blob: 7fb4991718419cbd42fdcc9b67e21141db75e138 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/17/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000180000000 aka 6144M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0690-0x000f069f] mapped at [ffff8800000f0690]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000E1E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000BFFAE830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFFAE870 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAE8F0 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAE9E0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFFAEA10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAEA50 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAEB40 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1048376
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 262144
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [1] 1
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5ea000000-0xa5ebffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5012856K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229224K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1909.641 MHz processor
[ 0.000149] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.28 BogoMIPS (lpj=7638564)
[ 0.010769] pid_max: default: 32768 minimum: 301
[ 0.015405] ACPI: Core revision 20140424
[ 0.021625] ACPI: All ACPI Tables successfully acquired
[ 0.026949] Security Framework initialized
[ 0.031062] AppArmor: AppArmor disabled by boot time parameter
[ 0.036890] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.044328] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.057241] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.066977] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.073871] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.081685] Initializing cgroup subsys memory
[ 0.086057] Initializing cgroup subsys devices
[ 0.090512] Initializing cgroup subsys freezer
[ 0.094957] Initializing cgroup subsys net_cls
[ 0.099404] Initializing cgroup subsys blkio
[ 0.103682] Initializing cgroup subsys perf_event
[ 0.108385] Initializing cgroup subsys net_prio
[ 0.112954] tseg: 0000000000
[ 0.112964] CPU: Physical Processor ID: 0
[ 0.116977] CPU: Processor Core ID: 0
[ 0.120642] mce: CPU supports 6 MCE banks
[ 0.124660] LVT offset 0 assigned for vector 0xf9
[ 0.129373] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.144691] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.153690] ftrace: allocating 21614 entries in 85 pages
[ 0.168883] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.214381] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[ 0.328534] Performance Events: AMD PMU driver.
[ 0.333095] ... version: 0
[ 0.337099] ... bit width: 48
[ 0.341188] ... generic registers: 4
[ 0.345191] ... value mask: 0000ffffffffffff
[ 0.350494] ... max period: 00007fffffffffff
[ 0.355804] ... fixed-purpose events: 0
[ 0.359814] ... event mask: 000000000000000f
[ 0.367320] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.375581] x86: Booting SMP configuration:
[ 0.379760] .... node #1, CPUs: #1
[ 0.492560] x86: Booted up 2 nodes, 2 CPUs
[ 0.496842] smpboot: Total of 2 processors activated (7638.86 BogoMIPS)
[ 0.505285] devtmpfs: initialized
[ 0.516414] pinctrl core: initialized pinctrl subsystem
[ 0.521786] NET: Registered protocol family 16
[ 0.526445] cpuidle: using governor ladder
[ 0.530546] cpuidle: using governor menu
[ 0.534474] node 0 link 1: io port [1000, 3fff]
[ 0.534477] TOM: 00000000c0000000 aka 3072M
[ 0.538663] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[ 0.538667] node 0 link 1: mmio [fc000000, fc3fffff]
[ 0.538670] node 0 link 1: mmio [f8000000, fbffffff]
[ 0.538672] TOM2: 0000000180000000 aka 6144M
[ 0.542940] bus: [bus 00-05] on node 0 link 1
[ 0.542942] bus: 00 [io 0x0000-0xffff]
[ 0.542944] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.542945] bus: 00 [mem 0x180000000-0xfcffffffff]
[ 0.543028] ACPI: bus type PCI registered
[ 0.547041] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.553614] PCI: Using configuration type 1 for base access
[ 0.559186] PCI: Using configuration type 1 for extended access
[ 0.577213] ACPI: Added _OSI(Module Device)
[ 0.581403] ACPI: Added _OSI(Processor Device)
[ 0.585842] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.590546] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.596915] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.605904] ACPI: Interpreter enabled
[ 0.609576] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.618824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.628060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.637301] ACPI: (supports S0 S1 S5)
[ 0.640961] ACPI: Using IOAPIC for interrupt routing
[ 0.645969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.670640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.676818] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685022] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.716090] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
[ 0.726082] PCI host bridge to bus 0000:00
[ 0.730188] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.735674] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
[ 0.741850] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.748721] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[ 0.755591] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[ 0.762462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.768649] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.768805] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[ 0.768813] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
[ 0.768928] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.768939] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
[ 0.768951] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
[ 0.768957] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
[ 0.768975] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.769077] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.769087] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[ 0.769115] pci 0000:00:02.0: supports D1 D2
[ 0.769117] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.769162] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.774877] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.774888] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[ 0.774921] pci 0000:00:02.1: supports D1 D2
[ 0.774924] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.774968] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.780685] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.780703] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
[ 0.780714] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.787847] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.794368] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.801499] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.808119] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.808127] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
[ 0.808132] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
[ 0.808136] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
[ 0.808141] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
[ 0.808146] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
[ 0.808151] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[ 0.808249] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.808260] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
[ 0.808264] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
[ 0.808269] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
[ 0.808274] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
[ 0.808278] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
[ 0.808283] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[ 0.808383] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[ 0.808446] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.814158] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.814200] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.814245] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.819962] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.819998] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.820046] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.825760] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.825794] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.825845] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.831562] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.831598] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.831644] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.837365] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.837469] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.837566] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.837658] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.837755] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.837852] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[ 0.837956] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[ 0.838051] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[ 0.838146] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[ 0.838247] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[ 0.838395] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[ 0.838408] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.838418] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[ 0.838425] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
[ 0.838464] pci 0000:01:04.0: supports D1 D2
[ 0.838534] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.843493] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 0.843497] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.843500] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 0.843576] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[ 0.843594] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[ 0.843622] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[ 0.843688] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.843766] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.853757] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.858716] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.858792] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.858811] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[ 0.858897] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.858974] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.868969] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.873930] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.873991] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.879010] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.883985] pci_bus 0000:00: on NUMA node 0
[ 0.884085] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[ 0.890186] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[ 0.896305] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.903567] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.910838] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[ 0.918113] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[ 0.925386] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[ 0.931482] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[ 0.937590] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[ 0.944857] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[ 0.952130] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[ 0.959389] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[ 0.965492] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[ 0.971597] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[ 0.978861] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[ 0.986132] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.993402] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.001902] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[ 1.008335] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[ 1.014775] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[ 1.021217] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[ 1.027945] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.033004] vgaarb: setting as boot device: PCI:0000:01:04.0
[ 1.038667] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.046753] vgaarb: loaded
[ 1.049464] vgaarb: bridge control possible 0000:01:04.0
[ 1.054922] PCI: Using ACPI for IRQ routing
[ 1.059110] PCI: pci_cache_line_size set to 64 bytes
[ 1.059166] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.059170] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[ 1.059461] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.066507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.071543] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.079584] Switched to clocksource hpet
[ 1.095154] pnp: PnP ACPI init
[ 1.098255] ACPI: bus type PNP registered
[ 1.102772] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.102859] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 1.102938] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.103011] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.103047] pnp 00:04: [dma 2]
[ 1.103081] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.103112] pnp: PnP ACPI: found 5 devices
[ 1.107208] ACPI: bus type PNP unregistered
[ 1.118370] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[ 1.128311] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.133280] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.139369] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.146153] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.153377] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[ 1.160603] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.165566] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 1.172352] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.177316] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 1.184100] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 1.189065] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 1.194030] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
[ 1.194033] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.194035] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[ 1.194037] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[ 1.194040] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
[ 1.194043] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.194045] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 1.194048] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[ 1.194051] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 1.194053] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 1.194132] NET: Registered protocol family 2
[ 1.198862] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.206505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.213833] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.220435] TCP: reno registered
[ 1.223681] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.229890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.236621] NET: Registered protocol family 1
[ 1.241346] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.247421] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.253310] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.258831] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.264318] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.269892] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.275416] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.280900] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.286473] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.292009] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.297500] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.303072] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.308606] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.314092] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.319662] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.325173] pci 0000:01:04.0: Video device with shadowed ROM
[ 1.325182] PCI: CLS 64 bytes, default 64
[ 1.325280] Unpacking initramfs...
