| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.19.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19-1~exp1 (2015-02-12) |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c53fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7c54000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.3-382-g2ae9cce 03/07/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 000000021f000000 aka 8688M |
| [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC |
| [ 0.000000] found SMP MP-table at [mem 0x000f4db0-0x000f4dbf] mapped at [c00f4db0] |
| [ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff] |
| [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff] |
| [ 0.000000] [mem 0x37600000-0x377fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff] |
| [ 0.000000] [mem 0x20000000-0x375fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff] |
| [ 0.000000] [mem 0x37800000-0x379fdfff] page 4k |
| [ 0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE |
| [ 0.000000] BRK [0x017ef000, 0x017f0fff] PGTABLE |
| [ 0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE |
| [ 0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE |
| [ 0.000000] log_buf_len: 2097152 bytes |
| [ 0.000000] early log buf free: 127956(97%) |
| [ 0.000000] RAMDISK: [mem 0x35c0c000-0x36dfdfff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x000F4FB0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0xC7C6F0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0xC7C71750 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0xC7C6F280 0024C9 (v02 ASROCK COREBOOT 00010001 INTL 20160212) |
| [ 0.000000] ACPI: FACS 0xC7C6F240 000040 |
| [ 0.000000] ACPI: SSDT 0xC7C71850 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0xC7C718A0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0xC7C718E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HEST 0xC7C71940 000028 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 0xC7C71970 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0xC7C73000 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.000000] ACPI: HPET 0xC7C733E0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] 7798MB HIGHMEM available. |
| [ 0.000000] 889MB LOWMEM available. |
| [ 0.000000] mapped low ram: 0 - 379fe000 |
| [ 0.000000] low ram: 0 - 379fe000 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] Normal [mem 0x01000000-0x379fdfff] |
| [ 0.000000] HighMem [mem 0x379fe000-0x1effffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xc7c53fff] |
| [ 0.000000] node 0: [mem 0x00000000-0x1effffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1effffff] |
| [ 0.000000] On node 0 totalpages: 1993714 |
| [ 0.000000] free_area_init_node: node 0, pgdat c16a9740, node_mem_map f0fb0024 |
| [ 0.000000] DMA zone: 36 pages used for memmap |
| [ 0.000000] DMA zone: 0 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] Normal zone: 1967 pages used for memmap |
| [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 |
| [ 0.000000] HighMem zone: 1765974 pages, LIFO batch:31 |
| [ 0.000000] Using APIC driver default |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77c9000 s40064 r0 d29568 u69632 |
| [ 0.000000] pcpu-alloc: s40064 r0 d29568 u69632 alloc=17*4096 |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991711 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-686-pae root=/dev/mapper/speicher-root ro init=/sbin/init drm_kms_helper.poll=0 drm.debug=0x06 log_buf_len=2M quiet noisapnp console=ttyS0,115200 console=tty0 pcie_aspm=force pcie_aspm.policy=powersave radeon.dpm=1 fsck.mode=skip |
| [ 0.000000] PCIe ASPM is forcibly enabled |
| [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.000000] Initializing CPU#0 |
| [ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000) |
| [ 0.000000] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.000000] Memory: 7867028K/7974856K available (4828K kernel code, 581K rwdata, 1484K rodata, 660K init, 468K bss, 107828K reserved, 0K cma-reserved, 7063896K highmem) |
| [ 0.000000] virtual kernel memory layout: |
| fixmap : 0xffd36000 - 0xfffff000 (2852 kB) |
| pkmap : 0xffa00000 - 0xffc00000 (2048 kB) |
| vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) |
| .init : 0xc16bf000 - 0xc1764000 ( 660 kB) |
| .data : 0xc14b76c6 - 0xc16bd500 (2071 kB) |
| .text : 0xc1000000 - 0xc14b76c6 (4829 kB) |
| [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 |
| [ 0.000000] CPU 0 irqstacks, hard=f702a000 soft=f702c000 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1599.894 MHz processor |
| [ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.78 BogoMIPS (lpj=6399576) |
| [ 0.000062] pid_max: default: 32768 minimum: 301 |
| [ 0.000080] ACPI: Core revision 20141107 |
| [ 0.006268] ACPI: All ACPI Tables successfully acquired |
| [ 0.006320] Security Framework initialized |
| [ 0.006339] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.006342] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.006376] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.006381] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.006765] Initializing cgroup subsys memory |
| [ 0.006776] Initializing cgroup subsys devices |
| [ 0.006783] Initializing cgroup subsys freezer |
| [ 0.006789] Initializing cgroup subsys net_cls |
| [ 0.006797] Initializing cgroup subsys blkio |
| [ 0.006802] Initializing cgroup subsys perf_event |
| [ 0.006808] Initializing cgroup subsys net_prio |
| [ 0.006850] CPU: Physical Processor ID: 0 |
| [ 0.006853] CPU: Processor Core ID: 0 |
| [ 0.006859] mce: CPU supports 6 MCE banks |
| [ 0.006879] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.007167] Freeing SMP alternatives memory: 20K (c1764000 - c1769000) |
| [ 0.009208] ftrace: allocating 21223 entries in 42 pages |
| [ 0.028593] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.029068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.068756] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) |
| [ 0.176349] Performance Events: AMD PMU driver. |
| [ 0.176359] ... version: 0 |
| [ 0.176362] ... bit width: 48 |
| [ 0.176364] ... generic registers: 4 |
| [ 0.176367] ... value mask: 0000ffffffffffff |
| [ 0.176370] ... max period: 00007fffffffffff |
| [ 0.176373] ... fixed-purpose events: 0 |
| [ 0.176375] ... event mask: 000000000000000f |
| [ 0.177422] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.177604] CPU 1 irqstacks, hard=f7128000 soft=f712a000 |
| [ 0.177608] x86: Booting SMP configuration: |
| [ 0.177611] .... node #0, CPUs: #1 |
| [ 0.188614] Initializing CPU#1 |
| [ 0.190816] x86: Booted up 1 node, 2 CPUs |
| [ 0.190821] smpboot: Total of 2 processors activated (6399.57 BogoMIPS) |
| [ 0.191793] devtmpfs: initialized |
| [ 0.192851] pinctrl core: initialized pinctrl subsystem |
| [ 0.193129] NET: Registered protocol family 16 |
| [ 0.203148] cpuidle: using governor ladder |
| [ 0.212576] cpuidle: using governor menu |
| [ 0.212978] ACPI: bus type PCI registered |
| [ 0.212984] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.213387] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. |
