blob: 0554cba1cf94607938b05921b609ec427cc22a65 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/08/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000180000000 aka 6144M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0690-0x000f069f] mapped at [ffff8800000f0690]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000E1E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000BFFAE830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFFAE870 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAE8F0 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAE9E0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFFAEA10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAEA50 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAEB40 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1048376
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 262144
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [1] 1
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5012856K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229224K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1909.846 MHz processor
[ 0.000147] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639384)
[ 0.010769] pid_max: default: 32768 minimum: 301
[ 0.015406] ACPI: Core revision 20140424
[ 0.021624] ACPI: All ACPI Tables successfully acquired
[ 0.026950] Security Framework initialized
[ 0.031062] AppArmor: AppArmor disabled by boot time parameter
[ 0.036889] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.044331] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.057211] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.066907] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.073798] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.081607] Initializing cgroup subsys memory
[ 0.085978] Initializing cgroup subsys devices
[ 0.090434] Initializing cgroup subsys freezer
[ 0.094879] Initializing cgroup subsys net_cls
[ 0.099326] Initializing cgroup subsys blkio
[ 0.103604] Initializing cgroup subsys perf_event
[ 0.108307] Initializing cgroup subsys net_prio
[ 0.112876] tseg: 0000000000
[ 0.112886] CPU: Physical Processor ID: 0
[ 0.116899] CPU: Processor Core ID: 0
[ 0.120563] mce: CPU supports 6 MCE banks
[ 0.124582] LVT offset 0 assigned for vector 0xf9
[ 0.129295] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.144624] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.153635] ftrace: allocating 21614 entries in 85 pages
[ 0.168770] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.214271] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[ 0.328535] Performance Events: AMD PMU driver.
[ 0.333094] ... version: 0
[ 0.337099] ... bit width: 48
[ 0.341188] ... generic registers: 4
[ 0.345191] ... value mask: 0000ffffffffffff
[ 0.350493] ... max period: 00007fffffffffff
[ 0.355796] ... fixed-purpose events: 0
[ 0.359798] ... event mask: 000000000000000f
[ 0.367306] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.375560] x86: Booting SMP configuration:
[ 0.379743] .... node #1, CPUs: #1
[ 0.492519] x86: Booted up 2 nodes, 2 CPUs
[ 0.496808] smpboot: Total of 2 processors activated (7639.28 BogoMIPS)
[ 0.505237] devtmpfs: initialized
[ 0.516359] pinctrl core: initialized pinctrl subsystem
[ 0.521737] NET: Registered protocol family 16
[ 0.526391] cpuidle: using governor ladder
[ 0.530484] cpuidle: using governor menu
[ 0.534415] node 0 link 1: io port [1000, 3fff]
[ 0.534418] TOM: 00000000c0000000 aka 3072M
[ 0.538602] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[ 0.538605] node 0 link 1: mmio [fc000000, fc3fffff]
[ 0.538609] node 0 link 1: mmio [f8000000, fbffffff]
[ 0.538611] TOM2: 0000000180000000 aka 6144M
[ 0.542881] bus: [bus 00-05] on node 0 link 1
[ 0.542883] bus: 00 [io 0x0000-0xffff]
[ 0.542885] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.542886] bus: 00 [mem 0x180000000-0xfcffffffff]
[ 0.542968] ACPI: bus type PCI registered
[ 0.546981] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.553555] PCI: Using configuration type 1 for base access
[ 0.559125] PCI: Using configuration type 1 for extended access
[ 0.577210] ACPI: Added _OSI(Module Device)
[ 0.581394] ACPI: Added _OSI(Processor Device)
[ 0.585835] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.590538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.596904] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.605886] ACPI: Interpreter enabled
[ 0.609559] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.618807] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.628043] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.637283] ACPI: (supports S0 S1 S5)
[ 0.640943] ACPI: Using IOAPIC for interrupt routing
[ 0.645950] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.670664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.676844] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685047] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.715660] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
[ 0.725651] PCI host bridge to bus 0000:00
[ 0.729754] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.735232] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
[ 0.741409] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.748278] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[ 0.755148] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[ 0.762020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.768209] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.768366] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[ 0.768373] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
[ 0.768491] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.768501] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
[ 0.768513] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
[ 0.768520] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
[ 0.768537] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.768641] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.768649] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[ 0.768685] pci 0000:00:02.0: supports D1 D2
[ 0.768687] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.768734] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.774454] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.774464] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[ 0.774498] pci 0000:00:02.1: supports D1 D2
[ 0.774500] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.774545] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.780260] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.780279] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
[ 0.780289] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.787421] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.793944] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.801075] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.807690] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.807700] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
[ 0.807705] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
[ 0.807710] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
[ 0.807714] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
[ 0.807719] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
[ 0.807724] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[ 0.807818] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.807826] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
[ 0.807831] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
[ 0.807835] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
[ 0.807840] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
[ 0.807844] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
[ 0.807849] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[ 0.807946] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[ 0.808008] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.813724] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.813766] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.813811] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.819530] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.819566] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819613] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.825326] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.825361] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.825411] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.831132] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.831169] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.831214] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.836938] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.837042] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.837139] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.837231] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.837327] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.837423] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[ 0.837523] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[ 0.837614] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[ 0.837707] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[ 0.837806] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[ 0.837960] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[ 0.837973] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.837983] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[ 0.837989] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
[ 0.838029] pci 0000:01:04.0: supports D1 D2
[ 0.838098] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.843060] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 0.843063] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.843067] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 0.843142] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[ 0.843160] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[ 0.843188] pci 0000:02:00.0: reg 0x30: [mem 0x7b630000-0x7b63ffff pref]
[ 0.843251] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.843329] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.853325] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.858292] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.858369] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.858387] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[ 0.858473] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.858549] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.868545] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.873505] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.873566] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.878585] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.883562] pci_bus 0000:00: on NUMA node 0
[ 0.883663] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[ 0.889768] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[ 0.895877] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.903141] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.910411] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[ 0.917689] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[ 0.924962] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[ 0.931066] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[ 0.937185] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[ 0.944459] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[ 0.951740] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[ 0.958999] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[ 0.965096] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[ 0.971209] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[ 0.978479] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[ 0.985748] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.993022] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.001525] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[ 1.007970] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[ 1.014398] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[ 1.020828] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[ 1.027574] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.032637] vgaarb: setting as boot device: PCI:0000:01:04.0
[ 1.038295] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.046382] vgaarb: loaded
[ 1.049089] vgaarb: bridge control possible 0000:01:04.0
[ 1.054550] PCI: Using ACPI for IRQ routing
[ 1.058736] PCI: pci_cache_line_size set to 64 bytes
[ 1.058791] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.058795] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[ 1.059089] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.066135] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.071163] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.079197] Switched to clocksource hpet
[ 1.094802] pnp: PnP ACPI init
[ 1.097907] ACPI: bus type PNP registered
[ 1.102416] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.102502] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 1.102582] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.102654] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.102690] pnp 00:04: [dma 2]
[ 1.102725] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.102757] pnp: PnP ACPI: found 5 devices
[ 1.106852] ACPI: bus type PNP unregistered
[ 1.118019] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b630000-0x7b63ffff pref]: no compatible bridge window
[ 1.127964] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.132931] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.139022] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.145806] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.153030] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[ 1.160256] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.165221] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 1.172005] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.176969] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 1.183753] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 1.188718] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 1.193685] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
[ 1.193688] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.193690] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[ 1.193692] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[ 1.193695] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
[ 1.193698] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.193700] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 1.193703] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[ 1.193706] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 1.193708] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 1.193792] NET: Registered protocol family 2
[ 1.198536] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.206175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.213503] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.220101] TCP: reno registered
[ 1.223351] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.229561] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.236300] NET: Registered protocol family 1
[ 1.241029] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.247096] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.252981] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.258506] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.263989] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.269563] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.275086] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.280571] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.286143] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.291671] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.297162] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.302735] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.308268] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.313753] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.319329] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.324843] pci 0000:01:04.0: Video device with shadowed ROM
[ 1.324852] PCI: CLS 64 bytes, default 64
[ 1.324951] Unpacking initramfs...
[ 1.703147] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[ 1.711060] PCI-DMA: Disabling AGP.
[ 1.714693] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.720274] PCI-DMA: using GART IOMMU.
[ 1.724036] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.735878] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.743694] microcode: CPU0: patch_level=0x01000084
[ 1.748583] microcode: CPU1: patch_level=0x01000084
[ 1.753584] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.762378] LVT offset 1 assigned for vector 0x400
[ 1.767182] IBS: LVT offset 1 assigned
[ 1.770965] perf: AMD IBS detected (0x00000007)
[ 1.775957] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.782104] audit: initializing netlink subsys (disabled)
[ 1.787535] audit: type=2000 audit(1491660581.528:1): initialized
[ 1.794373] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.800779] zbud: loaded
[ 1.803569] VFS: Disk quotas dquot_6.5.2
[ 1.807518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.814045] msgmni has been set to 9946
[ 1.818387] alg: No test for stdrng (krng)
[ 1.822545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.830029] io scheduler noop registered
[ 1.833961] io scheduler deadline registered
[ 1.838288] io scheduler cfq registered (default)
[ 1.843205] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.843330] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 1.843442] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 1.843548] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 1.843701] aer 0000:00:0b.0:pcie02: service driver aer loaded
[ 1.843728] aer 0000:00:0c.0:pcie02: service driver aer loaded
[ 1.843753] aer 0000:00:0d.0:pcie02: service driver aer loaded
[ 1.843776] aer 0000:00:0e.0:pcie02: service driver aer loaded
[ 1.843797] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[ 1.850755] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.857277] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[ 1.857286] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[ 1.864238] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.870763] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[ 1.870774] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[ 1.877729] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[ 1.877739] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[ 1.884694] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[ 1.884726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.890329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.897035] GHES: HEST is not enabled!
[ 1.900919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.927503] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.955146] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.963019] Linux agpgart interface v0.103
[ 1.967275] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[ 1.977422] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.982394] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.987630] mousedev: PS/2 mouse device common for all mice
[ 1.993303] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.998365] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.004750] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.012603] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.018790] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.025232] AMD IOMMUv2 functionality not available on this system
[ 2.031550] TCP: cubic registered
[ 2.034952] NET: Registered protocol family 10
[ 2.039780] mip6: Mobile IPv6
[ 2.042753] NET: Registered protocol family 17
[ 2.047276] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.055973] mpls_gso: MPLS GSO support
[ 2.060178] registered taskstats version 1
[ 2.065044] rtc_cmos rtc_cmos: setting system clock to 2017-04-08 14:09:43 UTC (1491660583)
[ 2.073456] PM: Hibernation image not present or could not be loaded.
[ 2.075383] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.083217] Write protecting the kernel read-only data: 8192k
[ 2.092415] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.100976] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.132978] systemd-udevd[63]: starting version 215
[ 2.138725] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.179152] ACPI: bus type USB registered
[ 2.187104] FDC 0 is a post-1991 82077
[ 2.194916] usbcore: registered new interface driver usbfs
[ 2.200600] SCSI subsystem initialized
[ 2.205082] pps_core: LinuxPPS API ver. 1 registered
[ 2.210103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.220539] PTP clock support registered
[ 2.227412] usbcore: registered new interface driver hub
[ 2.234124] tg3.c:v3.137 (May 11, 2014)
[ 2.235352] libata version 3.00 loaded.
[ 2.238017] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[ 2.244696] sata_nv 0000:00:07.0: version 3.5
[ 2.244953] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.256058] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[ 2.262598] usbcore: registered new device driver usb
[ 2.269439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.271178] scsi0 : sata_nv
[ 2.285553] ehci-pci: EHCI PCI platform driver
[ 2.288474] scsi1 : sata_nv
[ 2.288570] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[ 2.288573] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[ 2.307469] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 2.313856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.320678] scsi2 : sata_nv
[ 2.323818] scsi3 : sata_nv
[ 2.326729] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[ 2.333324] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[ 2.333327] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.333329] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.333331] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.368336] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[ 2.375493] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[ 2.381317] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[ 2.387339] pata_amd 0000:00:06.0: version 0.4.1
[ 2.388137] scsi4 : pata_amd
[ 2.391200] scsi5 : pata_amd
[ 2.394146] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[ 2.401104] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[ 2.408334] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 2.413742] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.421388] ehci-pci 0000:00:02.1: debug port 1
[ 2.425963] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 2.425981] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[ 2.439100] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[ 2.449355] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.459088] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.466911] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.473662] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.479547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.486348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.493570] usb usb1: Product: EHCI Host Controller
[ 2.498446] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.504537] usb usb1: SerialNumber: 0000:00:02.1
[ 2.509578] hub 1-0:1.0: USB hub found
[ 2.513351] hub 1-0:1.0: 10 ports detected
[ 2.525305] ohci-pci: OHCI PCI platform driver
[ 2.530107] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 2.535701] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.543250] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[ 2.604716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.611500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.618717] usb usb2: Product: OHCI PCI host controller
[ 2.623939] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.626692] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.635422] usb usb2: SerialNumber: 0000:00:02.0
[ 2.640345] hub 2-0:1.0: USB hub found
[ 2.644153] hub 2-0:1.0: 10 ports detected
[ 2.662888] FS-Cache: Loaded
[ 2.670232] RPC: Registered named UNIX socket transport module.
[ 2.677568] RPC: Registered udp transport module.
[ 2.683628] RPC: Registered tcp transport module.
[ 2.689717] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.702680] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.702955] FS-Cache: Netfs 'nfs' registered for caching
[ 2.723590] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.734639] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[ 2.770745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.950570] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.266450] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.738385] Switched to clocksource tsc
[ 5.917205] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 5.923815] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 5.930698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.934185] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.947710] systemd[1]: Detected architecture 'x86-64'.
[ 6.993956] systemd[1]: Inserted module 'autofs4'
[ 7.000883] systemd[1]: Set hostname to <cb-test-tgt>.
[ 7.150373] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 7.163091] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.178452] systemd[1]: Expecting device dev-ttyS0.device...
[ 7.193149] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.200865] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.208444] systemd[1]: Starting Remote File Systems (Pre).
[ 7.225120] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.231233] systemd[1]: Starting Encrypted Volumes.
[ 7.245211] systemd[1]: Reached target Encrypted Volumes.
[ 7.250727] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.273104] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.282529] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.290606] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.298536] systemd[1]: Starting Paths.
[ 7.313085] systemd[1]: Reached target Paths.
[ 7.317474] systemd[1]: Starting Swap.
[ 7.329078] systemd[1]: Reached target Swap.
[ 7.333364] systemd[1]: Starting Root Slice.
[ 7.345074] systemd[1]: Created slice Root Slice.
[ 7.349802] systemd[1]: Starting User and Session Slice.
[ 7.365069] systemd[1]: Created slice User and Session Slice.
[ 7.370835] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.385059] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.390824] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.409053] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.416033] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.433045] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.439000] systemd[1]: Starting udev Kernel Socket.
[ 7.453033] systemd[1]: Listening on udev Kernel Socket.
[ 7.458368] systemd[1]: Starting udev Control Socket.
[ 7.473028] systemd[1]: Listening on udev Control Socket.
[ 7.478457] systemd[1]: Starting Journal Socket.
[ 7.493023] systemd[1]: Listening on Journal Socket.
[ 7.498030] systemd[1]: Starting System Slice.
[ 7.513017] systemd[1]: Created slice System Slice.
[ 7.517922] systemd[1]: Starting system-getty.slice.
