |
| [ 0.679309] Segment Routing with IPv6 |
| [ 0.679482] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver |
| [ 0.679720] NET: Registered protocol family 17 |
| [ 0.679726] NET: Registered protocol family 15 |
| [ 0.679741] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 0.679895] Bluetooth: RFCOMM socket layer initialized |
| [ 0.679898] Bluetooth: RFCOMM ver 1.11 |
| [ 0.679899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 |
| [ 0.679900] Bluetooth: HIDP socket layer initialized |
| [ 0.679932] l2tp_core: L2TP core driver, V2.0 |
| [ 0.679933] l2tp_ip: L2TP IP encapsulation support (L2TPv3) |
| [ 0.679940] l2tp_netlink: L2TP netlink interface |
| [ 0.679954] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) |
| [ 0.679955] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) |
| [ 0.680015] Key type dns_resolver registered |
| [ 0.680672] microcode: sig=0x306a9, pf=0x10, revision=0x1f |
| [ 0.680741] microcode: Microcode Update Driver: v2.2. |
| [ 0.680753] AVX version of gcm_enc/dec engaged. |
| [ 0.680754] AES CTR mode by8 optimization enabled |
| [ 0.691203] sched_clock: Marking stable (691179690, 0)->(702591267, -11411577) |
| [ 0.691687] registered taskstats version 1 |
| [ 0.691688] Loading compiled-in X.509 certificates |
| [ 0.692180] Magic number: 2:425:351 |
| [ 0.750097] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 0.751033] ata1.00: ATA-9: WDC WD10JPVX-00JC3T0, 01.01A01, max UDMA/133 |
| [ 0.751036] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 0.752097] ata1.00: configured for UDMA/133 |
| [ 0.970084] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 0.986082] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.098376] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.098380] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.098760] hub 1-1:1.0: USB hub found |
| [ 1.098836] hub 1-1:1.0: 6 ports detected |
| [ 1.114371] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.114374] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.114674] hub 2-1:1.0: USB hub found |
| [ 1.114715] hub 2-1:1.0: 8 ports detected |
| [ 1.294729] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff820b0d80) |
| [ 1.306385] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 1.306387] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.306390] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) |
| [ 1.306391] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 |
| [ 1.306393] snd_hda_codec_generic hdaudioC0D0: inputs: |
| [ 1.306396] snd_hda_codec_generic hdaudioC0D0: Mic=0x18 |
| [ 1.306398] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12 |
| [ 1.311332] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins |
| [ 1.311333] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line |
| [ 1.311334] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.311335] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.311335] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 |
| [ 1.311336] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6 |
| [ 1.311336] snd_hda_codec_generic hdaudioC0D3: inputs: |
| [ 1.312950] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| [ 1.312995] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 1.313041] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 1.313087] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 1.315645] Console: switching to colour frame buffer device 240x67 |
| [ 1.375290] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 1.376009] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 1.376048] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 1.453717] console [netcon0] enabled |
| [ 1.453872] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-00J 1A01 PQ: 0 ANSI: 5 |
| [ 1.453887] tsc: Refined TSC clocksource calibration: 2693.881 MHz |
| [ 1.453891] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4aa266ff, max_idle_ns: 440795313891 ns |
| [ 1.454818] netconsole: network logging started |
| [ 1.459845] clocksource: Switched to clocksource tsc |
| [ 1.459869] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 1.459998] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.460014] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 1.460015] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| [ 1.460024] sd 0:0:0:0: [sda] Write Protect is off |
| [ 1.460024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.460034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.470886] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 1.471855] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 |
