blob: fb634a3de6a2c5036afb3ccdf55752fb71611481 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c54fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7c55000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.2-996-gcc728f0 01/28/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5d20-0x000f5d2f] mapped at [c00f5d20]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] BRK [0x0179d000, 0x0179efff] PGTABLE
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3604a000-0x3701cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5F20 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000C7C700E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000C7C72740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000C7C70280 0024B8 (v02 ASROCK COREBOOT 00010001 INTL 20150619)
[ 0.000000] ACPI: FACS 0x00000000C7C70240 000040
[ 0.000000] ACPI: FACS 0x00000000C7C70240 000040
[ 0.000000] ACPI: SSDT 0x00000000C7C72840 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000C7C72890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000C7C728D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000C7C72930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000C7C72960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000C7C73FF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000C7C743D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7802MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x1effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xc7c54fff]
[ 0.000000] node 0: [mem 0x00000000-0x1effffff]
[ 0.000000] On node 0 totalpages: 1993715
[ 0.000000] free_area_init_node: node 0, pgdat c165d180, node_mem_map f1c6a020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15605 pages used for memmap
[ 0.000000] HighMem zone: 1766999 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75d0000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991943
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0021f000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 7880292K/7974860K available (4608K kernel code, 522K rwdata, 1452K rodata, 656K init, 460K bss, 94568K reserved, 7067996K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc1671000 - 0xc1715000 ( 656 kB)
.data : 0xc148044c - 0xc166fb40 (1981 kB)
.text : 0xc1000000 - 0xc148044c (4609 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f1806000 soft=f1808000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.896 MHz processor
[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.79 BogoMIPS (lpj=6399584)
[ 0.000061] pid_max: default: 32768 minimum: 301
[ 0.000079] ACPI: Core revision 20140424
[ 0.005848] ACPI: All ACPI Tables successfully acquired
[ 0.005895] Security Framework initialized
[ 0.005914] AppArmor: AppArmor disabled by boot time parameter
[ 0.005918] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.005952] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005956] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006356] Initializing cgroup subsys memory
[ 0.006368] Initializing cgroup subsys devices
[ 0.006383] Initializing cgroup subsys freezer
[ 0.006389] Initializing cgroup subsys net_cls
[ 0.006400] Initializing cgroup subsys blkio
[ 0.006409] Initializing cgroup subsys perf_event
[ 0.006414] Initializing cgroup subsys net_prio
[ 0.006456] CPU: Physical Processor ID: 0
[ 0.006459] CPU: Processor Core ID: 0
[ 0.006465] mce: CPU supports 6 MCE banks
[ 0.006484] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.006813] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
[ 0.008991] ftrace: allocating 20810 entries in 41 pages
[ 0.028355] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028819] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.068509] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.176346] Performance Events: AMD PMU driver.
[ 0.176356] ... version: 0
[ 0.176358] ... bit width: 48
[ 0.176361] ... generic registers: 4
[ 0.176363] ... value mask: 0000ffffffffffff
[ 0.176366] ... max period: 00007fffffffffff
[ 0.176369] ... fixed-purpose events: 0
[ 0.176371] ... event mask: 000000000000000f
[ 0.179596] CPU 1 irqstacks, hard=f193e000 soft=f1940000
[ 0.179605] x86: Booting SMP configuration:
[ 0.179609] .... node #0, CPUs: #1
[ 0.189648] Initializing CPU#1
[ 0.192818] x86: Booted up 1 node, 2 CPUs
[ 0.192825] smpboot: Total of 2 processors activated (6399.58 BogoMIPS)
[ 0.193615] devtmpfs: initialized
[ 0.196350] pinctrl core: initialized pinctrl subsystem
[ 0.196521] NET: Registered protocol family 16
[ 0.196743] cpuidle: using governor ladder
[ 0.196750] cpuidle: using governor menu
[ 0.197058] ACPI: bus type PCI registered
[ 0.197063] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.197382] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.197387] bios32_service(0x49435024): not present
[ 0.197390] PCI: Using configuration type 1 for base access
[ 0.197392] PCI: Using configuration type 1 for extended access
[ 0.210575] ACPI: Added _OSI(Module Device)
[ 0.210584] ACPI: Added _OSI(Processor Device)
[ 0.210588] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.210591] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.212841] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.217229] ACPI: Interpreter enabled
[ 0.217251] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.217276] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.217280] ACPI: Using IOAPIC for interrupt routing
[ 0.217310] HEST: Table parsing has been initialized.
[ 0.217319] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.233344] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233360] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.233498] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.234052] PCI host bridge to bus 0000:00
[ 0.234059] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.234064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.234069] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.234076] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.234080] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.234097] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.234282] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.234302] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.234314] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.234324] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.234392] pci 0000:00:01.0: supports D1 D2
[ 0.234473] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.234566] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.234583] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.234662] pci 0000:00:01.1: supports D1 D2
[ 0.234740] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.234931] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.234960] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.234975] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.234989] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.235003] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.235018] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.235032] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.235302] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.235323] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.235471] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.235633] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.235660] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[ 0.235771] pci 0000:00:12.2: supports D1 D2
[ 0.235776] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.235858] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.235979] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.235999] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.236146] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.236310] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.236337] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[ 0.236449] pci 0000:00:13.2: supports D1 D2
[ 0.236453] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.236534] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.236699] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.236970] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.237002] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.237092] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.237318] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.237614] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.237734] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.237886] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.237907] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.238057] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.238216] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.238324] pci 0000:00:15.0: supports D1 D2
[ 0.238412] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.238573] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.238687] pci 0000:00:15.1: supports D1 D2
[ 0.238775] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.238939] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.239106] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.239270] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.239437] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.239618] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.239783] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.239943] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.240111] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.240542] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.240558] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240562] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240567] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240571] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.240674] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.240898] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.240928] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.240968] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.240995] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.241124] pci 0000:03:00.0: supports D1 D2
[ 0.241128] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249133] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.249161] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.249179] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.249213] pci_bus 0000:00: on NUMA node 0
[ 0.250165] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250407] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250503] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250599] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250694] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250790] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.250880] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.250980] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.251242] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.251717] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.251727] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.251739] vgaarb: loaded
[ 0.251742] vgaarb: bridge control possible 0000:00:01.0
[ 0.251890] PCI: Using ACPI for IRQ routing
[ 0.251896] PCI: pci_cache_line_size set to 64 bytes
[ 0.252018] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.252023] e820: reserve RAM buffer [mem 0xc7c55000-0xc7ffffff]
[ 0.252027] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.252407] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.252416] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.254593] Switched to clocksource hpet
[ 0.265169] pnp: PnP ACPI init
[ 0.265200] ACPI: bus type PNP registered
[ 0.265651] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265928] pnp: PnP ACPI: found 1 devices
[ 0.265931] ACPI: bus type PNP unregistered
[ 0.265938] PnPBIOS: Disabled by ACPI PNP
[ 0.310690] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.310716] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.310734] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.310741] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.310753] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.310766] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310780] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.310785] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.310789] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.310794] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310798] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.310802] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.310807] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.310970] NET: Registered protocol family 2
[ 0.311636] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.311666] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.311704] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.311751] TCP: reno registered
[ 0.311756] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.311769] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.312003] NET: Registered protocol family 1
[ 0.312037] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.368809] PCI: CLS 64 bytes, default 64
[ 0.368935] Unpacking initramfs...
[ 1.004268] Freeing initrd memory: 16204K (f604a000 - f701d000)
[ 1.005062] microcode: CPU0: patch_level=0x05000119
[ 1.005081] microcode: CPU1: patch_level=0x05000119
[ 1.005428] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.005449] LVT offset 0 assigned for vector 0x400
[ 1.005576] perf: AMD IBS detected (0x000000ff)
[ 1.006549] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.006726] audit: initializing netlink subsys (disabled)
[ 1.006768] audit: type=2000 audit(1454048771.900:1): initialized
[ 1.007545] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.007586] zbud: loaded
[ 1.007921] VFS: Disk quotas dquot_6.5.2
[ 1.007954] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.008136] msgmni has been set to 1618
[ 1.009470] alg: No test for stdrng (krng)
[ 1.009551] bounce: pool size: 64 pages
[ 1.009669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.009814] io scheduler noop registered
[ 1.009819] io scheduler deadline registered
[ 1.009950] io scheduler cfq registered (default)
[ 1.010502] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 1.010960] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[ 1.011206] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.011214] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.011250] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.011255] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.011262] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.011298] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.011336] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.011453] GHES: Failed to enable APEI firmware first mode.
[ 1.011464] isapnp: ISA Plug & Play support disabled
[ 1.011746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.032450] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.034219] Linux agpgart interface v0.103
[ 1.034696] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.038616] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.038639] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.039342] mousedev: PS/2 mouse device common for all mice
[ 1.039559] rtc_cmos 00:00: RTC can wake from S4
[ 1.039899] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.040008] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.040040] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.040358] TCP: cubic registered
[ 1.040521] NET: Registered protocol family 10
[ 1.041091] mip6: Mobile IPv6
[ 1.041104] NET: Registered protocol family 17
[ 1.041115] mpls_gso: MPLS GSO support
[ 1.041562] Using IPI No-Shortcut mode
[ 1.042049] registered taskstats version 1
[ 1.043118] rtc_cmos 00:00: setting system clock to 2016-01-29 06:26:12 UTC (1454048772)
[ 1.043236] PM: Hibernation image not present or could not be loaded.
[ 1.043802] Freeing unused kernel memory: 656K (c1671000 - c1715000)
[ 1.043948] Write protecting the kernel text: 4612k
[ 1.044091] Write protecting the kernel read-only data: 1456k
[ 1.044094] NX-protecting the kernel data: 3580k
[ 1.136478] systemd-udevd[61]: starting version 215
[ 1.137297] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.156548] ACPI: bus type USB registered
[ 1.156620] usbcore: registered new interface driver usbfs
[ 1.156647] usbcore: registered new interface driver hub
[ 1.162827] usbcore: registered new device driver usb
[ 1.163935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.164607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.164969] ehci-pci: EHCI PCI platform driver
[ 1.165379] QUIRK: Enable AMD PLL fix
[ 1.165421] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.165436] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.165448] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.165533] ehci-pci 0000:00:12.2: debug port 1
[ 1.165606] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[ 1.168556] SCSI subsystem initialized
[ 1.173268] libata version 3.00 loaded.
[ 1.174954] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.175099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.175104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.175109] usb usb1: Product: EHCI Host Controller
[ 1.175113] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.175117] usb usb1: SerialNumber: 0000:00:12.2
[ 1.175429] hub 1-0:1.0: USB hub found
[ 1.175454] hub 1-0:1.0: 5 ports detected
[ 1.176221] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.176236] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.176245] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.176262] ehci-pci 0000:00:13.2: debug port 1
[ 1.176314] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[ 1.176670] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.176680] ACPI: Thermal Zone [TZ00] (34 C)
[ 1.186634] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.186782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.186787] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.186791] usb usb2: Product: EHCI Host Controller
[ 1.186796] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.186799] usb usb2: SerialNumber: 0000:00:13.2
[ 1.187128] hub 2-0:1.0: USB hub found
[ 1.187155] hub 2-0:1.0: 5 ports detected
[ 1.188083] ohci-pci: OHCI PCI platform driver
[ 1.188449] ahci 0000:00:11.0: version 3.0
[ 1.189073] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.189081] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.191681] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.192175] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 1.192540] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf7e12000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 42
[ 1.192545] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.197068] scsi0 : ahci
[ 1.204362] scsi1 : ahci
[ 1.206839] scsi2 : ahci
[ 1.207860] scsi3 : ahci
[ 1.208044] scsi4 : ahci
[ 1.208288] scsi5 : ahci
[ 1.208453] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.208459] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.208464] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.208469] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.208474] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.208479] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.208931] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.208947] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.209010] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 1.267107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.267117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.267122] usb usb3: Product: OHCI PCI host controller
[ 1.267126] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 1.267130] usb usb3: SerialNumber: 0000:00:12.0
[ 1.267729] hub 3-0:1.0: USB hub found
[ 1.267754] hub 3-0:1.0: 5 ports detected
[ 1.268398] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.268412] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.268464] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 1.327051] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.327062] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.327067] usb usb4: Product: OHCI PCI host controller
[ 1.327071] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 1.327075] usb usb4: SerialNumber: 0000:00:13.0
[ 1.327691] hub 4-0:1.0: USB hub found
[ 1.327715] hub 4-0:1.0: 5 ports detected
[ 1.328366] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.328379] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.328431] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 1.387047] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.387058] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.387063] usb usb5: Product: OHCI PCI host controller
[ 1.387067] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[ 1.387071] usb usb5: SerialNumber: 0000:00:14.5
[ 1.387658] hub 5-0:1.0: USB hub found
[ 1.387682] hub 5-0:1.0: 2 ports detected
[ 1.526983] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.527038] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.527080] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.527111] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.527162] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.698981] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.699716] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[ 1.699727] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.700579] ata4.00: configured for UDMA/100
[ 1.701211] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
[ 1.712484] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.712625] sd 3:0:0:0: [sda] Write Protect is off
[ 1.712631] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712674] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.713932] sda: sda1 sda2
[ 1.715164] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.716501] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.771306] device-mapper: uevent: version 1.0.3
[ 1.771465] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.002901] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 2.058903] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.208563] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
[ 2.208580] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.208589] usb 2-2: Product: 802.11 n WLAN
[ 2.208597] usb 2-2: Manufacturer: Ralink
[ 2.346906] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 2.519140] usb 3-1: New USB device found, idVendor=046d, idProduct=c312
[ 2.519158] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.519167] usb 3-1: Product: USB Multimedia Keyboard
[ 2.519175] usb 3-1: Manufacturer: LITEON Technology
[ 2.523732] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.530478] usbcore: registered new interface driver usbhid
[ 2.530487] usbhid: USB HID core driver
[ 2.532493] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C312.0001/input/input2
[ 2.532626] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0
[ 2.782903] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 2.948069] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001
[ 2.948086] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.948095] usb 3-2: Product: USB Mouse
[ 2.954798] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0002/input/input3
[ 2.955006] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB Mouse ] on usb-0000:00:12.0-2/input0
[ 2.960238] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0003/input/input4
[ 2.960350] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Mouse ] on usb-0000:00:12.0-2/input1
[ 3.003281] Switched to clocksource tsc
[ 6.226527] NET: Registered protocol family 38
[ 6.617555] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.747773] random: nonblocking pool is initialized
[ 7.578351] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.578383] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.578397] systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
[ 7.578525] systemd[1]: Found ordering cycle on basic.target/start
[ 7.578532] systemd[1]: Found dependency on sysinit.target/start
[ 7.578540] systemd[1]: Found dependency on rpcbind.service/start
[ 7.578547] systemd[1]: Found dependency on network-online.target/start
[ 7.578553] systemd[1]: Found dependency on network.target/start
[ 7.578559] systemd[1]: Found dependency on systemd-networkd.service/start
[ 7.578565] systemd[1]: Found dependency on dbus.service/start
[ 7.578571] systemd[1]: Found dependency on basic.target/start
[ 7.578577] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[ 7.578631] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[ 8.751173] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 8.969981] lp: driver loaded but no devices found
[ 8.985914] ppdev: user-space parallel port driver
[ 9.006670] fuse init (API version 7.23)
[ 9.050693] w83627ehf: Found NCT6775F chip at 0x290
[ 9.057470] systemd-udevd[241]: starting version 215
[ 9.458565] ACPI: acpi_idle registered with cpuidle
[ 9.486740] acpi-cpufreq: overriding BIOS provided _PSD data
[ 9.504244] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 9.504257] ACPI: Power Button [PWRB]
[ 9.504386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 9.504392] ACPI: Power Button [PWRF]
[ 9.544743] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.544906] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[ 9.562826] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 9.562948] sp5100_tco: PCI Revision ID: 0x42
[ 9.563030] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 9.563044] sp5100_tco: Last reboot was not triggered by watchdog.
[ 9.563142] sp5100_tco: initialized (0xf7e2cb00). heartbeat=60 sec (nowayout=0)
[ 9.566097] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.619421] [drm] Initialized drm 1.1.0 20060810
[ 9.858834] systemd-udevd[285]: renamed network interface eth0 to eth10
[ 9.860204] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 9.915379] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 9.974779] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 9.975226] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 9.975232] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.975241] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.975245] sound hdaudioC1D0: mono: mono_out=0x0
[ 9.975250] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 9.975253] sound hdaudioC1D0: inputs:
[ 9.975259] sound hdaudioC1D0: Rear Mic=0x18
[ 9.975264] sound hdaudioC1D0: Front Mic=0x19
[ 9.975268] sound hdaudioC1D0: Line=0x1a
[ 9.975272] sound hdaudioC1D0: CD=0x1c
[ 9.992041] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9
[ 9.992470] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 9.992552] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 9.992630] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 9.992709] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 9.992784] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 9.992857] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 9.992933] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 9.993005] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 10.096066] [drm] radeon kernel modesetting enabled.
[ 10.140380] kvm: Nested Virtualization enabled
[ 10.140393] kvm: Nested Paging enabled
[ 10.154533] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[ 10.154562] [drm] register mmio base: 0xF0100000
[ 10.154565] [drm] register mmio size: 262144
[ 10.155155] ATOM BIOS: AMD
[ 10.163986] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 10.163995] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 10.164000] [drm] Detected VRAM RAM=384M, BAR=256M
[ 10.164002] [drm] RAM width 32bits DDR
[ 10.165170] [TTM] Zone kernel: Available graphics memory: 414588 kiB
[ 10.165175] [TTM] Zone highmem: Available graphics memory: 3948586 kiB
[ 10.165178] [TTM] Initializing pool allocator
[ 10.165192] [TTM] Initializing DMA pool allocator
[ 10.165237] [drm] radeon: 384M of VRAM memory ready
[ 10.165240] [drm] radeon: 1024M of GTT memory ready.
[ 10.165935] [drm] Loading PALM Microcode
[ 10.236354] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 10.252844] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[ 10.283045] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[ 10.317656] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[ 10.317678] [drm] Internal thermal controller without fan control
[ 10.317805] [drm] Found smc ucode version: 0x00010601
[ 10.317886] [drm] radeon: dpm initialized
[ 10.343805] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 10.343915] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 10.364493] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 10.366355] radeon 0000:00:01.0: WB enabled
[ 10.366369] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff6e8c00
[ 10.366376] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff6e8c0c
[ 10.368313] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8732118
[ 10.369649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.369654] [drm] Driver supports precise vblank timestamp query.
[ 10.369661] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 10.369697] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
[ 10.369722] radeon 0000:00:01.0: radeon: using MSI.
[ 10.369764] [drm] radeon: irq initialized.
[ 10.387683] [drm] ring test on 0 succeeded in 1 usecs
[ 10.387696] [drm] ring test on 3 succeeded in 3 usecs
[ 10.465801] [drm] ring test on 5 succeeded in 1 usecs
[ 10.485883] [drm] UVD initialized successfully.
[ 10.486366] [drm] ib test on ring 0 succeeded in 0 usecs
[ 10.486406] [drm] ib test on ring 3 succeeded in 0 usecs
[ 10.509556] [drm] ib test on ring 5 succeeded
[ 10.531865] [drm] Radeon Display Connectors
[ 10.531871] [drm] Connector 0:
[ 10.531874] [drm] HDMI-A-1
[ 10.531876] [drm] HPD1
[ 10.531881] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 10.531883] [drm] Encoders:
[ 10.531886] [drm] DFP1: INTERNAL_UNIPHY
[ 10.531889] [drm] Connector 1:
[ 10.531891] [drm] HDMI-A-2
[ 10.531893] [drm] HPD2
[ 10.531897] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 10.531899] [drm] Encoders:
[ 10.531902] [drm] DFP2: INTERNAL_UNIPHY
[ 10.531904] [drm] Connector 2:
[ 10.531906] [drm] VGA-1
[ 10.531910] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 10.531912] [drm] Encoders:
[ 10.531914] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 10.567485] cfg80211: Calling CRDA to update world regulatory domain
[ 10.572522] [drm] fb mappable at 0xE0477000
[ 10.572528] [drm] vram apper at 0xE0000000
[ 10.572530] [drm] size 5242880
[ 10.572533] [drm] fb depth is 24
[ 10.572535] [drm] pitch is 5120
[ 10.573003] fbcon: radeondrmfb (fb0) is primary device
[ 10.624139] Console: switching to colour frame buffer device 160x64
[ 10.634331] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.634337] radeon 0000:00:01.0: registered panic notifier
[ 10.654746] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[ 10.782690] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 10.876362] cfg80211: World regulatory domain updated:
[ 10.876381] cfg80211: DFS Master region: unset
[ 10.876388] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.876399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.876408] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.876416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.876425] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.876435] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.876443] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.876451] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.876458] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.926307] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 10.942875] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[ 10.980947] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.016577] systemd-journald[232]: Received request to flush runtime journal from PID 1
[ 11.048092] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.048821] usbcore: registered new interface driver rt2800usb
[ 11.135943] systemd-udevd[277]: renamed network interface wlan0 to wlan1
[ 11.697353] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 11.698501] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 11.698522] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 11.919270] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 12.990785] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 13.130393] r8169 0000:03:00.0 eth10: link down
[ 13.130531] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[ 35.110989] wlan1: authenticate with 34:31:c4:bd:c8:97
[ 35.154667] wlan1: direct probe to 34:31:c4:bd:c8:97 (try 1/3)
[ 35.358892] wlan1: send auth to 34:31:c4:bd:c8:97 (try 2/3)
[ 35.363119] wlan1: authenticated
[ 35.366722] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
[ 35.390510] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x31 status=0 aid=5)
[ 35.400181] wlan1: associated
[ 35.400282] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 35.400438] cfg80211: Calling CRDA for country: DE
[ 35.412739] cfg80211: Regulatory domain changed to country: DE
[ 35.412753] cfg80211: DFS Master region: ETSI
[ 35.412757] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 35.412765] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 35.412772] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 35.412778] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 35.412783] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 35.412788] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)