| [ 0.213391] bios32_service(0x49435024): not present |
| [ 0.213394] PCI: Using configuration type 1 for base access |
| [ 0.213397] PCI: Using configuration type 1 for extended access |
| [ 0.224581] ACPI: Added _OSI(Module Device) |
| [ 0.224589] ACPI: Added _OSI(Processor Device) |
| [ 0.224593] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.224596] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.226778] ACPI: Executed 3 blocks of module-level executable AML code |
| [ 0.231305] ACPI: Interpreter enabled |
| [ 0.231328] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) |
| [ 0.231354] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.231358] ACPI: Using IOAPIC for interrupt routing |
| [ 0.231390] HEST: Table parsing has been initialized. |
| [ 0.231397] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.238409] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.238424] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.238580] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.239150] PCI host bridge to bus 0000:00 |
| [ 0.239158] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.239163] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.239168] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.239172] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.239177] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.239194] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.239399] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.239419] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.239430] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.239441] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.239513] pci 0000:00:01.0: supports D1 D2 |
| [ 0.239601] pci 0000:00:01.0: System wakeup disabled by ACPI |
| [ 0.239693] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.239710] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.239793] pci 0000:00:01.1: supports D1 D2 |
| [ 0.239878] pci 0000:00:01.1: System wakeup disabled by ACPI |
| [ 0.240068] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.240096] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.240111] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.240126] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.240140] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.240154] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.240169] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.240433] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.240454] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.240612] pci 0000:00:12.0: System wakeup disabled by ACPI |
| [ 0.240776] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.240804] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.240920] pci 0000:00:12.2: supports D1 D2 |
| [ 0.240924] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.241014] pci 0000:00:12.2: System wakeup disabled by ACPI |
| [ 0.241177] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.241198] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.241355] pci 0000:00:13.0: System wakeup disabled by ACPI |
| [ 0.241469] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.241497] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.241613] pci 0000:00:13.2: supports D1 D2 |
| [ 0.241617] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.241706] pci 0000:00:13.2: System wakeup disabled by ACPI |
| [ 0.241870] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.242180] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.242211] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.242306] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.242472] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.242776] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.242908] pci 0000:00:14.4: System wakeup disabled by ACPI |
| [ 0.243064] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.243085] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.243243] pci 0000:00:14.5: System wakeup disabled by ACPI |
| [ 0.243405] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.243516] pci 0000:00:15.0: supports D1 D2 |
| [ 0.243610] pci 0000:00:15.0: System wakeup disabled by ACPI |
| [ 0.243768] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.243886] pci 0000:00:15.1: supports D1 D2 |
| [ 0.243980] pci 0000:00:15.1: System wakeup disabled by ACPI |
| [ 0.244140] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.244329] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.244500] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.244681] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.244874] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.245044] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.245217] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.245389] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.245830] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.245845] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.245850] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| [ 0.245855] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.245859] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.246040] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.246258] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.246288] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.246329] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.246355] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.246492] pci 0000:03:00.0: supports D1 D2 |
| [ 0.246496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.252582] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.252603] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.252618] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.252660] pci_bus 0000:00: on NUMA node 0 |
| [ 0.253649] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.253893] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254065] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254241] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254416] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254515] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| [ 0.254608] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254706] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.254969] ACPI: Enabled 6 GPEs in block 00 to 1F |
| [ 0.255444] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| [ 0.255455] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.255466] vgaarb: loaded |
| [ 0.255469] vgaarb: bridge control possible 0000:00:01.0 |
| [ 0.255795] PCI: Using ACPI for IRQ routing |
| [ 0.255808] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.255968] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.255973] e820: reserve RAM buffer [mem 0xc7c54000-0xc7ffffff] |
| [ 0.255977] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| [ 0.256458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.256466] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.258628] Switched to clocksource hpet |
| [ 0.270795] pnp: PnP ACPI init |
| [ 0.271278] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.271577] pnp: PnP ACPI: found 1 devices |
| [ 0.271586] PnPBIOS: Disabled by ACPI PNP |
| [ 0.317320] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.317346] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.317363] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.317370] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.317382] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.317394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.317399] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.317403] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.317408] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.317413] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| [ 0.317417] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] |
| [ 0.317421] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.317425] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.317430] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.317434] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.317581] NET: Registered protocol family 2 |
| [ 0.318030] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.318070] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.318119] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.318165] TCP: reno registered |
| [ 0.318170] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.318184] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.318379] NET: Registered protocol family 1 |
| [ 0.318415] pci 0000:00:01.0: Video device with shadowed ROM |
| [ 0.432180] PCI: CLS 64 bytes, default 64 |
| [ 0.432302] Unpacking initramfs... |
| [ 1.157236] Freeing initrd memory: 18376K (f5c0c000 - f6dfe000) |
| [ 1.158058] microcode: CPU0: patch_level=0x05000119 |
| [ 1.158078] microcode: CPU1: patch_level=0x05000119 |
| [ 1.158413] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.158433] LVT offset 0 assigned for vector 0x400 |
| [ 1.158563] perf: AMD IBS detected (0x000000ff) |
| [ 1.159601] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 1.159728] audit: initializing netlink subsys (disabled) |
| [ 1.159764] audit: type=2000 audit(1457469011.048:1): initialized |
| [ 1.160522] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.160564] zpool: loaded |
| [ 1.160917] VFS: Disk quotas dquot_6.5.2 |
| [ 1.161032] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 1.162839] alg: No test for stdrng (krng) |
| [ 1.162897] bounce: pool size: 64 pages |
| [ 1.163026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.163161] io scheduler noop registered |
| [ 1.163168] io scheduler deadline registered |
| [ 1.163187] io scheduler cfq registered (default) |
| [ 1.164421] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt |
| [ 1.164429] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded |
| [ 1.164466] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt |
| [ 1.164471] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.164478] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded |
| [ 1.164494] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.164534] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.164648] GHES: Failed to enable APEI firmware first mode. |
| [ 1.164660] isapnp: ISA Plug & Play support disabled |
| [ 1.165004] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.185740] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.187340] Linux agpgart interface v0.103 |
| [ 1.187755] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 1.191685] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.191706] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.192524] mousedev: PS/2 mouse device common for all mice |
| [ 1.192740] rtc_cmos 00:00: RTC can wake from S4 |
| [ 1.193126] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| [ 1.193168] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 1.193196] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.193513] TCP: cubic registered |
| [ 1.193685] NET: Registered protocol family 10 |
| [ 1.194189] mip6: Mobile IPv6 |
| [ 1.194202] NET: Registered protocol family 17 |
| [ 1.194212] mpls_gso: MPLS GSO support |
| [ 1.194797] Using IPI No-Shortcut mode |
| [ 1.195538] registered taskstats version 1 |
| [ 1.196465] rtc_cmos 00:00: setting system clock to 2016-03-08 20:30:11 UTC (1457469011) |
| [ 1.196577] PM: Hibernation image not present or could not be loaded. |
| [ 1.197127] Freeing unused kernel memory: 660K (c16bf000 - c1764000) |
| [ 1.197287] Write protecting the kernel text: 4832k |
| [ 1.197425] Write protecting the kernel read-only data: 1488k |
| [ 1.197427] NX-protecting the kernel data: 3360k |
| [ 1.345543] systemd-udevd[66]: starting version 215 |
| [ 1.346517] random: systemd-udevd urandom read with 0 bits of entropy available |
| [ 1.365352] ACPI: bus type USB registered |
| [ 1.365425] usbcore: registered new interface driver usbfs |
| [ 1.365451] usbcore: registered new interface driver hub |
| [ 1.370020] usbcore: registered new device driver usb |
| [ 1.371047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.372275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.372665] ehci-pci: EHCI PCI platform driver |
| [ 1.373076] QUIRK: Enable AMD PLL fix |
| [ 1.373118] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 1.373133] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 1.373146] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 1.373232] ehci-pci 0000:00:12.2: debug port 1 |
| [ 1.373300] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 1.376157] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| [ 1.376277] sp5100_tco: PCI Revision ID: 0x42 |
| [ 1.376391] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address |
| [ 1.376405] sp5100_tco: Last reboot was not triggered by watchdog. |
| [ 1.377227] sp5100_tco: initialized (0xf8212b00). heartbeat=60 sec (nowayout=0) |
| [ 1.378569] SCSI subsystem initialized |
| [ 1.382323] libata version 3.00 loaded. |
| [ 1.382758] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 1.382907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.382912] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.382916] usb usb1: Product: EHCI Host Controller |
| [ 1.382921] usb usb1: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd |
| [ 1.382924] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 1.383219] hub 1-0:1.0: USB hub found |
| [ 1.383238] hub 1-0:1.0: 5 ports detected |
| [ 1.384036] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 1.384052] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 1.384062] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 1.384157] ehci-pci 0000:00:13.2: debug port 1 |
| [ 1.384214] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 1.387087] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.387096] ACPI: Thermal Zone [TZ00] (37 C) |
| [ 1.394677] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 1.394821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.394827] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.394832] usb usb2: Product: EHCI Host Controller |
| [ 1.394836] usb usb2: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd |
| [ 1.394840] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 1.395176] hub 2-0:1.0: USB hub found |
| [ 1.395200] hub 2-0:1.0: 5 ports detected |
| [ 1.395618] ahci 0000:00:11.0: version 3.0 |
| [ 1.396119] ohci-pci: OHCI PCI platform driver |
| [ 1.396255] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 1.396263] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 1.399401] scsi host0: ahci |
| [ 1.401745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 1.402872] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8224000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26 |
| [ 1.402878] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 1.402890] scsi host1: ahci |
| [ 1.403207] scsi host2: ahci |
| [ 1.403439] scsi host3: ahci |
| [ 1.411082] scsi host4: ahci |
| [ 1.411381] scsi host5: ahci |
| [ 1.411533] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 1.411540] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 1.411545] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 1.411550] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 1.411555] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 1.411559] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 1.412209] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 1.412228] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 1.412287] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 1.471176] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.471186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.471190] usb usb3: Product: OHCI PCI host controller |
| [ 1.471195] usb usb3: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| [ 1.471199] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 1.471786] hub 3-0:1.0: USB hub found |
| [ 1.471810] hub 3-0:1.0: 5 ports detected |
| [ 1.472440] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 1.472453] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 1.472501] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 1.531082] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.531092] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.531096] usb usb4: Product: OHCI PCI host controller |
| [ 1.531101] usb usb4: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| [ 1.531105] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 1.531718] hub 4-0:1.0: USB hub found |
| [ 1.531743] hub 4-0:1.0: 5 ports detected |
| [ 1.532373] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 1.532387] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 1.532441] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 1.591098] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.591107] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.591112] usb usb5: Product: OHCI PCI host controller |
| [ 1.591116] usb usb5: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| [ 1.591120] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 1.591729] hub 5-0:1.0: USB hub found |
| [ 1.591754] hub 5-0:1.0: 2 ports detected |
| [ 1.731048] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 1.735014] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.739024] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 1.739074] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 1.739116] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 1.763028] usb 2-2: new high-speed USB device number 3 using ehci-pci |
| [ 1.866969] usb 4-1: new low-speed USB device number 2 using ohci-pci |
| [ 1.898909] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 1.910885] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.912436] usb 2-2: New USB device found, idVendor=148f, idProduct=2870 |
| [ 1.912452] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.912458] usb 2-2: Product: 802.11 n WLAN |
| [ 1.912462] usb 2-2: Manufacturer: Ralink |
| [ 1.916871] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100 |
| [ 1.916881] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 1.923755] ata4.00: configured for UDMA/100 |
| [ 1.926472] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 |
| [ 1.934023] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) |
| [ 1.934033] sd 3:0:0:0: [sda] 4096-byte physical blocks |
| [ 1.934132] sd 3:0:0:0: [sda] Write Protect is off |
| [ 1.934138] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.934180] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.946805] sda: sda1 sda2 |
| [ 1.948266] sd 3:0:0:0: [sda] Attached SCSI disk |
| [ 1.949488] sd 3:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.039117] usb 4-1: New USB device found, idVendor=046d, idProduct=c312 |
| [ 2.039126] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.039131] usb 4-1: Product: USB Multimedia Keyboard |
| [ 2.039135] usb 4-1: Manufacturer: LITEON Technology |
| [ 2.043554] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.049442] usbcore: registered new interface driver usbhid |
| [ 2.049449] usbhid: USB HID core driver |
| [ 2.051914] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:046D:C312.0001/input/input2 |
| [ 2.064373] usb 3-2: New USB device found, idVendor=1241, idProduct=1122 |
| [ 2.064384] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.073822] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0002/input/input3 |
| [ 2.107526] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0 |
| [ 2.107591] hid-generic 0003:1241:1122.0002: input,hidraw1: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 2.154937] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| [ 2.249762] md: bind<sda2> |
| [ 2.253408] md: raid1 personality registered for level 1 |
| [ 2.254012] md/raid1:md1: active with 1 out of 2 mirrors |
| [ 2.254061] md1: detected capacity change from 0 to 1999886286848 |
| [ 2.255325] md: bind<sda1> |
| [ 2.255337] md1: unknown partition table |
| [ 2.259754] md/raid1:md0: active with 1 out of 2 mirrors |
| [ 2.259814] md0: detected capacity change from 0 to 509804544 |
| [ 2.262027] md0: unknown partition table |
| [ 2.357043] device-mapper: uevent: version 1.0.3 |
| [ 2.357201] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com |
| [ 3.155320] Switched to clocksource tsc |
| [ 5.431283] random: nonblocking pool is initialized |
| [ 13.140242] NET: Registered protocol family 38 |
| [ 26.898670] raid6: mmxx1 604 MB/s |
| [ 26.966645] raid6: mmxx2 1042 MB/s |
| [ 27.034712] raid6: sse1x1 602 MB/s |
| [ 27.102705] raid6: sse1x2 1001 MB/s |
| [ 27.170699] raid6: sse2x1 1021 MB/s |
| [ 27.238685] raid6: sse2x2 1458 MB/s |
| [ 27.238688] raid6: using algorithm sse2x2 (1458 MB/s) |
| [ 27.238691] raid6: using ssse3x1 recovery algorithm |
| [ 27.239411] xor: measuring software checksum speed |
| [ 27.278613] pIII_sse : 3226.000 MB/sec |
| [ 27.318612] prefetch64-sse: 3445.000 MB/sec |
| [ 27.318616] xor: using function: prefetch64-sse (3445.000 MB/sec) |
| [ 27.394575] Btrfs loaded |
| [ 28.337965] PM: Starting manual resume from disk |
| [ 28.337979] PM: Hibernation image partition 253:2 present |
| [ 28.337982] PM: Looking for hibernation image. |
| [ 28.338591] PM: Image not found (code -22) |
| [ 28.338605] PM: Hibernation image not present or could not be loaded. |
| [ 29.116340] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem |
| [ 29.151981] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 30.307124] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem |
| [ 30.348262] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) |
| [ 32.295544] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) |
| [ 32.295886] systemd[1]: Detected architecture x86. |
| [ 32.309446] systemd[1]: Set hostname to <mattotaupa>. |
| [ 34.392985] systemd-sysv-generator[319]: Overwriting existing symlink /run/systemd/generator.late/console-setup.service with real service. |
| [ 34.393887] systemd-sysv-generator[319]: Overwriting existing symlink /run/systemd/generator.late/keyboard-setup.service with real service. |
| [ 34.500692] systemd[1]: rpcbind.target: Dependency Before=rpcbind.target dropped |
| [ 34.881344] systemd[1]: usr.mount: Unit is bound to inactive unit dev-mapper-speicher\x2dusr.device. Stopping, too. |
| [ 34.885589] systemd[1]: Created slice System Slice. |
| [ 34.886085] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 34.886183] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 34.886421] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 34.886509] systemd[1]: Listening on LVM2 metadata daemon socket. |
| [ 34.886589] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 34.886792] systemd[1]: Created slice User and Session Slice. |
| [ 34.886827] systemd[1]: Reached target Slices. |
| [ 34.886896] systemd[1]: Listening on udev Kernel Socket. |
| [ 34.887082] systemd[1]: Created slice system-tor.slice. |
| [ 34.887141] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 34.887325] systemd[1]: Created slice system-getty.slice. |
| [ 34.887436] systemd[1]: Listening on Journal Socket. |
| [ 34.888505] systemd[1]: Mounting Debug File System... |
| [ 34.889973] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| [ 35.123658] systemd[1]: Mounting Huge Pages File System... |
| [ 35.124967] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 35.125256] systemd[1]: Listening on Journal Audit Socket. |
| [ 35.126454] systemd[1]: Starting LSB: Set keymap... |
| [ 35.126704] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 35.126950] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 35.127089] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 35.127133] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 35.127250] systemd[1]: Listening on udev Control Socket. |
| [ 35.127299] systemd[1]: Reached target User and Group Name Lookups. |
| [ 35.127660] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| [ 35.127706] systemd[1]: Reached target Remote File Systems. |
| [ 35.127875] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 35.129015] systemd[1]: Starting LSB: setup for pidentd... |
| [ 35.132895] systemd[1]: Listening on Process Core Dump Socket. |
| [ 35.207702] systemd[1]: Starting Load Kernel Modules... |
| [ 35.209105] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 35.342988] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. |
| [ 35.344136] systemd[1]: Mounting Temporary Directory... |
| [ 35.344300] systemd[1]: Listening on Syslog Socket. |
| [ 35.345778] systemd[1]: Starting Journal Service... |
| [ 35.346115] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 35.470004] systemd[1]: Mounted Debug File System. |
| [ 35.470104] systemd[1]: Mounted Huge Pages File System. |
| [ 35.470151] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 35.470198] systemd[1]: Mounted Temporary Directory. |
| [ 35.514939] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 35.517106] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 35.742912] loop: module loaded |
| [ 35.778447] systemd[1]: Started LVM2 metadata daemon. |
| [ 35.992512] nct6775: Found NCT6775F or compatible chip at 0x2e:0x290 |
| [ 35.995018] systemd[1]: Started Load Kernel Modules. |
| [ 35.996485] systemd[1]: Starting Apply Kernel Variables... |
| [ 36.337145] systemd[1]: Started Journal Service. |
| [ 39.352948] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 39.352966] EXT4-fs (dm-3): re-mounted. Opts: (null) |
| [ 40.058736] ACPI: acpi_idle registered with cpuidle |
| [ 40.288997] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 40.508743] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 |
| [ 40.508758] ACPI: Power Button [PWRB] |
| [ 40.508894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 |
| [ 40.508900] ACPI: Power Button [PWRF] |
| [ 40.929838] piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 already in use! |
| [ 40.938532] piix4_smbus: probe of 0000:00:14.0 failed with error -16 |
| [ 41.006428] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 41.090290] [drm] Initialized drm 1.1.0 20060810 |
| [ 41.277863] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 |
| [ 41.365241] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 41.365820] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 41.365826] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 41.365831] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 41.365835] sound hdaudioC1D0: mono: mono_out=0x0 |
| [ 41.365840] sound hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 41.365843] sound hdaudioC1D0: inputs: |
| [ 41.365849] sound hdaudioC1D0: Rear Mic=0x18 |
| [ 41.365854] sound hdaudioC1D0: Front Mic=0x19 |
| [ 41.365858] sound hdaudioC1D0: Line=0x1a |
| [ 41.365862] sound hdaudioC1D0: CD=0x1c |
| [ 41.389998] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input7 |
| [ 41.390891] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 41.390970] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 41.391049] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 41.391126] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 41.391204] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 41.391285] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| [ 41.391361] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 |
| [ 41.391441] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 |
| [ 41.541552] r8169 0000:03:00.0 eth6: renamed from eth0 |
| [ 42.146860] kvm: Nested Virtualization enabled |
| [ 42.146873] kvm: Nested Paging enabled |
| [ 42.528048] [drm] radeon kernel modesetting enabled. |
| [ 42.893236] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). |
| [ 42.893298] [drm] register mmio base: 0xF0100000 |
| [ 42.893304] [drm] register mmio size: 262144 |
| [ 42.893410] ATOM BIOS: AMD |
| [ 42.893522] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 42.893533] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 42.893540] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 42.893546] [drm] RAM width 32bits DDR |
| [ 42.893728] [TTM] Zone kernel: Available graphics memory: 411094 kiB |
| [ 42.893736] [TTM] Zone highmem: Available graphics memory: 3943042 kiB |
| [ 42.893741] [TTM] Initializing pool allocator |
| [ 42.893761] [TTM] Initializing DMA pool allocator |
| [ 42.893831] [drm] radeon: 384M of VRAM memory ready |
| [ 42.893838] [drm] radeon: 1024M of GTT memory ready. |
| [ 42.893881] [drm] Loading PALM Microcode |
| [ 43.144742] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin |
| [ 43.288236] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin |
| [ 43.290519] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin |
| [ 43.290550] [drm] Internal thermal controller without fan control |
| [ 43.290819] == power state 0 == |
| [ 43.290826] ui class: none |
| [ 43.290833] internal class: uvd_hd |
| [ 43.290840] caps: |
| [ 43.290846] uvd vclk: 40000 dclk: 30477 |
| [ 43.290853] power level 0 sclk: 27827 vddc: 850 |
| [ 43.290857] status: |
| [ 43.290863] == power state 1 == |
| [ 43.290867] ui class: none |
| [ 43.290871] internal class: uvd |
| [ 43.290877] caps: |
| [ 43.290882] uvd vclk: 53334 dclk: 40000 |
| [ 43.290888] power level 0 sclk: 49231 vddc: 925 |
| [ 43.290891] status: |
| [ 43.290896] == power state 2 == |
| [ 43.290900] ui class: performance |
| [ 43.290904] internal class: none |
| [ 43.290910] caps: |
| [ 43.290915] uvd vclk: 0 dclk: 0 |
| [ 43.290920] power level 0 sclk: 27827 vddc: 850 |
| [ 43.290925] power level 1 sclk: 49231 vddc: 925 |
| [ 43.290929] status: |
| [ 43.290933] == power state 3 == |
| [ 43.290937] ui class: none |
| [ 43.290941] internal class: boot |
| [ 43.290946] caps: |
| [ 43.290951] uvd vclk: 0 dclk: 0 |
| [ 43.290956] power level 0 sclk: 20000 vddc: 925 |
| [ 43.290960] status: c r b |
| [ 43.290968] == power state 4 == |
| [ 43.290972] ui class: none |
| [ 43.290976] internal class: thermal |
| [ 43.290981] caps: |
| [ 43.290987] uvd vclk: 0 dclk: 0 |
| [ 43.290992] power level 0 sclk: 17778 vddc: 850 |
| [ 43.290995] status: |
| [ 43.291003] [drm] Found smc ucode version: 0x00010601 |
| [ 43.291130] [drm] radeon: dpm initialized |
| [ 43.642552] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin |
| [ 43.642763] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 43.668811] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). |
| [ 43.669125] radeon 0000:00:01.0: WB enabled |
| [ 43.669133] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffb46c00 |
| [ 43.669139] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffb46c0c |
| [ 43.671055] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8cb2118 |
| [ 43.671061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 43.671063] [drm] Driver supports precise vblank timestamp query. |
| [ 43.671067] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 43.671123] radeon 0000:00:01.0: radeon: using MSI. |
| [ 43.671161] [drm] radeon: irq initialized. |
| [ 43.687667] [drm] ring test on 0 succeeded in 1 usecs |
| [ 43.687678] [drm] ring test on 3 succeeded in 3 usecs |
| [ 43.733468] [drm] ring test on 5 succeeded in 1 usecs |
| [ 43.753465] [drm] UVD initialized successfully. |
| [ 43.754526] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 43.754582] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 44.270914] [drm] ib test on ring 5 succeeded |
| [ 44.291680] [drm] Radeon Display Connectors |
| [ 44.291684] [drm] Connector 0: |
| [ 44.291687] [drm] HDMI-A-1 |
| [ 44.291690] [drm] HPD1 |
| [ 44.291694] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 44.291697] [drm] Encoders: |
| [ 44.291700] [drm] DFP1: INTERNAL_UNIPHY |
| [ 44.291702] [drm] Connector 1: |
| [ 44.291704] [drm] HDMI-A-2 |
| [ 44.291706] [drm] HPD2 |
| [ 44.291710] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 44.291712] [drm] Encoders: |
| [ 44.291714] [drm] DFP2: INTERNAL_UNIPHY |
| [ 44.291716] [drm] Connector 2: |
| [ 44.291718] [drm] VGA-1 |
| [ 44.291722] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 44.291724] [drm] Encoders: |
| [ 44.291726] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 44.291787] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| [ 44.291794] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| [ 44.291799] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 |
| [ 44.291842] switching from power state: |
| [ 44.291845] ui class: none |
| [ 44.291848] internal class: boot |
| [ 44.291852] caps: |
| [ 44.291855] uvd vclk: 0 dclk: 0 |
| [ 44.291859] power level 0 sclk: 20000 vddc: 925 |
| [ 44.291860] status: c b |
| [ 44.291864] switching to power state: |
| [ 44.291866] ui class: performance |
| [ 44.291869] internal class: none |
| [ 44.291872] caps: |
| [ 44.291874] uvd vclk: 0 dclk: 0 |
| [ 44.291877] power level 0 sclk: 27827 vddc: 850 |
| [ 44.291880] power level 1 sclk: 49231 vddc: 925 |
| [ 44.291882] status: r |
| [ 44.291965] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] |
| [ 44.293071] [drm:radeon_atombios_connected_scratch_regs] DFP1 disconnected |
| [ 44.293077] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] disconnected |
| [ 44.293081] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] |
| [ 44.294174] [drm:radeon_atombios_connected_scratch_regs] DFP2 disconnected |
| [ 44.294179] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] disconnected |
| [ 44.294182] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] |
| [ 44.326052] [drm:radeon_atombios_connected_scratch_regs] CRT1 connected |
| [ 44.326143] [drm:drm_edid_to_eld] ELD: no CEA Extension found |
| [ 44.326192] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] probed modes : |
| [ 44.326206] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| [ 44.326219] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| [ 44.326230] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 |
| [ 44.326242] [drm:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 |
| [ 44.326253] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa |
| [ 44.326264] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa |
| [ 44.326274] [drm:drm_mode_debug_printmodeline] Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa |
| [ 44.326285] [drm:drm_mode_debug_printmodeline] Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 |
| [ 44.326296] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 |
| [ 44.326306] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 |
| [ 44.326317] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 |
| [ 44.326327] [drm:drm_mode_debug_printmodeline] Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa |
| [ 44.326338] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa |
| [ 44.326348] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa |
| [ 44.326359] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa |
| [ 44.326370] [drm:drm_mode_debug_printmodeline] Modeline 29:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6 |
| [ 44.326380] [drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 |
| [ 44.326391] [drm:drm_mode_debug_printmodeline] Modeline 28:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6 |
| [ 44.326401] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6 |
| [ 44.326408] [drm:drm_setup_crtcs] |
| [ 44.326417] [drm:drm_enable_connectors] connector 20 enabled? no |
| [ 44.326423] [drm:drm_enable_connectors] connector 22 enabled? no |
| [ 44.326429] [drm:drm_enable_connectors] connector 24 enabled? yes |
| [ 44.326437] [drm:drm_target_preferred] looking for cmdline mode on connector 24 |
| [ 44.326444] [drm:drm_target_preferred] looking for preferred mode on connector 24 0 |
| [ 44.326450] [drm:drm_target_preferred] found mode 1280x1024 |
| [ 44.326456] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config |
| [ 44.326468] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 16 (0,0) |
| [ 44.334653] [drm] fb mappable at 0xE0478000 |
| [ 44.334658] [drm] vram apper at 0xE0000000 |
| [ 44.334661] [drm] size 5242880 |
| [ 44.334663] [drm] fb depth is 24 |
| [ 44.334666] [drm] pitch is 5120 |
| [ 44.334946] fbcon: radeondrmfb (fb0) is primary device |
| [ 44.335580] [drm:drm_crtc_helper_set_config] |
| [ 44.335584] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 44.335590] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set |
| [ 44.335593] [drm:drm_crtc_helper_set_config] modes are different, full mode set |
| [ 44.335599] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 |
| [ 44.335605] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| [ 44.335608] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch |
| [ 44.335610] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch |
| [ 44.335613] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 44.335616] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace |
| [ 44.335621] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| [ 44.335631] [drm:radeon_encoder_set_active_device] setting active device to 00000001 from 00000001 00000001 for encoder 4 |
| [ 44.335649] [drm:drm_crtc_helper_set_mode] [CRTC:16] |
| [ 44.335669] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| [ 44.335678] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| [ 44.335731] [drm:radeon_compute_pll_avivo] 135000 - 135000, pll dividers - fb: 21.6 ref: 2, post 8 |
| [ 44.350926] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) |
| [ 44.350943] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) |
| [ 44.350982] [drm:drm_crtc_helper_set_mode] [ENCODER:23:TV-23] set [MODE:45:1280x1024] |
| [ 44.350987] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001 |
| [ 44.351050] [drm:dce4_crtc_load_lut] 0 |
| [ 44.364373] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001 |
| [ 44.365137] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on |
| [ 44.365140] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] set DPMS on |
| [ 44.365145] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| [ 44.365154] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| [ 44.365175] [drm:drm_crtc_helper_set_config] |
| [ 44.365177] [drm:drm_crtc_helper_set_config] [CRTC:18] [NOFB] |
| [ 44.365179] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| [ 44.365183] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| [ 44.365246] [drm:drm_crtc_helper_set_config] |
| [ 44.365250] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 44.365260] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 44.365266] [drm:dce4_crtc_load_lut] 0 |
| [ 44.365300] [drm:dce4_crtc_load_lut] 0 |
| [ 44.376403] Console: switching to colour frame buffer device 160x64 |
| [ 44.376415] [drm:drm_crtc_helper_set_config] |
| [ 44.376417] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 44.376424] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 44.376429] [drm:dce4_crtc_load_lut] 0 |
| [ 44.376462] [drm:dce4_crtc_load_lut] 0 |
| [ 44.387365] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 44.387370] radeon 0000:00:01.0: registered panic notifier |
| [ 44.402380] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5 |
| [ 44.402401] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5 |
| [ 44.402418] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 44.928236] [drm:drm_crtc_helper_set_config] |
| [ 44.928240] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 44.928255] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 44.928264] [drm:dce4_crtc_load_lut] 0 |
| [ 44.928300] [drm:dce4_crtc_load_lut] 0 |
| [ 44.953934] [drm:drm_crtc_helper_set_config] |
| [ 44.953939] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 44.953955] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 44.953965] [drm:dce4_crtc_load_lut] 0 |
| [ 44.954005] [drm:dce4_crtc_load_lut] 0 |
| [ 45.775560] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k FS |
| [ 48.472379] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem |
| [ 48.736739] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended |
| [ 49.046552] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) |
| [ 49.180681] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem |
| [ 49.417048] SGI XFS with ACLs, security attributes, realtime, no debug enabled |
| [ 49.619385] XFS (dm-7): Mounting V4 Filesystem |
| [ 49.621054] XFS (dm-8): Mounting V4 Filesystem |
| [ 49.643539] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem |
| [ 49.944424] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) |
| [ 50.109969] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 55.994263] systemd-journald[339]: Received request to flush runtime journal from PID 1 |
| [ 58.854378] cfg80211: Calling CRDA to update world regulatory domain |
| [ 59.365905] XFS (dm-7): Ending clean mount |
| [ 59.387105] XFS (dm-8): Ending clean mount |
| [ 60.115175] usb 2-2: reset high-speed USB device number 3 using ehci-pci |
| [ 60.256893] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected |
| [ 60.311758] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected |
| [ 60.607650] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 60.608458] usbcore: registered new interface driver rt2800usb |
| [ 154.430294] Process accounting resumed |
| [ 169.055543] [drm:drm_crtc_helper_set_config] |
| [ 169.055548] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 169.055562] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 169.055572] [drm:dce4_crtc_load_lut] 0 |
| [ 169.055612] [drm:dce4_crtc_load_lut] 0 |
| [ 226.548882] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 226.737869] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 227.391438] Ebtables v2.0 registered |
| [ 233.983619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 233.983745] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| [ 234.020063] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin |
| [ 234.020096] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| [ 234.234387] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 234.388866] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 234.589133] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw |
| [ 234.726508] r8169 0000:03:00.0 eth6: link down |
| [ 234.726691] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 290.158427] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 290.314706] r8169 0000:03:00.0 eth6: link down |
| [ 290.314882] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 290.331413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 290.546981] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 380.614502] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 380.770561] r8169 0000:03:00.0 eth6: link down |
| [ 380.770762] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 380.788661] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 381.010480] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 471.158746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 471.378953] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 471.405956] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 471.558427] r8169 0000:03:00.0 eth6: link down |
| [ 471.558566] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 561.884773] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 562.038333] r8169 0000:03:00.0 eth6: link down |
| [ 562.038538] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 562.051267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 562.274008] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 652.394155] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 652.550465] r8169 0000:03:00.0 eth6: link down |
| [ 652.550640] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 652.566613] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 652.790447] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 743.155286] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 743.310116] r8169 0000:03:00.0 eth6: link down |
| [ 743.310281] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 743.324169] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 743.563917] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 824.394401] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 1, devices 00000001, active_devices 00000001 |
| [ 833.737693] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 833.894430] r8169 0000:03:00.0 eth6: link down |
| [ 833.894569] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 833.909139] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 834.126547] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 923.929148] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 924.146857] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 924.178313] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 924.334113] r8169 0000:03:00.0 eth6: link down |
| [ 924.334305] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1014.379738] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1014.538240] r8169 0000:03:00.0 eth6: link down |
| [ 1014.538499] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1014.555781] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1014.766065] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1104.865721] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1105.022178] r8169 0000:03:00.0 eth6: link down |
| [ 1105.022344] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1105.041205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1105.254551] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1195.366751] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1195.522040] r8169 0000:03:00.0 eth6: link down |
| [ 1195.522213] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1195.539966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1195.754430] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1285.849843] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1286.005847] r8169 0000:03:00.0 eth6: link down |
| [ 1286.006018] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1286.026856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1286.238196] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1376.645457] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1376.802179] r8169 0000:03:00.0 eth6: link down |
| [ 1376.802357] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1376.820063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1377.030058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1410.941466] [drm:dce4_crtc_load_lut] 0 |
| [ 1410.941524] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001 |
| [ 1410.941556] [drm:drm_crtc_helper_set_config] |
| [ 1410.941562] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1410.941582] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1410.941593] [drm:dce4_crtc_load_lut] 0 |
| [ 1410.941641] [drm:dce4_crtc_load_lut] 0 |
| [ 1410.963330] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.213624] [drm:drm_crtc_helper_set_config] |
| [ 1451.213633] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1451.213656] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1451.213707] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.213760] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.581589] [drm:drm_crtc_helper_set_config] |
| [ 1451.581595] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1451.581611] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1451.581621] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.581683] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.981613] [drm:drm_crtc_helper_set_config] |
| [ 1451.981622] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1451.981644] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1451.981693] [drm:dce4_crtc_load_lut] 0 |
| [ 1451.981747] [drm:dce4_crtc_load_lut] 0 |
| [ 1452.397620] [drm:drm_crtc_helper_set_config] |
| [ 1452.397629] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1452.397652] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1452.397703] [drm:dce4_crtc_load_lut] 0 |
| [ 1452.397755] [drm:dce4_crtc_load_lut] 0 |
| [ 1452.621622] [drm:drm_crtc_helper_set_config] |
| [ 1452.621632] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1452.621654] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1452.621715] [drm:dce4_crtc_load_lut] 0 |
| [ 1452.621768] [drm:dce4_crtc_load_lut] 0 |
| [ 1454.557620] [drm:drm_crtc_helper_set_config] |
| [ 1454.557630] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| [ 1454.557653] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| [ 1454.557701] [drm:dce4_crtc_load_lut] 0 |
| [ 1454.557753] [drm:dce4_crtc_load_lut] 0 |
| [ 1467.494951] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1467.649922] r8169 0000:03:00.0 eth6: link down |
| [ 1467.650074] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1467.666472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1467.898126] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1557.842557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1558.073732] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1558.103420] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1558.257670] r8169 0000:03:00.0 eth6: link down |
| [ 1558.257818] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1608.631469] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1608.813536] r8169 0000:03:00.0 eth6: link down |
| [ 1608.813790] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| [ 1608.829389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1609.051000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |