| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u5 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0 |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
| [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
| [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff9f000 (usable) |
| [ 0.000000] BIOS-e820: 000000007ff9f000 - 0000000080000000 (reserved) |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: MSI MS-7135/MS-7135, BIOS jakllsch 10/26/2015 |
| [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] last_pfn = 0x7ff9f max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 00E0000000 mask FFF0000000 write-combining |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] found SMP MP-table at [ffff8800000f1840] f1840 |
| [ 0.000000] initial memory mapped : 0 - 20000000 |
| [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 |
| [ 0.000000] init_memory_mapping: 0000000000000000-000000007ff9f000 |
| [ 0.000000] 0000000000 - 007fe00000 page 2M |
| [ 0.000000] 007fe00000 - 007ff9f000 page 4k |
| [ 0.000000] kernel direct mapping tables up to 7ff9f000 @ 1fffc000-20000000 |
| [ 0.000000] RAMDISK: 36a56000 - 37523000 |
| [ 0.000000] ACPI: RSDP 00000000000f1a30 00024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 000000007ffb80e0 00064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 000000007ffb99d0 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 000000007ffb8280 01749 (v01 CORE CB-DSDT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 000000007ffb8240 00040 |
| [ 0.000000] ACPI: SSDT 000000007ffb9ad0 0022E (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 000000007ffb9d00 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 000000007ffb9d40 00032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 000000007ffb9d80 00050 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 000000007ffb9dd0 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 000000007ffb9e60 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 000000007ffb9e90 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 |
| [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 |
| [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,7ff9f000) -> [0,7ff9f000) |
| [ 0.000000] Initmem setup node 0 0000000000000000-000000007ff9f000 |
| [ 0.000000] NODE_DATA [000000007ff99000 - 000000007ff9dfff] |
| [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 |
| [ 0.000000] Zone PFN ranges: |
| [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| [ 0.000000] DMA32 0x00001000 -> 0x00100000 |
| [ 0.000000] Normal empty |
| [ 0.000000] Movable zone start PFN for each node |
| [ 0.000000] early_node_map[2] active PFN ranges |
| [ 0.000000] 0: 0x00000010 -> 0x0000009f |
| [ 0.000000] 0: 0x00000100 -> 0x0007ff9f |
| [ 0.000000] On node 0 totalpages: 524078 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 5 pages reserved |
| [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 7111 pages used for memmap |
| [ 0.000000] DMA32 zone: 512984 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x3008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
| [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78912 r8192 d23488 u2097152 |
| [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516906 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Checking aperture... |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] Node 0: aperture @ f0000000 size 64 MB |
| [ 0.000000] Memory: 2047948k/2096764k available (3434k kernel code, 452k absent, 48364k reserved, 3304k data, 580k init) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] Fast TSC calibration using PIT |
| [ 0.000000] Detected 2010.273 MHz processor. |
| [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.54 BogoMIPS (lpj=8041092) |
| [ 0.016004] pid_max: default: 32768 minimum: 301 |
| [ 0.020060] Security Framework initialized |
| [ 0.024010] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.028193] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.036467] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.044516] Mount-cache hash table entries: 256 |
| [ 0.048197] Initializing cgroup subsys cpuacct |
| [ 0.052010] Initializing cgroup subsys memory |
| [ 0.056024] Initializing cgroup subsys devices |
| [ 0.060006] Initializing cgroup subsys freezer |
| [ 0.064006] Initializing cgroup subsys net_cls |
| [ 0.068006] Initializing cgroup subsys blkio |
| [ 0.072017] Initializing cgroup subsys perf_event |
| [ 0.076045] tseg: 0000000000 |
| [ 0.076065] mce: CPU supports 5 MCE banks |
| [ 0.080041] SMP alternatives: switching to UP code |
| [ 0.088248] Freeing SMP alternatives: 8k freed |
| [ 0.092014] ACPI: Core revision 20110623 |
| [ 0.097435] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.139703] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02 |
| [ 0.148008] Performance Events: AMD PMU driver. |
| [ 0.148012] ... version: 0 |
| [ 0.152010] ... bit width: 48 |
| [ 0.156010] ... generic registers: 4 |
| [ 0.160010] ... value mask: 0000ffffffffffff |
| [ 0.164010] ... max period: 00007fffffffffff |
| [ 0.168011] ... fixed-purpose events: 0 |
| [ 0.172011] ... event mask: 000000000000000f |
| [ 0.176234] NMI watchdog enabled, takes one hw-pmu counter. |
| [ 0.180040] Brought up 1 CPUs |
| [ 0.184015] Total of 1 processors activated (4020.54 BogoMIPS). |
| [ 0.192271] devtmpfs: initialized |
| [ 0.199668] print_constraints: dummy: |
| [ 0.200091] NET: Registered protocol family 16 |
| [ 0.204160] node 0 link 0: io port [1000, 4fff] |
| [ 0.204164] TOM: 0000000080000000 aka 2048M |
| [ 0.208017] node 0 link 0: mmio [a0000, bffff] |
| [ 0.208020] node 0 link 0: mmio [f4000000, f44fffff] |
| [ 0.208023] node 0 link 0: mmio [e0000000, efffffff] |
| [ 0.208027] bus: [00, 03] on node 0 link 0 |
| [ 0.208031] bus: 00 index 0 [io 0x0000-0xffff] |
| [ 0.208033] bus: 00 index 1 [mem 0x000a0000-0x000bffff] |
| [ 0.208036] bus: 00 index 2 [mem 0xf0000000-0xfcffffffff] |
| [ 0.208039] bus: 00 index 3 [mem 0x80000000-0xefffffff] |
| [ 0.208053] ACPI: bus type pci registered |
| [ 0.212098] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| [ 0.216015] PCI: not using MMCONFIG |
| [ 0.220015] PCI: Using configuration type 1 for base access |
| [ 0.228093] bio: create slab <bio-0> at 0 |
| [ 0.232129] ACPI: Added _OSI(Module Device) |
| [ 0.236019] ACPI: Added _OSI(Processor Device) |
| [ 0.240016] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.244017] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.248305] ACPI: EC: Look up EC in DSDT |
| [ 0.252622] ACPI: Interpreter enabled |
| [ 0.256020] ACPI: (supports S0 S5) |
| [ 0.259550] ACPI: Using IOAPIC for interrupt routing |
| [ 0.260045] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| [ 0.264690] [Firmware Bug]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources |
| [ 0.268018] PCI: not using MMCONFIG |
| [ 0.274004] ACPI: No dock devices found. |
| [ 0.276026] HEST: Table not found. |
| [ 0.280022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.289654] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03]) |
| [ 0.300084] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] |
| [ 0.304021] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x4fff] |
| [ 0.308021] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xefffffff] |
| [ 0.312021] pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xf44fffff] |
| [ 0.316021] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] |
| [ 0.320021] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] |
| [ 0.324023] pci_root PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored |
| [ 0.328040] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 |
| [ 0.328115] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 |
| [ 0.328122] pci 0000:00:01.0: reg 10: [io 0x4400-0x447f] |
| [ 0.328154] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 |
| [ 0.328162] pci 0000:00:01.1: reg 10: [io 0x4800-0x481f] |
| [ 0.328175] pci 0000:00:01.1: reg 20: [io 0x4480-0x44bf] |
| [ 0.328180] pci 0000:00:01.1: reg 24: [io 0x44c0-0x44ff] |
| [ 0.328195] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.328214] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 |
| [ 0.328223] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf4400fff] |
| [ 0.328249] pci 0000:00:02.0: supports D1 D2 |
| [ 0.328252] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.328267] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 |
| [ 0.328276] pci 0000:00:02.1: reg 10: [mem 0xf4405000-0xf44050ff] |
| [ 0.328309] pci 0000:00:02.1: supports D1 D2 |
| [ 0.328311] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.328332] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 |
| [ 0.328340] pci 0000:00:04.0: reg 10: [io 0x3c00-0x3cff] |
| [ 0.328345] pci 0000:00:04.0: reg 14: [io 0x4000-0x40ff] |
| [ 0.328351] pci 0000:00:04.0: reg 18: [mem 0xf4401000-0xf4401fff] |
| [ 0.328373] pci 0000:00:04.0: supports D1 D2 |
| [ 0.328386] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 |
| [ 0.328404] pci 0000:00:06.0: reg 20: [io 0x4820-0x482f] |
| [ 0.328431] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101 |
| [ 0.328439] pci 0000:00:07.0: reg 10: [io 0x4850-0x4857] |
| [ 0.328444] pci 0000:00:07.0: reg 14: [io 0x4878-0x487b] |
| [ 0.328449] pci 0000:00:07.0: reg 18: [io 0x4858-0x485f] |
| [ 0.328454] pci 0000:00:07.0: reg 1c: [io 0x487c-0x487f] |
| [ 0.328459] pci 0000:00:07.0: reg 20: [io 0x4830-0x483f] |
| [ 0.328465] pci 0000:00:07.0: reg 24: [mem 0xf4402000-0xf4402fff] |
| [ 0.328489] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101 |
| [ 0.328497] pci 0000:00:08.0: reg 10: [io 0x4860-0x4867] |
| [ 0.328502] pci 0000:00:08.0: reg 14: [io 0x4880-0x4883] |
| [ 0.328507] pci 0000:00:08.0: reg 18: [io 0x4868-0x486f] |
| [ 0.328513] pci 0000:00:08.0: reg 1c: [io 0x4884-0x4887] |
| [ 0.328518] pci 0000:00:08.0: reg 20: [io 0x4840-0x484f] |
| [ 0.328523] pci 0000:00:08.0: reg 24: [mem 0xf4403000-0xf4403fff] |
| [ 0.328547] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 |
| [ 0.328578] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 |
| [ 0.328587] pci 0000:00:0a.0: reg 10: [mem 0xf4404000-0xf4404fff] |
| [ 0.328593] pci 0000:00:0a.0: reg 14: [io 0x4870-0x4877] |
| [ 0.328623] pci 0000:00:0a.0: supports D1 D2 |
| [ 0.328625] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.328648] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 |
| [ 0.328676] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.328694] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 |
| [ 0.328720] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.328742] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 |
| [ 0.328765] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 |
| [ 0.328783] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 |
| [ 0.328802] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 |
| [ 0.328842] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300 |
| [ 0.328856] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.328864] pci 0000:01:00.0: reg 14: [io 0x1000-0x10ff] |
| [ 0.328871] pci 0000:01:00.0: reg 18: [mem 0xf4320000-0xf432ffff] |
| [ 0.328892] pci 0000:01:00.0: reg 30: [mem 0xf4300000-0xf431ffff pref] |
| [ 0.328917] pci 0000:01:00.0: supports D1 D2 |
| [ 0.328947] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) |
| [ 0.332024] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.332027] pci 0000:00:09.0: bridge window [mem 0xf4300000-0xf43fffff] |
| [ 0.332031] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff pref] |
| [ 0.332035] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.332038] pci 0000:00:09.0: bridge window [io 0x0d00-0x4fff] (subtractive decode) |
| [ 0.332042] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff] (subtractive decode) |
| [ 0.332045] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf44fffff] (subtractive decode) |
| [ 0.332049] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.332071] pci 0000:00:0d.0: PCI bridge to [bus 02-02] |
| [ 0.336055] pci 0000:03:00.0: [1000:0056] type 0 class 0x000100 |
| [ 0.336065] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff] |
| [ 0.336076] pci 0000:03:00.0: reg 14: [mem 0xf4210000-0xf4213fff 64bit] |
| [ 0.336087] pci 0000:03:00.0: reg 1c: [mem 0xf4200000-0xf420ffff 64bit] |
| [ 0.336100] pci 0000:03:00.0: reg 30: [mem 0xf4000000-0xf41fffff pref] |
| [ 0.336133] pci 0000:03:00.0: supports D1 D2 |
| [ 0.336144] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.340028] pci 0000:00:0e.0: PCI bridge to [bus 03-03] |
| [ 0.344024] pci 0000:00:0e.0: bridge window [io 0x2000-0x2fff] |
| [ 0.344028] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xf42fffff] |
| [ 0.344040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| [ 0.344194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT] |
| [ 0.344292] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) |
| [ 0.357582] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.361724] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.365727] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 *18 19) |
| [ 0.372339] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19) |
| [ 0.377733] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.386046] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0 |
| [ 0.392340] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.397736] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 *23) |
| [ 0.404855] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 *23) |
| [ 0.409737] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.418638] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.426047] ACPI: PCI Interrupt Link [LSA0] (IRQs *20 21 22 23) |
| [ 0.432470] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 *21 22 23) |
| [ 0.437738] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 *22 23) |
| [ 0.445236] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.448031] vgaarb: loaded |
| [ 0.452029] vgaarb: bridge control possible 0000:01:00.0 |
| [ 0.456094] PCI: Using ACPI for IRQ routing |
| [ 0.460032] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.460089] reserve RAM buffer: 000000000009f800 - 000000000009ffff |
| [ 0.460093] reserve RAM buffer: 000000007ff9f000 - 000000007fffffff |
| [ 0.460263] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.464034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.469147] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.476121] Switching to clocksource hpet |
| [ 0.482590] pnp: PnP ACPI init |
| [ 0.485743] ACPI: bus type pnp registered |
| [ 0.491917] pnp 00:00: [bus 00-03] |
| [ 0.491920] pnp 00:00: [io 0x03b0-0x03df window] |
| [ 0.491923] pnp 00:00: [io 0x0d00-0x4fff window] |
| [ 0.491926] pnp 00:00: [mem 0xe0000000-0xefffffff window] |
| [ 0.491929] pnp 00:00: [mem 0xf4000000-0xf44fffff window] |
| [ 0.491934] pnp 00:00: [mem 0x000a0000-0x000bffff window] |
| [ 0.491937] pnp 00:00: [io 0x0cf8-0x0cff] |
| [ 0.491940] pnp 00:00: [io 0x0000-0x0cf7 window] |
| [ 0.491992] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) |
| [ 0.492221] pnp 00:01: [io 0x0060] |
| [ 0.492224] pnp 00:01: [io 0x0064] |
| [ 0.492237] pnp 00:01: [irq 1] |
| [ 0.492277] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| [ 0.492311] pnp 00:02: [irq 12] |
| [ 0.492348] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.492378] pnp 00:03: [io 0x0378-0x0387] |
| [ 0.492385] pnp 00:03: [irq 7] |
| [ 0.492422] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| [ 0.492451] pnp 00:04: [io 0x03f0-0x03f7] |
| [ 0.492458] pnp 00:04: [irq 6] |
| [ 0.492461] pnp 00:04: [dma 2] |
| [ 0.492499] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 0.492505] pnp: PnP ACPI: found 5 devices |
| [ 0.500185] ACPI: ACPI bus type pnp unregistered |
| [ 0.511855] PCI: max bus depth: 1 pci_try_num: 2 |
| [ 0.511885] pci 0000:00:09.0: PCI bridge to [bus 01-01] |
| [ 0.517166] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.523299] pci 0000:00:09.0: bridge window [mem 0xf4300000-0xf43fffff] |
| [ 0.530128] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff pref] |
| [ 0.537409] pci 0000:00:0d.0: PCI bridge to [bus 02-02] |
| [ 0.542679] pci 0000:00:0e.0: PCI bridge to [bus 03-03] |
| [ 0.547947] pci 0000:00:0e.0: bridge window [io 0x2000-0x2fff] |
| [ 0.554083] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xf42fffff] |
| [ 0.560921] pci 0000:00:09.0: setting latency timer to 64 |
| [ 0.560927] pci 0000:00:0d.0: setting latency timer to 64 |
| [ 0.560932] pci 0000:00:0e.0: setting latency timer to 64 |
| [ 0.560936] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.560939] pci_bus 0000:00: resource 5 [io 0x0d00-0x4fff] |
| [ 0.560942] pci_bus 0000:00: resource 6 [mem 0xe0000000-0xefffffff] |
| [ 0.560945] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xf44fffff] |
| [ 0.560948] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] |
| [ 0.560952] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.560955] pci_bus 0000:01: resource 1 [mem 0xf4300000-0xf43fffff] |
| [ 0.560958] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] |
| [ 0.560961] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| [ 0.560964] pci_bus 0000:01: resource 5 [io 0x0d00-0x4fff] |
| [ 0.560967] pci_bus 0000:01: resource 6 [mem 0xe0000000-0xefffffff] |
| [ 0.560970] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xf44fffff] |
| [ 0.560973] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff] |
| [ 0.560976] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.560979] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf42fffff] |
| [ 0.561047] NET: Registered protocol family 2 |
| [ 0.567564] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.575897] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) |
| [ 0.587202] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.594868] TCP: Hash tables configured (established 262144 bind 65536) |
| [ 0.601542] TCP reno registered |
| [ 0.604732] UDP hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.610812] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.617454] NET: Registered protocol family 1 |
| [ 0.622103] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23 |
| [ 0.628076] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22 |
| [ 0.633927] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.639488] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.645048] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.650580] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 0.656198] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.661760] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.667290] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 0.672907] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 0.678445] pci 0000:01:00.0: Boot video device |
| [ 0.678451] PCI: CLS 64 bytes, default 64 |
| [ 0.678528] Unpacking initramfs... |
| [ 1.010425] Freeing initrd memory: 11060k freed |
| [ 1.025547] agpgart-amd64 0000:01:00.0: AGP bridge [1002/5961] |
| [ 1.031441] agpgart-amd64 0000:01:00.0: aperture size 4096 MB is not right, using settings from NB |
| [ 1.042566] agpgart-amd64 0000:01:00.0: AGP aperture is 64M @ 0xf0000000 |
| [ 1.049393] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.057460] audit: initializing netlink socket (disabled) |
| [ 1.062920] type=2000 audit(1445882675.060:1): initialized |
| [ 1.085834] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.092775] VFS: Disk quotas dquot_6.5.2 |
| [ 1.096789] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.103364] msgmni has been set to 4021 |
| [ 1.107434] alg: No test for stdrng (krng) |
| [ 1.111614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| [ 1.119073] io scheduler noop registered |
| [ 1.123043] io scheduler deadline registered |
| [ 1.127371] io scheduler cfq registered (default) |
| [ 1.132311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.137964] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.144620] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 1.151351] ERST: Table is not found! |
| [ 1.155057] GHES: HEST is not enabled! |
| [ 1.158942] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.185538] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| [ 1.211878] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| [ 1.218285] Linux agpgart interface v0.103 |
| [ 1.222550] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.232913] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.237925] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.243148] mousedev: PS/2 mouse device common for all mice |
| [ 1.248868] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.253919] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.260347] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.267109] cpuidle: using governor ladder |
| [ 1.271248] cpuidle: using governor menu |
| [ 1.275466] TCP cubic registered |
| [ 1.278783] NET: Registered protocol family 10 |
| [ 1.283837] Mobile IPv6 |
| [ 1.286338] NET: Registered protocol family 17 |
| [ 1.290837] Registering the dns_resolver key type |
| [ 1.295759] PM: Hibernation image not present or could not be loaded. |
| [ 1.295776] registered taskstats version 1 |
| [ 1.300206] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.309144] rtc_cmos rtc_cmos: setting system clock to 2015-10-26 18:04:36 UTC (1445882676) |
| [ 1.317673] Initializing network drop monitor service |
| [ 1.324265] Freeing unused kernel memory: 580k freed |
| [ 1.329735] Write protecting the kernel read-only data: 6144k |
| [ 1.338898] Freeing unused kernel memory: 644k freed |
| [ 1.347964] Freeing unused kernel memory: 688k freed |
| [ 1.376307] udevd[44]: starting version 175 |
| [ 1.445676] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. |
| [ 1.463936] Fusion MPT base driver 3.04.20 |
| [ 1.468125] Copyright (c) 1999-2008 LSI Corporation |
| [ 1.476653] usbcore: registered new interface driver usbfs |
| [ 1.495176] SCSI subsystem initialized |
| [ 1.511621] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21 |
| [ 1.534024] usbcore: registered new interface driver hub |
| [ 1.541104] libata version 3.00 loaded. |
| [ 1.554777] forcedeth 0000:00:0a.0: setting latency timer to 64 |
| [ 1.558841] FDC 0 is a post-1991 82077 |
| [ 1.565079] usbcore: registered new device driver usb |
| [ 1.570519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.579909] Fusion MPT SAS Host driver 3.04.20 |
| [ 1.601300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.611791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 |
| [ 1.622072] mptbase: ioc0: Initiating bringup |
| [ 2.056044] Refined TSC clocksource calibration: 2010.302 MHz. |
| [ 2.061923] Switching to clocksource tsc |
| [ 2.076738] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:16:e4:55 |
| [ 2.085158] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 |
| [ 2.092845] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.093001] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 |
| [ 2.098919] sata_nv 0000:00:07.0: setting latency timer to 64 |
| [ 2.099442] scsi0 : sata_nv |
| [ 2.102484] scsi1 : sata_nv |
| [ 2.105436] ata1: SATA max UDMA/133 cmd 0x4850 ctl 0x4878 bmdma 0x4830 irq 20 |
| [ 2.112622] ata2: SATA max UDMA/133 cmd 0x4858 ctl 0x487c bmdma 0x4838 irq 20 |
| [ 2.120019] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21 |
| [ 2.125929] sata_nv 0000:00:08.0: setting latency timer to 64 |
| [ 2.126449] scsi2 : sata_nv |
| [ 2.129449] scsi3 : sata_nv |
| [ 2.132402] ata3: SATA max UDMA/133 cmd 0x4860 ctl 0x4880 bmdma 0x4840 irq 21 |
| [ 2.139579] ata4: SATA max UDMA/133 cmd 0x4868 ctl 0x4884 bmdma 0x4848 irq 21 |
| [ 2.147240] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.147297] pata_amd 0000:00:06.0: setting latency timer to 64 |
| [ 2.147934] scsi4 : pata_amd |
| [ 2.151115] scsi5 : pata_amd |
| [ 2.154179] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4820 irq 14 |
| [ 2.161192] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4828 irq 15 |
| [ 2.168531] ehci_hcd 0000:00:02.1: setting latency timer to 64 |
| [ 2.168535] ehci_hcd 0000:00:02.1: EHCI Host Controller |
| [ 2.174007] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.181498] ehci_hcd 0000:00:02.1: debug port 1 |
| [ 2.186078] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.186106] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf4405000 |
| [ 2.200005] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.205821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.212647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.219925] usb usb1: Product: EHCI Host Controller |
| [ 2.224839] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd |
| [ 2.230887] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.235547] ioc0: LSISAS1064E B3: Capabilities={Initiator} |
| [ 2.241508] hub 1-0:1.0: USB hub found |
| [ 2.245319] hub 1-0:1.0: 10 ports detected |
| [ 2.249837] mptsas 0000:03:00.0: setting latency timer to 64 |
| [ 2.250250] ohci_hcd 0000:00:02.0: setting latency timer to 64 |
| [ 2.250254] ohci_hcd 0000:00:02.0: OHCI Host Controller |
| [ 2.255589] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.263086] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf4400000 |
| [ 2.326019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.332855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.340131] usb usb2: Product: OHCI Host Controller |
| [ 2.345045] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd |
| [ 2.351096] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.356187] hub 2-0:1.0: USB hub found |
| [ 2.359978] hub 2-0:1.0: 10 ports detected |
| [ 2.365596] ata5.00: HPA detected: current 156250000, native 156301488 |
| [ 2.372192] ata5.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100 |
| [ 2.378761] ata5.00: 156250000 sectors, multi 0: LBA |
| [ 2.383861] ata5: nv_mode_filter: 0x3f39f&0xfffff->0x3f39f, BIOS=0x0 (0x0) ACPI=0x0 |
| [ 2.397045] ata5.00: configured for UDMA/100 |
| [ 2.464036] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.469530] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.780007] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.096008] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.101589] scsi 4:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5 |
| [ 3.291622] sd 4:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) |
| [ 3.299676] sd 4:0:0:0: [sda] Write Protect is off |
| [ 3.304559] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.304586] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.336256] sda: sda1 sda2 |
| [ 3.339548] sd 4:0:0:0: [sda] Attached SCSI disk |
| [ 3.347135] sd 4:0:0:0: Attached scsi generic sg0 type 0 |
| [ 12.585896] scsi6 : ioc0: LSISAS1064E B3, FwRev=01210000h, Ports=1, MaxQ=483, IRQ=18 |
| [ 12.627274] microcode: CPU0: family 15 not supported |
| [ 12.634563] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 12.717497] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) |
| [ 14.434921] udevd[299]: starting version 175 |
| [ 14.813043] input: PC Speaker as /devices/platform/pcspkr/input/input1 |
| [ 15.090452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 15.114281] ACPI: Power Button [PWRF] |
| [ 15.122011] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) |
| [ 15.133614] powernow-k8: fid 0xc (2000 MHz), vid 0x4 |
| [ 15.138654] powernow-k8: fid 0xa (1800 MHz), vid 0x8 |
| [ 15.143752] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 15.148858] powernow-k8: failing init, change pending bit set |
| [ 15.194971] i2c i2c-0: nForce2 SMBus adapter at 0x4480 |
| [ 15.200385] i2c i2c-1: nForce2 SMBus adapter at 0x44c0 |
| [ 15.216858] EDAC MC: Ver: 2.1.0 |
| [ 15.246345] MCE: In-kernel MCE decoding enabled. |
| [ 15.278867] AMD64 EDAC driver v3.4.0 |
| [ 15.282569] EDAC amd64: DRAM ECC disabled. |
| [ 15.286713] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| [ 15.286715] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| [ 15.286717] (Note that use of the override may cause unknown side effects.) |
| [ 15.424645] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23 |
| [ 15.430500] snd_intel8x0 0000:00:04.0: setting latency timer to 64 |
| [ 15.581832] parport_pc 00:03: reported by Plug and Play ACPI |
| [ 15.587604] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] |
| [ 15.760019] intel8x0_measure_ac97_clock: measured 54218 usecs (2664 samples) |
| [ 15.767127] intel8x0: clocking to 46892 |
| [ 17.576776] Adding 8387580k swap on /dev/sda1. Priority:-1 extents:1 across:8387580k |
| [ 17.607271] EXT4-fs (sda2): re-mounted. Opts: (null) |
| [ 17.876657] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro |
| [ 18.032675] loop: module loaded |
| [ 18.137335] w83627hf: w83627hf: Found W83627THF chip at 0x290 |
| [ 19.365612] NET: Registered protocol family 8 |
| [ 19.370041] NET: Registered protocol family 20 |
| [ 22.340893] Bluetooth: Core ver 2.16 |
| [ 22.344802] NET: Registered protocol family 31 |
| [ 22.349305] Bluetooth: HCI device and connection manager initialized |
| [ 22.355702] Bluetooth: HCI socket layer initialized |
| [ 22.360619] Bluetooth: L2CAP socket layer initialized |
| [ 22.366090] Bluetooth: SCO socket layer initialized |
| [ 22.467676] Bluetooth: RFCOMM TTY layer initialized |
| [ 22.473037] Bluetooth: RFCOMM socket layer initialized |
| [ 22.478249] Bluetooth: RFCOMM ver 1.11 |
| [ 22.484955] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 22.490361] Bluetooth: BNEP filters: protocol multicast |
| [ 22.641567] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) |
| [ 22.650580] powernow-k8: fid 0xc (2000 MHz), vid 0x4 |
| [ 22.655600] powernow-k8: fid 0xa (1800 MHz), vid 0x8 |
| [ 22.660608] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 22.665704] powernow-k8: failing init, change pending bit set |