blob: e66a2fba5735e4f04d5ec4e6468780c6bc249be0 [file] [log] [blame]
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* APIs provided by firmware to vboot_reference.
*
* General notes:
*
* All verified boot functions now start with "Vb" for namespace clarity. This
* fixes the problem where uboot and vboot both defined assert().
*
* Verified boot APIs to be implemented by the calling firmware and exported to
* vboot_reference start with "VbEx".
*
* TODO: split this file into a vboot_entry_points.h file which contains the
* entry points for the firmware to call vboot_reference, and a
* vboot_firmware_exports.h which contains the APIs to be implemented by the
* calling firmware and exported to vboot_reference.
*/
#ifndef VBOOT_REFERENCE_VBOOT_API_H_
#define VBOOT_REFERENCE_VBOOT_API_H_
#include <stdint.h>
#include <stdlib.h>
/*****************************************************************************/
/* Error codes */
/*
* Functions which return an error all return this type. This is a 32-bit
* value rather than an int so it's consistent across UEFI, which is 32-bit
* during PEI and 64-bit during DXE/BDS.
*/
typedef uint32_t VbError_t;
/*
* Predefined error numbers. Success is 0. Errors are non-zero, but differ
* between functions. For example, the TPM functions may pass through TPM
* error codes, some of which may be recoverable.
*/
enum VbErrorPredefined_t {
/* No error; function completed successfully. */
VBERROR_SUCCESS = 0,
/*
* The verified boot entry points VbInit(), VbSelectFirmware(),
* VbSelectAndLoadKernel() may return the following errors.
*/
/* Unknown error */
VBERROR_UNKNOWN = 0x10000,
/* Unable to initialize shared data */
VBERROR_INIT_SHARED_DATA = 0x10001,
/* Error resuming TPM during a S3 resume */
VBERROR_TPM_S3_RESUME = 0x10002,
/* VbSelectFirmware() failed to find a valid firmware */
VBERROR_LOAD_FIRMWARE = 0x10003,
/* Unable to write firmware versions to TPM */
VBERROR_TPM_WRITE_FIRMWARE = 0x10004,
/* Unable to lock firmware versions in TPM */
VBERROR_TPM_LOCK_FIRMWARE = 0x10005,
/* Unable to set boot mode state in TPM */
VBERROR_TPM_SET_BOOT_MODE_STATE = 0x10006,
/* TPM requires reboot */
VBERROR_TPM_REBOOT_REQUIRED = 0x10007,
/* Unable to set up TPM */
VBERROR_TPM_FIRMWARE_SETUP = 0x10008,
/* Unable to read kernel versions from TPM */
VBERROR_TPM_READ_KERNEL = 0x10009,
/* Attempt to load developer-only firmware with developer switch off */
VBERROR_DEV_FIRMWARE_SWITCH_MISMATCH = 0x1000A,
/* Unable to write kernel versions to TPM */
VBERROR_TPM_WRITE_KERNEL = 0x1000B,
/* Unable to lock kernel versions in TPM */
VBERROR_TPM_LOCK_KERNEL = 0x1000C,
/* Calling firmware requested shutdown via VbExIsShutdownRequested() */
VBERROR_SHUTDOWN_REQUESTED = 0x1000D,
/* Unable to find a boot device on which to look for a kernel */
VBERROR_NO_DISK_FOUND = 0x1000E,
/* No OS kernel found on any boot device */
VBERROR_NO_KERNEL_FOUND = 0x1000F,
/* All OS kernels found were invalid (corrupt, improperly signed...) */
VBERROR_INVALID_KERNEL_FOUND = 0x10010,
/* VbSelectAndLoadKernel() requested recovery mode */
VBERROR_LOAD_KERNEL_RECOVERY = 0x10011,
/* Other error inside VbSelectAndLoadKernel() */
VBERROR_LOAD_KERNEL = 0x10012,
/* Invalid Google binary block */
VBERROR_INVALID_GBB = 0x10013,
/* Invalid bitmap volume */
VBERROR_INVALID_BMPFV = 0x10014,
/* Invalid screen index */
VBERROR_INVALID_SCREEN_INDEX = 0x10015,
/* Simulated (test) error */
VBERROR_SIMULATED = 0x10016,
/* Invalid parameter */
VBERROR_INVALID_PARAMETER = 0x10017,
/* VbExBeep() can't make sounds at all */
VBERROR_NO_SOUND = 0x10018,
/* VbExBeep() can't make sound in the background */
VBERROR_NO_BACKGROUND_SOUND = 0x10019,
/* Developer has requested a BIOS shell */
VBERROR_BIOS_SHELL_REQUESTED = 0x10020,
/* Need VGA and don't have it, or vice-versa */
VBERROR_VGA_OPROM_MISMATCH = 0x10021,
/* Need EC to reboot to read-only code */
VBERROR_EC_REBOOT_TO_RO_REQUIRED = 0x10022,
/* Invalid region read parameters */
VBERROR_REGION_READ_INVALID = 0x10023,
/* Cannot read from region */
VBERROR_REGION_READ_FAILED = 0x10024,
/* Unsupported region type */
VBERROR_UNSUPPORTED_REGION = 0x10025,
/* No image present (returned from VbGbbReadImage() for missing image) */
VBERROR_NO_IMAGE_PRESENT = 0x10026,
/* VbExEcGetExpectedRWHash() may return the following codes */
/* Compute expected RW hash from the EC image; BIOS doesn't have it */
VBERROR_EC_GET_EXPECTED_HASH_FROM_IMAGE = 0x20000,
};
/*****************************************************************************/
/* Main entry points from firmware into vboot_reference */
/*
* Minimum and recommended size of shared_data_blob in bytes. Shared data blob
* is used to communicate data between calls to VbInit(), VbSelectFirmware(),
* the OS. Minimum size is enough to hold all required data for verified boot
* but may not be able to hold debug output.
