blob: 55dd7f83d66d193a89c1a45571c90505fabc8d5d [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-1) ) #1 SMP Debian 4.1.1-1~exp1 (2015-07-07)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1-58-gef21e77 07/18/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f6260-0x000f626f] mapped at [c00f6260]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] BRK [0x0182b000, 0x0182bfff] PGTABLE
[ 0.000000] BRK [0x0182c000, 0x0182dfff] PGTABLE
[ 0.000000] BRK [0x0182e000, 0x0182efff] PGTABLE
[ 0.000000] BRK [0x0182f000, 0x0182ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35f7c000-0x36fb5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6460 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000C7FBA860 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000C7FB8250 002610 (v02 ASROCK COREBOOT 00010001 INTL 20150619)
[ 0.000000] ACPI: FACS 0x00000000C7FB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000C7FBA9B0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000C7FBA9F0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000C7FBAA50 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FBAA80 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FBC110 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000C7FBC4F0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7798MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000021effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f9cfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 1994555
[ 0.000000] free_area_init_node: node 0, pgdat c16debc0, node_mem_map f1320024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1766815 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f79c6000 s45452 r0 d32372 u77824
[ 0.000000] pcpu-alloc: s45452 r0 d32372 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992552
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.0-trunk-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 processor.max_cstate=2
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 7873944K/7978220K available (5004K kernel code, 625K rwdata, 1488K rodata, 676K init, 468K bss, 104276K reserved, 0K cma-reserved, 7067260K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc16f7000 - 0xc17a0000 ( 676 kB)
.data : 0xc14e345a - 0xc16f54c0 (2120 kB)
.text : 0xc1000000 - 0xc14e345a (5005 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.983 MHz processor
[ 0.000057] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.96 BogoMIPS (lpj=6399932)
[ 0.000064] pid_max: default: 32768 minimum: 301
[ 0.000083] ACPI: Core revision 20150410
[ 0.006392] ACPI: All ACPI Tables successfully acquired
[ 0.006438] Security Framework initialized
[ 0.006458] AppArmor: AppArmor disabled by boot time parameter
[ 0.006461] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006496] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006502] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006886] Initializing cgroup subsys blkio
[ 0.006894] Initializing cgroup subsys memory
[ 0.006904] Initializing cgroup subsys devices
[ 0.006910] Initializing cgroup subsys freezer
[ 0.006917] Initializing cgroup subsys net_cls
[ 0.006923] Initializing cgroup subsys perf_event
[ 0.006929] Initializing cgroup subsys net_prio
[ 0.006968] CPU: Physical Processor ID: 0
[ 0.006971] CPU: Processor Core ID: 0
[ 0.006977] mce: CPU supports 6 MCE banks
[ 0.006996] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.006999] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.007343] Freeing SMP alternatives memory: 24K (c17a0000 - c17a6000)
[ 0.009737] ftrace: allocating 21713 entries in 43 pages
[ 0.029400] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029874] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.176510] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.176572] Performance Events: AMD PMU driver.
[ 0.176583] ... version: 0
[ 0.176586] ... bit width: 48
[ 0.176589] ... generic registers: 4
[ 0.176592] ... value mask: 0000ffffffffffff
[ 0.176595] ... max period: 00007fffffffffff
[ 0.176598] ... fixed-purpose events: 0
[ 0.176600] ... event mask: 000000000000000f
[ 0.177858] CPU 1 irqstacks, hard=f752e000 soft=f7530000
[ 0.177864] x86: Booting SMP configuration:
[ 0.177867] .... node #0, CPUs: #1
[ 0.188871] Initializing CPU#1
[ 0.191075] x86: Booted up 1 node, 2 CPUs
[ 0.191082] smpboot: Total of 2 processors activated (6399.93 BogoMIPS)
[ 0.191972] devtmpfs: initialized
[ 0.192795] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.192988] pinctrl core: initialized pinctrl subsystem
[ 0.193273] NET: Registered protocol family 16
[ 0.203410] cpuidle: using governor ladder
[ 0.212785] cpuidle: using governor menu
[ 0.213173] ACPI: bus type PCI registered
[ 0.213179] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.213590] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.213595] bios32_service(0x49435024): not present
[ 0.213598] PCI: Using configuration type 1 for base access
[ 0.213600] PCI: Using configuration type 1 for extended access
[ 0.224797] ACPI: Added _OSI(Module Device)
[ 0.224806] ACPI: Added _OSI(Processor Device)
[ 0.224809] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.224813] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.227142] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.231554] ACPI: Interpreter enabled
[ 0.231577] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.231605] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.231609] ACPI: Using IOAPIC for interrupt routing
[ 0.231641] HEST: Table parsing has been initialized.
[ 0.231648] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238552] ACPI: Power Resource [PFN0] (on)
[ 0.238962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.238975] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.239127] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.239638] PCI host bridge to bus 0000:00
[ 0.239646] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239652] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.239657] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.239661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.239666] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.239681] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.239889] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.239909] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.239920] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.239931] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.239996] pci 0000:00:01.0: supports D1 D2
[ 0.240083] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.240174] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.240192] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.240267] pci 0000:00:01.1: supports D1 D2
[ 0.240352] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.240550] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.240576] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.240591] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.240606] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.240621] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.240636] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.240651] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.240923] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.240944] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.241104] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.241223] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.241248] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
[ 0.241353] pci 0000:00:12.2: supports D1 D2
[ 0.241357] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.241446] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.241608] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.241629] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.241789] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.241948] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.241974] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
[ 0.242079] pci 0000:00:13.2: supports D1 D2
[ 0.242083] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.242171] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.242303] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.242615] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.242646] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.242735] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.242968] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.243216] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.243349] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.243502] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.243523] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.243684] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.243846] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.243938] pci 0000:00:15.0: supports D1 D2
[ 0.244031] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.244182] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.244281] pci 0000:00:15.1: supports D1 D2
[ 0.244371] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.244541] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.244722] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.244895] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.245067] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.245251] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.245421] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.245593] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.245764] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.246125] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.246141] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.246146] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.246151] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246155] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246252] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.246374] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.246404] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.246445] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.246471] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.246588] pci 0000:03:00.0: supports D1 D2
[ 0.246592] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252819] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.252837] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.252851] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.252895] pci_bus 0000:00: on NUMA node 0
[ 0.253739] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.253982] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254157] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254255] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254351] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254448] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.254540] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254636] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254989] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.255448] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.255458] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.255470] vgaarb: loaded
[ 0.255474] vgaarb: bridge control possible 0000:00:01.0
[ 0.255816] PCI: Using ACPI for IRQ routing
[ 0.255828] PCI: pci_cache_line_size set to 64 bytes
[ 0.255989] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.255995] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
[ 0.255998] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.256448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.256458] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.258645] Switched to clocksource hpet
[ 0.272295] pnp: PnP ACPI init
[ 0.272778] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.273071] pnp: PnP ACPI: found 1 devices
[ 0.273078] PnPBIOS: Disabled by ACPI PNP
[ 0.317705] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.317770] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.317791] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.317809] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.317816] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.317829] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.317841] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.317846] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.317851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317855] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.317861] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.317865] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.317869] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.317873] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.317878] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.317882] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.318059] NET: Registered protocol family 2
[ 0.318505] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.318546] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.318596] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.318729] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318745] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.319048] NET: Registered protocol family 1
[ 0.319085] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.376951] PCI: CLS 64 bytes, default 64
[ 0.377082] Unpacking initramfs...
[ 1.038179] Freeing initrd memory: 16616K (f5f7c000 - f6fb6000)
[ 1.038620] microcode: CPU0: patch_level=0x05000119
[ 1.038724] microcode: CPU1: patch_level=0x05000119
[ 1.038911] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.038922] LVT offset 0 assigned for vector 0x400
[ 1.038955] perf: AMD IBS detected (0x000000ff)
[ 1.039755] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.039879] audit: initializing netlink subsys (disabled)
[ 1.039919] audit: type=2000 audit(1437240406.928:1): initialized
[ 1.040882] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.040925] zpool: loaded
[ 1.041321] VFS: Disk quotas dquot_6.6.0
[ 1.041442] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.042937] alg: No test for stdrng (krng)
[ 1.042996] bounce: pool size: 64 pages
[ 1.043126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.043257] io scheduler noop registered
[ 1.043264] io scheduler deadline registered
[ 1.043283] io scheduler cfq registered (default)
[ 1.044514] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.044524] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.044560] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.044565] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.044573] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.044588] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.044628] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.044748] GHES: Failed to enable APEI firmware first mode.
[ 1.044760] isapnp: ISA Plug & Play support disabled
[ 1.045109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.065843] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.067566] Linux agpgart interface v0.103
[ 1.068389] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.072066] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.072089] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.072942] mousedev: PS/2 mouse device common for all mice
[ 1.073174] rtc_cmos 00:00: RTC can wake from S4
[ 1.073621] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.073736] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.073780] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.074324] NET: Registered protocol family 10
[ 1.074920] mip6: Mobile IPv6
[ 1.074936] NET: Registered protocol family 17
[ 1.074948] mpls_gso: MPLS GSO support
[ 1.075491] Using IPI No-Shortcut mode
[ 1.076157] registered taskstats version 1
[ 1.076939] rtc_cmos 00:00: setting system clock to 2015-07-18 17:26:47 UTC (1437240407)
[ 1.077037] PM: Hibernation image not present or could not be loaded.
[ 1.077677] Freeing unused kernel memory: 676K (c16f7000 - c17a0000)
[ 1.077923] Write protecting the kernel text: 5008k
[ 1.078063] Write protecting the kernel read-only data: 1492k
[ 1.078066] NX-protecting the kernel data: 3184k
[ 1.172448] systemd-udevd[66]: starting version 215
[ 1.173216] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.192135] SCSI subsystem initialized
[ 1.202515] ACPI: bus type USB registered
[ 1.202594] usbcore: registered new interface driver usbfs
[ 1.202622] usbcore: registered new interface driver hub
[ 1.203882] usbcore: registered new device driver usb
[ 1.205013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.205433] ehci-pci: EHCI PCI platform driver
[ 1.205869] QUIRK: Enable AMD PLL fix
[ 1.205912] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.205927] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.205938] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.206022] ehci-pci 0000:00:12.2: debug port 1
[ 1.206093] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
[ 1.206339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.207241] libata version 3.00 loaded.
[ 1.214768] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.214907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.214913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.214918] usb usb1: Product: EHCI Host Controller
[ 1.214922] usb usb1: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
[ 1.214926] usb usb1: SerialNumber: 0000:00:12.2
[ 1.215380] hub 1-0:1.0: USB hub found
[ 1.215400] hub 1-0:1.0: 5 ports detected
[ 1.216123] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.216140] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.216149] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.216164] ehci-pci 0000:00:13.2: debug port 1
[ 1.216217] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
[ 1.225146] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.225155] ACPI: Thermal Zone [TZ00] (40 C)
[ 1.227312] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.228290] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8252000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
[ 1.228297] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.228429] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.228560] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.228565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228570] usb usb2: Product: EHCI Host Controller
[ 1.228574] usb usb2: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
[ 1.228578] usb usb2: SerialNumber: 0000:00:13.2
[ 1.228921] hub 2-0:1.0: USB hub found
[ 1.228940] hub 2-0:1.0: 5 ports detected
[ 1.229730] ahci 0000:00:11.0: version 3.0
[ 1.230225] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.230232] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.233037] ohci-pci: OHCI PCI platform driver
[ 1.241507] scsi host0: ahci
[ 1.242152] scsi host1: ahci
[ 1.242594] scsi host2: ahci
[ 1.242975] scsi host3: ahci
[ 1.243494] scsi host4: ahci
[ 1.243682] scsi host5: ahci
[ 1.243810] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.243816] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.243822] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.243827] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.243832] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.243837] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.244589] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.244606] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.244670] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 1.303108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.303117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.303122] usb usb3: Product: OHCI PCI host controller
[ 1.303126] usb usb3: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
[ 1.303130] usb usb3: SerialNumber: 0000:00:12.0
[ 1.303565] hub 3-0:1.0: USB hub found
[ 1.303583] hub 3-0:1.0: 5 ports detected
[ 1.304271] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.304285] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.304326] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 1.363102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.363112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.363117] usb usb4: Product: OHCI PCI host controller
[ 1.363121] usb usb4: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
[ 1.363125] usb usb4: SerialNumber: 0000:00:13.0
[ 1.363767] hub 4-0:1.0: USB hub found
[ 1.363793] hub 4-0:1.0: 5 ports detected
[ 1.364456] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.364469] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.364517] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 1.423216] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.423226] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.423231] usb usb5: Product: OHCI PCI host controller
[ 1.423235] usb usb5: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
[ 1.423239] usb usb5: SerialNumber: 0000:00:14.5
[ 1.423851] hub 5-0:1.0: USB hub found
[ 1.423877] hub 5-0:1.0: 2 ports detected
[ 1.539074] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.563038] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.571052] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.571106] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.575044] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.575100] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.688841] usb 2-1: New USB device found, idVendor=148f, idProduct=2870
[ 1.688852] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.688857] usb 2-1: Product: 802.11 n WLAN
[ 1.688861] usb 2-1: Manufacturer: Ralink
[ 1.731063] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.742970] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.743809] ata3.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[ 1.743819] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.744404] ata3.00: configured for UDMA/100
[ 1.745029] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
[ 1.757573] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.757725] sd 2:0:0:0: [sda] Write Protect is off
[ 1.757732] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.757780] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758560] sda: sda1 sda2
[ 1.760214] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.761808] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.897483] usb 3-1: New USB device found, idVendor=1241, idProduct=1122
[ 1.897493] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.035059] usb 3-2: new low-speed USB device number 3 using ohci-pci
[ 2.035152] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 2.035161] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
[ 2.207250] usb 3-2: New USB device found, idVendor=046d, idProduct=c312
[ 2.207267] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.207276] usb 3-2: Product: USB Multimedia Keyboard
[ 2.207284] usb 3-2: Manufacturer: LITEON Technology
[ 2.212909] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.226559] usbcore: registered new interface driver usbhid
[ 2.226567] usbhid: USB HID core driver
[ 2.228788] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1241:1122.0001/input/input2
[ 2.228972] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-1/input0
[ 2.229410] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C312.0002/input/input3
[ 2.283350] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-2/input0
[ 2.306985] device-mapper: uevent: version 1.0.3
[ 2.307144] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[ 3.035296] Switched to clocksource tsc
[ 7.436323] NET: Registered protocol family 38
[ 7.791689] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.461833] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 8.461970] systemd[1]: Found ordering cycle on basic.target/start
[ 8.461978] systemd[1]: Found dependency on sysinit.target/start
[ 8.461986] systemd[1]: Found dependency on rpcbind.service/start
[ 8.461994] systemd[1]: Found dependency on network-online.target/start
[ 8.462000] systemd[1]: Found dependency on network.target/start
[ 8.462006] systemd[1]: Found dependency on systemd-networkd.service/start
[ 8.462013] systemd[1]: Found dependency on dbus.service/start
[ 8.462018] systemd[1]: Found dependency on basic.target/start
[ 8.462025] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[ 8.462033] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[ 8.748330] random: nonblocking pool is initialized
[ 9.622442] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 9.766358] lp: driver loaded but no devices found
[ 9.780324] ppdev: user-space parallel port driver
[ 9.790124] parport0: PC-style at 0x378 [PCSPP,EPP]
[ 9.790140] parport0: irq 0 detected
[ 9.818958] systemd-udevd[247]: starting version 215
[ 9.887029] lp0: using parport0 (polling).
[ 9.901606] fuse init (API version 7.23)
[ 9.924731] w83627ehf: Found NCT6775F chip at 0x290
[ 10.090513] ACPI: processor limited to max C-state 2
[ 10.090561] ACPI: acpi_idle registered with cpuidle
[ 10.104817] acpi-cpufreq: overriding BIOS provided _PSD data
[ 10.178027] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 10.178041] ACPI: Power Button [PWRB]
[ 10.178155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.178161] ACPI: Power Button [PWRF]
[ 10.179071] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20150410/utaddress-254)
[ 10.179090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.181408] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 10.181533] sp5100_tco: PCI Revision ID: 0x42
[ 10.181648] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 10.181662] sp5100_tco: Last reboot was not triggered by watchdog.
[ 10.181767] sp5100_tco: initialized (0xf82ecb00). heartbeat=60 sec (nowayout=0)
[ 10.214762] [drm] Initialized drm 1.1.0 20060810
[ 10.272887] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 10.274840] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.351711] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 10.352291] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 10.352297] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.352307] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 10.352311] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 10.352316] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 10.352320] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 10.352325] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 10.352330] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 10.352334] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 10.352339] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 10.413814] [drm] radeon kernel modesetting enabled.
[ 10.419689] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 10.420247] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 10.420332] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 10.420411] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 10.420492] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 10.420573] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 10.420652] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 10.420732] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 10.420814] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 10.474011] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[ 10.474043] [drm] register mmio base: 0xF0100000
[ 10.474046] [drm] register mmio size: 262144
[ 10.474229] ATOM BIOS: AMD
[ 10.480707] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 10.480714] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 10.480719] [drm] Detected VRAM RAM=384M, BAR=256M
[ 10.480722] [drm] RAM width 32bits DDR
[ 10.481438] [TTM] Zone kernel: Available graphics memory: 412000 kiB
[ 10.481444] [TTM] Zone highmem: Available graphics memory: 3945630 kiB
[ 10.481447] [TTM] Initializing pool allocator
[ 10.481461] [TTM] Initializing DMA pool allocator
[ 10.481507] [drm] radeon: 384M of VRAM memory ready
[ 10.481511] [drm] radeon: 1024M of GTT memory ready.
[ 10.481531] [drm] Loading PALM Microcode
[ 10.549187] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[ 10.558395] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[ 10.580665] kvm: Nested Virtualization enabled
[ 10.580679] kvm: Nested Paging enabled
[ 10.605747] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[ 10.605767] [drm] Internal thermal controller without fan control
[ 10.605902] [drm] Found smc ucode version: 0x00010601
[ 10.605991] [drm] radeon: dpm initialized
[ 10.612490] r8169 0000:03:00.0 eth10: renamed from eth0
[ 10.620429] systemd-udevd[278]: renamed network interface eth0 to eth10
[ 10.662713] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[ 10.664262] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 10.664358] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 10.688118] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with sysinit.target/start
[ 10.760097] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 10.771727] radeon 0000:00:01.0: WB enabled
[ 10.771743] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xf67edc00
[ 10.771749] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xf67edc0c
[ 10.773439] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8c32118
[ 10.773446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.773448] [drm] Driver supports precise vblank timestamp query.
[ 10.773452] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 10.800309] radeon 0000:00:01.0: radeon: using MSI.
[ 10.802263] [drm] radeon: irq initialized.
[ 10.854799] [drm] ring test on 0 succeeded in 1 usecs
[ 10.854819] [drm] ring test on 3 succeeded in 3 usecs
[ 10.865878] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 10.872034] cfg80211: Calling CRDA to update world regulatory domain
[ 10.908054] [drm] ring test on 5 succeeded in 1 usecs
[ 10.928228] [drm] UVD initialized successfully.
[ 10.930426] [drm] ib test on ring 0 succeeded in 0 usecs
[ 10.930472] [drm] ib test on ring 3 succeeded in 0 usecs
[ 11.070978] cfg80211: World regulatory domain updated:
[ 11.070991] cfg80211: DFS Master region: unset
[ 11.070996] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.071002] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.071006] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.071011] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.071016] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.071021] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.071025] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.071029] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.071033] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.102793] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 11.244491] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 11.280730] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[ 11.299471] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.342151] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.342948] usbcore: registered new interface driver rt2800usb
[ 11.365902] rt2800usb 2-1:1.0 wlan1: renamed from wlan0
[ 11.379070] systemd-udevd[274]: renamed network interface wlan0 to wlan1
[ 11.401159] systemd-journald[236]: Received request to flush runtime journal from PID 1
[ 11.450770] [drm] ib test on ring 5 succeeded
[ 11.477051] [drm] Radeon Display Connectors
[ 11.477059] [drm] Connector 0:
[ 11.477062] [drm] HDMI-A-1
[ 11.477065] [drm] HPD1
[ 11.477070] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 11.477072] [drm] Encoders:
[ 11.477075] [drm] DFP1: INTERNAL_UNIPHY
[ 11.477078] [drm] Connector 1:
[ 11.477081] [drm] HDMI-A-2
[ 11.477083] [drm] HPD2
[ 11.477087] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 11.477089] [drm] Encoders:
[ 11.477091] [drm] DFP2: INTERNAL_UNIPHY
[ 11.477094] [drm] Connector 2:
[ 11.477096] [drm] VGA-1
[ 11.477100] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 11.477102] [drm] Encoders:
[ 11.477104] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 11.521024] [drm] fb mappable at 0xE0478000
[ 11.521034] [drm] vram apper at 0xE0000000
[ 11.521037] [drm] size 5242880
[ 11.521040] [drm] fb depth is 24
[ 11.521042] [drm] pitch is 5120
[ 11.521422] fbcon: radeondrmfb (fb0) is primary device
[ 11.570232] Console: switching to colour frame buffer device 160x64
[ 11.581372] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 11.581375] radeon 0000:00:01.0: registered panic notifier
[ 11.590914] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:01.0 on minor 0
[ 12.246054] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 12.247127] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 12.247151] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 12.467225] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 13.059527] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 13.211753] r8169 0000:03:00.0 eth10: link down
[ 13.212099] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[ 32.347270] wlan1: authenticate with 34:31:c4:bd:c8:97
[ 32.394463] wlan1: send auth to 34:31:c4:bd:c8:97 (try 1/3)
[ 32.399795] wlan1: authenticated
[ 32.402868] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
[ 32.423428] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x31 status=0 aid=1)
[ 32.432825] wlan1: associated
[ 32.432945] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 32.433110] cfg80211: Calling CRDA for country: DE
[ 32.445072] cfg80211: Regulatory domain changed to country: DE
[ 32.445085] cfg80211: DFS Master region: ETSI
[ 32.445089] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 32.445095] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.445101] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 32.445106] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 32.445111] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 32.445115] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)