blob: 131b0d8681781ebcca4dad2b9cf1dd7f6386d573 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.5-894-gb144a34-dirty 01/25/2017
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges disabled:
[ 0.000000] 00000-FFFFF uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F64F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20160831)
[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
[ 0.000000] ACPI: SSDT 0x000000001FFB2EC0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000001FFB2F30 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000001FFB2F70 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000001FFB2FB0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFB3010 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
[ 0.000000] On node 0 totalpages: 130878
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1735 pages used for memmap
[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1600.019 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400076)
[ 0.009440] pid_max: default: 32768 minimum: 301
[ 0.012023] ACPI: Core revision 20140424
[ 0.017421] ACPI: All ACPI Tables successfully acquired
[ 0.020193] Security Framework initialized
[ 0.022293] AppArmor: AppArmor disabled by boot time parameter
[ 0.024008] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.028101] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032243] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036118] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.039430] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.040360] Initializing cgroup subsys memory
[ 0.044016] Initializing cgroup subsys devices
[ 0.048022] Initializing cgroup subsys freezer
[ 0.050269] Initializing cgroup subsys net_cls
[ 0.052019] Initializing cgroup subsys blkio
[ 0.054188] Initializing cgroup subsys perf_event
[ 0.056011] Initializing cgroup subsys net_prio
[ 0.060159] mce: CPU supports 10 MCE banks
[ 0.062352] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[ 0.081975] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.094256] ftrace: allocating 21614 entries in 85 pages
[ 0.112331] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.115253] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.124000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.124007] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.132541] x86: Booted up 1 node, 1 CPUs
[ 0.134449] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
[ 0.136656] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.140345] devtmpfs: initialized
[ 0.150658] pinctrl core: initialized pinctrl subsystem
[ 0.152374] NET: Registered protocol family 16
[ 0.156509] cpuidle: using governor ladder
[ 0.158844] cpuidle: using governor menu
[ 0.160396] ACPI: bus type PCI registered
[ 0.164005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.168305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.172006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.180810] PCI: Using configuration type 1 for base access
[ 0.185943] ACPI: Added _OSI(Module Device)
[ 0.188005] ACPI: Added _OSI(Processor Device)
[ 0.192004] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196004] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.209768] ACPI: Interpreter enabled
[ 0.212010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.217530] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.225529] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.232007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.240006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
[ 0.248004] ACPI: (supports S0)
[ 0.249997] ACPI: Using IOAPIC for interrupt routing
[ 0.252065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.263263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.264012] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.268504] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.272232] PCI host bridge to bus 0000:00
[ 0.276008] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.278664] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.280008] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.284006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.288007] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.292095] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.292971] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
[ 0.298597] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.304006] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
[ 0.330553] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
[ 0.330921] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
[ 0.336006] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
[ 0.340006] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
[ 0.364006] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
[ 0.364897] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.368142] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.372052] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.376297] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.400006] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
[ 0.404006] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
[ 0.411388] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.412350] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
[ 0.413598] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
[ 0.417045] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
[ 0.420686] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.424219] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.427775] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
[ 0.429115] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
[ 0.433114] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
[ 0.437127] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
[ 0.440962] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.444019] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.446739] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.448456] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.452154] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.454900] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.456454] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.460256] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.463573] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.464239] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.467075] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.468005] vgaarb: loaded
[ 0.469357] vgaarb: bridge control possible 0000:00:01.0
[ 0.472126] PCI: Using ACPI for IRQ routing
[ 0.632502] PCI: pci_cache_line_size set to 64 bytes
[ 0.632769] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.632775] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
[ 0.633116] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.636046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.638405] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.645230] Switched to clocksource kvm-clock
[ 0.659927] pnp: PnP ACPI init
[ 0.661420] ACPI: bus type PNP registered
[ 0.663360] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.663487] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.663601] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.663842] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.664034] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.664784] pnp: PnP ACPI: found 5 devices
[ 0.666579] ACPI: bus type PNP unregistered
[ 0.677186] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
[ 0.679540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.679545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.679549] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.679552] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
[ 0.679604] NET: Registered protocol family 2
[ 0.681568] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.684273] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.686665] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.689203] TCP: reno registered
[ 0.690448] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.693434] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.695915] NET: Registered protocol family 1
[ 0.697696] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.697810] PCI: CLS 64 bytes, default 64
[ 0.697892] Unpacking initramfs...
[ 1.223938] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
[ 1.227430] microcode: AMD CPU family 0x6 not supported
[ 1.230149] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.232804] audit: initializing netlink subsys (disabled)
[ 1.234942] audit: type=2000 audit(1485364167.976:1): initialized
[ 1.237896] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.241431] zbud: loaded
[ 1.243017] VFS: Disk quotas dquot_6.5.2
[ 1.244903] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.248110] msgmni has been set to 983
[ 1.250256] alg: No test for stdrng (krng)
[ 1.251899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.254832] io scheduler noop registered
[ 1.256406] io scheduler deadline registered
[ 1.258082] io scheduler cfq registered (default)
[ 1.260075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.262218] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.264822] GHES: HEST is not enabled!
[ 1.266391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.308479] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.312071] Linux agpgart interface v0.103
[ 1.313894] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.318554] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.320548] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.322789] mousedev: PS/2 mouse device common for all mice
[ 1.325655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.329206] rtc_cmos 00:00: RTC can wake from S4
[ 1.332061] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.334953] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.338093] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.340733] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.343323] AMD IOMMUv2 functionality not available on this system
[ 1.345986] TCP: cubic registered
[ 1.347415] NET: Registered protocol family 10
[ 1.349578] mip6: Mobile IPv6
[ 1.350949] NET: Registered protocol family 17
[ 1.352820] mpls_gso: MPLS GSO support
[ 1.354840] registered taskstats version 1
[ 1.357150] rtc_cmos 00:00: setting system clock to 2017-01-25 17:09:28 UTC (1485364168)
[ 1.360530] PM: Hibernation image not present or could not be loaded.
[ 1.363054] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 1.366235] Write protecting the kernel read-only data: 8192k
[ 1.375240] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 1.380034] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 1.404265] systemd-udevd[52]: starting version 215
[ 1.406871] random: systemd-udevd urandom read with 3 bits of entropy available
[ 1.426109] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.429288] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.439911] SCSI subsystem initialized
[ 1.449332] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 1.454235] Floppy drive(s): fd0 is 1.44M
[ 1.473105] FDC 0 is a S82078B
[ 1.479528] libata version 3.00 loaded.
[ 1.895874] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
[ 1.898788] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.901664] ahci 0000:00:1f.2: version 3.0
[ 1.902363] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 1.906198] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.907137] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 1.910539] ahci 0000:00:1f.2: flags: ncq only
[ 1.915703] scsi0 : ahci
[ 1.917077] scsi1 : ahci
[ 1.918393] scsi2 : ahci
[ 1.919708] scsi3 : ahci
[ 1.921052] scsi4 : ahci
[ 1.922414] scsi5 : ahci
[ 1.923775] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
[ 1.927037] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
[ 1.930305] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
[ 1.933574] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
[ 1.936812] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
[ 1.940083] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
[ 2.224236] tsc: Refined TSC clocksource calibration: 1600.060 MHz
[ 2.260446] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.263239] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.267626] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.271975] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.275705] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.278152] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.313767] FS-Cache: Loaded
[ 2.321957] RPC: Registered named UNIX socket transport module.
[ 2.324307] RPC: Registered udp transport module.
[ 2.326105] RPC: Registered tcp transport module.
[ 2.327916] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.338971] FS-Cache: Netfs 'nfs' registered for caching
[ 2.360161] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.360777] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 4.364413] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.576246] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.582492] systemd[1]: Detected virtualization 'kvm'.
[ 4.584796] systemd[1]: Detected architecture 'x86-64'.
[ 4.635183] systemd[1]: Inserted module 'autofs4'
[ 4.639798] systemd[1]: Set hostname to <cb-test-tgt>.
[ 4.984706] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 4.990677] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.998194] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.004200] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.007746] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.010934] systemd[1]: Starting Remote File Systems (Pre).
[ 5.017535] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.021070] systemd[1]: Starting Encrypted Volumes.
[ 5.027155] systemd[1]: Reached target Encrypted Volumes.
[ 5.029353] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.037396] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.041209] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.044497] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.047743] systemd[1]: Starting Paths.
[ 5.052416] systemd[1]: Reached target Paths.
[ 5.054222] systemd[1]: Starting Swap.
[ 5.059121] systemd[1]: Reached target Swap.
[ 5.061114] systemd[1]: Starting Root Slice.
[ 5.066649] systemd[1]: Created slice Root Slice.
[ 5.069687] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.076058] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.078554] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.086444] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.089475] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.096477] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.099235] systemd[1]: Starting udev Kernel Socket.
[ 5.105400] systemd[1]: Listening on udev Kernel Socket.
[ 5.107829] systemd[1]: Starting udev Control Socket.
[ 5.113895] systemd[1]: Listening on udev Control Socket.
[ 5.116276] systemd[1]: Starting User and Session Slice.
[ 5.122461] systemd[1]: Created slice User and Session Slice.
[ 5.124994] systemd[1]: Starting Journal Socket.
[ 5.130613] systemd[1]: Listening on Journal Socket.
[ 5.133026] systemd[1]: Starting System Slice.
[ 5.138503] systemd[1]: Created slice System Slice.
[ 5.140514] systemd[1]: Starting Increase datagram queue length...
[ 5.146829] systemd[1]: Starting udev Coldplug all Devices...
[ 5.191197] systemd[1]: Starting Load Kernel Modules...
[ 5.230430] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.240138] systemd[1]: Mounting Debug File System...
[ 5.253032] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.280091] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.297142] systemd[1]: Mounting Huge Pages File System...
[ 5.312767] systemd[1]: Starting system-getty.slice.
[ 5.330230] systemd[1]: Created slice system-getty.slice.
[ 5.333848] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 5.343763] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.346579] systemd[1]: Starting Slices.
[ 5.351955] systemd[1]: Reached target Slices.
[ 5.354017] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.369893] systemd[1]: Mounted Huge Pages File System.
[ 5.382137] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.388593] systemd[1]: Mounted Debug File System.
[ 5.394987] systemd[1]: Started Increase datagram queue length.
[ 5.402991] systemd[1]: Started Load Kernel Modules.
[ 5.420121] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.434734] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.444182] systemd[1]: Started udev Coldplug all Devices.
[ 5.512350] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 5.515422] systemd[1]: Starting Load/Save Random Seed...
[ 5.521207] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.537678] systemd[1]: Starting Apply Kernel Variables...
[ 5.560898] systemd[1]: Mounted Configuration File System.
[ 5.563316] systemd[1]: Mounted FUSE Control File System.
[ 5.576631] systemd[1]: Starting Syslog Socket.
[ 5.595378] systemd[1]: Listening on Syslog Socket.
[ 5.603382] systemd[1]: Starting Sockets.
[ 5.616242] systemd[1]: Reached target Sockets.
[ 5.618058] systemd[1]: Starting Journal Service...
[ 5.639490] systemd[1]: Started Journal Service.
[ 5.774209] systemd-udevd[146]: starting version 215
[ 6.101104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.158385] ACPI: Power Button [PWRF]
[ 6.225311] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.229117] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.234495] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.269609] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
[ 6.281039] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 6.328683] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.358439] [drm] Initialized drm 1.1.0 20060810
[ 6.444414] ppdev: user-space parallel port driver
[ 6.471881] iTCO_vendor_support: vendor-support=0
[ 6.479349] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.484374] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 6.487940] iTCO_wdt: timeout value out of range, using 30
[ 6.502124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.912793] Key type dns_resolver registered
[ 6.948066] NFS: Registering the id_resolver key type
[ 6.950529] Key type id_resolver registered
[ 6.961584] Key type id_legacy registered
[ 7.208259] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.266432] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.272930] random: nonblocking pool is initialized
[ 7.287388] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 37.588640] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****