*/
#define VB_SHARED_DATA_MIN_SIZE 3072
#define VB_SHARED_DATA_REC_SIZE 16384
/*
* Data passed by firmware to VbInit(), VbSelectFirmware() and
* VbSelectAndLoadKernel().
*
* Note that in UEFI, these are called by different phases in different
* processor modes (VbInit() and VbSelectFirmware() = 32-bit PEI,
* VbSelectAndLoadKernel() = 64-bit BDS), so the data may be at a different
* location between calls.
*/
typedef struct VbCommonParams {
/* Pointer to GBB data */
void *gbb_data;
/* Size of GBB data in bytes */
uint32_t gbb_size;
/*
* Shared data blob for data shared between verified boot entry points.
* This should be at least VB_SHARED_DATA_MIN_SIZE bytes long, and
* ideally is VB_SHARED_DATA_REC_SIZE bytes long.
*/
/* Pointer to shared data blob buffer */
void *shared_data_blob;
/*
* On input, set to size of shared data blob buffer, in bytes. On
* output, this will contain the actual data size placed into the
* buffer.
*/
uint32_t shared_data_size;
/*
* Internal context/data for verified boot, to maintain state during
* calls to other API functions such as VbExHashFirmwareBody().
* Allocated and freed inside the entry point; firmware should not look
* at this.
*/
void *vboot_context;
/*
* Internal context/data for firmware / VbExHashFirmwareBody(). Needed
* because the PEI phase of UEFI boot runs out of ROM and thus can't
* modify global variables; everything needs to get passed around on
* the stack.
*/
void *caller_context;
/* For internal use of Vboot - do not examine or modify! */
struct GoogleBinaryBlockHeader *gbb;
struct BmpBlockHeader *bmp;
} VbCommonParams;
/* Flags for VbInitParams.flags */
/* Developer switch was on at boot time. */
#define VB_INIT_FLAG_DEV_SWITCH_ON 0x00000001
/* Recovery button was pressed at boot time. */
#define VB_INIT_FLAG_REC_BUTTON_PRESSED 0x00000002
/* Hardware write protect was enabled at boot time. */
#define VB_INIT_FLAG_WP_ENABLED 0x00000004
/* This is a S3 resume, not a normal boot. */
#define VB_INIT_FLAG_S3_RESUME 0x00000008
/*
* Previous boot attempt failed for reasons external to verified boot (RAM
* init failure, SSD missing, etc.).
*
* TODO: add a field to VbInitParams which holds a reason code, and report
* that via VbSharedData.
*/
#define VB_INIT_FLAG_PREVIOUS_BOOT_FAIL 0x00000010
/*
* Calling firmware supports read only firmware for normal/developer boot path.
*/
#define VB_INIT_FLAG_RO_NORMAL_SUPPORT 0x00000020
/*
* This platform does not have a physical dev-switch, so we must rely on a
* virtual switch (kept in the TPM) instead. When this flag is set,
* VB_INIT_FLAG_DEV_SWITCH_ON is ignored.
*/
#define VB_INIT_FLAG_VIRTUAL_DEV_SWITCH 0x00000040
/* Set when the VGA Option ROM has been loaded already. */
#define VB_INIT_FLAG_OPROM_LOADED 0x00000080
/* Set if we care about the VGA Option ROM - some platforms don't. */
#define VB_INIT_FLAG_OPROM_MATTERS 0x00000100
/* EC on this platform supports EC software sync. */
#define VB_INIT_FLAG_EC_SOFTWARE_SYNC 0x00000200
/* EC on this platform is slow to update. */
#define VB_INIT_FLAG_EC_SLOW_UPDATE 0x00000400
/*
* Software write protect was enabled at boot time. This is separate from the
* HW write protect. Both must be set for flash write protection to work.
*/
#define VB_INIT_FLAG_SW_WP_ENABLED 0x00000800
/*
* This platform does not have a physical recovery switch which, when present,
* can (and should) be used for additional physical presence checks.
