blob: 9dc03e1e08e63641b062a764cb75ef71a383db10 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/10/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000180000000 aka 6144M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0690-0x000f069f] mapped at [ffff8800000f0690]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000E1E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000BFFAE830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFFAE870 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAE8F0 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAE9E0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFFAEA10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAEA50 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAEB40 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1048376
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 262144
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [1] 1
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5012856K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229224K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1909.727 MHz processor
[ 0.000148] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.45 BogoMIPS (lpj=7638908)
[ 0.010769] pid_max: default: 32768 minimum: 301
[ 0.015406] ACPI: Core revision 20140424
[ 0.021617] ACPI: All ACPI Tables successfully acquired
[ 0.026942] Security Framework initialized
[ 0.031053] AppArmor: AppArmor disabled by boot time parameter
[ 0.036881] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.044322] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.057183] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.066918] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.073807] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.081616] Initializing cgroup subsys memory
[ 0.085988] Initializing cgroup subsys devices
[ 0.090443] Initializing cgroup subsys freezer
[ 0.094887] Initializing cgroup subsys net_cls
[ 0.099335] Initializing cgroup subsys blkio
[ 0.103613] Initializing cgroup subsys perf_event
[ 0.108314] Initializing cgroup subsys net_prio
[ 0.112884] tseg: 0000000000
[ 0.112894] CPU: Physical Processor ID: 0
[ 0.116908] CPU: Processor Core ID: 0
[ 0.120572] mce: CPU supports 6 MCE banks
[ 0.124591] LVT offset 0 assigned for vector 0xf9
[ 0.129303] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.144634] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.153635] ftrace: allocating 21614 entries in 85 pages
[ 0.168811] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.214311] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[ 0.328536] Performance Events: AMD PMU driver.
[ 0.333094] ... version: 0
[ 0.337099] ... bit width: 48
[ 0.341189] ... generic registers: 4
[ 0.345190] ... value mask: 0000ffffffffffff
[ 0.350493] ... max period: 00007fffffffffff
[ 0.355795] ... fixed-purpose events: 0
[ 0.359797] ... event mask: 000000000000000f
[ 0.367302] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.375563] x86: Booting SMP configuration:
[ 0.379744] .... node #1, CPUs: #1
[ 0.492538] x86: Booted up 2 nodes, 2 CPUs
[ 0.496825] smpboot: Total of 2 processors activated (7639.04 BogoMIPS)
[ 0.505281] devtmpfs: initialized
[ 0.516433] pinctrl core: initialized pinctrl subsystem
[ 0.521805] NET: Registered protocol family 16
[ 0.526458] cpuidle: using governor ladder
[ 0.530555] cpuidle: using governor menu
[ 0.534484] node 0 link 1: io port [1000, 3fff]
[ 0.534488] TOM: 00000000c0000000 aka 3072M
[ 0.538671] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[ 0.538675] node 0 link 1: mmio [fc000000, fc3fffff]
[ 0.538679] node 0 link 1: mmio [f8000000, fbffffff]
[ 0.538681] TOM2: 0000000180000000 aka 6144M
[ 0.542949] bus: [bus 00-05] on node 0 link 1
[ 0.542951] bus: 00 [io 0x0000-0xffff]
[ 0.542953] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.542955] bus: 00 [mem 0x180000000-0xfcffffffff]
[ 0.543037] ACPI: bus type PCI registered
[ 0.547049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.553623] PCI: Using configuration type 1 for base access
[ 0.559194] PCI: Using configuration type 1 for extended access
[ 0.577232] ACPI: Added _OSI(Module Device)
[ 0.581421] ACPI: Added _OSI(Processor Device)
[ 0.585860] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.590565] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.596940] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.605912] ACPI: Interpreter enabled
[ 0.609583] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.618841] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.628078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.637318] ACPI: (supports S0 S1 S5)
[ 0.640978] ACPI: Using IOAPIC for interrupt routing
[ 0.645985] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.670749] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.676931] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685134] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.717298] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
[ 0.727299] PCI host bridge to bus 0000:00
[ 0.731395] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.736879] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
[ 0.743055] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.749926] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[ 0.756794] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[ 0.763665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.769854] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.770012] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[ 0.770019] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
[ 0.770139] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.770149] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
[ 0.770161] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
[ 0.770168] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
[ 0.770185] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.770280] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.770291] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[ 0.770319] pci 0000:00:02.0: supports D1 D2
[ 0.770321] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.770365] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.776082] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.776093] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[ 0.776127] pci 0000:00:02.1: supports D1 D2
[ 0.776129] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.776174] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.781889] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.781908] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
[ 0.781918] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.789050] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.795573] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.802704] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.809322] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.809333] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
[ 0.809337] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
[ 0.809342] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
[ 0.809347] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
[ 0.809352] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
[ 0.809357] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[ 0.809455] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.809465] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
[ 0.809470] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
[ 0.809475] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
[ 0.809479] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
[ 0.809484] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
[ 0.809489] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[ 0.809586] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[ 0.809647] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.815363] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.815406] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.815451] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.821170] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.821206] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.821254] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.826976] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.827010] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.827059] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.832773] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.832805] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.832851] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.838569] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.838672] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.838770] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.838862] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.838959] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.839055] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[ 0.839158] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[ 0.839249] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[ 0.839348] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[ 0.839446] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[ 0.839596] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[ 0.839610] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.839619] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[ 0.839626] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
[ 0.839665] pci 0000:01:04.0: supports D1 D2
[ 0.839735] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.844697] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 0.844701] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.844705] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 0.844781] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[ 0.844800] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[ 0.844828] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
[ 0.844892] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.844970] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.854963] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.859929] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.860005] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.860023] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[ 0.860111] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.860187] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.870182] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.875142] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.875202] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.880221] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.885199] pci_bus 0000:00: on NUMA node 0
[ 0.885302] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[ 0.891414] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[ 0.897523] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.904791] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.912066] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[ 0.919343] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[ 0.926608] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[ 0.932703] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[ 0.938821] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[ 0.946086] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[ 0.953351] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[ 0.960611] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[ 0.966703] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[ 0.972813] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[ 0.980075] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[ 0.987349] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.994627] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.003119] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[ 1.009546] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[ 1.015979] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[ 1.022412] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[ 1.029150] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.034209] vgaarb: setting as boot device: PCI:0000:01:04.0
[ 1.039871] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.047960] vgaarb: loaded
[ 1.050665] vgaarb: bridge control possible 0000:01:04.0
[ 1.056126] PCI: Using ACPI for IRQ routing
[ 1.060314] PCI: pci_cache_line_size set to 64 bytes
[ 1.060373] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.060377] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[ 1.060671] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.067711] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.072748] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.080784] Switched to clocksource hpet
[ 1.096406] pnp: PnP ACPI init
[ 1.099510] ACPI: bus type PNP registered
[ 1.104020] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.104106] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 1.104187] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.104260] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.104296] pnp 00:04: [dma 2]
[ 1.104330] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.104361] pnp: PnP ACPI: found 5 devices
[ 1.108457] ACPI: bus type PNP unregistered
[ 1.119631] pci 0000:02:00.0: can't claim BAR 6 [mem 0x78400000-0x7840ffff pref]: no compatible bridge window
[ 1.129576] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.134545] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.140633] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.147418] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.154642] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[ 1.161867] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.166831] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 1.173617] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.178580] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 1.185366] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 1.190329] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 1.195295] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
[ 1.195298] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.195301] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[ 1.195303] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[ 1.195305] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
[ 1.195308] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.195311] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 1.195313] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[ 1.195316] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 1.195319] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 1.195402] NET: Registered protocol family 2
[ 1.200144] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.207785] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.215114] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.221714] TCP: reno registered
[ 1.224962] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.231172] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.237902] NET: Registered protocol family 1
[ 1.242633] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.248699] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.254583] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.260110] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.265599] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.271175] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.276698] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.282182] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.287754] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.293284] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.298774] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.304344] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.309870] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.315356] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.320928] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.326438] pci 0000:01:04.0: Video device with shadowed ROM
[ 1.326447] PCI: CLS 64 bytes, default 64
[ 1.326546] Unpacking initramfs...
[ 1.704676] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[ 1.712595] PCI-DMA: Disabling AGP.
[ 1.716224] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.721798] PCI-DMA: using GART IOMMU.
[ 1.725561] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.737396] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.745220] microcode: CPU0: patch_level=0x01000084
[ 1.750107] microcode: CPU1: patch_level=0x01000084
[ 1.755105] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.763896] LVT offset 1 assigned for vector 0x400
[ 1.768697] IBS: LVT offset 1 assigned
[ 1.772469] perf: AMD IBS detected (0x00000007)
[ 1.777465] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.783616] audit: initializing netlink subsys (disabled)
[ 1.789042] audit: type=2000 audit(1491851399.536:1): initialized
[ 1.795881] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.802284] zbud: loaded
[ 1.805075] VFS: Disk quotas dquot_6.5.2
[ 1.809025] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.815552] msgmni has been set to 9946
[ 1.819904] alg: No test for stdrng (krng)
[ 1.824060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.831534] io scheduler noop registered
[ 1.835468] io scheduler deadline registered
[ 1.839794] io scheduler cfq registered (default)
[ 1.844709] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.844833] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 1.844942] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 1.845053] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 1.845207] aer 0000:00:0b.0:pcie02: service driver aer loaded
[ 1.845230] aer 0000:00:0c.0:pcie02: service driver aer loaded
[ 1.845258] aer 0000:00:0d.0:pcie02: service driver aer loaded
[ 1.845284] aer 0000:00:0e.0:pcie02: service driver aer loaded
[ 1.845305] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[ 1.852270] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.858794] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[ 1.858803] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[ 1.865756] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.872279] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[ 1.872290] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[ 1.879245] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[ 1.879255] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[ 1.886210] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[ 1.886241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.891836] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.898542] GHES: HEST is not enabled!
[ 1.902429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.929007] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.956649] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.964514] Linux agpgart interface v0.103
[ 1.968762] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[ 1.978951] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.983926] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.989160] mousedev: PS/2 mouse device common for all mice
[ 1.994835] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.999892] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.006285] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.014136] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.020323] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.026764] AMD IOMMUv2 functionality not available on this system
[ 2.033084] TCP: cubic registered
[ 2.036473] NET: Registered protocol family 10
[ 2.041304] mip6: Mobile IPv6
[ 2.044277] NET: Registered protocol family 17
[ 2.048800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.057564] mpls_gso: MPLS GSO support
[ 2.061773] registered taskstats version 1
[ 2.066559] rtc_cmos rtc_cmos: setting system clock to 2017-04-10 19:10:01 UTC (1491851401)
[ 2.074972] PM: Hibernation image not present or could not be loaded.
[ 2.076895] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.084723] Write protecting the kernel read-only data: 8192k
[ 2.093921] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.102482] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.134480] systemd-udevd[63]: starting version 215
[ 2.140197] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.178988] ACPI: bus type USB registered
[ 2.187019] FDC 0 is a post-1991 82077
[ 2.191905] pps_core: LinuxPPS API ver. 1 registered
[ 2.192546] usbcore: registered new interface driver usbfs
[ 2.192566] usbcore: registered new interface driver hub
[ 2.192643] usbcore: registered new device driver usb
[ 2.212746] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.222120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.230066] PTP clock support registered
[ 2.236423] SCSI subsystem initialized
[ 2.244198] ehci-pci: EHCI PCI platform driver
[ 2.248967] libata version 3.00 loaded.
[ 2.249554] pata_amd 0000:00:06.0: version 0.4.1
[ 2.251658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.258168] scsi0 : pata_amd
[ 2.261255] tg3.c:v3.137 (May 11, 2014)
[ 2.265145] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[ 2.271220] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[ 2.277180] scsi1 : pata_amd
[ 2.280147] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[ 2.287106] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[ 2.294742] sata_nv 0000:00:07.0: version 3.5
[ 2.294939] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.301472] scsi2 : sata_nv
[ 2.304423] scsi3 : sata_nv
[ 2.307285] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[ 2.314421] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[ 2.321807] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 2.328224] scsi4 : sata_nv
[ 2.331173] scsi5 : sata_nv
[ 2.334178] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[ 2.341307] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[ 2.349204] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 2.354518] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.361953] ehci-pci 0000:00:02.1: debug port 1
[ 2.366548] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 2.366589] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[ 2.377355] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[ 2.387608] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.397342] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.405165] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.411914] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.417755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.424539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.431754] usb usb1: Product: EHCI Host Controller
[ 2.436634] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.442722] usb usb1: SerialNumber: 0000:00:02.1
[ 2.447362] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[ 2.453159] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[ 2.459057] hub 1-0:1.0: USB hub found
[ 2.462812] hub 1-0:1.0: 10 ports detected
[ 2.472582] ohci-pci: OHCI PCI platform driver
[ 2.477991] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 2.483804] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.491478] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[ 2.504594] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[ 2.514847] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.524580] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.532399] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.554355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.561140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.568360] usb usb2: Product: OHCI PCI host controller
[ 2.573587] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.579678] usb usb2: SerialNumber: 0000:00:02.0
[ 2.584567] hub 2-0:1.0: USB hub found
[ 2.588460] hub 2-0:1.0: 10 ports detected
[ 2.607313] FS-Cache: Loaded
[ 2.616245] RPC: Registered named UNIX socket transport module.
[ 2.623134] RPC: Registered udp transport module.
[ 2.629204] RPC: Registered tcp transport module.
[ 2.635283] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.644279] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.651213] FS-Cache: Netfs 'nfs' registered for caching
[ 2.665143] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.672252] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.712335] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.736230] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[ 2.960144] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.276034] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.739939] Switched to clocksource tsc
[ 5.912675] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 5.919284] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 5.926168] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.855843] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.869698] systemd[1]: Detected architecture 'x86-64'.
[ 6.915838] systemd[1]: Inserted module 'autofs4'
[ 6.922688] systemd[1]: Set hostname to <cb-test-tgt>.
[ 7.080219] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 7.092941] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.108297] systemd[1]: Expecting device dev-ttyS0.device...
[ 7.122870] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.130663] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.138276] systemd[1]: Starting Remote File Systems (Pre).
[ 7.154728] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.160858] systemd[1]: Starting Encrypted Volumes.
[ 7.174717] systemd[1]: Reached target Encrypted Volumes.
[ 7.180162] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.202709] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.212119] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.220175] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.228099] systemd[1]: Starting Paths.
[ 7.242691] systemd[1]: Reached target Paths.
[ 7.247076] systemd[1]: Starting Swap.
[ 7.258686] systemd[1]: Reached target Swap.
[ 7.262970] systemd[1]: Starting Root Slice.
[ 7.274680] systemd[1]: Created slice Root Slice.
[ 7.279404] systemd[1]: Starting User and Session Slice.
[ 7.294677] systemd[1]: Created slice User and Session Slice.
[ 7.300441] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.314670] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.320426] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.338666] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.345639] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.362658] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.368602] systemd[1]: Starting udev Kernel Socket.
[ 7.382645] systemd[1]: Listening on udev Kernel Socket.
[ 7.387981] systemd[1]: Starting udev Control Socket.
[ 7.402641] systemd[1]: Listening on udev Control Socket.
[ 7.408063] systemd[1]: Starting Journal Socket.
[ 7.422631] systemd[1]: Listening on Journal Socket.
[ 7.427640] systemd[1]: Starting System Slice.
[ 7.442627] systemd[1]: Created slice System Slice.
[ 7.447525] systemd[1]: Starting system-getty.slice.
[ 7.462618] systemd[1]: Created slice system-getty.slice.
[ 7.468028] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 7.482611] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.488915] systemd[1]: Starting Increase datagram queue length...
[ 7.508132] systemd[1]: Starting udev Coldplug all Devices...
[ 7.544702] systemd[1]: Starting Load Kernel Modules...
[ 7.562507] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.568862] systemd[1]: Mounting Debug File System...
[ 7.584682] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.602990] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.619953] systemd[1]: Mounting Huge Pages File System...
[ 7.635818] systemd[1]: Starting Slices.
[ 7.650635] systemd[1]: Reached target Slices.
[ 7.655163] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.686638] systemd[1]: Mounted Huge Pages File System.
[ 7.702542] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.718552] systemd[1]: Mounted Debug File System.
[ 7.734546] systemd[1]: Started Increase datagram queue length.
[ 7.750616] systemd[1]: Started Load Kernel Modules.
[ 7.770610] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.794520] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.810520] systemd[1]: Started udev Coldplug all Devices.
[ 7.855886] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 7.863748] systemd[1]: Starting Load/Save Random Seed...
[ 7.880209] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.900061] systemd[1]: Starting Apply Kernel Variables...
[ 7.916184] systemd[1]: Mounted Configuration File System.
[ 7.922030] systemd[1]: Mounted FUSE Control File System.
[ 7.927634] systemd[1]: Starting Syslog Socket.
[ 7.942601] systemd[1]: Listening on Syslog Socket.
[ 7.947591] systemd[1]: Starting Sockets.
[ 7.962508] systemd[1]: Reached target Sockets.
[ 7.967083] systemd[1]: Starting Journal Service...
[ 7.994617] systemd[1]: Started Journal Service.
[ 8.079278] systemd-udevd[162]: starting version 215
[ 8.203040] systemd-journald[161]: Received request to flush runtime journal from PID 1
[ 8.259542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.275303] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.281612] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[ 8.289571] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.298645] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[ 8.307246] ACPI: Power Button [PWRB]
[ 8.315707] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.326788] ACPI: Power Button [PWRF]
[ 8.358135] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.369586] EDAC MC: Ver: 3.0.0
[ 8.372990] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.373122] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.418715] MCE: In-kernel MCE decoding enabled.
[ 8.438040] AMD64 EDAC driver v3.4.0
[ 8.444256] EDAC amd64: DRAM ECC enabled.
[ 8.451603] kvm: Nested Virtualization enabled
[ 8.457902] kvm: Nested Paging enabled
[ 8.462348] EDAC amd64: F10h detected (node 0).
[ 8.466910] EDAC MC: DCT0 chip selects:
[ 8.466912] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.471631] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.476335] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.481085] EDAC amd64: MC: 6: 2048MB 7: 2048MB
[ 8.485790] EDAC MC: DCT1 chip selects:
[ 8.485792] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.490536] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.495243] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.500496] EDAC amd64: MC: 6: 1024MB 7: 1024MB
[ 8.505245] EDAC amd64: using x4 syndromes.
[ 8.510000] EDAC amd64: CS6: Registered DDR2 RAM
[ 8.514630] EDAC amd64: CS7: Registered DDR2 RAM
[ 8.519506] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[ 8.529487] EDAC amd64: DRAM ECC enabled.
[ 8.534182] EDAC amd64: F10h detected (node 1).
[ 8.538782] EDAC MC: DCT0 chip selects:
[ 8.538786] EDAC amd64: MC: 0: 1024MB 1: 0MB
[ 8.543496] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.548206] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.552919] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.557630] EDAC MC: DCT1 chip selects:
[ 8.557633] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.562345] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.567070] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.571780] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.576489] EDAC amd64: using x4 syndromes.
[ 8.580672] EDAC amd64: MCT channel count: 1
[ 8.585048] EDAC amd64: CS0: Registered DDR2 RAM
[ 8.589866] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[ 8.600056] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 8.693550] random: nonblocking pool is initialized
[ 38.841445] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****