| [ 1.471857] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 1.472812] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.473770] platform regulatory.0: Falling back to user helper |
| [ 1.474012] ALSA device list: |
| [ 1.474013] #0: HDA Intel PCH at 0xe1638000 irq 31 |
| [ 1.474013] #5: ThinkPad Console Audio Control at EC reg 0x30, fw G4HT39WW-3.22 |
| [ 1.474741] usb 1-1.4: Product: BCM20702A0 |
| [ 1.482153] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 1.482155] usb 1-1.4: SerialNumber: B8763FA80FE2 |
| [ 1.519485] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 1.520503] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 1.531131] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 1.549031] usb 1-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 1.559192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 |
| [ 1.632955] usb 1-1.5: string descriptor 0 read error: -22 |
| [ 1.634419] usb 1-1.5: New USB device found, idVendor=0489, idProduct=e04e |
| [ 1.635909] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.702123] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 1.766544] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.770531] ata2.00: ATA-9: WDC WD20NPVZ-00WFZT0, 01.01A01, max UDMA/133 |
| [ 1.773440] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 1.777368] ata2.00: configured for UDMA/133 |
| [ 1.778791] scsi 1:0:0:0: Direct-Access ATA WDC WD20NPVZ-00W 1A01 PQ: 0 ANSI: 5 |
| [ 1.782300] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 1.782533] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 1.787461] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 1.790084] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 1.792523] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2 |
| [ 1.792574] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 1.793685] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.793753] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.794727] usb 1-1.6: Product: Integrated Camera |
| [ 1.797585] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 1.800571] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2) |
| [ 1.804678] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13 |
| [ 1.860764] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 2.094784] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.110720] ata3.00: ATA-8: KINGSTON SMS200S3240G, 60AABBF0, max UDMA/133 |
| [ 2.113885] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 2.121848] ata3.00: configured for UDMA/133 |
| [ 2.124706] scsi 2:0:0:0: Direct-Access ATA KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5 |
| [ 2.128145] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.128179] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 2.129921] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.134622] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.134655] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.137939] sdc: sdc1 sdc2 sdc3 |
| [ 2.139298] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 2.220650] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.424919] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input12 |
| [ 2.438385] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.750775] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 3.062715] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 3.067537] Freeing unused kernel memory: 1280K |
| [ 3.070619] Write protecting the kernel read-only data: 20480k |
| [ 3.074519] Freeing unused kernel memory: 1972K |
| [ 3.078325] Freeing unused kernel memory: 448K |
| [ 4.184410] fuse init (API version 7.26) |
| [ 4.184636] modprobe (4149) used greatest stack depth: 14216 bytes left |
| [ 4.408586] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 4.591517] lvm (4431) used greatest stack depth: 14088 bytes left |
| [ 4.596166] cryptsetup (4442) used greatest stack depth: 13928 bytes left |
| [ 5.747291] random: crng init done |
| [ 40.311686] cryptsetup (4445) used greatest stack depth: 13656 bytes left |
| [ 40.769885] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) |
| [ 40.770061] mount (4487) used greatest stack depth: 13592 bytes left |
| [ 40.779430] init (4496) used greatest stack depth: 13384 bytes left |
| [ 40.911943] init-early.sh (4510) used greatest stack depth: 13232 bytes left |
| [ 42.337145] udevd[5050]: starting version 3.2.5 |
| [ 42.359882] udevd[5050]: specified group 'colord' unknown |
| [ 42.397299] udevd[5051]: starting eudev-3.2.5 |
| [ 42.460408] udevd[5051]: specified group 'colord' unknown |
| [ 42.483075] openrc (4508) used greatest stack depth: 12936 bytes left |
| [ 42.526488] ath: phy0: ASPM enabled: 0x43 |
| [ 42.526490] ath: EEPROM regdomain: 0x6c |
| [ 42.526491] ath: EEPROM indicates we should expect a direct regpair map |
| [ 42.526493] ath: Country alpha2 being used: 00 |
| [ 42.526494] ath: Regpair used: 0x6c |
| [ 42.526991] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 42.527277] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90003580000, irq=17 |
| [ 42.555661] usbcore: registered new interface driver btusb |
| [ 42.562626] vboxdrv: loading out-of-tree module taints kernel. |
| [ 42.563865] vboxdrv: Found 8 processor cores |
| [ 42.579296] vboxdrv: TSC mode is Invariant, tentative frequency 2693865211 Hz |
| [ 42.579297] vboxdrv: Successfully loaded version 5.1.36 (interface 0x002a0000) |
| [ 42.581591] VBoxNetFlt: Successfully started. |
| [ 42.586451] VBoxNetAdp: Successfully started. |
| [ 42.596225] VBoxPciLinuxInit |
| [ 42.596230] vboxpci: pci-stub module not available, cannot detach PCI devices |
| [ 42.596231] vboxpci: IOMMU not found (not registered) |
| [ 42.663414] hdaps: supported laptop not found! |
| [ 42.663415] hdaps: driver init failed (ret=-19)! |
| [ 42.665853] Bluetooth: hci0: BCM: chip id 63 |
| [ 42.666891] Bluetooth: hci0: BCM: features 0x07 |
| [ 42.682815] Bluetooth: hci0: BCM20702A |
| [ 42.683817] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 42.685699] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 42.685701] bluetooth hci0: Falling back to user helper |
| [ 42.715896] i2c /dev entries driver |
| [ 42.755984] usbcore: registered new interface driver cdc_ether |
| [ 42.768382] usbcore: registered new interface driver cdc_acm |
| [ 42.768383] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 42.781077] usbcore: registered new interface driver ipheth |
| [ 42.793601] usbcore: registered new interface driver cdc_subset |
| [ 42.816386] usbcore: registered new interface driver rndis_host |
| [ 42.979572] Intel(R) Wireless WiFi driver for Linux |
| [ 42.979573] Copyright(c) 2003- 2015 Intel Corporation |
| [ 43.191129] EXT4-fs (dm-3): re-mounted. Opts: discard |
| [ 43.315100] Adding 4194300k swap on /dev/mapper/vg-swap. Priority:-2 extents:1 across:4194300k SS |
| [ 43.987646] ip (6156) used greatest stack depth: 12872 bytes left |
| [ 45.701649] usb 1-1.4: USB disconnect, device number 3 |
| [ 47.633830] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 62.432078] cfg80211: failed to load regulatory.db |
| [ 103.392134] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 103.392195] Bluetooth: hci0: sending frame failed (-19) |
| [ 105.440098] Bluetooth: hci0: command 0x1009 tx timeout |
| [ 107.948897] PM: suspend entry (deep) |
| [ 107.948901] PM: Syncing filesystems ... done. |
| [ 107.952294] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 107.953676] OOM killer disabled. |
| [ 107.953677] Freezing remaining freezable tasks ... |
| [ 113.632097] Bluetooth: hci0: BCM: Reading device address failed (-110) |
| [ 113.632169] Bluetooth: hci0: sending frame failed (-19) |
| [ 114.350396] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 114.350400] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 114.350732] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 114.350735] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 117.728116] thinkpad_acpi: fan watchdog: enabling fan |
| [ 123.980513] usb 1-1.5: USB disconnect, device number 4 |
| [ 124.097095] (elapsed 16.143 seconds) done. |
| [ 124.097123] Suspending console(s) (use no_console_suspend to debug) |
| [ 124.103143] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [ 124.103179] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 124.103407] sd 1:0:0:0: [sdb] Stopping disk |
| [ 124.107348] sd 2:0:0:0: [sdc] Stopping disk |
| [ 124.235166] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 124.235421] sd 0:0:0:0: [sda] Stopping disk |
| [ 124.272762] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 124.815292] ACPI: EC: interrupt blocked |
| [ 124.840563] ACPI: Preparing to enter system sleep state S3 |
| [ 124.843596] ACPI: EC: event blocked |
| [ 124.843597] ACPI: EC: EC stopped |
| [ 124.843598] PM: Saving platform NVS memory |
| [ 124.843600] Disabling non-boot CPUs ... |
| [ 124.850522] smpboot: CPU 1 is now offline |
| [ 124.862531] smpboot: CPU 2 is now offline |
| [ 124.878491] smpboot: CPU 3 is now offline |
| [ 124.893474] smpboot: CPU 4 is now offline |
| [ 124.911432] smpboot: CPU 5 is now offline |
| [ 124.926479] smpboot: CPU 6 is now offline |