*/
#define VB_INIT_FLAG_VIRTUAL_REC_SWITCH 0x00001000
/* Set when we are calling VbInit() before loading Option ROMs */
#define VB_INIT_FLAG_BEFORE_OPROM_LOAD 0x00002000
/* Allow USB boot on transition to dev */
#define VB_INIT_FLAG_ALLOW_USB_BOOT 0x00004000
/*
* Output flags for VbInitParams.out_flags. Used to indicate potential boot
* paths and configuration to the calling firmware early in the boot process,
* so that it can properly configure itself for the capabilities subsequently
* required by VbSelectFirmware() and VbSelectAndLoadKernel().
*/
/*
* Enable recovery path. Do not rely on any rewritable data (cached RAM
* timings, etc.). Reliable operation is more important than boot speed.
*/
#define VB_INIT_OUT_ENABLE_RECOVERY 0x00000001
/* RAM must be cleared before calling VbSelectFirmware(). */
#define VB_INIT_OUT_CLEAR_RAM 0x00000002
/*
* Load display drivers; VbExDisplay*() functions may be called. If this flag
* is not present, VbExDisplay*() functions will not be called this boot.
*/
#define VB_INIT_OUT_ENABLE_DISPLAY 0x00000004
/*
* Load USB storage drivers; VbExDisk*() functions may be called with the
* VB_DISK_FLAG_REMOVABLE flag. If this flag is not present, VbExDisk*()
* functions will only be called for fixed disks.
*/
#define VB_INIT_OUT_ENABLE_USB_STORAGE 0x00000008
/* If this is a S3 resume, do a debug reset boot instead */
#define VB_INIT_OUT_S3_DEBUG_BOOT 0x00000010
/* BIOS should load any PCI option ROMs it finds, not just internal video */
#define VB_INIT_OUT_ENABLE_OPROM 0x00000020
/* BIOS may be asked to boot something other than ChromeOS */
#define VB_INIT_OUT_ENABLE_ALTERNATE_OS 0x00000040
/* Enable developer path. */
#define VB_INIT_OUT_ENABLE_DEVELOPER 0x00000080
/* Data only used by VbInit() */
typedef struct VbInitParams {
/* Inputs to VbInit() */
/* Flags (see VB_INIT_FLAG_*) */
uint32_t flags;
/* Outputs from VbInit(); valid only if it returns success. */
/* Output flags for firmware; see VB_INIT_OUT_*) */
uint32_t out_flags;
} VbInitParams;
/*
* Firmware types for VbHashFirmwareBody() and
* VbSelectFirmwareParams.selected_firmware. Note that we store these in a
* uint32_t because enum maps to int, which isn't fixed-size.
*/
enum VbSelectFirmware_t {
/* Recovery mode */
VB_SELECT_FIRMWARE_RECOVERY = 0,
/* Rewritable firmware A/B for normal or developer path */
VB_SELECT_FIRMWARE_A = 1,
VB_SELECT_FIRMWARE_B = 2,
/* Read only firmware for normal or developer path. */
VB_SELECT_FIRMWARE_READONLY = 3,
VB_SELECT_FIRMWARE_COUNT,
};
/* Data only used by VbSelectFirmware() */
typedef struct VbSelectFirmwareParams {
/* Inputs to VbSelectFirmware() */
/* Key block + preamble for firmware A */
void *verification_block_A;
/* Key block + preamble for firmware B */
void *verification_block_B;
/* Verification block A size in bytes */
uint32_t verification_size_A;
/* Verification block B size in bytes */
uint32_t verification_size_B;
/* Outputs from VbSelectFirmware(); valid only if it returns success. */
/* Main firmware to run; see VB_SELECT_FIRMWARE_*. */
uint32_t selected_firmware;
} VbSelectFirmwareParams;
/*
* We use disk handles rather than indices. Using indices causes problems if
* a disk is removed/inserted in the middle of processing.
*/
typedef void *VbExDiskHandle_t;
/* Data used only by VbSelectAndLoadKernel() */
typedef struct VbSelectAndLoadKernelParams {
/* Inputs to VbSelectAndLoadKernel() */
/* Destination buffer for kernel (normally at 0x100000 on x86) */
void *kernel_buffer;
/* Size of kernel buffer in bytes */
uint32_t kernel_buffer_size;
/*
* Outputs from VbSelectAndLoadKernel(); valid only if it returns
* success.
*/
/* Handle of disk containing loaded kernel */
VbExDiskHandle_t disk_handle;
/* Partition number on disk to boot (1...M) */
uint32_t partition_number;
/* Address of bootloader image in RAM */
uint64_t bootloader_address;
/* Size of bootloader image in bytes */
uint32_t bootloader_size;
/* UniquePartitionGuid for boot partition */
uint8_t partition_guid[16];
/* Flags passed in by signer */
uint32_t flags;
/*
* TODO: in H2C, all that pretty much just gets passed to the
* bootloader as KernelBootloaderOptions, though the disk handle is
* passed as an index instead of a handle. Is that used anymore now
* that we're passing partition_guid?
*/
} VbSelectAndLoadKernelParams;
/**
* Initialize the verified boot library.
*
* Returns VBERROR_SUCCESS if success, non-zero if error; on error,
* caller should reboot.
*/
VbError_t VbInit(VbCommonParams *cparams, VbInitParams *iparams);
/**
* Select the main firmware.
*
* Returns VBERROR_SUCCESS if success, non-zero if error; on error,
* caller should reboot.
*
* NOTE: This is now called in all modes, including recovery. Previously,
* LoadFirmware() was not called in recovery mode, which meant that
* LoadKernel() needed to duplicate the TPM and VbSharedData initialization
* code.
*/
VbError_t VbSelectFirmware(VbCommonParams *cparams,
VbSelectFirmwareParams *fparams);
/**
* Update the data hash for the current firmware image, extending it by [size]
* bytes stored in [*data]. This function must only be called inside
* VbExHashFirmwareBody(), which is in turn called by VbSelectFirmware().
*/
void VbUpdateFirmwareBodyHash(VbCommonParams *cparams,
uint8_t *data, uint32_t size);
/**
* Select and loads the kernel.
*
* Returns VBERROR_SUCCESS if success, non-zero if error; on error, caller
* should reboot. */
VbError_t VbSelectAndLoadKernel(VbCommonParams *cparams,
VbSelectAndLoadKernelParams *kparams);
/*****************************************************************************/
/* Debug output (from utility.h) */
/**
* Output an error message and quit. Does not return. Supports
* printf()-style formatting.
*/
void VbExError(const char *format, ...);
/**
* Output a debug message. Supports printf()-style formatting.
*/
void VbExDebug(const char *format, ...)
__attribute__ ((format (__printf__, 1, 2)));
/*****************************************************************************/
/* Memory (from utility.h) */
/**
* Allocate [size] bytes and return a pointer to the allocated memory. Abort
* on error; this always either returns a good pointer or never returns.
*
* If any of the firmware API implementations require aligned data (for
* example, disk access on ARM), all pointers returned by VbExMalloc() must
* also be aligned.
*/
void *VbExMalloc(size_t size);
/**
* Free memory pointed to by [ptr] previously allocated by VbExMalloc().
*/
void VbExFree(void *ptr);
/*****************************************************************************/
/* Timer and delay (first two from utility.h) */
/**
* Read a high-resolution timer. Returns the current timer value in arbitrary
* units.
*
* This is intended for benchmarking, so this call MUST be fast. The timer
* frequency must be >1 KHz (preferably >1 MHz), and the timer must not wrap
* around for at least 10 minutes. It is preferable (but not required) that
* the timer be initialized to 0 at boot.
*
* It is assumed that the firmware has some other way of communicating the
* timer frequency to the OS. For example, on x86 we use TSC, and the OS
* kernel reports the initial TSC value at kernel-start and calculates the
* frequency. */
uint64_t VbExGetTimer(void);
/**
* Delay for at least the specified number of milliseconds. Should be accurate
* to within 10% (a requested delay of 1000 ms should result in an actual delay
* of between 1000 - 1100 ms).
*/
void VbExSleepMs(uint32_t msec);
/**
* Play a beep tone of the specified frequency in Hz and duration in msec.
* This is effectively a VbSleep() variant that makes noise.
*
* If the audio codec can run in the background, then:
* zero frequency means OFF, non-zero frequency means ON
* zero msec means return immediately, non-zero msec means delay (and
* then OFF if needed)
* otherwise,
* non-zero msec and non-zero frequency means ON, delay, OFF, return
* zero msec or zero frequency means do nothing and return immediately
*
* The return value is used by the caller to determine the capabilities. The
* implementation should always do the best it can if it cannot fully support
* all features - for example, beeping at a fixed frequency if frequency
* support is not available. At a minimum, it must delay for the specified
* non-zero duration.
*/
VbError_t VbExBeep(uint32_t msec, uint32_t frequency);
/*****************************************************************************/
/* TPM (from tlcl_stub.h) */
/**
* Initialize the stub library. */
VbError_t VbExTpmInit(void);
/**
* Close and open the device. This is needed for running more complex commands
* at user level, such as TPM_TakeOwnership, since the TPM device can be opened
* only by one process at a time.
*/
VbError_t VbExTpmClose(void);
VbError_t VbExTpmOpen(void);
/**
* Send a request_length-byte request to the TPM and receive a response. On
* input, response_length is the size of the response buffer in bytes. On
* exit, response_length is set to the actual received response length in
* bytes. */
VbError_t VbExTpmSendReceive(const uint8_t *request, uint32_t request_length,
uint8_t *response, uint32_t *response_length);
/*****************************************************************************/
/* Non-volatile storage */
#define VBNV_BLOCK_SIZE 16 /* Size of NV storage block in bytes */
/**
* Read the VBNV_BLOCK_SIZE-byte non-volatile storage into buf.
*/
VbError_t VbExNvStorageRead(uint8_t *buf);
/**
* Write the VBNV_BLOCK_SIZE-byte non-volatile storage from buf.
*/
VbError_t VbExNvStorageWrite(const uint8_t *buf);
/*****************************************************************************/
/* Firmware / EEPROM access (previously in load_firmware_fw.h) */
/**
* Calculate the hash of the firmware body data for [firmware_index], which is
* either VB_SELECT_FIRMWARE_A or VB_SELECT_FIRMWARE B.
*
* This function must call VbUpdateFirmwareBodyHash() before returning, to
* update the secure hash for the firmware image. For best performance, the
* implementation should call VbUpdateFirmwareBodyHash() periodically during
* the read, so that updating the hash can be pipelined with the read. If the
* reader cannot update the hash during the read process, it should call
* VbUpdateFirmwareBodyHash() on the entire firmware data after the read,
* before returning.
*
* It is recommended that the firmware use this call to copy the requested
* firmware body from EEPROM into RAM, so that it doesn't need to do a second
* slow copy from EEPROM to RAM if this firmware body is selected.
*
* Note this function doesn't actually pass the firmware body data to verified
* boot, because verified boot doesn't actually need the firmware body, just
* its hash. This is important on x86, where the firmware is stored
* compressed. We hash the compressed data, but the BIOS decompresses it
* during read. Simply updating a hash is compatible with the x86
* read-and-decompress pipeline.
*/
VbError_t VbExHashFirmwareBody(VbCommonParams *cparams,
uint32_t firmware_index);
/*****************************************************************************/
/* Disk access (previously in boot_device.h) */
/* Flags for VbDisk APIs */
/* Disk is removable. Example removable disks: SD cards, USB keys. */
#define VB_DISK_FLAG_REMOVABLE 0x00000001
/*
* Disk is fixed. If this flag is present, disk is internal to the system and
* not removable. Example fixed disks: internal SATA SSD, eMMC.
*/
#define VB_DISK_FLAG_FIXED 0x00000002
/*
* Note that VB_DISK_FLAG_REMOVABLE and VB_DISK_FLAG_FIXED are
* mutually-exclusive for a single disk. VbExDiskGetInfo() may specify both
* flags to request disks of both types in a single call.
*
* At some point we could specify additional flags, but we don't currently
* have a way to make use of these:
*
* USB Device is known to be attached to USB. Note that the SD
* card reader inside x86 systems is attached to USB so this
* isn't super useful.
* SD Device is known to be a SD card. Note that external card
* readers might not return this information, so also of
* questionable use.
* READ_ONLY Device is known to be read-only. Could be used by recovery
* when processing read-only recovery image.
*/
/*
* Disks are used in two ways:
* - As a random-access device to read and write the GPT
* - As a streaming device to read the kernel
* These are implemented differently on raw NAND vs eMMC/SATA/USB
* - On eMMC/SATA/USB, both of these refer to the same underlying
* storage, so they have the same size and LBA size. In this case,
* the GPT should not point to the same address as itself.
* - On raw NAND, the GPT is held on a portion of the SPI flash.
* Random access GPT operations refer to the SPI and streaming
* operations refer to NAND. The GPT may therefore point into
* the same offsets as itself.
* These types are distinguished by the following flag and VbDiskInfo
* has separate fields to describe the random-access ("GPT") and
* streaming aspects of the disk. If a disk is random-access (i.e.
* not raw NAND) then these fields are equal.
*/
#define VB_DISK_FLAG_EXTERNAL_GPT 0x00000004
/* Information on a single disk */
typedef struct VbDiskInfo {
/* Disk handle */
VbExDiskHandle_t handle;
/* Size of a random-access LBA sector in bytes */
uint64_t bytes_per_lba;
/* Number of random-access LBA sectors on the device.
* If streaming_lba_count is 0, this stands in for the size of the
* randomly accessed portion as well as the streaming portion.
* Otherwise, this is only the randomly-accessed portion. */
uint64_t lba_count;
/* Number of streaming sectors on the device */
uint64_t streaming_lba_count;
/* Flags (see VB_DISK_FLAG_* constants) */
uint32_t flags;
/*
* Optional name string, for use in debugging. May be empty or null if
* not available.
*/
const char *name;
} VbDiskInfo;
/**
* Store information into [info] for all disks (storage devices) attached to
* the system which match all of the disk_flags.
*
* On output, count indicates how many disks are present, and [infos_ptr]
* points to a [count]-sized array of VbDiskInfo structs with the information
* on those disks; this pointer must be freed by calling VbExDiskFreeInfo().
* If count=0, infos_ptr may point to NULL. If [infos_ptr] points to NULL
* because count=0 or error, it is not necessary to call VbExDiskFreeInfo().
*
* A multi-function device (such as a 4-in-1 card reader) should provide
* multiple disk handles.
*
* The firmware must not alter or free the list pointed to by [infos_ptr] until
* VbExDiskFreeInfo() is called.
*/
VbError_t VbExDiskGetInfo(VbDiskInfo **infos_ptr, uint32_t *count,
uint32_t disk_flags);
/**
* Free a disk information list [infos] previously returned by
* VbExDiskGetInfo(). If [preserve_handle] != NULL, the firmware must ensure
* that handle remains valid after this call; all other handles from the info
* list need not remain valid after this call.
*/
VbError_t VbExDiskFreeInfo(VbDiskInfo *infos,
VbExDiskHandle_t preserve_handle);
/**
* Read lba_count LBA sectors, starting at sector lba_start, from the disk,
* into the buffer.
*
* This is used for random access to the GPT. It is not for the partition
* contents. The upper limit is lba_count.
*
* If the disk handle is invalid (for example, the handle refers to a disk
* which as been removed), the function must return error but must not
* crash.
*/
VbError_t VbExDiskRead(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, void *buffer);
/**
* Write lba_count LBA sectors, starting at sector lba_start, to the disk, from
* the buffer.
*
* This is used for random access to the GPT. It does not (necessarily) access
* the streaming portion of the device.
*
* If the disk handle is invalid (for example, the handle refers to a disk
* which as been removed), the function must return error but must not
* crash.
*/
VbError_t VbExDiskWrite(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, const void *buffer);
/* Streaming read interface */
typedef void *VbExStream_t;
/**
* Open a stream on a disk
*
* @param handle Disk to open the stream against
* @param lba_start Starting sector offset within the disk to stream from
* @param lba_count Maximum extent of the stream in sectors
* @param stream out-paramter for the generated stream
*
* @return Error code, or VBERROR_SUCCESS.
*
* This is used for access to the contents of the actual partitions on the
* device. It is not used to access the GPT. The size of the content addressed
* is within streaming_lba_count.
*/
VbError_t VbExStreamOpen(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, VbExStream_t *stream_ptr);
/**
* Read from a stream on a disk
*
* @param stream Stream to read from
* @param bytes Number of bytes to read
* @param buffer Destination to read into
*
* @return Error code, or VBERROR_SUCCESS. Failure to read as much data as
* requested is an error.
*
* This is used for access to the contents of the actual partitions on the
* device. It is not used to access the GPT.
*/
VbError_t VbExStreamRead(VbExStream_t stream, uint32_t bytes, void *buffer);
/**
* Close a stream
*
* @param stream Stream to close
*/
void VbExStreamClose(VbExStream_t stream);
/*****************************************************************************/
/* Display */
/* Predefined (default) screens for VbExDisplayScreen(). */
enum VbScreenType_t {
/* Blank (clear) screen */
VB_SCREEN_BLANK = 0,
/* Developer - warning */
VB_SCREEN_DEVELOPER_WARNING = 0x101,
/* Developer - easter egg */
VB_SCREEN_DEVELOPER_EGG = 0x102,
/* Recovery - remove inserted devices */
VB_SCREEN_RECOVERY_REMOVE = 0x201,
/* Recovery - insert recovery image */
VB_SCREEN_RECOVERY_INSERT = 0x202,
/* Recovery - inserted image invalid */
VB_SCREEN_RECOVERY_NO_GOOD = 0x203,
/* Recovery - confirm dev mode */
VB_SCREEN_RECOVERY_TO_DEV = 0x204,
/* Developer - confirm normal mode */
VB_SCREEN_DEVELOPER_TO_NORM = 0x205,
/* Please wait - programming EC */
VB_SCREEN_WAIT = 0x206,
/* Confirm after DEVELOPER_TO_NORM */
VB_SCREEN_TO_NORM_CONFIRMED = 0x207,
};
/**
* Initialize and clear the display. Set width and height to the screen
* dimensions in pixels.
*/
VbError_t VbExDisplayInit(uint32_t *width, uint32_t *height);
/**
* Enable (enable!=0) or disable (enable=0) the display backlight.
*/
VbError_t VbExDisplayBacklight(uint8_t enable);
/**
* Sets the logical dimension to display.
*
* If the physical display is larger or smaller than given dimension, display
* provider may decide to scale or shift images (from VbExDisplayImage)to proper
* location.
*/
VbError_t VbExDisplaySetDimension(uint32_t width, uint32_t height);
/**
* Display a predefined screen; see VB_SCREEN_* for valid screens.
*
* This is a backup method of screen display, intended for use if the GBB does
* not contain a full set of bitmaps. It is acceptable for the backup screen
* to be simple ASCII text such as "NO GOOD" or "INSERT"; these screens should
* only be seen during development.
*/
VbError_t VbExDisplayScreen(uint32_t screen_type);
/**
* Write an image to the display, with the upper left corner at the specified
* pixel coordinates. The bitmap buffer is a pointer to the platform-dependent
* uncompressed binary blob with dimensions and format specified internally
* (for example, a raw BMP, GIF, PNG, whatever). We pass the size just for
* convenience.
*/
VbError_t VbExDisplayImage(uint32_t x, uint32_t y,
void *buffer, uint32_t buffersize);
/**
* Display a string containing debug information on the screen, rendered in a
* platform-dependent font. Should be able to handle newlines '\n' in the
* string. Firmware must support displaying at least 20 lines of text, where
* each line may be at least 80 characters long. If the firmware has its own
* debug state, it may display it to the screen below this information.
*
* NOTE: This is what we currently display when TAB is pressed. Some
* information (HWID, recovery reason) is ours; some (CMOS breadcrumbs) is
* platform-specific. If we decide to soft-render the HWID string
* (chrome-os-partner:3693), we'll need to maintain our own fonts, so we'll
* likely display it via VbExDisplayImage() above.
*/
VbError_t VbExDisplayDebugInfo(const char *info_str);
/*****************************************************************************/
/* Keyboard and switches */
/* Key codes for required non-printable-ASCII characters. */
enum VbKeyCode_t {
VB_KEY_UP = 0x100,
VB_KEY_DOWN = 0x101,
VB_KEY_LEFT = 0x102,
VB_KEY_RIGHT = 0x103,
VB_KEY_CTRL_ENTER = 0x104,
};
/* Flags for additional information.
* TODO(semenzato): consider adding flags for modifiers instead of
* making up some of the key codes above.
*/
enum VbKeyFlags_t {
VB_KEY_FLAG_TRUSTED_KEYBOARD = 1 << 0,
};
/**
* Read the next keypress from the keyboard buffer.
*
* Returns the keypress, or zero if no keypress is pending or error.
*
* The following keys must be returned as ASCII character codes:
* 0x08 Backspace
* 0x09 Tab
* 0x0D Enter (carriage return)
* 0x01 - 0x1A Ctrl+A - Ctrl+Z (yes, those alias with backspace/tab/enter)
* 0x1B Esc
* 0x20 Space
* 0x30 - 0x39 '0' - '9'
* 0x60 - 0x7A 'a' - 'z'
*
* Some extended keys must also be supported; see the VB_KEY_* defines above.
*
* Keys ('/') or key-chords (Fn+Q) not defined above may be handled in any of
* the following ways:
* 1. Filter (don't report anything if one of these keys is pressed).
* 2. Report as ASCII (if a well-defined ASCII value exists for the key).
* 3. Report as any other value in the range 0x200 - 0x2FF.
* It is not permitted to report a key as a multi-byte code (for example,
* sending an arrow key as the sequence of keys '\x1b', '[', '1', 'A'). */
uint32_t VbExKeyboardRead(void);
/**
* Same as VbExKeyboardRead(), but return extra information.
*/
uint32_t VbExKeyboardReadWithFlags(uint32_t *flags_ptr);
/**
* Return the current state of the switches specified in request_mask
*/
uint32_t VbExGetSwitches(uint32_t request_mask);
/*****************************************************************************/
/* Embedded controller (EC) */
/*
* All these functions take a devidx parameter, which indicates which embedded
* processor the call applies to. At present, only devidx=0 is valid, but
* upcoming CLs will add support for multiple devices.
*/
/**
* This is called only if the system implements a keyboard-based (virtual)
* developer switch. It must return true only if the system has an embedded
* controller which is provably running in its RO firmware at the time the
* function is called.
*/
int VbExTrustEC(int devidx);
/**
* Check if the EC is currently running rewritable code.
*
* If the EC is in RO code, sets *in_rw=0.
* If the EC is in RW code, sets *in_rw non-zero.
* If the current EC image is unknown, returns error. */
VbError_t VbExEcRunningRW(int devidx, int *in_rw);
/**
* Request the EC jump to its rewritable code. If successful, returns when the
* EC has booting its RW code far enough to respond to subsequent commands.
* Does nothing if the EC is already in its rewritable code.
*/
VbError_t VbExEcJumpToRW(int devidx);
/**
* Tell the EC to refuse another jump until it reboots. Subsequent calls to
* VbExEcJumpToRW() in this boot will fail.
*/
VbError_t VbExEcDisableJump(int devidx);
/**
* Read the SHA-256 hash of the rewriteable EC image.
*/
VbError_t VbExEcHashRW(int devidx, const uint8_t **hash, int *hash_size);
/**
* Get the expected contents of the EC image associated with the main firmware
* specified by the "select" argument.
*/
VbError_t VbExEcGetExpectedRW(int devidx, enum VbSelectFirmware_t select,
const uint8_t **image, int *image_size);
/**
* Read the SHA-256 hash of the expected contents of the EC image associated
* with the main firmware specified by the "select" argument.
*/
VbError_t VbExEcGetExpectedRWHash(int devidx, enum VbSelectFirmware_t select,
const uint8_t **hash, int *hash_size);
/**
* Update the EC rewritable image.
*/
VbError_t VbExEcUpdateRW(int devidx, const uint8_t *image, int image_size);
/**
* Lock the EC code to prevent updates until the EC is rebooted.
* Subsequent calls to VbExEcUpdateRW() this boot will fail.
*/
VbError_t VbExEcProtectRW(int devidx);
/**
* Info the EC of the boot mode selected by the AP.
* mode: Normal, Developer, or Recovery
*/
enum VbEcBootMode_t {VB_EC_NORMAL, VB_EC_DEVELOPER, VB_EC_RECOVERY };
VbError_t VbExEcEnteringMode(int devidx, enum VbEcBootMode_t mode);
/*****************************************************************************/
/* Misc */
/* Args to VbExProtectFlash() */
enum VbProtectFlash_t { VBPROTECT_RW_A, VBPROTECT_RW_B, VBPROTECT_RW_DEVKEY };
/**
* Lock a section of the BIOS flash address space to prevent updates until the
* host is rebooted. Subsequent attempts to erase or modify the specified BIOS
* image will fail. If this function is called more than once each call should
* be cumulative.
*/
VbError_t VbExProtectFlash(enum VbProtectFlash_t region);
/**
* Check if the firmware needs to shut down the system.
*
* Returns a non-zero VB_SHUTDOWN_REQUEST mask indicating the reason(s) for
* shutdown if a shutdown is being requested (see VB_SHUTDOWN_REQUEST_*), or 0
* if a shutdown is not being requested.
*
* NOTE: When we're displaying a screen, pressing the power button should shut
* down the computer. We need a way to break out of our control loop so this
* can occur cleanly.
*/
uint32_t VbExIsShutdownRequested(void);
/*
* Shutdown requested for a reason which is not defined among other
* VB_SHUTDOWN_REQUEST_* values. This must be defined as 1 for backward
* compatibility with old versions of the API.
*/
#define VB_SHUTDOWN_REQUEST_OTHER 0x00000001
/* Shutdown requested due to a lid switch being closed. */
#define VB_SHUTDOWN_REQUEST_LID_CLOSED 0x00000002
/* Shutdown requested due to a power button being pressed. */
#define VB_SHUTDOWN_REQUEST_POWER_BUTTON 0x00000004
/**
* Expose the BIOS' built-in decompression routine to the vboot wrapper. The
* caller must know how large the uncompressed data will be and must manage
* that memory. The decompression routine just puts the uncompressed data into
* the specified buffer. We pass in the size of the outbuf, and get back the
* actual size used.
*/
VbError_t VbExDecompress(void *inbuf, uint32_t in_size,
uint32_t compression_type,
void *outbuf, uint32_t *out_size);
/* Constants for compression_type */
enum {
COMPRESS_NONE = 0,
COMPRESS_EFIv1, /* The x86 BIOS only supports this */
COMPRESS_LZMA1, /* The ARM BIOS supports LZMA1 */
MAX_COMPRESS,
};
/**
* Execute legacy boot option.
*/
int VbExLegacy(void);
/* Regions for VbExRegionRead() */
enum vb_firmware_region {
VB_REGION_GBB, /* Google Binary Block - see gbbheader.h */
VB_REGION_COUNT,
};
/**
* Read data from a region of the firmware image
*
* Vboot wants access to a region, to read data from it. This function
* reads it (typically from the firmware image such as SPI flash) and
* returns the data.
*
* cparams is passed so that the boot loader has some context for the
* operation.
*
* @param cparams Common parameters, e.g. use member caller_context
* to point to useful context data
* @param region Firmware region to read
* @param offset Start offset within region
* @param size Number of bytes to read
* @param buf Place to put data
* @return VBERROR_... error, VBERROR_SUCCESS on success,
*/
VbError_t VbExRegionRead(VbCommonParams *cparams,
enum vb_firmware_region region, uint32_t offset,
uint32_t size, void *buf);
/**
* Verify Kernel Image loaded in memory.
*
* This routine is used by fastboot boot command to verify the kernel image in
* memory sent by the host device using fastboot protocol. It checks if the
* image in memory is signed using official recovery keys. In case of GBB
* override to allow full fastboot functionality, it checks image integrity, but
* does not check the image signature.
*
* @param cparams Common parameters, e.g. use member caller_context
* to point to useful context data
* @param kparams kernel params
* @param boot_image Image in memory that needs to be verified
* @param image_size Size of the image in memory
* @return VBERROR_... error, VBERROR_SUCCESS on success.
*/
VbError_t VbVerifyMemoryBootImage(VbCommonParams *cparams,
VbSelectAndLoadKernelParams *kparams,
void *boot_image,
size_t image_size);
#endif /* VBOOT_REFERENCE_VBOOT_API_H_ */