[ 1.703271] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[ 1.711135] PCI-DMA: Disabling AGP.
[ 1.714781] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.720361] PCI-DMA: using GART IOMMU.
[ 1.724121] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.735976] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.743796] microcode: CPU0: patch_level=0x01000084
[ 1.748686] microcode: CPU1: patch_level=0x01000084
[ 1.753675] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.762465] LVT offset 1 assigned for vector 0x400
[ 1.767267] IBS: LVT offset 1 assigned
[ 1.771041] perf: AMD IBS detected (0x00000007)
[ 1.776036] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.782186] audit: initializing netlink subsys (disabled)
[ 1.787614] audit: type=2000 audit(1492466969.524:1): initialized
[ 1.794452] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.800856] zbud: loaded
[ 1.803642] VFS: Disk quotas dquot_6.5.2
[ 1.807597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.814127] msgmni has been set to 9946
[ 1.818475] alg: No test for stdrng (krng)
[ 1.822629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.830093] io scheduler noop registered
[ 1.834024] io scheduler deadline registered
[ 1.838348] io scheduler cfq registered (default)
[ 1.843251] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.843389] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 1.843501] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 1.843607] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 1.843760] aer 0000:00:0b.0:pcie02: service driver aer loaded
[ 1.843787] aer 0000:00:0c.0:pcie02: service driver aer loaded
[ 1.843812] aer 0000:00:0d.0:pcie02: service driver aer loaded
[ 1.843838] aer 0000:00:0e.0:pcie02: service driver aer loaded
[ 1.843861] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[ 1.850829] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.857357] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[ 1.857369] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[ 1.864330] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.870851] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[ 1.870865] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[ 1.877824] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[ 1.877834] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[ 1.884790] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[ 1.884822] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.890423] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.897129] GHES: HEST is not enabled!
[ 1.901015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.927597] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.955238] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.963097] Linux agpgart interface v0.103
[ 1.967356] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[ 1.977496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.982470] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.987709] mousedev: PS/2 mouse device common for all mice
[ 1.993388] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.998444] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.004833] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.012694] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.018879] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.025317] AMD IOMMUv2 functionality not available on this system
[ 2.031643] TCP: cubic registered
[ 2.035034] NET: Registered protocol family 10
[ 2.039876] mip6: Mobile IPv6
[ 2.042850] NET: Registered protocol family 17
[ 2.047316] mpls_gso: MPLS GSO support
[ 2.047377] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.060145] registered taskstats version 1
[ 2.064932] rtc_cmos rtc_cmos: setting system clock to 2017-04-17 22:09:31 UTC (1492466971)
[ 2.073438] PM: Hibernation image not present or could not be loaded.
[ 2.075366] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.083199] Write protecting the kernel read-only data: 8192k
[ 2.092401] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.100969] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.131997] systemd-udevd[63]: starting version 215
[ 2.137753] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.174877] ACPI: bus type USB registered
[ 2.179013] usbcore: registered new interface driver usbfs
[ 2.185123] SCSI subsystem initialized
[ 2.186210] usbcore: registered new interface driver hub
[ 2.186290] usbcore: registered new device driver usb
[ 2.200287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.208133] libata version 3.00 loaded.