| [ 124.933408] smpboot: CPU 7 is now offline |
| [ 124.934986] ACPI: Low-level resume complete |
| [ 124.935026] ACPI: EC: EC started |
| [ 124.935027] PM: Restoring platform NVS memory |
| [ 124.935341] mce: [Hardware Error]: Machine check events logged |
| [ 124.935344] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a |
| [ 124.935345] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 |
| [ 124.935347] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 6121419857 SOCKET 0 APIC 0 microcode 1f |
| [ 124.935348] mce: [Hardware Error]: Machine check events logged |
| [ 124.935349] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a |
| [ 124.935349] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 |
| [ 124.935351] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 6121419857 SOCKET 0 APIC 0 microcode 1f |
| [ 124.935354] Enabling non-boot CPUs ... |
| [ 124.935382] x86: Booting SMP configuration: |
| [ 124.935383] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 124.938151] cache: parent cpu1 should not be sleeping |
| [ 124.938312] CPU1 is up |
| [ 124.938341] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 124.941062] cache: parent cpu2 should not be sleeping |
| [ 124.941225] CPU2 is up |
| [ 124.941261] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 124.944009] cache: parent cpu3 should not be sleeping |
| [ 124.944182] CPU3 is up |
| [ 124.944210] smpboot: Booting Node 0 Processor 4 APIC 0x4 |
| [ 124.946908] cache: parent cpu4 should not be sleeping |
| [ 124.947084] CPU4 is up |
| [ 124.947119] smpboot: Booting Node 0 Processor 5 APIC 0x5 |
| [ 124.949839] cache: parent cpu5 should not be sleeping |
| [ 124.950010] CPU5 is up |
| [ 124.950046] smpboot: Booting Node 0 Processor 6 APIC 0x6 |
| [ 124.952764] cache: parent cpu6 should not be sleeping |
| [ 124.952975] CPU6 is up |
| [ 124.953004] smpboot: Booting Node 0 Processor 7 APIC 0x7 |
| [ 124.955673] cache: parent cpu7 should not be sleeping |
| [ 124.955877] CPU7 is up |
| [ 124.961852] ACPI: Waking up from system sleep state S3 |
| [ 124.964244] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 124.964285] ACPI: EC: interrupt unblocked |
| [ 124.988069] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 124.988090] sdhci-pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function) |
| [ 124.988091] sdhci-pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller |
| [ 125.025777] ACPI: EC: event unblocked |
| [ 125.025933] ath: phy0: ASPM enabled: 0x43 |
| [ 125.026125] sd 2:0:0:0: [sdc] Starting disk |
| [ 125.026126] sd 0:0:0:0: [sda] Starting disk |
| [ 125.026127] sd 1:0:0:0: [sdb] Starting disk |
| [ 125.026341] rtc_cmos 00:03: Alarms can be up to one month in the future |
| [ 125.259614] usb 1-1: reset high-speed USB device number 2 using ehci-pci |
| [ 125.335651] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 125.335683] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 125.335708] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 125.335740] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 125.335764] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 125.337525] ata1.00: configured for UDMA/133 |
| [ 125.362227] ata3.00: configured for UDMA/133 |
| [ 125.665584] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 125.705371] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 126.115638] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 126.309490] ata2.00: configured for UDMA/133 |
| [ 126.346314] OOM killer enabled. |
| [ 126.346315] Restarting tasks ... done. |
| [ 126.356389] video LNXVIDEO:00: Restoring backlight state |
| [ 126.356454] PM: suspend exit |
| [ 167.500907] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 167.501020] ip (7744) used greatest stack depth: 12800 bytes left |
| [ 171.651071] wlan0: authenticate with 64:d1:54:78:39:b7 |
| [ 171.665028] wlan0: send auth to 64:d1:54:78:39:b7 (try 1/3) |
| [ 171.665971] wlan0: authenticated |
| [ 171.666559] wlan0: associate with 64:d1:54:78:39:b7 (try 1/3) |
| [ 171.669221] wlan0: RX AssocResp from 64:d1:54:78:39:b7 (capab=0x431 status=0 aid=2) |
| [ 171.669368] wlan0: associated |
| [ 171.682626] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 1056.440387] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 1056.440390] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 1056.440460] device virbr0-nic entered promiscuous mode |
| [ 1056.521103] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 1056.521107] virbr0: port 1(virbr0-nic) entered listening state |
| [ 1056.547785] virbr0: port 1(virbr0-nic) entered disabled state |