[ 7.533011] systemd[1]: Created slice system-getty.slice.
[ 7.538420] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 7.553003] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.559305] systemd[1]: Starting Increase datagram queue length...
[ 7.577824] systemd[1]: Starting udev Coldplug all Devices...
[ 7.604936] systemd[1]: Starting Load Kernel Modules...
[ 7.623556] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.629796] systemd[1]: Mounting Debug File System...
[ 7.646417] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.669897] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.685757] systemd[1]: Mounting Huge Pages File System...
[ 7.701655] systemd[1]: Starting Slices.
[ 7.716967] systemd[1]: Reached target Slices.
[ 7.721471] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.749032] systemd[1]: Mounted Huge Pages File System.
[ 7.764931] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.780934] systemd[1]: Mounted Debug File System.
[ 7.796941] systemd[1]: Started Increase datagram queue length.
[ 7.813022] systemd[1]: Started Load Kernel Modules.
[ 7.833002] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.852913] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.868913] systemd[1]: Started udev Coldplug all Devices.
[ 7.915266] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 7.923126] systemd[1]: Starting Load/Save Random Seed...
[ 7.938240] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.953717] systemd[1]: Starting Apply Kernel Variables...
[ 7.969795] systemd[1]: Mounted Configuration File System.
[ 7.975405] systemd[1]: Mounted FUSE Control File System.
[ 7.980877] systemd[1]: Starting Syslog Socket.
[ 7.992871] systemd[1]: Listening on Syslog Socket.
[ 7.997856] systemd[1]: Starting Sockets.
[ 8.008872] systemd[1]: Reached target Sockets.
[ 8.013448] systemd[1]: Starting Journal Service...
[ 8.036945] systemd[1]: Started Journal Service.
[ 8.112532] systemd-udevd[162]: starting version 215
[ 8.238112] systemd-journald[161]: Received request to flush runtime journal from PID 1
[ 8.276422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.292112] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.292183] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.292191] ACPI: Power Button [PWRB]
[ 8.292263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.292265] ACPI: Power Button [PWRF]
[ 8.321372] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[ 8.332877] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[ 8.377377] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.386655] EDAC MC: Ver: 3.0.0
[ 8.391129] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.399122] MCE: In-kernel MCE decoding enabled.
[ 8.410671] AMD64 EDAC driver v3.4.0
[ 8.414610] EDAC amd64: DRAM ECC enabled.
[ 8.419692] EDAC amd64: F10h detected (node 0).
[ 8.424616] EDAC MC: DCT0 chip selects:
[ 8.424618] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.430730] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.436753] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.442845] EDAC amd64: MC: 6: 2048MB 7: 2048MB
[ 8.447693] EDAC MC: DCT1 chip selects:
[ 8.447695] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.452437] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.457146] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.461900] EDAC amd64: MC: 6: 1024MB 7: 1024MB
[ 8.466637] EDAC amd64: using x4 syndromes.
[ 8.477435] EDAC amd64: CS6: Registered DDR2 RAM
[ 8.482084] EDAC amd64: CS7: Registered DDR2 RAM
[ 8.487795] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[ 8.498062] EDAC amd64: DRAM ECC enabled.
[ 8.506629] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.510954] EDAC amd64: F10h detected (node 1).
[ 8.510995] EDAC MC: DCT0 chip selects:
[ 8.510998] EDAC amd64: MC: 0: 1024MB 1: 0MB
[ 8.510999] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.511000] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.511001] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.511002] EDAC MC: DCT1 chip selects:
[ 8.511003] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.511004] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.511005] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.511006] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.511007] EDAC amd64: using x4 syndromes.
[ 8.511009] EDAC amd64: MCT channel count: 1
[ 8.511047] EDAC amd64: CS0: Registered DDR2 RAM
[ 8.511263] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[ 8.511340] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 8.597172] kvm: Nested Virtualization enabled
[ 8.603901] kvm: Nested Paging enabled
[ 8.763447] random: nonblocking pool is initialized
[ 38.922971] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****