| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.13.0-39-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:31:23 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8) |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] NSC Geode by NSC |
| [ 0.000000] Cyrix CyrixInstead |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] Transmeta GenuineTMx86 |
| [ 0.000000] Transmeta TransmetaCPU |
| [ 0.000000] UMC UMC UMC UMC |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee2fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000acee3000-0x00000000af9fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Hewlett-Packard Butterfly/Butterfly, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x1000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable |
| [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable |
| [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable |
| [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] |
| [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| [ 0.000000] reserving inaccessible SNB gfx pages |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] |
| [ 0.000000] [mem 0x37800000-0x379fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] |
| [ 0.000000] [mem 0x34000000-0x377fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x20200000-0x33ffffff] |
| [ 0.000000] [mem 0x20200000-0x33ffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] |
| [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k |
| [ 0.000000] BRK [0x01b93000, 0x01b93fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35bf6000-0x36df2fff] |
| [ 0.000000] ACPI: RSDP 000f6dd0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT acfef0e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP acff2620 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) |
| [ 0.000000] ACPI: DSDT acfef250 0033CA (v02 COREv4 COREBOOT 20110725 INTL 20140114) |
| [ 0.000000] ACPI: FACS acfef210 000040 |
| [ 0.000000] ACPI: HPET acff2720 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC acff2760 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: MCFG acff27c0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT acff3800 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] 4474MB HIGHMEM available. |
| [ 0.000000] 891MB LOWMEM available. |
| [ 0.000000] mapped low ram: 0 - 37bfe000 |
| [ 0.000000] low ram: 0 - 37bfe000 |
| [ 0.000000] BRK [0x01b94000, 0x01b94fff] PGTABLE |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] |
| [ 0.000000] HighMem [mem 0x37bfe000-0x4f5fffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] |
| [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] |
| [ 0.000000] node 0: [mem 0x40200000-0xacee2fff] |
| [ 0.000000] node 0: [mem 0x00000000-0x4f5fffff] |
| [ 0.000000] On node 0 totalpages: 1032321 |
| [ 0.000000] free_area_init_node: node 0, pgdat c199b4c0, node_mem_map f3206020 |
| [ 0.000000] DMA zone: 32 pages used for memmap |
| [ 0.000000] DMA zone: 0 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] Normal zone: 1752 pages used for memmap |
| [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 |
| [ 0.000000] HighMem zone: 8949 pages used for memmap |
| [ 0.000000] HighMem zone: 804581 pages, LIFO batch:31 |
| [ 0.000000] Using APIC driver default |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd0000 s36096 r0 d21248 u57344 |
| [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030537 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=98c5d54c-44fe-432a-ae46-300c1e1d8f00 ro quiet splash vt.handoff=7 |
| [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.000000] Initializing CPU#0 |
| [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 |
| [ 0.000000] allocated 10989560 bytes of page_cgroup |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| [ 0.000000] Initializing HighMem for node 0 (00037bfe:0014f600) |
| [ 0.000000] Memory: 4043712K/4129284K available (6539K kernel code, 640K rwdata, 2764K rodata, 872K init, 924K bss, 85572K reserved, 3218324K highmem) |
| [ 0.000000] virtual kernel memory layout: |
| [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) |
| [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) |
| [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) |
| [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) |
| [ 0.000000] .init : 0xc19b9000 - 0xc1a93000 ( 872 kB) |
| [ 0.000000] .data : 0xc16631f2 - 0xc19b8280 (3412 kB) |
| [ 0.000000] .text : 0xc1000000 - 0xc16631f2 (6540 kB) |
| [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. |
| [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 |
| [ 0.000000] CPU 0 irqstacks, hard=f2c08000 soft=f2c0a000 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 1097.525 MHz processor |
| [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.05 BogoMIPS (lpj=4390100) |
| [ 0.000007] pid_max: default: 32768 minimum: 301 |
| [ 0.000055] Security Framework initialized |
| [ 0.000077] AppArmor: AppArmor initialized |
| [ 0.000079] Yama: becoming mindful. |
| [ 0.000153] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.000157] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.000491] Initializing cgroup subsys memory |
| [ 0.000499] Initializing cgroup subsys devices |
| [ 0.000503] Initializing cgroup subsys freezer |
| [ 0.000506] Initializing cgroup subsys blkio |
| [ 0.000509] Initializing cgroup subsys perf_event |
| [ 0.000513] Initializing cgroup subsys hugetlb |
| [ 0.000557] CPU: Physical Processor ID: 0 |
| [ 0.000560] CPU: Processor Core ID: 0 |
| [ 0.000570] mce: CPU supports 7 MCE banks |
| [ 0.000591] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.000613] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 |
| [ 0.000613] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 |
| [ 0.000613] tlb_flushall_shift: 5 |
| [ 0.001330] Freeing SMP alternatives memory: 32K (c1a93000 - c1a9b000) |
| [ 0.003569] ACPI: Core revision 20131115 |
| [ 0.008467] ACPI: All ACPI Tables successfully acquired |
| [ 0.008510] ftrace: allocating 27830 entries in 55 pages |
| [ 0.036163] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.036609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.076296] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07) |
| [ 0.076310] TSC deadline timer enabled |
| [ 0.076331] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. |
| [ 0.076347] ... version: 3 |
| [ 0.076349] ... bit width: 48 |
| [ 0.076351] ... generic registers: 8 |
| [ 0.076354] ... value mask: 0000ffffffffffff |
| [ 0.076356] ... max period: 0000ffffffffffff |
| [ 0.076359] ... fixed-purpose events: 3 |
| [ 0.076361] ... event mask: 00000007000000ff |
| [ 0.079462] CPU 1 irqstacks, hard=f2cf8000 soft=f2cfa000 |
| [ 0.079466] x86: Booting SMP configuration: |
| [ 0.089734] Initializing CPU#1 |
| [ 0.079469] .... node #0, CPUs: #1 |
| [ 0.092572] x86: Booted up 1 node, 2 CPUs |
| [ 0.092579] smpboot: Total of 2 processors activated (4390.10 BogoMIPS) |
| [ 0.092678] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.095045] devtmpfs: initialized |
| [ 0.095425] EVM: security.selinux |
| [ 0.095428] EVM: security.SMACK64 |
| [ 0.095431] EVM: security.ima |
| [ 0.095433] EVM: security.capability |
| [ 0.097433] pinctrl core: initialized pinctrl subsystem |
| [ 0.097563] regulator-dummy: no parameters |
| [ 0.097607] RTC time: 10:54:45, date: 11/14/14 |
| [ 0.097681] NET: Registered protocol family 16 |
| [ 0.097956] EISA bus registered |
| [ 0.097959] cpuidle: using governor ladder |
| [ 0.097962] cpuidle: using governor menu |
| [ 0.098103] ACPI: bus type PCI registered |
| [ 0.098107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.098223] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.098228] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.098230] PCI: Using MMCONFIG for extended config space |
| [ 0.098233] PCI: Using configuration type 1 for base access |
| [ 0.100166] bio: create slab <bio-0> at 0 |
| [ 0.100448] ACPI: Added _OSI(Module Device) |
| [ 0.100453] ACPI: Added _OSI(Processor Device) |
| [ 0.100456] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.100459] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.108873] ACPI: Interpreter enabled |
| [ 0.108901] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) |
| [ 0.108911] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) |
| [ 0.108942] ACPI: (supports S0 S3 S4 S5) |
| [ 0.108944] ACPI: Using IOAPIC for interrupt routing |
| [ 0.108991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.109205] ACPI: No dock devices found. |
| [ 0.117677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.117688] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.117796] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.118004] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) |
| [ 0.118015] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.118316] PCI host bridge to bus 0000:00 |
| [ 0.118322] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.118327] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.118331] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.118335] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.118339] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| [ 0.118342] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| [ 0.118346] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| [ 0.118350] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| [ 0.118354] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| [ 0.118357] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| [ 0.118361] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| [ 0.118365] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| [ 0.118369] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| [ 0.118373] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| [ 0.118377] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| [ 0.118380] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| [ 0.118384] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff] |
| [ 0.118388] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| [ 0.118404] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| [ 0.118576] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000 |
| [ 0.118601] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.118615] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.118625] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] |
| [ 0.118867] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.118972] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit] |
| [ 0.119375] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.119570] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.119612] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff] |
| [ 0.119787] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.119875] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.119950] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.119986] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit] |
| [ 0.120141] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.120231] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.120294] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.120455] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.120611] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.120771] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.120920] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.121079] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.121243] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.121284] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff] |
| [ 0.121458] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.121545] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.121611] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100 |
| [ 0.121925] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.121969] pci 0000:00:1f.2: reg 0x10: [io 0x2060-0x2067] |
| [ 0.121988] pci 0000:00:1f.2: reg 0x14: [io 0x2070-0x2073] |
| [ 0.122007] pci 0000:00:1f.2: reg 0x18: [io 0x2068-0x206f] |
| [ 0.122026] pci 0000:00:1f.2: reg 0x1c: [io 0x2074-0x2077] |
| [ 0.122044] pci 0000:00:1f.2: reg 0x20: [io 0x2040-0x205f] |
| [ 0.122063] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff] |
| [ 0.122173] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.122309] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.122344] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit] |
| [ 0.122392] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.122558] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.122599] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit] |
| [ 0.122988] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.123056] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit] |
| [ 0.123212] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref] |
| [ 0.123376] pci 0000:01:00.0: supports D1 D2 |
| [ 0.123379] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.128610] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.128626] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.128797] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 |
| [ 0.128829] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.128884] pci 0000:02:00.0: reg 0x18: [mem 0xe0504000-0xe0504fff 64bit pref] |
| [ 0.128919] pci 0000:02:00.0: reg 0x20: [mem 0xe0500000-0xe0503fff 64bit pref] |
| [ 0.129061] pci 0000:02:00.0: supports D1 D2 |
| [ 0.129064] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.136610] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.136621] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.136641] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref] |
| [ 0.136857] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 |
| [ 0.136939] pci 0000:03:00.0: reg 0x10: [mem 0xe0600000-0xe0600fff] |
| [ 0.137534] pci 0000:03:00.0: supports D1 D2 |
| [ 0.137538] pci 0000:03:00.0: PME# supported from D1 D2 D3hot |
| [ 0.144642] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.144657] pci 0000:00:1c.2: bridge window [mem 0xe0600000-0xe06fffff] |
| [ 0.144731] pci_bus 0000:00: on NUMA node 0 |
| [ 0.145064] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.145172] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled. |
| [ 0.145274] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.145374] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. |
| [ 0.145473] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.145572] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.145671] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.145769] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.146603] ACPI: \_SB_.PCI0: notify handler is installed |
| [ 0.146673] Found 1 acpi root devices |
| [ 0.146742] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 |
| [ 0.146924] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.146932] vgaarb: loaded |
| [ 0.146934] vgaarb: bridge control possible 0000:00:02.0 |
| [ 0.147299] SCSI subsystem initialized |
| [ 0.147383] libata version 3.00 loaded. |
| [ 0.147425] ACPI: bus type USB registered |
| [ 0.147457] usbcore: registered new interface driver usbfs |
| [ 0.147472] usbcore: registered new interface driver hub |
| [ 0.147519] usbcore: registered new device driver usb |
| [ 0.147706] PCI: Using ACPI for IRQ routing |
| [ 0.151484] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.151598] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.151602] e820: reserve RAM buffer [mem 0xacee3000-0xafffffff] |
| [ 0.151606] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff] |
| [ 0.151757] NetLabel: Initializing |
| [ 0.151760] NetLabel: domain hash size = 128 |
| [ 0.151762] NetLabel: protocols = UNLABELED CIPSOv4 |
| [ 0.151783] NetLabel: unlabeled traffic allowed by default |
| [ 0.151980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.151992] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.154046] Switched to clocksource hpet |
| [ 0.166039] AppArmor: AppArmor Filesystem Enabled |
| [ 0.166101] pnp: PnP ACPI init |
| [ 0.166123] ACPI: bus type PNP registered |
| [ 0.166226] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active) |
| [ 0.166339] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.166344] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.166349] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.166353] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.166359] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.166363] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.166370] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.166375] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.166379] system 00:01: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.166383] system 00:01: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.166389] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.166989] pnp 00:02: [dma 4] |
| [ 0.167033] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) |
| [ 0.167085] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) |
| [ 0.167265] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.167272] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.167335] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) |
| [ 0.167413] system 00:06: [io 0x0500-0x057f] could not be reserved |
| [ 0.167418] system 00:06: [io 0x0480-0x04bf] has been reserved |
| [ 0.167423] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.167476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.167551] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.167594] pnp: PnP ACPI: found 9 devices |
| [ 0.167596] ACPI: bus type PNP unregistered |
| [ 0.167601] PnPBIOS: Disabled by ACPI PNP |
| [ 0.205410] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.205422] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.205439] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.205445] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.205461] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref] |
| [ 0.205473] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.205483] pci 0000:00:1c.2: bridge window [mem 0xe0600000-0xe06fffff] |
| [ 0.205501] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.205506] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.205510] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.205514] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| [ 0.205518] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| [ 0.205521] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| [ 0.205525] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] |
| [ 0.205529] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] |
| [ 0.205533] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] |
| [ 0.205537] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] |
| [ 0.205541] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] |
| [ 0.205545] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] |
| [ 0.205549] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] |
| [ 0.205552] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] |
| [ 0.205556] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff] |
| [ 0.205560] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff] |
| [ 0.205564] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff] |
| [ 0.205569] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] |
| [ 0.205573] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] |
| [ 0.205577] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref] |
| [ 0.205582] pci_bus 0000:03: resource 1 [mem 0xe0600000-0xe06fffff] |
| [ 0.205637] NET: Registered protocol family 2 |
| [ 0.205988] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.206010] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.206039] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.206073] TCP: reno registered |
| [ 0.206078] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.206087] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.206170] NET: Registered protocol family 1 |
| [ 0.206193] pci 0000:00:02.0: Boot video device |
| [ 0.206774] PCI: CLS 64 bytes, default 64 |
| [ 0.206850] Trying to unpack rootfs image as initramfs... |
| [ 0.906811] Freeing initrd memory: 18420K (f5bf6000 - f6df3000) |
| [ 0.907193] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 |
| [ 0.907207] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 |
| [ 0.907294] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.907297] Scanning for low memory corruption every 60 seconds |
| [ 0.907759] Initialise system trusted keyring |
| [ 0.907829] audit: initializing netlink socket (disabled) |
| [ 0.907844] type=2000 audit(1415962485.896:1): initialized |
| [ 0.953562] bounce pool size: 64 pages |
| [ 0.953581] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.955912] zbud: loaded |
| [ 0.956018] VFS: Disk quotas dquot_6.5.2 |
| [ 0.956106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.956894] fuse init (API version 7.22) |
| [ 0.957045] msgmni has been set to 1648 |
| [ 0.957156] Key type big_key registered |
| [ 0.957727] Key type asymmetric registered |
| [ 0.957731] Asymmetric key parser 'x509' registered |
| [ 0.957790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.957840] io scheduler noop registered |
| [ 0.957844] io scheduler deadline registered (default) |
| [ 0.957892] io scheduler cfq registered |
| [ 0.958254] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X |
| [ 0.958534] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X |
| [ 0.958797] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X |
| [ 0.958965] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.958969] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.958977] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| [ 0.959013] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| [ 0.959017] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.959025] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| [ 0.959060] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt |
| [ 0.959063] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.959071] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded |
| [ 0.959094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.959121] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.959193] vesafb: mode is 1366x768x32, linelength=5504, pages=0 |
| [ 0.959195] vesafb: scrolling: redraw |
| [ 0.959199] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.959628] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 4160k, total 4160k |
| [ 0.967501] Console: switching to colour frame buffer device 170x48 |
| [ 0.975091] fb0: VESA VGA frame buffer device |
| [ 0.975122] intel_idle: MWAIT substates: 0x21120 |
| [ 0.975125] intel_idle: v0.4 model 0x2A |
| [ 0.975127] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.975260] ipmi message handler version 39.2 |
| [ 0.975562] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared |
| [ 0.975882] ACPI: AC Adapter [AC] (on-line) |
| [ 0.976065] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 |
| [ 0.976434] ACPI: Lid Switch [LID0] |
| [ 0.976511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 |
| [ 0.976519] ACPI: Power Button [PWRB] |
| [ 0.976580] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 |
| [ 0.976585] ACPI: Sleep Button [TPAD] |
| [ 0.976662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 0.976666] ACPI: Power Button [PWRF] |
| [ 0.978519] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.978526] ACPI: Thermal Zone [THRM] (0 C) |
| [ 0.978571] GHES: HEST is not enabled! |
| [ 0.978718] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| [ 0.978768] isapnp: Scanning for PnP cards... |
| [ 0.988770] Linux agpgart interface v0.103 |
| [ 0.992846] brd: module loaded |
| [ 0.995371] loop: module loaded |
| [ 0.996753] libphy: Fixed MDIO Bus: probed |
| [ 0.997091] tun: Universal TUN/TAP device driver, 1.6 |
| [ 0.997094] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 0.997200] PPP generic driver version 2.4.2 |
| [ 0.997328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.997334] ehci-pci: EHCI PCI platform driver |
| [ 0.997597] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared |
| [ 0.997607] ACPI: Battery Slot [BATX] (battery present) |
| [ 0.997722] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.997731] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.997753] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.001663] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.001699] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800 |
| [ 1.010075] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.010177] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.010182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.010186] usb usb1: Product: EHCI Host Controller |
| [ 1.010190] usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd |
| [ 1.010193] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.010384] hub 1-0:1.0: USB hub found |
| [ 1.010396] hub 1-0:1.0: 3 ports detected |
| [ 1.010804] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.010814] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.010835] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.014755] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.014788] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00 |
| [ 1.026069] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.026170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.026175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.026179] usb usb2: Product: EHCI Host Controller |
| [ 1.026183] usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd |
| [ 1.026186] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.026370] hub 2-0:1.0: USB hub found |
| [ 1.026384] hub 2-0:1.0: 3 ports detected |
| [ 1.026623] ehci-platform: EHCI generic platform driver |
| [ 1.026638] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.026640] ohci-pci: OHCI PCI platform driver |
| [ 1.026657] ohci-platform: OHCI generic platform driver |
| [ 1.026669] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 1.026781] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 |
| [ 1.026784] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp |
| [ 1.032585] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.032733] mousedev: PS/2 mouse device common for all mice |
| [ 1.032981] rtc_cmos 00:07: RTC can wake from S4 |
| [ 1.033155] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 |
| [ 1.033193] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.033331] device-mapper: uevent: version 1.0.3 |
| [ 1.033451] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| [ 1.033482] platform eisa.0: Probing EISA bus 0 |
| [ 1.033487] platform eisa.0: EISA: Cannot allocate resource for mainboard |
| [ 1.033491] platform eisa.0: Cannot allocate resource for EISA slot 1 |
| [ 1.033494] platform eisa.0: Cannot allocate resource for EISA slot 2 |
| [ 1.033498] platform eisa.0: Cannot allocate resource for EISA slot 3 |
| [ 1.033502] platform eisa.0: Cannot allocate resource for EISA slot 4 |
| [ 1.033505] platform eisa.0: Cannot allocate resource for EISA slot 5 |
| [ 1.033509] platform eisa.0: Cannot allocate resource for EISA slot 6 |
| [ 1.033512] platform eisa.0: Cannot allocate resource for EISA slot 7 |
| [ 1.033516] platform eisa.0: Cannot allocate resource for EISA slot 8 |
| [ 1.033520] platform eisa.0: EISA: Detected 0 cards |
| [ 1.033529] cpufreq-nforce2: No nForce2 chipset. |
| [ 1.033534] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.033765] TCP: cubic registered |
| [ 1.033930] NET: Registered protocol family 10 |
| [ 1.034281] NET: Registered protocol family 17 |
| [ 1.034298] Key type dns_resolver registered |
| [ 1.034579] Using IPI No-Shortcut mode |
| [ 1.034695] Loading compiled-in X.509 certificates |
| [ 1.041872] Loaded X.509 cert 'Magrathea: Glacier signing key: a69631ee8432bd22004ba4daa978cfd92cd55e69' |
| [ 1.041891] registered taskstats version 1 |
| [ 1.045742] Key type trusted registered |
| [ 1.049333] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| [ 1.049428] Key type encrypted registered |
| [ 1.052815] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.052821] IMA: No TPM chip found, activating TPM-bypass! |
| [ 1.053370] regulator-dummy: disabling |
| [ 1.053440] Magic number: 6:34:932 |
| [ 1.053532] rtc_cmos 00:07: setting system clock to 2014-11-14 10:54:46 UTC (1415962486) |
| [ 1.053797] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| [ 1.053800] EDD information not available. |
| [ 1.053860] PM: Hibernation image not present or could not be loaded. |
| [ 1.289665] isapnp: No Plug & Play device found |
| [ 1.290183] Freeing unused kernel memory: 872K (c19b9000 - c1a93000) |
| [ 1.290332] Write protecting the kernel text: 6544k |
| [ 1.290490] Write protecting the kernel read-only data: 2768k |
| [ 1.290492] NX-protecting the kernel data: 5744k |
| [ 1.315201] systemd-udevd[95]: starting version 204 |
| [ 1.322084] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.368416] ahci 0000:00:1f.2: version 3.0 |
| [ 1.368647] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X |
| [ 1.368703] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.368737] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode |
| [ 1.368742] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.369456] scsi0 : ahci |
| [ 1.369587] scsi1 : ahci |
| [ 1.369696] scsi2 : ahci |
| [ 1.369799] scsi3 : ahci |
| [ 1.369874] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 43 |
| [ 1.369877] ata2: DUMMY |
| [ 1.369880] ata3: DUMMY |
| [ 1.369882] ata4: DUMMY |
| [ 1.407681] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 1.408396] r8169 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 1.408692] r8169 0000:02:00.0 eth0: RTL8105e at 0xf841e000, a0:00:ba:d0:0b:ad, XID 00c00000 IRQ 44 |
| [ 1.410614] rtsx_pci 0000:03:00.0: irq 45 for MSI/MSI-X |
| [ 1.410659] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45 |
| [ 1.454546] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.454557] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.455108] hub 1-1:1.0: USB hub found |
| [ 1.455250] hub 1-1:1.0: 4 ports detected |
| [ 1.566203] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.686079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.686804] ata1.00: ATA-8: OCZ CORE_SSD, 02.10104, max UDMA/100 |
| [ 1.686815] ata1.00: 125206528 sectors, multi 0: LBA |
| [ 1.687589] ata1.00: configured for UDMA/100 |
| [ 1.687988] scsi 0:0:0:0: Direct-Access ATA OCZ CORE_SSD 02.1 PQ: 0 ANSI: 5 |
| [ 1.688350] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.688357] sd 0:0:0:0: [sda] 125206528 512-byte logical blocks: (64.1 GB/59.7 GiB) |
| [ 1.688500] sd 0:0:0:0: [sda] Write Protect is off |
| [ 1.688508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.688569] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.698629] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.698637] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.699109] hub 2-1:1.0: USB hub found |
| [ 1.699278] hub 2-1:1.0: 4 ports detected |
| [ 1.770345] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 1.864997] usb 1-1.3: string descriptor 0 read error: -22 |
| [ 1.865009] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=311e |
| [ 1.865013] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.906072] tsc: Refined TSC clocksource calibration: 1097.506 MHz |
| [ 1.970295] usb 2-1.3: new high-speed USB device number 3 using ehci-pci |
| [ 2.157216] usb 2-1.3: New USB device found, idVendor=04f2, idProduct=b35f |
| [ 2.157235] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 |
| [ 2.157240] usb 2-1.3: Product: HP Truevision HD |
| [ 2.157244] usb 2-1.3: Manufacturer: Chicony Electronics Co.,Ltd. |
| [ 2.157247] usb 2-1.3: SerialNumber: 0x0001 |
| [ 2.648064] sda: sda1 sda2 < sda5 > |
| [ 2.649001] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.728575] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.877416] random: init urandom read with 30 bits of entropy available |
| [ 2.906160] Switched to clocksource tsc |
| [ 2.924675] init: plymouth-upstart-bridge main process (152) terminated with status 1 |
| [ 2.924699] init: plymouth-upstart-bridge main process ended, respawning |
| [ 2.936588] init: plymouth-upstart-bridge main process (163) terminated with status 1 |
| [ 2.936614] init: plymouth-upstart-bridge main process ended, respawning |
| [ 2.951324] init: plymouth-upstart-bridge main process (166) terminated with status 1 |
| [ 2.951349] init: plymouth-upstart-bridge main process ended, respawning |
| [ 3.155386] Adding 4127740k swap on /dev/sda5. Priority:-1 extents:1 across:4127740k FS |
| [ 3.210644] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 3.363452] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.537407] systemd-udevd[348]: starting version 204 |
| [ 3.734048] lp: driver loaded but no devices found |
| [ 3.753278] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.754350] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 |
| [ 3.767978] ppdev: user-space parallel port driver |
| [ 3.892578] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X |
| [ 4.019200] cfg80211: Calling CRDA to update world regulatory domain |
| [ 4.081422] Bluetooth: Core ver 2.17 |
| [ 4.081455] NET: Registered protocol family 31 |
| [ 4.081458] Bluetooth: HCI device and connection manager initialized |
| [ 4.081468] Bluetooth: HCI socket layer initialized |
| [ 4.081473] Bluetooth: L2CAP socket layer initialized |
| [ 4.081481] Bluetooth: SCO socket layer initialized |
| [ 4.324390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 4.324396] Bluetooth: BNEP filters: protocol multicast |
| [ 4.324408] Bluetooth: BNEP socket layer initialized |
| [ 4.325379] usbcore: registered new interface driver btusb |
| [ 4.355362] Bluetooth: RFCOMM TTY layer initialized |
| [ 4.355378] Bluetooth: RFCOMM socket layer initialized |
| [ 4.355388] Bluetooth: RFCOMM ver 1.11 |
| [ 4.368996] [drm] Initialized drm 1.1.0 20060810 |
| [ 4.463541] type=1400 audit(1415962489.908:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=501 comm="apparmor_parser" |
| [ 4.463555] type=1400 audit(1415962489.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=501 comm="apparmor_parser" |
| [ 4.480165] type=1400 audit(1415962489.924:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=501 comm="apparmor_parser" |
| [ 4.504529] Linux video capture interface: v2.00 |
| [ 4.527628] type=1400 audit(1415962489.972:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=516 comm="apparmor_parser" |
| [ 4.527643] type=1400 audit(1415962489.972:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser" |
| [ 4.527652] type=1400 audit(1415962489.972:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser" |
| [ 4.528718] type=1400 audit(1415962489.972:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser" |
| [ 4.528729] type=1400 audit(1415962489.972:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser" |
| [ 4.529279] type=1400 audit(1415962489.972:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser" |
| [ 4.620113] usb 1-1.3: USB disconnect, device number 3 |
| [ 4.620310] usbcore: registered new interface driver ath3k |
| [ 4.626658] init: cups main process (517) killed by HUP signal |
| [ 4.626684] init: cups main process ended, respawning |
| [ 4.818010] usb 1-1.3: new full-speed USB device number 4 using ehci-pci |
| [ 4.841367] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b35f) |
| [ 4.866269] input: HP Truevision HD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input6 |
| [ 4.866462] usbcore: registered new interface driver uvcvideo |
| [ 4.866467] USB Video Class driver (1.1.1) |
| [ 4.910130] random: nonblocking pool is initialized |
| [ 4.912244] usb 1-1.3: string descriptor 0 read error: -22 |
| [ 4.912327] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=311e |
| [ 4.912332] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 4.935393] find_i2c_adapter_num: i2c adapter SMBus I801 adapter not found on system. |
| [ 4.946389] ath: phy0: ASPM enabled: 0x43 |
| [ 4.946397] ath: EEPROM regdomain: 0x6a |
| [ 4.946400] ath: EEPROM indicates we should expect a direct regpair map |
| [ 4.946404] ath: Country alpha2 being used: 00 |
| [ 4.946406] ath: Regpair used: 0x6a |
| [ 4.991041] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 4.991756] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xf9000000, irq=16 |
| [ 5.170683] cfg80211: World regulatory domain updated: |
| [ 5.170690] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| [ 5.170695] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 5.170698] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 5.170702] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| [ 5.170705] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 5.170708] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 5.491209] init: failsafe main process (626) killed by TERM signal |
| [ 5.908243] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 5.908771] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 5.914514] audit_printk_skb: 111 callbacks suppressed |
| [ 5.914521] type=1400 audit(1415962491.360:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=774 comm="apparmor_parser" |
| [ 5.914532] type=1400 audit(1415962491.360:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=774 comm="apparmor_parser" |
| [ 5.930864] type=1400 audit(1415962491.376:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=774 comm="apparmor_parser" |
| [ 5.930972] type=1400 audit(1415962491.376:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=781 comm="apparmor_parser" |
| [ 5.935507] type=1400 audit(1415962491.380:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=774 comm="apparmor_parser" |
| [ 5.935521] type=1400 audit(1415962491.380:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=774 comm="apparmor_parser" |
| [ 5.946009] type=1400 audit(1415962491.392:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=774 comm="apparmor_parser" |
| [ 5.946087] type=1400 audit(1415962491.392:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=784 comm="apparmor_parser" |
| [ 5.946131] type=1400 audit(1415962491.392:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=784 comm="apparmor_parser" |
| [ 5.947213] type=1400 audit(1415962491.392:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=784 comm="apparmor_parser" |
| [ 6.104885] r8169 0000:02:00.0 eth0: link down |
| [ 6.104942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 6.106748] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 6.459151] init: alsa-restore main process (911) terminated with status 19 |
| [ 7.164626] init: plymouth-upstart-bridge main process (172) killed by TERM signal |
| [ 7.361153] Ebtables v2.0 registered |
| [ 7.396824] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 7.426571] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 8.438706] Bridge firewalling registered |
| [ 8.597196] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| [ 8.696586] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready |
| [ 9.618059] wlan0: authenticate with 9c:c1:72:10:42:7e |
| [ 9.631570] wlan0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [ 9.633571] wlan0: authenticated |
| [ 9.637889] wlan0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [ 9.641840] wlan0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=2) |
| [ 9.641920] wlan0: associated |
| [ 9.641965] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 10.905929] mei_me 0000:00:16.0: wait hw ready failed. status = -110 |
| [ 10.905940] mei_me 0000:00:16.0: hw_start failed ret = -110 |
| [ 10.905943] mei_me 0000:00:16.0: reset failed |
| [ 10.905947] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 10.905950] mei_me 0000:00:16.0: init hw failure. |
| [ 10.906143] mei_me 0000:00:16.0: initialization failed. |
| [ 10.906332] ACPI Warning: 0x00000528-0x0000052f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) |
| [ 10.906345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 10.906352] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) |
| [ 10.906358] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 10.906361] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) |
| [ 10.906367] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 10.906370] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 10.908394] [drm] Memory usable by graphics device = 2048M |
| [ 10.908402] checking generic (d0000000 410000) vs hw (d0000000 10000000) |
| [ 10.908405] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver |
| [ 10.908461] Console: switching to colour dummy device 80x25 |
| [ 10.909032] i915 0000:00:02.0: irq 46 for MSI/MSI-X |
| [ 10.909046] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 10.909048] [drm] Driver supports precise vblank timestamp query. |
| [ 10.909163] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 10.936620] [drm] Wrong MCH_SSKPD value: 0x16040307 |
| [ 10.936626] [drm] This can cause pipe underruns and display issues. |
| [ 10.936628] [drm] Please upgrade your BIOS to fix this. |
| [ 11.005881] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 |
| [ 11.024021] fbcon: inteldrmfb (fb0) is primary device |
| [ 11.024354] Console: switching to colour frame buffer device 170x48 |
| [ 11.024370] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 11.024374] i915 0000:00:02.0: registered panic notifier |
| [ 11.024398] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 |
| [ 11.025053] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X |
| [ 11.081991] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker |
| [ 11.081998] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 11.082002] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) |
| [ 11.082004] mono: mono_out=0x0 |
| [ 11.082006] inputs: |
| [ 11.082009] Internal Mic=0x11 |
| [ 11.082012] Mic=0xa |
| [ 11.114303] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 11.115689] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 11.117129] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 11.118567] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| [ 11.119677] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 |
| [ 11.125898] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| [ 11.181891] init: plymouth-splash main process (1288) terminated with status 1 |
| [ 11.270462] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-7/7-0067/input/input12 |
| [ 11.293487] init: plymouth-stop pre-start process (1299) terminated with status 1 |
| [ 12.308299] cgroup: systemd-logind (494) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. |
| [ 12.308306] cgroup: "memory" requires setting use_hierarchy to 1 on the root. |
| [ 12.826057] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off |
| [ 34.692793] audit_printk_skb: 18 callbacks suppressed |
| [ 34.692801] type=1400 audit(1415962520.132:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1852 comm="apparmor_parser" |
| [ 34.692814] type=1400 audit(1415962520.132:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1852 comm="apparmor_parser" |
| [ 34.693926] type=1400 audit(1415962520.136:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1852 comm="apparmor_parser" |