| [ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1 (2017-03-30) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] x86/fpu: Using 'eager' FPU context switches. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff01fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff02000-0x00000000bfffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-27-gec10c9a11c 05/03/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable |
| [ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0xbff02 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff91c6c0099000] 99000 size 24576 |
| [ 0.000000] BRK [0x27d52b000, 0x27d52bfff] PGTABLE |
| [ 0.000000] BRK [0x27d52c000, 0x27d52cfff] PGTABLE |
| [ 0.000000] BRK [0x27d52d000, 0x27d52dfff] PGTABLE |
| [ 0.000000] BRK [0x27d52e000, 0x27d52efff] PGTABLE |
| [ 0.000000] BRK [0x27d52f000, 0x27d52ffff] PGTABLE |
| [ 0.000000] BRK [0x27d530000, 0x27d530fff] PGTABLE |
| [ 0.000000] BRK [0x27d531000, 0x27d531fff] PGTABLE |
| [ 0.000000] BRK [0x27d532000, 0x27d532fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35829000-0x36c0bfff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFF160E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFF196F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFF16280 00346D (v02 COREv4 COREBOOT 20110725 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000BFF16240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000BFF16240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFF197F0 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x00000000BFF1B090 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x00000000BFF1B0D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFF1B110 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x00000000BFF1B180 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFF1B230 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f3fff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000043b5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff01fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043b5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff] |
| [ 0.000000] On node 0 totalpages: 4175009 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12221 pages used for memmap |
| [ 0.000000] DMA32 zone: 782082 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 52952 pages used for memmap |
| [ 0.000000] Normal zone: 3388928 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff02000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 35 pages/cpu @ffff91cafb200000 s103384 r8192 d31784 u524288 |
| [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109750 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 16335216K/16700036K available (6143K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 364820K reserved, 0K cma-reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2594.019 MHz processor |
| [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.03 BogoMIPS (lpj=10376076) |
| [ 0.000026] pid_max: default: 32768 minimum: 301 |
| [ 0.000039] ACPI: Core revision 20160831 |
| [ 0.002570] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.002611] Security Framework initialized |
| [ 0.002612] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.002618] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.003345] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.007070] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.008772] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.008785] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.009072] CPU: Physical Processor ID: 0 |
| [ 0.009072] CPU: Processor Core ID: 0 |
| [ 0.009079] mce: CPU supports 7 MCE banks |
| [ 0.009087] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.009097] process: using mwait in idle threads |
| [ 0.009099] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.009100] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.009485] Freeing SMP alternatives memory: 24K (ffffffffbac78000 - ffffffffbac7e000) |
| [ 0.011587] ftrace: allocating 25004 entries in 98 pages |
| [ 0.022252] smpboot: Max logical packages: 2 |
| [ 0.022257] DMAR: Host address width 36 |
| [ 0.022258] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.022266] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.022266] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.022269] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.022271] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.022272] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.022273] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.022547] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.022549] x2apic enabled |
| [ 0.022554] Switched APIC routing to cluster x2apic. |
| [ 0.023011] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.062699] TSC deadline timer enabled |
| [ 0.062703] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.062706] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.062733] ... version: 3 |
| [ 0.062733] ... bit width: 48 |
| [ 0.062733] ... generic registers: 4 |
| [ 0.062734] ... value mask: 0000ffffffffffff |
| [ 0.062734] ... max period: 00007fffffffffff |
| [ 0.062735] ... fixed-purpose events: 3 |
| [ 0.062735] ... event mask: 000000070000000f |
| [ 0.063263] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.063362] x86: Booting SMP configuration: |
| [ 0.063363] .... node #0, CPUs: #1 #2 #3 |
| [ 0.304826] x86: Booted up 1 node, 4 CPUs |
| [ 0.304829] smpboot: Total of 4 processors activated (20755.52 BogoMIPS) |
| [ 0.307983] devtmpfs: initialized |
| [ 0.308046] x86/mm: Memory block size: 128MB |
| [ 0.311397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.311406] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.311444] pinctrl core: initialized pinctrl subsystem |
| [ 0.311550] NET: Registered protocol family 16 |
| [ 0.327540] cpuidle: using governor ladder |
| [ 0.339548] cpuidle: using governor menu |
| [ 0.339597] ACPI: bus type PCI registered |
| [ 0.339599] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.339680] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| [ 0.339681] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| [ 0.339689] PCI: Using configuration type 1 for base access |
| [ 0.339723] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.355723] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.355923] ACPI: Added _OSI(Module Device) |
| [ 0.355924] ACPI: Added _OSI(Processor Device) |
| [ 0.355925] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.355925] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.356055] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.357986] ACPI : EC: EC started |
| [ 0.357987] ACPI : EC: interrupt blocked |
| [ 0.358029] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.358030] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.358031] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.358032] ACPI: Interpreter enabled |
| [ 0.358047] ACPI: (supports S0 S3 S4 S5) |
| [ 0.358047] ACPI: Using IOAPIC for interrupt routing |
| [ 0.358065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.361902] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.361906] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.361949] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.361957] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.362138] PCI host bridge to bus 0000:00 |
| [ 0.362139] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.362141] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.362142] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.362143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.362144] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.362145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.362146] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.362147] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.362147] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.362148] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.362149] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.362150] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.362151] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.362152] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.362153] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.362154] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.362155] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window] |
| [ 0.362156] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.362158] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.362164] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.362248] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.362257] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit] |
| [ 0.362262] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.362266] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.362339] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.362347] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit] |
| [ 0.362439] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.362459] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit] |
| [ 0.362526] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.362560] pci 0000:00:14.0: System wakeup disabled by ACPI |
| [ 0.362626] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.362705] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit] |
| [ 0.363034] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.363127] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.363142] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff] |
| [ 0.363150] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff] |
| [ 0.363158] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.363216] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.363279] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.363297] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff] |
| [ 0.363378] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.363411] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.363450] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.363466] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit] |
| [ 0.363537] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.363573] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.363615] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.363739] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.363824] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.363946] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.364033] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.364158] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.364243] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.364260] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff] |
| [ 0.364342] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.364376] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.364413] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.364573] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.364588] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.364596] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.364604] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.364612] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.364620] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.364629] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff] |
| [ 0.364672] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.364736] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.364752] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit] |
| [ 0.364772] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.364948] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.364980] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.365016] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff] |
| [ 0.365316] pci 0000:01:00.0: supports D1 D2 |
| [ 0.365317] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.376886] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.376898] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.377015] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000 |
| [ 0.377056] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit] |
| [ 0.377145] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref] |
| [ 0.377263] pci 0000:02:00.0: supports D1 |
| [ 0.377264] pci 0000:02:00.0: PME# supported from D0 D1 D3hot |
| [ 0.388890] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.388900] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.389006] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.389011] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.389015] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.389023] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.389134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.389177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.389218] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.389258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.389298] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.389340] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.389380] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.389420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.389976] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.390038] ACPI : EC: interrupt unblocked |
| [ 0.390044] ACPI : EC: event unblocked |
| [ 0.390051] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.390052] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.390144] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| [ 0.390145] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.390148] vgaarb: loaded |
| [ 0.390148] vgaarb: bridge control possible 0000:00:02.0 |
| [ 0.390212] PCI: Using ACPI for IRQ routing |
| [ 0.391683] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.391759] e820: reserve RAM buffer [mem 0xbff02000-0xbfffffff] |
| [ 0.391760] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff] |
| [ 0.391893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.391898] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.394922] clocksource: Switched to clocksource hpet |
| [ 0.400788] VFS: Disk quotas dquot_6.6.0 |
| [ 0.400813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.400888] pnp: PnP ACPI init |
| [ 0.400971] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.400973] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.400974] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.400975] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.400976] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| [ 0.400978] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.400979] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.400980] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.400981] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.400982] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.400985] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.401389] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.401391] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.401428] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.401430] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.401431] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.401452] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.401483] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.401509] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.401535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.401551] pnp: PnP ACPI: found 7 devices |
| [ 0.407730] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.407772] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.407778] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff] |
| [ 0.407790] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.407796] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff] |
| [ 0.407808] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.407811] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.407817] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff] |
| [ 0.407822] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.407830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.407831] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.407833] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.407833] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.407834] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.407835] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.407837] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.407837] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.407839] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.407840] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.407841] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.407842] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.407843] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.407844] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.407845] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.407846] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.407847] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window] |
| [ 0.407848] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.407849] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff] |
| [ 0.407850] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff] |
| [ 0.407851] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.407852] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff] |
| [ 0.407853] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.407938] NET: Registered protocol family 2 |
| [ 0.408117] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.408307] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.408414] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.408440] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.408478] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.408551] NET: Registered protocol family 1 |
| [ 0.408563] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.409131] PCI: CLS 64 bytes, default 64 |
| [ 0.409177] Unpacking initramfs... |
| [ 0.732563] Freeing initrd memory: 20364K (ffff91c6f5829000 - ffff91c6f6c0c000) |
| [ 0.732650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.732653] software IO TLB [mem 0xbbf02000-0xbff02000] (64MB) mapped at [ffff91c77bf02000-ffff91c77ff01fff] |
| [ 0.732973] audit: initializing netlink subsys (disabled) |
| [ 0.732990] audit: type=2000 audit(1493951479.728:1): initialized |
| [ 0.733260] Initialise system trusted keyrings |
| [ 0.733359] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.733398] zbud: loaded |
| [ 0.773802] Key type asymmetric registered |
| [ 0.773804] Asymmetric key parser 'x509' registered |
| [ 0.773824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.773855] io scheduler noop registered |
| [ 0.773856] io scheduler deadline registered |
| [ 0.773873] io scheduler cfq registered (default) |
| [ 0.774621] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.774623] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.774627] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded |
| [ 0.774647] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| [ 0.774648] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.774652] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded |
| [ 0.774669] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt |
| [ 0.774673] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded |
| [ 0.774681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.774692] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.774720] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded |
| [ 0.774724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.774738] efifb: probing for efifb |
| [ 0.774750] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k |
| [ 0.774751] efifb: mode is 1366x768x32, linelength=5632, pages=1 |
| [ 0.774751] efifb: scrolling: redraw |
| [ 0.774752] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.777173] Console: switching to colour frame buffer device 170x48 |
| [ 0.779388] fb0: EFI VGA frame buffer device |
| [ 0.779395] intel_idle: MWAIT substates: 0x21120 |
| [ 0.779396] intel_idle: v0.4.1 model 0x3A |
| [ 0.779540] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.779881] GHES: HEST is not enabled! |
| [ 0.779937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.780333] Linux agpgart interface v0.103 |
| [ 0.780370] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.780371] AMD IOMMUv2 functionality not available on this system |
| [ 0.780678] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.782466] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.782470] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.782589] mousedev: PS/2 mouse device common for all mice |
| [ 0.782628] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.782758] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.782784] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.782792] intel_pstate: Intel P-state driver initializing |
| [ 0.782981] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.783374] NET: Registered protocol family 10 |
| [ 0.783807] mip6: Mobile IPv6 |
| [ 0.783810] NET: Registered protocol family 17 |
| [ 0.783813] mpls_gso: MPLS GSO support |
| [ 0.784045] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.784421] microcode: sig=0x306a9, pf=0x10, revision=0x1b |
| [ 0.784512] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.784746] registered taskstats version 1 |
| [ 0.784749] Loading compiled-in X.509 certificates |
| [ 0.787551] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) |
| [ 0.788348] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' |
| [ 0.788378] zswap: loaded using pool lzo/zbud |
| [ 0.789022] rtc_cmos 00:03: setting system clock to 2017-05-05 02:31:20 UTC (1493951480) |
| [ 0.789081] PM: Hibernation image not present or could not be loaded. |
| [ 0.791174] Freeing unused kernel memory: 1392K (ffffffffbab1c000 - ffffffffbac78000) |
| [ 0.791176] Write protecting the kernel read-only data: 12288k |
| [ 0.792075] Freeing unused kernel memory: 2032K (ffff91c93cc04000 - ffff91c93ce00000) |
| [ 0.796789] Freeing unused kernel memory: 1252K (ffff91c93d0c7000 - ffff91c93d200000) |
| [ 0.807198] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.898609] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.898723] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.898737] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.898754] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.899797] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.899840] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.901161] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.901230] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.901248] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.901596] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.932127] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.932128] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.932828] PTP clock support registered |
| [ 0.935115] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.935117] ACPI: Thermal Zone [THM0] (44 C) |
| [ 0.935888] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.935890] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.938006] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.938007] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.938102] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.938883] ACPI: bus type USB registered |
| [ 0.938905] usbcore: registered new interface driver usbfs |
| [ 0.938914] usbcore: registered new interface driver hub |
| [ 0.938953] usbcore: registered new device driver usb |
| [ 0.941944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.942305] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.942306] sdhci: Copyright(c) Pierre Ossman |
| [ 0.942820] ehci-pci: EHCI PCI platform driver |
| [ 0.943656] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 0.946365] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 0.956568] SCSI subsystem initialized |
| [ 0.962820] AVX version of gcm_enc/dec engaged. |
| [ 0.962821] AES CTR mode by8 optimization enabled |
| [ 0.967696] libata version 3.00 loaded. |
| [ 1.073671] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.197799] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b |
| [ 1.197802] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.197861] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.198157] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.198171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 1.199295] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 1.199303] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.199609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.199611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.199612] usb usb1: Product: xHCI Host Controller |
| [ 1.199613] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd |
| [ 1.199615] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 1.199876] hub 1-0:1.0: USB hub found |
| [ 1.199915] hub 1-0:1.0: 4 ports detected |
| [ 1.200446] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.200451] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.200659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 1.200661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.200662] usb usb2: Product: xHCI Host Controller |
| [ 1.200664] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd |
| [ 1.200665] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.200944] hub 2-0:1.0: USB hub found |
| [ 1.200969] hub 2-0:1.0: 4 ports detected |
| [ 1.201365] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.201373] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 1.201389] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.205320] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.205346] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000 |
| [ 1.219008] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.219081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.219083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.219085] usb usb3: Product: EHCI Host Controller |
| [ 1.219086] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd |
| [ 1.219088] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 1.219404] hub 3-0:1.0: USB hub found |
| [ 1.219412] hub 3-0:1.0: 3 ports detected |
| [ 1.219765] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.219772] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.219788] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.223688] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.223707] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000 |
| [ 1.239026] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.239086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.239088] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.239090] usb usb4: Product: EHCI Host Controller |
| [ 1.239091] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd |
| [ 1.239092] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.239376] hub 4-0:1.0: USB hub found |
| [ 1.239384] hub 4-0:1.0: 3 ports detected |
| [ 1.239847] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.241379] ahci 0000:00:1f.2: version 3.0 |
| [ 1.241672] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.251801] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.251804] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.252708] scsi host0: ahci |
