| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 01/28/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0640-0x000f064f] mapped at [ffff8800000f0640] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0810 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048376 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour *CGA 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.807 MHz processor |
| [ 0.000150] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.61 BogoMIPS (lpj=7639228) |
| [ 0.010787] pid_max: default: 32768 minimum: 301 |
| [ 0.015433] ACPI: Core revision 20140424 |
| [ 0.021778] ACPI: All ACPI Tables successfully acquired |
| [ 0.027136] Security Framework initialized |
| [ 0.031262] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037107] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044811] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.057800] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067527] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074426] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082242] Initializing cgroup subsys memory |
| [ 0.086623] Initializing cgroup subsys devices |
| [ 0.091089] Initializing cgroup subsys freezer |
| [ 0.095546] Initializing cgroup subsys net_cls |
| [ 0.100011] Initializing cgroup subsys blkio |
| [ 0.104293] Initializing cgroup subsys perf_event |
| [ 0.109011] Initializing cgroup subsys net_prio |
| [ 0.113595] tseg: 0000000000 |
| [ 0.113606] CPU: Physical Processor ID: 0 |
| [ 0.117628] CPU: Processor Core ID: 0 |
| [ 0.121309] mce: CPU supports 6 MCE banks |
| [ 0.125345] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130075] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145421] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.154423] ftrace: allocating 21614 entries in 85 pages |
| [ 0.169690] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215206] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332509] Performance Events: AMD PMU driver. |
| [ 0.337073] ... version: 0 |
| [ 0.341084] ... bit width: 48 |
| [ 0.345184] ... generic registers: 4 |
| [ 0.349195] ... value mask: 0000ffffffffffff |
| [ 0.354506] ... max period: 00007fffffffffff |
| [ 0.359824] ... fixed-purpose events: 0 |
| [ 0.363835] ... event mask: 000000000000000f |
| [ 0.371673] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379881] x86: Booting SMP configuration: |
| [ 0.384069] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428404] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581197] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585499] smpboot: Total of 8 processors activated (30557.64 BogoMIPS) |
| [ 0.597954] devtmpfs: initialized |
| [ 0.609292] pinctrl core: initialized pinctrl subsystem |
| [ 0.614700] NET: Registered protocol family 16 |
| [ 0.619370] cpuidle: using governor ladder |
| [ 0.623472] cpuidle: using governor menu |
| [ 0.627411] node 0 link 1: io port [1000, 3fff] |
| [ 0.627414] TOM: 00000000c0000000 aka 3072M |
| [ 0.631607] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.631611] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.631614] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.631616] TOM2: 0000000180000000 aka 6144M |
| [ 0.635896] bus: [bus 00-05] on node 0 link 1 |
| [ 0.635898] bus: 00 [io 0x0000-0xffff] |
| [ 0.635899] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.635901] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.636007] ACPI: bus type PCI registered |
| [ 0.640029] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.646633] PCI: Using configuration type 1 for base access |
| [ 0.652208] PCI: Using configuration type 1 for extended access |
| [ 0.669327] ACPI: Added _OSI(Module Device) |
| [ 0.673523] ACPI: Added _OSI(Processor Device) |
| [ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682686] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.689184] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.698348] ACPI: Interpreter enabled |
| [ 0.702029] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.711282] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.720557] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.729821] ACPI: (supports S0 S1 S5) |
| [ 0.733490] ACPI: Using IOAPIC for interrupt routing |
| [ 0.738507] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.766448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.772640] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.780851] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.820877] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.830878] PCI host bridge to bus 0000:00 |
| [ 0.834979] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.840470] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.846656] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.853534] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.860408] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.867284] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.873482] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.873684] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.873691] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.873817] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.873825] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.873845] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.873860] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.873882] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.873980] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.873988] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.874038] pci 0000:00:02.0: supports D1 D2 |
| [ 0.874043] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.874088] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.879808] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.879823] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.879855] pci 0000:00:02.1: supports D1 D2 |
| [ 0.879857] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.879900] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.885627] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.885661] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.885697] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.892827] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.899356] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.906495] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.913152] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.913160] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.913165] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.913169] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.913174] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.913178] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.913183] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.913317] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.913325] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.913330] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.913334] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.913339] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.913343] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.913348] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.913452] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.913517] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.919240] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.919283] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.919334] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.925050] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.925116] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.925171] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.930894] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.930944] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.930991] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.936714] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.936753] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.936809] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.942552] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.942684] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.942858] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.943001] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.943127] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.943255] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.943459] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.943562] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.943683] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.943818] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.944073] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.944102] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.944109] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.944122] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.944166] pci 0000:01:04.0: supports D1 D2 |
| [ 0.944264] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.949251] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.949255] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.949258] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.949337] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.949394] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.949420] pci 0000:02:00.0: reg 0x30: [mem 0x7be30000-0x7be3ffff pref] |
| [ 0.949527] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.949649] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.959654] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.964622] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.964709] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.964746] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.964874] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.964960] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.974961] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.979930] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.980009] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.985060] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.990046] pci_bus 0000:00: on NUMA node 0 |
| [ 0.990146] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.996295] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.002451] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.009759] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.017061] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.024361] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.031653] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.037797] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.043923] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.051215] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.058525] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.065828] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.071953] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.078079] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.085363] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.092655] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.099947] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.108472] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.114926] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.121400] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.127857] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.134619] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.139742] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.145414] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.153508] vgaarb: loaded |
| [ 1.156226] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.161708] PCI: Using ACPI for IRQ routing |
| [ 1.165898] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.165954] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.165958] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| [ 1.166264] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.173315] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.178377] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.187042] Switched to clocksource hpet |
| [ 1.202664] pnp: PnP ACPI init |
| [ 1.205768] ACPI: bus type PNP registered |
| [ 1.210299] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.210385] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.210467] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.210565] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.210602] pnp 00:04: [dma 2] |
| [ 1.210649] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.210681] pnp: PnP ACPI: found 5 devices |
| [ 1.214788] ACPI: bus type PNP unregistered |
| [ 1.226819] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be30000-0x7be3ffff pref]: no compatible bridge window |
| [ 1.236774] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.241750] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.247851] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.254643] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.261872] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.269098] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.274071] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.280867] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.285839] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.292634] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.297606] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.302582] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.302584] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.302587] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.302589] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.302592] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.302595] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.302598] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.302600] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.302603] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.302606] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.302750] NET: Registered protocol family 2 |
| [ 1.307650] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.315348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.322680] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.329291] TCP: reno registered |
| [ 1.332552] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.338761] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.345555] NET: Registered protocol family 1 |
| [ 1.350303] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.356382] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.362302] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.367832] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.373353] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.378934] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.384481] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.389996] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.395566] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.401116] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.406634] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.412226] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.417770] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.423291] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.428869] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.434387] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.434396] PCI: CLS 64 bytes, default 64 |
| [ 1.434507] Unpacking initramfs... |
| [ 1.817872] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.825834] PCI-DMA: Disabling AGP. |
| [ 1.829494] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.835075] PCI-DMA: using GART IOMMU. |
| [ 1.838826] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.850736] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.858896] microcode: CPU0: patch_level=0x01000084 |
| [ 1.863787] microcode: CPU1: patch_level=0x01000084 |
| [ 1.868688] microcode: CPU2: patch_level=0x01000084 |
| [ 1.873591] microcode: CPU3: patch_level=0x01000084 |
| [ 1.878496] microcode: CPU4: patch_level=0x01000084 |
| [ 1.883395] microcode: CPU5: patch_level=0x01000084 |
| [ 1.888297] microcode: CPU6: patch_level=0x01000084 |
| [ 1.893193] microcode: CPU7: patch_level=0x01000084 |
| [ 1.898175] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.906978] LVT offset 1 assigned for vector 0x400 |
| [ 1.911790] IBS: LVT offset 1 assigned |
| [ 1.915578] perf: AMD IBS detected (0x00000007) |
| [ 1.920731] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.927116] audit: initializing netlink subsys (disabled) |
| [ 1.932542] audit: type=2000 audit(1485648574.660:1): initialized |
| [ 1.939424] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.945829] zbud: loaded |
| [ 1.948724] VFS: Disk quotas dquot_6.5.2 |
| [ 1.952688] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.959232] msgmni has been set to 9945 |
| [ 1.963588] alg: No test for stdrng (krng) |
| [ 1.967745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.975241] io scheduler noop registered |
| [ 1.979177] io scheduler deadline registered |
| [ 1.983524] io scheduler cfq registered (default) |
| [ 1.988449] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.988578] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.988690] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.988797] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.988979] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.989002] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.989026] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.989047] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.989069] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.996037] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.002565] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 2.002576] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 2.009540] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.016070] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 2.016080] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 2.023046] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 2.023057] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 2.030026] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 2.030057] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.035662] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.042374] GHES: HEST is not enabled! |
| [ 2.046265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.072868] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.100539] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.108450] Linux agpgart interface v0.103 |
| [ 2.112764] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.123386] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.128366] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.133606] mousedev: PS/2 mouse device common for all mice |
| [ 2.139282] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.144409] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.150804] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.158660] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.164849] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.171299] AMD IOMMUv2 functionality not available on this system |
| [ 2.177627] TCP: cubic registered |
| [ 2.181107] NET: Registered protocol family 10 |
| [ 2.186004] mip6: Mobile IPv6 |
| [ 2.188993] NET: Registered protocol family 17 |
| [ 2.193517] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.202173] mpls_gso: MPLS GSO support |
| [ 2.206803] registered taskstats version 1 |
| [ 2.211678] rtc_cmos rtc_cmos: setting system clock to 2017-01-29 00:09:36 UTC (1485648576) |
| [ 2.220098] PM: Hibernation image not present or could not be loaded. |
| [ 2.221887] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 2.229746] Write protecting the kernel read-only data: 8192k |
| [ 2.238958] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 2.247537] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.280098] systemd-udevd[99]: starting version 215 |
| [ 2.285846] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 2.316840] SCSI subsystem initialized |
| [ 2.321026] ACPI: bus type USB registered |
| [ 2.325193] usbcore: registered new interface driver usbfs |
| [ 2.330807] FDC 0 is a post-1991 82077 |
| [ 2.330842] usbcore: registered new interface driver hub |
| [ 2.331011] usbcore: registered new device driver usb |
| [ 2.345141] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.350144] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.360390] PTP clock support registered |
| [ 2.360402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.362719] libata version 3.00 loaded. |
| [ 2.372004] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.372359] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.378470] ehci-pci: EHCI PCI platform driver |
| [ 2.378915] scsi0 : sata_nv |
| [ 2.386151] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.386287] scsi1 : sata_nv |
| [ 2.386383] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 2.386386] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 2.386701] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.387212] scsi2 : sata_nv |
| [ 2.387378] scsi3 : sata_nv |
| [ 2.387445] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 2.387447] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 2.435041] tg3.c:v3.137 (May 11, 2014) |
| [ 2.438896] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.444809] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.450885] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.451483] scsi4 : pata_amd |
| [ 2.454534] scsi5 : pata_amd |
| [ 2.457493] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 2.464458] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 2.471744] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.477007] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.484423] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.489000] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.489019] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.506615] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.512441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.519268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.521846] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.521848] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.521851] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.521853] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.522003] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.522177] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.572417] usb usb1: Product: EHCI Host Controller |
| [ 2.577304] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.583402] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.588314] hub 1-0:1.0: USB hub found |
| [ 2.592094] hub 1-0:1.0: 10 ports detected |
| [ 2.597314] ohci-pci: OHCI PCI platform driver |
| [ 2.601938] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.607537] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.611294] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.611296] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.611298] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.611300] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.649578] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.694547] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.702545] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.712583] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.719382] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.726604] usb usb2: Product: OHCI PCI host controller |
| [ 2.731837] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.737926] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.742788] hub 2-0:1.0: USB hub found |
| [ 2.746555] hub 2-0:1.0: 10 ports detected |
| [ 2.846494] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.010428] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.326319] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.515453] FS-Cache: Loaded |
| [ 3.523455] RPC: Registered named UNIX socket transport module. |
| [ 3.530561] RPC: Registered udp transport module. |
| [ 3.536632] RPC: Registered tcp transport module. |
| [ 3.542724] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.556153] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.572780] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.618325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.850239] Switched to clocksource tsc |
| [ 6.395380] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| [ 6.401997] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 6.408882] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 6.765075] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 6.778798] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.826109] systemd[1]: Inserted module 'autofs4' |
| [ 6.832133] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.987628] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 7.000352] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 7.015747] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 7.029165] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 7.036939] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 7.044543] systemd[1]: Starting Remote File Systems (Pre). |
| [ 7.061086] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 7.067205] systemd[1]: Starting Encrypted Volumes. |
| [ 7.081070] systemd[1]: Reached target Encrypted Volumes. |
| [ 7.086532] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 7.109056] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 7.118482] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 7.126537] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 7.134465] systemd[1]: Starting Paths. |
| [ 7.149053] systemd[1]: Reached target Paths. |
| [ 7.153450] systemd[1]: Starting Swap. |
| [ 7.165035] systemd[1]: Reached target Swap. |
| [ 7.169331] systemd[1]: Starting Root Slice. |
| [ 7.181039] systemd[1]: Created slice Root Slice. |
| [ 7.185771] systemd[1]: Starting User and Session Slice. |
| [ 7.201022] systemd[1]: Created slice User and Session Slice. |
| [ 7.206785] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 7.221024] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 7.226795] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 7.245000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 7.251986] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 7.268995] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 7.274943] systemd[1]: Starting udev Kernel Socket. |
| [ 7.288986] systemd[1]: Listening on udev Kernel Socket. |
| [ 7.294331] systemd[1]: Starting udev Control Socket. |
| [ 7.308987] systemd[1]: Listening on udev Control Socket. |
| [ 7.314421] systemd[1]: Starting Journal Socket. |
| [ 7.328972] systemd[1]: Listening on Journal Socket. |
| [ 7.333979] systemd[1]: Starting System Slice. |
| [ 7.348969] systemd[1]: Created slice System Slice. |
| [ 7.353880] systemd[1]: Starting system-getty.slice. |
| [ 7.369037] systemd[1]: Created slice system-getty.slice. |
| [ 7.374501] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 7.388952] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 7.395268] systemd[1]: Starting Increase datagram queue length... |
| [ 7.413958] systemd[1]: Starting udev Coldplug all Devices... |
| [ 7.445046] systemd[1]: Starting Load Kernel Modules... |
| [ 7.464652] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.470876] systemd[1]: Mounting Debug File System... |
| [ 7.486481] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.509956] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.525693] systemd[1]: Mounting Huge Pages File System... |
| [ 7.541778] systemd[1]: Starting Slices. |
| [ 7.552955] systemd[1]: Reached target Slices. |
| [ 7.557483] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.588955] systemd[1]: Mounted Huge Pages File System. |
| [ 7.604943] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.620899] systemd[1]: Mounted Debug File System. |
| [ 7.636890] systemd[1]: Started Increase datagram queue length. |
| [ 7.652916] systemd[1]: Started Load Kernel Modules. |
| [ 7.672934] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.696908] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.712889] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.758825] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.766710] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.782523] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.802275] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.818934] systemd[1]: Mounted Configuration File System. |
| [ 7.824833] systemd[1]: Mounted FUSE Control File System. |
| [ 7.830418] systemd[1]: Starting Syslog Socket. |
| [ 7.844835] systemd[1]: Listening on Syslog Socket. |
| [ 7.849788] systemd[1]: Starting Sockets. |
| [ 7.860870] systemd[1]: Reached target Sockets. |
| [ 7.865475] systemd[1]: Starting Journal Service... |
| [ 7.892886] systemd[1]: Started Journal Service. |
| [ 7.968508] systemd-udevd[213]: starting version 215 |
| [ 8.091005] systemd-journald[212]: Received request to flush runtime journal from PID 1 |
| [ 8.103632] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.112002] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.121561] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.130544] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.130724] EDAC MC: Ver: 3.0.0 |
| [ 8.138981] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 8.145064] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.153492] ACPI: Power Button [PWRB] |
| [ 8.153801] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 8.162984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.171717] ACPI: Power Button [PWRF] |
| [ 8.177619] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.194546] MCE: In-kernel MCE decoding enabled. |
| [ 8.201341] kvm: Nested Virtualization enabled |
| [ 8.206513] kvm: Nested Paging enabled |
| [ 8.206693] AMD64 EDAC driver v3.4.0 |
| [ 8.206801] EDAC amd64: DRAM ECC enabled. |
| [ 8.206814] EDAC amd64: F10h detected (node 0). |
| [ 8.206834] EDAC MC: DCT0 chip selects: |
| [ 8.206835] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.206836] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.206837] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.206838] EDAC amd64: MC: 6: 2048MB 7: 2048MB |
| [ 8.206838] EDAC MC: DCT1 chip selects: |
| [ 8.206839] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.206840] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.206841] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.206841] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.206842] EDAC amd64: using x4 syndromes. |
| [ 8.206881] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.206881] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.207082] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.207137] EDAC amd64: DRAM ECC enabled. |
| [ 8.287027] EDAC amd64: F10h detected (node 1). |
| [ 8.287058] EDAC MC: DCT0 chip selects: |
| [ 8.287060] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 8.287061] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.287062] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.287062] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 8.287063] EDAC MC: DCT1 chip selects: |
| [ 8.287064] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.287065] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.287065] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.287066] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 8.287067] EDAC amd64: using x4 syndromes. |
| [ 8.287068] EDAC amd64: MCT channel count: 1 |
| [ 8.287108] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 8.287290] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 8.287476] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 8.481083] random: nonblocking pool is initialized |
| [ 38.650147] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |