blob: f361fca8350947f7da375326fe630a15d1f6e865 [file] [log] [blame]
[ 1.401532] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 1.401607] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.401686] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 1.401764] ACPI: Interpreter enabled
[ 1.401853] ACPI: (supports S0 S3 S4 S5)
[ 1.401924] ACPI: Using IOAPIC for interrupt routing
[ 1.402015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.402239] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.407919] ACPI: Power Resource [FPWR] (off)
[ 1.408327] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.408408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.408530] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.408618] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 1.408800] PCI host bridge to bus 0000:00
[ 1.408875] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.408954] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.409031] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.409110] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 1.409189] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 1.409268] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 1.409347] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 1.409426] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 1.409505] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 1.409584] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 1.409663] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 1.409741] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 1.409820] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 1.409900] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 1.409979] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 1.410004] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 1.410083] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[ 1.410160] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 1.410240] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.410322] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.410409] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.410420] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 1.410425] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.410429] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 1.410500] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[ 1.410510] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[ 1.410713] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.410812] pci 0000:00:16.0: reg 0x10: [mem 0xe1632000-0xe163200f 64bit]
[ 1.411148] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.411242] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 1.411262] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 1.411271] pci 0000:00:19.0: reg 0x14: [mem 0xe162c000-0xe162cfff]
[ 1.411280] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 1.411341] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.411402] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.411425] pci 0000:00:1a.0: reg 0x10: [mem 0xe162f000-0xe162f3ff]
[ 1.411510] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.411579] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.411602] pci 0000:00:1b.0: reg 0x10: [mem 0xe1628000-0xe162bfff 64bit]
[ 1.411678] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.411753] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
[ 1.411891] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.411920] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 1.411997] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 1.412140] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
[ 1.412277] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.412303] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 1.412380] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 1.412522] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
[ 1.412658] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.412683] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 1.412760] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 1.412902] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.412925] pci 0000:00:1d.0: reg 0x10: [mem 0xe1630000-0xe16303ff]
[ 1.413010] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.413074] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.413173] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 1.413339] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.413361] pci 0000:00:1f.2: reg 0x10: [io 0x30a0-0x30a7]
[ 1.413369] pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3]
[ 1.413378] pci 0000:00:1f.2: reg 0x18: [io 0x30a8-0x30af]
[ 1.413387] pci 0000:00:1f.2: reg 0x1c: [io 0x30c4-0x30c7]
[ 1.413396] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 1.413405] pci 0000:00:1f.2: reg 0x24: [mem 0xe162e000-0xe162e7ff]
[ 1.413451] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.413513] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.413533] pci 0000:00:1f.3: reg 0x10: [mem 0xe1631000-0xe16310ff 64bit]
[ 1.413554] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 1.413633] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[ 1.413652] pci 0000:00:1f.5: reg 0x10: [io 0x30b0-0x30b7]
[ 1.413660] pci 0000:00:1f.5: reg 0x14: [io 0x30c8-0x30cb]
[ 1.413669] pci 0000:00:1f.5: reg 0x18: [io 0x30b8-0x30bf]
[ 1.413678] pci 0000:00:1f.5: reg 0x1c: [io 0x30cc-0x30cf]
[ 1.413687] pci 0000:00:1f.5: reg 0x20: [io 0x3080-0x308f]
[ 1.413696] pci 0000:00:1f.5: reg 0x24: [io 0x3090-0x309f]
[ 1.413785] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[ 1.413810] pci 0000:00:1f.6: reg 0x10: [mem 0xe162d000-0xe162dfff 64bit]
[ 1.414117] pci 0000:01:00.0: [8086:0085] type 00 class 0x028000
[ 1.414358] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe1401fff 64bit]
[ 1.415150] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.440185] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.440269] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 1.440337] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.440415] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.440421] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff]
[ 1.440428] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 1.440521] pci 0000:03:00.0: [1180:e823] type 00 class 0x080501
[ 1.440562] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[ 1.440660] pci 0000:03:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 1.440766] pci 0000:03:00.0: MMC cards are now supported by standard SDHCI controller
[ 1.440895] pci 0000:03:00.0: reg 0x10: [mem 0xe1501000-0xe15010ff]
[ 1.441202] pci 0000:03:00.0: supports D1 D2
[ 1.441203] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.441343] pci 0000:03:00.1: [1180:e232] type 00 class 0x088000
[ 1.441408] pci 0000:03:00.1: reg 0x10: [mem 0xe1502000-0xe15020ff]
[ 1.441696] pci 0000:03:00.1: supports D1 D2
[ 1.441697] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.441821] pci 0000:03:00.3: [1180:e832] type 00 class 0x0c0010
[ 1.441883] pci 0000:03:00.3: reg 0x10: [mem 0xe1500000-0xe15007ff]
[ 1.442052] pci 0000:03:00.3: Enabling fixed DMA alias to 00.0
[ 1.442247] pci 0000:03:00.3: supports D1 D2
[ 1.442249] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.470077] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.470184] pci 0000:00:1c.3: bridge window [mem 0xe1500000-0xe15fffff]
[ 1.470256] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 1.470341] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 1.470343] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.470344] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.470346] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 1.470347] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 1.470349] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 1.470350] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 1.470352] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 1.470353] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 1.470355] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 1.470356] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 1.470358] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 1.470359] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 1.470360] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 1.470362] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 1.470363] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 1.470365] pci 0000:00:1e.0: bridge window [mem 0x82a00001-0xefffffff window] (subtractive decode)
[ 1.470366] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 1.470486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.470608] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.470729] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.470849] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.470968] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.471087] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.471206] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.471325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.472392] ACPI: EC: interrupt unblocked
[ 1.472471] ACPI: EC: event unblocked
[ 1.472548] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.472627] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 1.472770] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.472770] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.472770] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.472770] vgaarb: loaded
[ 1.472770] SCSI subsystem initialized
[ 1.472770] libata version 3.00 loaded.
[ 1.472770] ACPI: bus type USB registered
[ 1.472770] usbcore: registered new interface driver usbfs
[ 1.472770] usbcore: registered new interface driver hub
[ 1.472770] usbcore: registered new device driver usb
[ 1.472770] pps_core: LinuxPPS API ver. 1 registered
[ 1.472770] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.472770] PTP clock support registered
[ 1.472770] EDAC MC: Ver: 3.0.0
[ 1.472770] PCI: Using ACPI for IRQ routing
[ 1.472770] PCI: pci_cache_line_size set to 64 bytes
[ 1.472770] e820: reserve RAM buffer [mem 0x7ff05000-0x7fffffff]
[ 1.472770] e820: reserve RAM buffer [mem 0x2fb600000-0x2fbffffff]
[ 1.472770] Bluetooth: Core ver 2.22
[ 1.472770] NET: Registered protocol family 31
[ 1.472770] Bluetooth: HCI device and connection manager initialized
[ 1.472770] Bluetooth: HCI socket layer initialized
[ 1.472770] Bluetooth: L2CAP socket layer initialized
[ 1.472770] Bluetooth: SCO socket layer initialized
[ 1.472770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.472770] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.480003] clocksource: Switched to clocksource hpet
[ 1.480013] VFS: Disk quotas dquot_6.6.0
[ 1.480013] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.480102] FS-Cache: Loaded
[ 1.481912] pnp: PnP ACPI init
[ 1.482058] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.482137] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.482215] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.482294] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.482372] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 1.482449] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.482528] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.482605] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.482683] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 1.482760] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 1.482842] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.483367] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.483448] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.483488] system 00:02: [io 0x0500-0x057f] has been reserved
[ 1.483564] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 1.483644] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.483661] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.483688] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.483709] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.483728] pnp: PnP ACPI: found 6 devices
[ 1.488342] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.488495] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.488577] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 1.488664] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.488743] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.488826] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff]
[ 1.488907] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 1.488993] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.489074] pci 0000:00:1c.3: bridge window [mem 0xe1500000-0xe15fffff]
[ 1.489162] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 1.489247] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.489249] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.489251] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.489252] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.489254] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.489255] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.489257] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.489258] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.489260] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.489261] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.489263] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.489264] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.489266] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.489267] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.489268] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.489270] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.489271] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[ 1.489273] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 1.489275] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 1.489276] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.489278] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 1.489279] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 1.489281] pci_bus 0000:03: resource 1 [mem 0xe1500000-0xe15fffff]
[ 1.489282] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 1.489284] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 1.489285] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.489287] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.489288] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.489290] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.489291] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.489293] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.489294] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.489296] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.489297] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.489299] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.489300] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.489302] pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.489303] pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.489304] pci_bus 0000:04: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.489306] pci_bus 0000:04: resource 20 [mem 0x82a00001-0xefffffff window]
[ 1.489307] pci_bus 0000:04: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 1.489375] NET: Registered protocol family 2
[ 1.489639] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.489949] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.490184] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.490309] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.490438] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.490588] NET: Registered protocol family 1
[ 1.490811] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.491260] PCI: CLS 64 bytes, default 64
[ 1.491315] DMAR: No RMRR found
[ 1.491387] DMAR: No ATSR found
[ 1.491489] DMAR: dmar0: Using Queued invalidation
[ 1.491568] DMAR: dmar1: Using Queued invalidation
[ 1.491855] DMAR: Setting RMRR:
[ 1.491927] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 1.492067] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.492442] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.492556] iommu: Adding device 0000:00:00.0 to group 0
[ 1.492638] iommu: Adding device 0000:00:02.0 to group 1
[ 1.492721] iommu: Adding device 0000:00:04.0 to group 2
[ 1.492809] iommu: Adding device 0000:00:16.0 to group 3
[ 1.492891] iommu: Adding device 0000:00:19.0 to group 4
[ 1.492973] iommu: Adding device 0000:00:1a.0 to group 5
[ 1.493055] iommu: Adding device 0000:00:1b.0 to group 6
[ 1.493138] iommu: Adding device 0000:00:1c.0 to group 7
[ 1.493221] iommu: Adding device 0000:00:1c.1 to group 8
[ 1.493302] iommu: Adding device 0000:00:1c.3 to group 9
[ 1.493385] iommu: Adding device 0000:00:1d.0 to group 10
[ 1.493466] iommu: Adding device 0000:00:1e.0 to group 11
[ 1.493564] iommu: Adding device 0000:00:1f.0 to group 12
[ 1.493647] iommu: Adding device 0000:00:1f.2 to group 12
[ 1.493729] iommu: Adding device 0000:00:1f.3 to group 12
[ 1.493812] iommu: Adding device 0000:00:1f.5 to group 12
[ 1.493894] iommu: Adding device 0000:00:1f.6 to group 12
[ 1.493978] iommu: Adding device 0000:01:00.0 to group 13
[ 1.494144] iommu: Adding device 0000:03:00.0 to group 14
[ 1.494245] iommu: Adding device 0000:03:00.1 to group 14
[ 1.494326] iommu: Adding device 0000:03:00.3 to group 14
[ 1.496391] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 1.496470] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.496546] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.496621] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 1.497361] Scanning for low memory corruption every 60 seconds
[ 1.499416] AVX2 or AES-NI instructions are not detected.
[ 1.499493] AVX2 instructions are not detected.
[ 1.499845] Initialise system trusted keyrings
[ 1.499954] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.500826] zbud: loaded
[ 1.501332] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.501440] fuse init (API version 7.26)
[ 1.503325] NET: Registered protocol family 38
[ 1.503435] Key type asymmetric registered
[ 1.503510] Asymmetric key parser 'x509' registered
[ 1.503606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.503727] io scheduler noop registered
[ 1.504303] io scheduler deadline registered (default)
[ 1.504408] io scheduler cfq registered
[ 1.504480] io scheduler mq-deadline registered (default)
[ 1.504555] io scheduler kyber registered
[ 1.505281] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 1.505380] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 1.505476] pcieport 0000:00:1c.3: Signaling PME with IRQ 28
[ 1.517020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.517534] Non-volatile memory driver v1.3
[ 1.517672] Linux agpgart interface v0.103
[ 1.517765] intel_idle: MWAIT substates: 0x21120
[ 1.517766] intel_idle: v0.4.1 model 0x2A
[ 1.517910] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.518105] ACPI: AC Adapter [AC] (on-line)
[ 1.518231] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0E:00/input/input0
[ 1.518363] ACPI: Sleep Button [SLPB]
[ 1.518466] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.518588] ACPI: Lid Switch [LID]
[ 1.518692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.518781] ACPI: Power Button [PWRF]
[ 1.520690] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.521497] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.521573] ACPI: Thermal Zone [THM0] (33 C)
[ 1.522392] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.522468] ACPI: Thermal Zone [THM1] (27 C)
[ 1.522607] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 1.523212] [drm] Disabling PPGTT because VT-d is on
[ 1.523379] [drm] Memory usable by graphics device = 2048M
[ 1.523455] [drm] VT-d active for gfx access
[ 1.523566] [drm] Replacing VGA console driver
[ 1.524208] Console: switching to colour dummy device 80x25
[ 1.524245] [drm] DMAR active, disabling use of stolen memory
[ 1.534038] ACPI: Battery Slot [BAT0] (battery present)
[ 1.534179] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.590710] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.590724] [drm] Driver supports precise vblank timestamp query.
[ 1.590907] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.713519] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.713648] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.714745] acpi device:03: registered as cooling_device5
[ 1.714787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.716726] brd: module loaded
[ 1.717960] loop: module loaded
[ 1.718023] Loading iSCSI transport class v2.0-870.
[ 1.718127] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 1.718257] ahci 0000:00:1f.2: version 3.0
[ 1.728615] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.728648] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.729345] scsi host0: ahci
[ 1.729471] scsi host1: ahci
[ 1.729564] scsi host2: ahci
[ 1.729887] scsi host3: ahci
[ 1.729978] scsi host4: ahci
[ 1.730090] scsi host5: ahci
[ 1.730123] ata1: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e100 irq 30
[ 1.730128] ata2: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e180 irq 30
[ 1.730132] ata3: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e200 irq 30
[ 1.730136] ata4: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e280 irq 30
[ 1.730141] ata5: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e300 irq 30
[ 1.730143] ata6: DUMMY
[ 1.730217] ata_piix 0000:00:1f.5: version 2.13
[ 1.730230] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.900282] scsi host6: ata_piix
[ 1.900487] scsi host7: ata_piix
[ 1.900528] ata7: SATA max UDMA/133 cmd 0x30b0 ctl 0x30c8 bmdma 0x3080
[ 1.900534] ata8: SATA max UDMA/133 cmd 0x30b8 ctl 0x30cc bmdma 0x3088
[ 1.900717] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 1.900807] tun: Universal TUN/TAP device driver, 1.6
[ 1.900860] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.900862] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.900878] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.900881] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.900949] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.038953] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.039235] fbcon: inteldrmfb (fb0) is primary device
[ 2.061974] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.062023] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.062060] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.062084] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.062105] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.062359] ata1.00: supports DRM functions and may not be fully accessible
[ 2.063651] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT30, max UDMA/66
[ 2.063827] ata1.00: disabling queued TRIM support
[ 2.063832] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 2.063836] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.065261] ata1.00: supports DRM functions and may not be fully accessible
[ 2.065514] ata2.00: configured for UDMA/66
[ 2.065893] ata1.00: disabling queued TRIM support
[ 2.066922] ata1.00: configured for UDMA/133
[ 2.168873] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:ad:2d:b5
[ 2.168875] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.168931] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.168961] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 2.168962] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.168978] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 2.168978] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.168988] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 2.168988] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 2.169021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.169022] ehci-pci: EHCI PCI platform driver
[ 2.169141] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.169146] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.169159] ehci-pci 0000:00:1a.0: debug port 2
[ 2.173115] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.173133] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe162f000
[ 2.200137] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.200210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.200212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.200214] usb usb1: Product: EHCI Host Controller
[ 2.200215] usb usb1: Manufacturer: Linux 4.15.7-gentoo-64bit ehci_hcd
[ 2.200216] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.200373] hub 1-0:1.0: USB hub found
[ 2.200379] hub 1-0:1.0: 3 ports detected
[ 2.200585] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.200590] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.200603] ehci-pci 0000:00:1d.0: debug port 2
[ 2.204547] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.204565] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1630000
[ 2.230126] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.230200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.230201] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.230203] usb usb2: Product: EHCI Host Controller
[ 2.230204] usb usb2: Manufacturer: Linux 4.15.7-gentoo-64bit ehci_hcd
[ 2.230205] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.230351] hub 2-0:1.0: USB hub found
[ 2.230357] hub 2-0:1.0: 3 ports detected
[ 2.230479] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.230511] usbcore: registered new interface driver usb-storage
[ 2.230530] usbcore: registered new interface driver usbserial_generic
[ 2.230535] usbserial: USB Serial support registered for generic
[ 2.230540] usbcore: registered new interface driver cp210x
[ 2.230545] usbserial: USB Serial support registered for cp210x
[ 2.230577] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.232635] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.235809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.235835] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.235927] mousedev: PS/2 mouse device common for all mice
[ 2.236111] rtc_cmos 00:03: RTC can wake from S4
[ 2.236233] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.236261] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.236274] IR NEC protocol handler initialized
[ 2.236274] IR RC5(x/sz) protocol handler initialized
[ 2.236275] IR RC6 protocol handler initialized
[ 2.236275] IR JVC protocol handler initialized
[ 2.236276] IR Sony protocol handler initialized
[ 2.236276] IR SANYO protocol handler initialized
[ 2.236277] IR Sharp protocol handler initialized
[ 2.236277] IR MCE Keyboard/mouse protocol handler initialized
[ 2.236278] IR XMP protocol handler initialized
[ 2.236439] Bluetooth: HCI UART driver ver 2.3
[ 2.236440] Bluetooth: HCI UART protocol H4 registered
[ 2.236441] Bluetooth: HCI UART protocol BCSP registered
[ 2.236442] Bluetooth: HCI UART protocol ATH3K registered
[ 2.236442] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.236452] usbcore: registered new interface driver btusb
[ 2.236456] intel_pstate: Intel P-state driver initializing
[ 2.236856] sdhci: Secure Digital Host Controller Interface driver
[ 2.236857] sdhci: Copyright(c) Pierre Ossman
[ 2.236899] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 2.237758] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.238042] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 2.238172] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.238214] usbcore: registered new interface driver usbhid
[ 2.238216] usbhid: USB HID core driver
[ 2.238409] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.238411] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.238413] thinkpad_acpi: ThinkPad BIOS CBET4000 97ab880082, EC 8AHT42WW-3.20
[ 2.238415] thinkpad_acpi: Lenovo ThinkPad T520, model 4243F54
[ 2.239213] thinkpad_acpi: radio switch found; radios are enabled
[ 2.239425] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 2.239459] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.239460] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.240082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.243909] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.243911] thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel
[ 2.244876] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.245198] Netfilter messages via NETLINK v0.30.
[ 2.245206] nfnl_acct: registering with nfnetlink.
[ 2.245556] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 2.245778] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 2.245783] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[ 2.245978] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.246813] Initializing XFRM netlink socket
[ 2.247045] NET: Registered protocol family 10
[ 2.247651] Segment Routing with IPv6
[ 2.247698] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.248037] NET: Registered protocol family 17
[ 2.248046] NET: Registered protocol family 15
[ 2.248076] Bridge firewalling registered
[ 2.248155] Bluetooth: RFCOMM TTY layer initialized
[ 2.248159] Bluetooth: RFCOMM socket layer initialized
[ 2.248173] Bluetooth: RFCOMM ver 1.11
[ 2.248179] 8021q: 802.1Q VLAN Support v1.8
[ 2.248201] Key type dns_resolver registered
[ 2.248874] microcode: sig=0x206a7, pf=0x10, revision=0x29
[ 2.248922] microcode: Microcode Update Driver: v2.2.
[ 2.248933] AVX version of gcm_enc/dec engaged.
[ 2.248933] AES CTR mode by8 optimization enabled
[ 2.250523] sched_clock: Marking stable (2250518513, 0)->(2198748632, 51769881)
[ 2.250729] registered taskstats version 1
[ 2.250730] Loading compiled-in X.509 certificates
[ 2.250762] zswap: loaded using pool lz4/zbud
[ 2.251011] Btrfs loaded, crc32c=crc32c-intel
[ 2.251196] Key type encrypted registered
[ 2.251593] rtc_cmos 00:03: setting system clock to 2018-03-04 09:08:01 UTC (1520154481)
[ 2.251620] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.252036] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.252056] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.252057] cfg80211: failed to load regulatory.db
[ 2.472729] mmc0: new high speed SDXC card at address aaaa
[ 2.473135] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[ 2.493379] mmcblk0: p1
[ 2.550132] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 2.550157] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[ 2.570145] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.600145] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.770946] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.770952] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.771653] hub 1-1:1.0: USB hub found
[ 2.771958] hub 1-1:1.0: 6 ports detected
[ 2.793502] Console: switching to colour frame buffer device 240x67
[ 2.800470] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.800472] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.800743] hub 2-1:1.0: USB hub found
[ 2.800841] hub 2-1:1.0: 8 ports detected
[ 2.916159] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.917476] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.919818] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.919825] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.919839] sd 0:0:0:0: [sda] Write Protect is off
[ 2.919849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.919860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.922607] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.923058] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.928647] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT30 PQ: 0 ANSI: 5
[ 3.000089] ata8: failed to resume link (SControl 0)
[ 3.001475] ata8: SATA link down (SStatus 0 SControl 0)
[ 3.001624] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.015338] PM: Image not found (code -22)
[ 3.016412] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.017606] F2FS-fs (sda3): Can't find valid F2FS filesystem in 1th superblock
[ 3.018997] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.020242] F2FS-fs (sda3): Can't find valid F2FS filesystem in 2th superblock
[ 3.021417] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.022567] F2FS-fs (sda3): Can't find valid F2FS filesystem in 1th superblock
[ 3.023696] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 3.024831] F2FS-fs (sda3): Can't find valid F2FS filesystem in 2th superblock
[ 3.026192] BTRFS: device label root devid 1 transid 61540 /dev/sda3
[ 3.029081] BTRFS info (device sda3): disk space caching is enabled
[ 3.030439] BTRFS info (device sda3): has skinny extents
[ 3.100078] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 3.120100] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.255126] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 3.258690] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.261957] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 3.263229] usb 1-1.4: Manufacturer: Broadcom Corp
[ 3.264411] usb 1-1.4: SerialNumber: E4D53DD5B794
[ 3.281130] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[ 3.282997] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.284830] usb 2-1.4: Product: F5521gw
[ 3.286653] usb 2-1.4: Manufacturer: Lenovo
[ 3.288466] usb 2-1.4: SerialNumber: A852467338A3D820
[ 3.420133] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[ 3.469701] BTRFS info (device sda3): enabling ssd optimizations
[ 3.475193] VFS: Mounted root (btrfs filesystem) readonly on device 0:18.
[ 3.479126] devtmpfs: mounted
[ 3.483082] Freeing unused kernel memory: 1740K
[ 3.484553] Write protecting the kernel read-only data: 20480k
[ 3.486737] Freeing unused kernel memory: 1984K
[ 3.491964] Freeing unused kernel memory: 1360K
[ 3.493417] rodata_test: all tests were successful
[ 3.560554] clocksource: Switched to clocksource tsc
[ 3.577295] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[ 3.579671] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.581912] usb 2-1.5: Product: Integrated Smart Card Reader
[ 3.584013] usb 2-1.5: Manufacturer: Lenovo
[ 5.218363] udevd[837]: starting version 3.2.5
[ 5.242225] udevd[837]: specified group 'colord' unknown
[ 5.259207] udevd[866]: starting eudev-3.2.5
[ 5.341291] udevd[866]: specified group 'colord' unknown
[ 5.380058] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170831/utaddress-247)
[ 5.380066] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.380070] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170831/utaddress-247)
[ 5.380074] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.380075] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170831/utaddress-247)
[ 5.380080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.380081] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170831/utaddress-247)
[ 5.380086] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.380087] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.387704] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.389769] Intel(R) Wireless WiFi driver for Linux
[ 5.389771] Copyright(c) 2003- 2015 Intel Corporation
[ 5.409380] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.418495] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 5.434998] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 5.435001] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 5.435002] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 5.435004] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 5.451456] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[ 5.451509] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[ 5.451535] usbcore: registered new interface driver cdc_wdm
[ 5.451820] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 5.452322] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 5.452684] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 5.452974] usbcore: registered new interface driver cdc_acm
[ 5.452975] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.462044] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.462047] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.462182] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.470238] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.471619] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff820e3dc0)
[ 5.481159] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 5.481509] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 5.481555] usbcore: registered new interface driver cdc_ncm
[ 5.483088] usbcore: registered new interface driver cdc_mbim
[ 5.485303] BTRFS: device label data devid 1 transid 6493 /dev/sda7
[ 5.491056] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 5.491547] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 5.491550] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.491553] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 5.491555] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 5.491557] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 5.491559] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 5.491561] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 5.491563] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 5.492863] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 5.499030] coretemp coretemp.0: TjMax is 100 degrees C
[ 5.499040] coretemp coretemp.0: TjMax is 100 degrees C
[ 5.499643] coretemp coretemp.0: TjMax is 100 degrees C
[ 5.510151] firewire_ohci 0000:03:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 5.513206] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.513544] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.513604] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.513661] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.513717] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.513777] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.513857] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.513923] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.548288] BTRFS: device label SD-CARD devid 1 transid 1166 /dev/mmcblk0p1
[ 5.573994] iTCO_vendor_support: vendor-support=0
[ 5.580287] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.580334] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[ 5.581648] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.020361] firewire_core 0000:03:00.3: created device fw0: GUID 0000000000000000, S400
[ 6.361321] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 6.366862] Adding 4194300k swap on /dev/sda6. Priority:-2 extents:1 across:4194300k SSFS
[ 6.444653] BTRFS info (device sda3): use zstd compression, level 0
[ 6.444659] BTRFS info (device sda3): disk space caching is enabled
[ 6.459150] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 6.459156] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 6.522236] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 6.579309] BTRFS info (device sda7): use zstd compression, level 0
[ 6.579315] BTRFS info (device sda7): disk space caching is enabled
[ 6.579317] BTRFS info (device sda7): has skinny extents
[ 6.589250] BTRFS info (device sda7): enabling ssd optimizations
[ 6.996214] zram: Added device: zram0
[ 6.996329] zram: Added device: zram1
[ 6.996452] zram: Added device: zram2
[ 7.008615] zram0: detected capacity change from 0 to 268435456
[ 7.013754] Adding 262140k swap on /dev/zram0. Priority:16383 extents:1 across:262140k SSFS
[ 7.021473] zram1: detected capacity change from 0 to 402653184
[ 7.038135] BTRFS: device fsid 9b34daef-b244-44ff-b325-da7b64e3cca2 devid 1 transid 5 /dev/zram1
[ 7.040102] BTRFS info (device zram1): setting 16 feature flag
[ 7.040106] BTRFS info (device zram1): use zstd compression, level 0
[ 7.040109] BTRFS info (device zram1): turning on discard
[ 7.040111] BTRFS info (device zram1): disk space caching is enabled
[ 7.040112] BTRFS info (device zram1): has skinny extents
[ 7.040114] BTRFS info (device zram1): flagging fs with big metadata feature
[ 7.051319] BTRFS info (device zram1): enabling ssd optimizations
[ 7.051399] BTRFS info (device zram1): creating UUID tree
[ 7.134404] zram2: detected capacity change from 0 to 3145728000
[ 7.172250] BTRFS: device fsid d64d58fa-d630-436c-8999-96f036766ca5 devid 1 transid 5 /dev/zram2
[ 7.173912] BTRFS info (device zram2): setting 16 feature flag
[ 7.173917] BTRFS info (device zram2): use zstd compression, level 0
[ 7.173921] BTRFS info (device zram2): turning on discard
[ 7.173924] BTRFS info (device zram2): disk space caching is enabled
[ 7.173926] BTRFS info (device zram2): has skinny extents
[ 7.173929] BTRFS info (device zram2): flagging fs with big metadata feature
[ 7.174780] BTRFS info (device zram2): enabling ssd optimizations
[ 7.174834] BTRFS info (device zram2): creating UUID tree
[ 7.378323] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.693528] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
[ 7.816385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.090443] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.102007] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.115191] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 8.439356] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 8.556233] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.586398] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 8.899389] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 8.994584] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.106116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.403106] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 12.710638] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 12.810220] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.139498] wlan0: authenticate with 00:16:a6:1f:53:54
[ 16.141514] wlan0: send auth to 00:16:a6:1f:53:54 (try 1/3)
[ 16.143718] wlan0: authenticated
[ 16.150132] wlan0: associate with 00:16:a6:1f:53:54 (try 1/3)
[ 16.153918] wlan0: RX AssocResp from 00:16:a6:1f:53:54 (capab=0x411 status=0 aid=6)
[ 16.174827] wlan0: associated
[ 16.410480] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.470090] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.688710] Ebtables v2.0 registered
[ 17.886859] virbr0: port 1(virbr0-nic) entered blocking state
[ 17.886862] virbr0: port 1(virbr0-nic) entered disabled state
[ 17.886929] device virbr0-nic entered promiscuous mode
[ 18.253848] virbr0: port 1(virbr0-nic) entered blocking state
[ 18.253851] virbr0: port 1(virbr0-nic) entered listening state
[ 18.287691] virbr0: port 1(virbr0-nic) entered disabled state
[ 33.407736] random: crng init done
[ 1385.734286] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 1385.891415] usb 1-1.1: New USB device found, idVendor=0930, idProduct=6545
[ 1385.891425] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1385.891430] usb 1-1.1: Product: DataTraveler 2.0
[ 1385.891436] usb 1-1.1: Manufacturer: Kingston
[ 1385.891440] usb 1-1.1: SerialNumber: C86000BDB6FFEF11EA35B720
[ 1385.892139] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 1385.893316] scsi host8: usb-storage 1-1.1:1.0
[ 1385.909972] usbcore: registered new interface driver uas
[ 1386.977669] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 1386.978321] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1389.229694] sd 8:0:0:0: [sdb] 30497664 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 1389.230600] sd 8:0:0:0: [sdb] Write Protect is off
[ 1389.230608] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1389.231274] sd 8:0:0:0: [sdb] No Caching mode page found
[ 1389.231281] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1389.257705] sdb: sdb1
[ 1389.261271] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 1391.225088] BTRFS: device label VB devid 1 transid 1907 /dev/sdb1
[ 1398.815973] BTRFS info (device sdb1): disk space caching is enabled
[ 1398.815981] BTRFS info (device sdb1): has skinny extents
[ 5520.335230] usb 1-1.1: USB disconnect, device number 4