| [ 1.252932] scsi host1: ahci |
| [ 1.253131] scsi host2: ahci |
| [ 1.253296] scsi host3: ahci |
| [ 1.253453] scsi host4: ahci |
| [ 1.253601] scsi host5: ahci |
| [ 1.253698] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31 |
| [ 1.253702] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31 |
| [ 1.253705] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31 |
| [ 1.253706] ata4: DUMMY |
| [ 1.253708] ata5: DUMMY |
| [ 1.253708] ata6: DUMMY |
| [ 1.546995] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.565822] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.566573] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133 |
| [ 1.566576] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 1.566991] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.567348] ata1.00: configured for UDMA/133 |
| [ 1.567778] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5 |
| [ 1.695737] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.695754] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.696156] hub 3-1:1.0: USB hub found |
| [ 1.696335] hub 3-1:1.0: 6 ports detected |
| [ 1.714820] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 1.715605] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.715621] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.716030] hub 4-1:1.0: USB hub found |
| [ 1.716192] hub 4-1:1.0: 8 ports detected |
| [ 1.745073] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 1.763016] tsc: Refined TSC clocksource calibration: 2594.106 MHz |
| [ 1.763026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns |
| [ 1.804204] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 1.804215] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 1.842045] random: fast init done |
| [ 1.842178] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 1.917841] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.983026] usb 3-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.003041] usb 4-1.6: new full-speed USB device number 3 using ehci-pci |
| [ 2.095736] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f |
| [ 2.095739] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.095741] usb 3-1.4: Product: Broadcom Bluetooth Device |
| [ 2.095742] usb 3-1.4: Manufacturer: Broadcom Corp |
| [ 2.095744] usb 3-1.4: SerialNumber: 7CE9D3B7FC24 |
| [ 2.117355] usb 4-1.6: New USB device found, idVendor=08e6, idProduct=34ec |
| [ 2.117358] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.117360] usb 4-1.6: Product: GemPC Express |
| [ 2.117362] usb 4-1.6: Manufacturer: Gemplus |
| [ 2.175037] usb 3-1.6: new high-speed USB device number 4 using ehci-pci |
| [ 2.195034] usb 4-1.8: new high-speed USB device number 4 using ehci-pci |
| [ 2.233824] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.236159] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133 |
| [ 2.236162] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 2.236606] ata3.00: configured for UDMA/133 |
| [ 2.236990] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5 |
| [ 2.281006] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 2.281010] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| [ 2.281107] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| [ 2.281117] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.281124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.281198] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.281256] sd 2:0:0:0: [sdb] Write Protect is off |
| [ 2.281261] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.281310] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.283534] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7 |
| [ 2.284864] sd 2:0:0:0: [sdb] Attached SCSI disk |
| [ 2.295067] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea |
| [ 2.295069] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.295071] usb 3-1.6: Product: Integrated Camera |
| [ 2.295073] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.307568] usb 4-1.8: New USB device found, idVendor=17ef, idProduct=1009 |
| [ 2.307571] usb 4-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.307872] hub 4-1.8:1.0: USB hub found |
| [ 2.307922] hub 4-1.8:1.0: 4 ports detected |
| [ 2.428394] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 |
| [ 2.430247] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.474415] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.595093] usb 4-1.8.1: new high-speed USB device number 5 using ehci-pci |
| [ 2.670053] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 2.708158] usb 4-1.8.1: New USB device found, idVendor=050d, idProduct=0015 |
| [ 2.708161] usb 4-1.8.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 2.708163] usb 4-1.8.1: Product: USB 2.0 Hub |
| [ 2.708534] hub 4-1.8.1:1.0: USB hub found |
| [ 2.708699] hub 4-1.8.1:1.0: 4 ports detected |
| [ 2.787236] clocksource: Switched to clocksource tsc |
| [ 3.731758] md: linear personality registered for level -1 |
| [ 3.734224] md: multipath personality registered for level -4 |
| [ 3.736770] md: raid0 personality registered for level 0 |
| [ 3.739910] md: raid1 personality registered for level 1 |
| [ 3.811040] raid6: sse2x1 gen() 5250 MB/s |
| [ 3.879046] raid6: sse2x1 xor() 5244 MB/s |
| [ 3.947046] raid6: sse2x2 gen() 10431 MB/s |
| [ 4.015048] raid6: sse2x2 xor() 8003 MB/s |
| [ 4.083051] raid6: sse2x4 gen() 13090 MB/s |
| [ 4.151053] raid6: sse2x4 xor() 9735 MB/s |
| [ 4.151054] raid6: using algorithm sse2x4 gen() 13090 MB/s |
| [ 4.151054] raid6: .... xor() 9735 MB/s, rmw enabled |
| [ 4.151054] raid6: using ssse3x2 recovery algorithm |
| [ 4.152177] xor: automatically using best checksumming function avx |
| [ 4.152553] async_tx: api initialized (async) |
| [ 4.156102] md: raid6 personality registered for level 6 |
| [ 4.156104] md: raid5 personality registered for level 5 |
| [ 4.156105] md: raid4 personality registered for level 4 |
| [ 4.159350] md: raid10 personality registered for level 10 |
| [ 4.177947] Btrfs loaded, crc32c=crc32c-intel |
| [ 4.989664] PM: Starting manual resume from disk |
| [ 4.989669] PM: Hibernation image partition 8:2 present |
| [ 4.989671] PM: Looking for hibernation image. |
| [ 4.989887] PM: Image not found (code -22) |
| [ 4.989888] PM: Hibernation image not present or could not be loaded. |
| [ 5.126992] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) |
| [ 5.266461] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 5.271570] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 5.271691] systemd[1]: Detected architecture x86-64. |
| [ 5.271854] systemd[1]: Set hostname to <universi-mcbk52>. |
| [ 5.352862] random: crng init done |
| [ 5.427878] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked. |
| [ 5.427947] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked. |