[ 2.208695] FDC 0 is a post-1991 82077
[ 2.212557] sata_nv 0000:00:07.0: version 3.5
[ 2.212823] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.219293] ehci-pci: EHCI PCI platform driver
[ 2.224503] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.231603] pps_core: LinuxPPS API ver. 1 registered
[ 2.236588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.249500] PTP clock support registered
[ 2.254542] scsi0 : sata_nv
[ 2.267024] tg3.c:v3.137 (May 11, 2014)
[ 2.270898] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[ 2.277845] scsi1 : sata_nv
[ 2.281161] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[ 2.288307] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[ 2.297698] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[ 2.306342] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 2.313213] scsi2 : sata_nv
[ 2.316173] scsi3 : sata_nv
[ 2.319029] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[ 2.326166] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[ 2.334785] pata_amd 0000:00:06.0: version 0.4.1
[ 2.335387] scsi4 : pata_amd
[ 2.339004] scsi5 : pata_amd
[ 2.341958] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[ 2.348911] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[ 2.354086] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[ 2.354089] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.354091] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.354093] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.390361] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[ 2.396204] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[ 2.402642] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 2.407899] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.415311] ehci-pci 0000:00:02.1: debug port 1
[ 2.419875] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 2.419895] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[ 2.435364] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.441182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.447965] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.455180] usb usb1: Product: EHCI Host Controller
[ 2.460057] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.466147] usb usb1: SerialNumber: 0000:00:02.1
[ 2.471109] hub 1-0:1.0: USB hub found
[ 2.474866] hub 1-0:1.0: 10 ports detected
[ 2.481670] ohci-pci: OHCI PCI platform driver
[ 2.486471] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 2.492063] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.499542] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[ 2.507027] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[ 2.517284] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.527010] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.534832] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.561137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.567929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.575147] usb usb2: Product: OHCI PCI host controller
[ 2.580371] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.586460] usb usb2: SerialNumber: 0000:00:02.0
[ 2.591303] hub 2-0:1.0: USB hub found
[ 2.595064] hub 2-0:1.0: 10 ports detected
[ 2.611085] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.621743] FS-Cache: Loaded
[ 2.629778] RPC: Registered named UNIX socket transport module.
[ 2.637125] RPC: Registered udp transport module.
[ 2.643209] RPC: Registered tcp transport module.
[ 2.649300] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.651065] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.667851] FS-Cache: Netfs 'nfs' registered for caching
[ 2.684278] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.716357] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.735034] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[ 2.926965] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.242847] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.738787] Switched to clocksource tsc
[ 6.008514] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 6.015121] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 6.022002] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.866592] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.880423] systemd[1]: Detected architecture 'x86-64'.
[ 6.927817] systemd[1]: Inserted module 'autofs4'
[ 6.934569] systemd[1]: Set hostname to <cb-test-tgt>.
[ 7.085067] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 7.097797] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.113216] systemd[1]: Expecting device dev-ttyS0.device...
[ 7.129560] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.137271] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.144853] systemd[1]: Starting Remote File Systems (Pre).
[ 7.161526] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.167641] systemd[1]: Starting Encrypted Volumes.
[ 7.181516] systemd[1]: Reached target Encrypted Volumes.
[ 7.186951] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.209523] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.218936] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.226979] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.234911] systemd[1]: Starting Paths.
[ 7.249492] systemd[1]: Reached target Paths.
[ 7.253870] systemd[1]: Starting Swap.
[ 7.265485] systemd[1]: Reached target Swap.
[ 7.269769] systemd[1]: Starting Root Slice.
[ 7.281483] systemd[1]: Created slice Root Slice.
[ 7.286212] systemd[1]: Starting User and Session Slice.
[ 7.301477] systemd[1]: Created slice User and Session Slice.
[ 7.307245] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.321469] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.327228] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.345462] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.352438] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.369451] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.375388] systemd[1]: Starting udev Kernel Socket.
[ 7.389442] systemd[1]: Listening on udev Kernel Socket.
[ 7.394773] systemd[1]: Starting udev Control Socket.
[ 7.409437] systemd[1]: Listening on udev Control Socket.
[ 7.414858] systemd[1]: Starting Journal Socket.
[ 7.429427] systemd[1]: Listening on Journal Socket.
[ 7.434423] systemd[1]: Starting System Slice.
[ 7.449425] systemd[1]: Created slice System Slice.
[ 7.454324] systemd[1]: Starting system-getty.slice.
[ 7.469418] systemd[1]: Created slice system-getty.slice.
[ 7.474829] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 7.489408] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.495705] systemd[1]: Starting Increase datagram queue length...
[ 7.514138] systemd[1]: Starting udev Coldplug all Devices...
[ 7.549168] systemd[1]: Starting Load Kernel Modules...
[ 7.564510] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.570963] systemd[1]: Mounting Debug File System...
[ 7.586710] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.610156] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.626179] systemd[1]: Mounting Huge Pages File System...
[ 7.642189] systemd[1]: Starting Slices.
[ 7.653430] systemd[1]: Reached target Slices.
[ 7.657965] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.685426] systemd[1]: Mounted Huge Pages File System.
[ 7.701346] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.717350] systemd[1]: Mounted Debug File System.
[ 7.733345] systemd[1]: Started Increase datagram queue length.
[ 7.749473] systemd[1]: Started Load Kernel Modules.
[ 7.769469] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.789379] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.805310] systemd[1]: Started udev Coldplug all Devices.
[ 7.850462] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 7.858319] systemd[1]: Starting Load/Save Random Seed...
[ 7.874291] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.890057] systemd[1]: Starting Apply Kernel Variables...
[ 7.906127] systemd[1]: Mounted Configuration File System.
[ 7.911829] systemd[1]: Mounted FUSE Control File System.
[ 7.917252] systemd[1]: Starting Syslog Socket.
[ 7.929280] systemd[1]: Listening on Syslog Socket.
[ 7.934184] systemd[1]: Starting Sockets.
[ 7.945355] systemd[1]: Reached target Sockets.
[ 7.949971] systemd[1]: Starting Journal Service...
[ 7.973353] systemd[1]: Started Journal Service.
[ 8.048267] systemd-udevd[162]: starting version 215
[ 8.182112] systemd-journald[161]: Received request to flush runtime journal from PID 1
[ 8.202753] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.217540] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[ 8.226235] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.237990] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.245579] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[ 8.254246] ACPI: Power Button [PWRB]
[ 8.260470] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.271002] ACPI: Power Button [PWRF]
[ 8.302021] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.310417] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.323803] EDAC MC: Ver: 3.0.0
[ 8.334536] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.343369] MCE: In-kernel MCE decoding enabled.
[ 8.353639] AMD64 EDAC driver v3.4.0
[ 8.358582] EDAC amd64: DRAM ECC enabled.
[ 8.368077] EDAC amd64: F10h detected (node 0).
[ 8.372649] EDAC MC: DCT0 chip selects:
[ 8.372651] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.377850] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.382897] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.387829] EDAC amd64: MC: 6: 2048MB 7: 2048MB
[ 8.392559] EDAC MC: DCT1 chip selects:
[ 8.392560] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.397308] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.402011] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.406729] EDAC amd64: MC: 6: 1024MB 7: 1024MB
[ 8.411436] EDAC amd64: using x4 syndromes.
[ 8.431257] EDAC amd64: CS6: Registered DDR2 RAM
[ 8.436976] EDAC amd64: CS7: Registered DDR2 RAM
[ 8.446924] kvm: Nested Virtualization enabled
[ 8.447600] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[ 8.461839] EDAC amd64: DRAM ECC enabled.
[ 8.467644] EDAC amd64: F10h detected (node 1).
[ 8.472220] EDAC MC: DCT0 chip selects:
[ 8.472223] EDAC amd64: MC: 0: 1024MB 1: 0MB
[ 8.473060] kvm: Nested Paging enabled
[ 8.480670] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.485368] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.490073] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.494809] EDAC MC: DCT1 chip selects:
[ 8.494811] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.499541] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.504252] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.508949] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.513656] EDAC amd64: using x4 syndromes.
[ 8.517846] EDAC amd64: MCT channel count: 1
[ 8.522149] EDAC amd64: CS0: Registered DDR2 RAM
[ 8.526949] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[ 8.536941] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 8.660504] random: nonblocking pool is initialized
[ 38.812215] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****