| [ 5.429441] systemd[1]: Created slice User and Session Slice. |
| [ 5.429646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.429705] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 5.429738] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 5.429797] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 5.456932] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| [ 5.464733] RPC: Registered named UNIX socket transport module. |
| [ 5.464734] RPC: Registered udp transport module. |
| [ 5.464735] RPC: Registered tcp transport module. |
| [ 5.464736] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 5.474184] lp: driver loaded but no devices found |
| [ 5.477800] ppdev: user-space parallel port driver |
| [ 5.608552] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 5.608557] ACPI: Sleep Button [SLPB] |
| [ 5.608924] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 5.609006] ACPI: Lid Switch [LID] |
| [ 5.609061] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 5.609063] ACPI: Power Button [PWRF] |
| [ 5.622786] ACPI: AC Adapter [AC] (on-line) |
| [ 5.623154] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 5.629382] ACPI: Battery Slot [BAT0] (battery present) |
| [ 5.629483] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 5.635890] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 5.641636] Non-volatile memory driver v1.3 |
| [ 5.653310] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 5.653311] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 5.653312] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-27-gec10c9a11c, EC G2HT35WW-3.22 |
| [ 5.653313] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9 |
| [ 5.656275] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode |
| [ 5.656355] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 5.656356] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 5.673285] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 5.673385] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 5.674481] [drm] Initialized |
| [ 5.674625] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 |
| [ 5.685625] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 5.685666] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| [ 5.739441] ath: phy0: Killer Wireless card detected |
| [ 5.750991] ath: phy0: ASPM enabled: 0x43 |
| [ 5.750993] ath: EEPROM regdomain: 0x60 |
| [ 5.750994] ath: EEPROM indicates we should expect a direct regpair map |
| [ 5.750996] ath: Country alpha2 being used: 00 |
| [ 5.750996] ath: Regpair used: 0x60 |
| [ 5.768402] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 5.768718] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa23e824c0000, irq=17 |
| [ 5.819736] input: PC Speaker as /devices/platform/pcspkr/input/input8 |
| [ 5.843505] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 5.843507] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 5.843507] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 5.843508] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 6.196060] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem |
| [ 6.196065] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 6.200365] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr |
| [ 6.701313] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS |
| [ 7.264134] media: Linux media interface: v0.10 |
| [ 7.285048] Bluetooth: Core ver 2.22 |
| [ 7.285072] NET: Registered protocol family 31 |
| [ 7.285073] Bluetooth: HCI device and connection manager initialized |
| [ 7.285156] Bluetooth: HCI socket layer initialized |
| [ 7.285160] Bluetooth: L2CAP socket layer initialized |
| [ 7.285176] Bluetooth: SCO socket layer initialized |
| [ 7.293340] Linux video capture interface: v2.00 |
| [ 7.443688] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 7.444272] usbcore: registered new interface driver btusb |
| [ 7.447855] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 7.447862] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 7.447866] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 7.447870] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 7.448592] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9 |
| [ 7.448815] usbcore: registered new interface driver uvcvideo |
| [ 7.448816] USB Video Class driver (1.1.1) |
| [ 7.683217] mei_me 0000:00:16.0: wait hw ready failed |
| [ 7.683287] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 7.683342] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 7.819457] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 7.896219] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 7.900537] systemd-journald[299]: Received request to flush runtime journal from PID 1 |
| [ 9.329134] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.374688] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.699269] mei_me 0000:00:16.0: wait hw ready failed |
| [ 9.699322] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 9.699378] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 9.743336] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.828014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 10.477368] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 10.894282] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 10.894284] Bluetooth: BNEP filters: protocol multicast |
| [ 10.894288] Bluetooth: BNEP socket layer initialized |
| [ 10.928650] nfc: nfc_init: NFC Core ver 0.1 |
| [ 10.928673] NET: Registered protocol family 39 |
| [ 11.715316] mei_me 0000:00:16.0: wait hw ready failed |
| [ 11.715351] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 11.715382] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 11.715427] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 11.715454] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 11.715486] mei_me 0000:00:16.0: init hw failure. |
| [ 11.715606] mei_me 0000:00:16.0: initialization failed. |
| [ 11.715726] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247) |
| [ 11.715731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.715734] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 11.715738] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.715738] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 11.715741] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.715742] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 11.715745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 11.715746] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 11.717019] [drm] Memory usable by graphics device = 2048M |
| [ 11.717022] checking generic (e0000000 420000) vs hw (e0000000 10000000) |
| [ 11.717023] fb: switching to inteldrmfb from EFI VGA |
| [ 11.717067] Console: switching to colour dummy device 80x25 |
| [ 11.717269] [drm] Replacing VGA console driver |
| [ 11.721969] iTCO_vendor_support: vendor-support=0 |
| [ 11.723046] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 11.723084] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 11.724355] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 11.733298] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 11.733301] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 11.733302] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 11.733303] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 11.733304] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 11.733306] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 11.733307] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 11.733308] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 11.776988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 11.776990] [drm] Driver supports precise vblank timestamp query. |
| [ 11.776994] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x6b60 |
| [ 11.777000] [drm] failed to find VBIOS tables |
| [ 11.777293] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 12.017736] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 12.019051] acpi device:03: registered as cooling_device4 |
| [ 12.019106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 |
| [ 12.019231] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 12.019238] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 |
| [ 12.024022] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 12.024820] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 12.024890] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 12.025039] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 12.025102] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 12.025165] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 12.025250] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 12.025323] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 12.084989] intel_rapl: Found RAPL domain package |
| [ 12.084991] intel_rapl: Found RAPL domain core |
| [ 12.084992] intel_rapl: Found RAPL domain uncore |
| [ 12.208997] fbcon: inteldrmfb (fb0) is primary device |
| [ 12.891478] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 13.151529] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 13.161924] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.172567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.188923] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.428500] Console: switching to colour frame buffer device 170x48 |
| [ 13.447111] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 13.477122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 14.624368] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 14.639085] Ebtables v2.0 registered |
| [ 15.797575] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 15.797623] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 29.391908] Bluetooth: RFCOMM TTY layer initialized |
| [ 29.391915] Bluetooth: RFCOMM socket layer initialized |
| [ 29.391922] Bluetooth: RFCOMM ver 1.11 |
| [ 133.231136] usb 4-1.8.2: new high-speed USB device number 6 using ehci-pci |
| [ 133.487049] usb 4-1.8.2: new high-speed USB device number 7 using ehci-pci |
| [ 133.596489] usb 4-1.8.2: New USB device found, idVendor=05c6, idProduct=0a02 |
| [ 133.596492] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 133.596493] usb 4-1.8.2: Product: Intex Aqua Fish |
| [ 133.596495] usb 4-1.8.2: Manufacturer: Intex |
| [ 133.596496] usb 4-1.8.2: SerialNumber: 60f2d81a |
| [ 134.213807] usbcore: registered new interface driver cdc_ether |
| [ 134.216970] rndis_host 4-1.8.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.8.2, RNDIS device, f6:e5:3a:0b:e5:5a |
| [ 134.216998] usbcore: registered new interface driver rndis_host |
| [ 134.229014] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: renamed from usb0 |
| [ 134.318920] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u8u2: link is not ready |
| [ 154.018310] fuse init (API version 7.26) |
| [ 159.215072] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 159.217255] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 |
| [ 159.217260] Bluetooth: HIDP socket layer initialized |
| [ 159.223130] logitech-hidpp-device 0005:046D:B00C.0001: unknown main item tag 0x0 |
| [ 159.280968] logitech-hidpp-device 0005:046D:B00C.0001: HID++ 2.0 device connected. |
| [ 159.361064] input: Logitech Rechargeable Trackpad T651 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/hci0:11/0005:046D:B00C.0001/input/input19 |
| [ 159.361483] logitech-hidpp-device 0005:046D:B00C.0001: input,hidraw0: BLUETOOTH HID v5.00 Mouse [Logitech Rechargeable Trackpad T651] on 7c:e9:d3:b7:fc:24 |
| [ 367.142415] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 659.573810] usb 4-1.8.4: new high-speed USB device number 8 using ehci-pci |
| [ 659.682808] usb 4-1.8.4: New USB device found, idVendor=18d1, idProduct=4ee1 |
| [ 659.682811] usb 4-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 659.682812] usb 4-1.8.4: Product: Nexus 5 |
| [ 659.682813] usb 4-1.8.4: Manufacturer: LGE |
| [ 659.682814] usb 4-1.8.4: SerialNumber: 066e19af2115ab07 |
| [ 682.196064] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 689.815372] usb 4-1.8.4: USB disconnect, device number 8 |
| [ 690.038735] usb 4-1.8.4: new high-speed USB device number 9 using ehci-pci |
| [ 690.147754] usb 4-1.8.4: New USB device found, idVendor=18d1, idProduct=4ee1 |
| [ 690.147758] usb 4-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 690.147759] usb 4-1.8.4: Product: Nexus 5 |
| [ 690.147760] usb 4-1.8.4: Manufacturer: LGE |
| [ 690.147761] usb 4-1.8.4: SerialNumber: 066e19af2115ab07 |
| [ 997.214253] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1312.216866] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1627.212955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1942.221615] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 2257.259616] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 2572.242878] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 2887.283440] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 3202.270172] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 3263.452685] usb 4-1.8.2: USB disconnect, device number 7 |
| [ 3263.454879] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: unregister 'rndis_host' usb-0000:00:1d.0-1.8.2, RNDIS device |
| [ 3368.381200] usb 4-1.8.2: new high-speed USB device number 10 using ehci-pci |
| [ 3368.490392] usb 4-1.8.2: New USB device found, idVendor=05c6, idProduct=0a02 |
| [ 3368.490395] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3368.490395] usb 4-1.8.2: Product: Intex Aqua Fish |
| [ 3368.490396] usb 4-1.8.2: Manufacturer: Intex |
| [ 3368.490397] usb 4-1.8.2: SerialNumber: 60f2d81a |
| [ 3368.493114] rndis_host 4-1.8.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.8.2, RNDIS device, 4e:e5:c8:4d:a0:72 |
| [ 3369.020926] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: renamed from usb0 |
| [ 3369.062188] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u8u2: link is not ready |
| [ 3517.304120] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 3832.295426] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 4147.329635] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 4462.322623] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 4777.315233] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 5019.916079] usb 4-1.8.2: USB disconnect, device number 10 |
| [ 5019.918288] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: unregister 'rndis_host' usb-0000:00:1d.0-1.8.2, RNDIS device |
| [ 5053.161910] usb 4-1.8.2: new high-speed USB device number 11 using ehci-pci |
| [ 5053.417936] usb 4-1.8.2: new high-speed USB device number 12 using ehci-pci |
| [ 5053.527486] usb 4-1.8.2: New USB device found, idVendor=05c6, idProduct=0a02 |
| [ 5053.527489] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 5053.527491] usb 4-1.8.2: Product: Intex Aqua Fish |
| [ 5053.527492] usb 4-1.8.2: Manufacturer: Intex |
| [ 5053.527493] usb 4-1.8.2: SerialNumber: 60f2d81a |
| [ 5053.530723] rndis_host 4-1.8.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.8.2, RNDIS device, 56:a7:69:95:97:14 |
| [ 5054.061824] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: renamed from usb0 |
| [ 5054.101363] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u8u2: link is not ready |
| [ 5092.304238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 5407.360998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 5722.323769] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 6037.351338] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 6247.981212] usb 4-1.8.2: USB disconnect, device number 12 |
| [ 6247.983418] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: unregister 'rndis_host' usb-0000:00:1d.0-1.8.2, RNDIS device |
| [ 6352.344321] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 6667.404267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 6945.968962] traps: psi-plus[8604] general protection ip:7fcf8e4e6f4f sp:7ffc42303cd0 error:0 |
| [ 6945.968971] in libQtCore.so.4.8.7[7fcf8e41d000+2e7000] |
| [ 6982.384196] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 7289.897121] usb 4-1.8.2: new high-speed USB device number 13 using ehci-pci |
| [ 7290.153118] usb 4-1.8.2: new high-speed USB device number 14 using ehci-pci |
| [ 7290.262459] usb 4-1.8.2: New USB device found, idVendor=05c6, idProduct=0a02 |
| [ 7290.262462] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 7290.262463] usb 4-1.8.2: Product: Intex Aqua Fish |
| [ 7290.262464] usb 4-1.8.2: Manufacturer: Intex |
| [ 7290.262465] usb 4-1.8.2: SerialNumber: 60f2d81a |
| [ 7290.265334] rndis_host 4-1.8.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.8.2, RNDIS device, 82:f0:3a:38:a2:cf |
| [ 7290.868038] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: renamed from usb0 |
| [ 7290.997832] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u8u2: link is not ready |
| [ 7297.367609] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 7365.527896] traps: psi-plus[8689] general protection ip:7ff835ea8f4f sp:7ffeeca9be70 error:0 |
| [ 7365.527903] in libQtCore.so.4.8.7[7ff835ddf000+2e7000] |
| [ 7612.407954] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 7697.236311] usb 4-1.8.2: USB disconnect, device number 14 |
| [ 7697.238524] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: unregister 'rndis_host' usb-0000:00:1d.0-1.8.2, RNDIS device |
| [ 7927.445264] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 8119.103447] usb 4-1.8.2: new high-speed USB device number 15 using ehci-pci |
| [ 8119.359453] usb 4-1.8.2: new high-speed USB device number 16 using ehci-pci |
| [ 8119.468858] usb 4-1.8.2: New USB device found, idVendor=05c6, idProduct=0a02 |
| [ 8119.468860] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 8119.468861] usb 4-1.8.2: Product: Intex Aqua Fish |
| [ 8119.468862] usb 4-1.8.2: Manufacturer: Intex |
| [ 8119.468863] usb 4-1.8.2: SerialNumber: 60f2d81a |
| [ 8119.472072] rndis_host 4-1.8.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.8.2, RNDIS device, d6:4c:7d:1b:2b:d5 |
| [ 8120.014998] rndis_host 4-1.8.2:1.0 enp0s29u1u8u2: renamed from usb0 |
| [ 8120.120405] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u8u2: link is not ready |
| [ 8242.457904] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 8557.472606] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 8872.481126] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9187.436718] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9502.496694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9817.457907] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [10132.521219] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [10447.481337] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [10762.540975] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [11077.503228] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [11392.540855] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [11707.531816] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [12022.534594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [12337.551999] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [12652.588210] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [12967.573977] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [13282.628582] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [13597.598852] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [13912.646252] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [14227.618263] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [14542.613662] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [14857.642340] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [15172.682915] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [15487.664105] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [15802.709570] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [16117.681409] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [16432.724709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [16747.704985] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [17062.695919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [17377.738229] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [17692.767685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [18007.754531] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [18322.738405] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [18637.761498] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [18952.783442] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [19267.785439] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [19582.787885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [19897.785587] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |