src/post.c

// 32bit code to Power On Self Test (POST) a machine.
//
// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2002  MandrakeSoft S.A.
//
// This file may be distributed under the terms of the GNU GPLv3 license.

#include "ioport.h" // PORT_*
#include "config.h" // CONFIG_*
#include "cmos.h" // CMOS_*
#include "util.h" // memset
#include "biosvar.h" // struct bios_data_area_s
#include "ata.h" // hard_drive_setup
#include "disk.h" // floppy_drive_setup
#include "memmap.h" // add_e820
#include "pic.h" // pic_setup
#include "pci.h" // create_pirtable
#include "acpi.h" // acpi_bios_init
#include "bregs.h" // struct bregs

#define bda ((struct bios_data_area_s *)MAKE_FARPTR(SEG_BDA, 0))
#define ebda ((struct extended_bios_data_area_s *)MAKE_FARPTR(SEG_EBDA, 0))

void
__set_irq(int vector, void *loc)
{
    SET_BDA(ivecs[vector].seg, SEG_BIOS);
    SET_BDA(ivecs[vector].offset, (u32)loc - BUILD_BIOS_ADDR);
}

#define set_irq(vector, func) do {              \
        extern void func (void);                \
        __set_irq(vector, func);                \
    } while (0)

static void
init_bda()
{
    dprintf(3, "init bda\n");
    memset(bda, 0, sizeof(*bda));

    SET_BDA(mem_size_kb, BASE_MEM_IN_K);

    // Initialize all vectors to a dummy handler.
    int i;
    for (i=0; i<256; i++)
        set_irq(i, dummy_iret_handler);

    // Initialize all hw vectors to a default hw handler.
    for (i=0x08; i<=0x0f; i++)
        set_irq(i, entry_hwirq);
    for (i=0x70; i<=0x77; i++)
        set_irq(i, entry_hwirq);

    // Initialize software handlers.
    set_irq(0x10, entry_10);
    set_irq(0x11, entry_11);
    set_irq(0x12, entry_12);
    set_irq(0x13, entry_13);
    set_irq(0x14, entry_14);
    set_irq(0x15, entry_15);
    set_irq(0x16, entry_16);
    set_irq(0x17, entry_17);
    set_irq(0x18, entry_18);
    set_irq(0x19, entry_19);
    set_irq(0x1a, entry_1a);
    set_irq(0x1c, entry_1c);
    set_irq(0x40, entry_40);

    // set vector 0x79 to zero
    // this is used by 'gardian angel' protection system
    SET_BDA(ivecs[0x79].seg, 0);
    SET_BDA(ivecs[0x79].offset, 0);

    __set_irq(0x1E, &diskette_param_table2);
}

static void
init_ebda()
{
    memset(ebda, 0, sizeof(*ebda));
    ebda->size = EBDA_SIZE;
    SET_BDA(ebda_seg, SEG_EBDA);
    SET_BDA(ivecs[0x41].seg, SEG_EBDA);
    SET_BDA(ivecs[0x41].offset
            , offsetof(struct extended_bios_data_area_s, fdpt[0]));
    SET_BDA(ivecs[0x46].seg, SEG_EBDA);
    SET_BDA(ivecs[0x41].offset
            , offsetof(struct extended_bios_data_area_s, fdpt[1]));
}

static void
ram_probe(void)
{
    dprintf(3, "Find memory size\n");
    if (CONFIG_COREBOOT) {
        coreboot_fill_map();
    } else {
        // On emulators, get memory size from nvram.
        u32 rs = ((inb_cmos(CMOS_MEM_EXTMEM2_LOW) << 16)
                  | (inb_cmos(CMOS_MEM_EXTMEM2_HIGH) << 24));
        if (rs)
            rs += 16 * 1024 * 1024;
        else
            rs = (((inb_cmos(CMOS_MEM_EXTMEM_LOW) << 10)
                   | (inb_cmos(CMOS_MEM_EXTMEM_HIGH) << 18))
                  + 1 * 1024 * 1024);
        SET_EBDA(ram_size, rs);
        add_e820(0, rs, E820_RAM);

        // Check for memory over 4Gig
        u64 high = ((inb_cmos(CMOS_MEM_HIGHMEM_LOW) << 16)
                    | (inb_cmos(CMOS_MEM_HIGHMEM_MID) << 24)
                    | ((u64)inb_cmos(CMOS_MEM_HIGHMEM_HIGH) << 32));
        SET_EBDA(ram_size_over4G, high);
        add_e820(0x100000000ull, high, E820_RAM);

        /* reserve 256KB BIOS area at the end of 4 GB */
        add_e820(0xfffc0000, 256*1024, E820_RESERVED);
    }

    // Don't declare any memory between 0xa0000 and 0x100000
    add_e820(0xa0000, 0x50000, E820_HOLE);

    // Mark known areas as reserved.
    add_e820((u32)MAKE_FARPTR(SEG_EBDA, 0), EBDA_SIZE * 1024, E820_RESERVED);
    add_e820(BUILD_BIOS_ADDR, BUILD_BIOS_SIZE, E820_RESERVED);

    dprintf(1, "ram_size=0x%08x\n", GET_EBDA(ram_size));
}

static void
init_bios_tables(void)
{
    if (CONFIG_COREBOOT)
        // XXX - not supported on coreboot yet.
        return;

    create_pirtable();

    mptable_init();

    smbios_init();

    acpi_bios_init();
}

static void
init_boot_vectors()
{
    if (! CONFIG_BOOT)
        return;
    dprintf(3, "init boot device ordering\n");

    // Floppy drive
    struct ipl_entry_s *ip = &ebda->ipl.table[0];
    ip->type = IPL_TYPE_FLOPPY;
    ip++;

    // First HDD
    ip->type = IPL_TYPE_HARDDISK;
    ip++;

    // CDROM
    if (CONFIG_CDROM_BOOT) {
        ip->type = IPL_TYPE_CDROM;
        ip++;
    }

    ebda->ipl.count = ip - ebda->ipl.table;
    ebda->ipl.sequence = 0xffff;
    if (CONFIG_COREBOOT) {
        // XXX - hardcode defaults for coreboot.
        ebda->ipl.bootorder = 0x00000231;
        ebda->ipl.checkfloppysig = 1;
    } else {
        // On emulators, get boot order from nvram.
        ebda->ipl.bootorder = (inb_cmos(CMOS_BIOS_BOOTFLAG2)
                               | ((inb_cmos(CMOS_BIOS_BOOTFLAG1) & 0xf0) << 4));
        if (!(inb_cmos(CMOS_BIOS_BOOTFLAG1) & 1))
            ebda->ipl.checkfloppysig = 1;
    }
}

// Main setup code.
static void
post()
{
    init_bda();
    init_ebda();

    pic_setup();
    timer_setup();
    mathcp_setup();

    smp_probe_setup();

    memmap_setup();
    ram_probe();

    vga_setup();

    kbd_setup();
    lpt_setup();
    serial_setup();
    mouse_setup();

    pci_bios_setup();
    smm_init();

    init_bios_tables();
    memmap_finalize();

    floppy_drive_setup();
    hard_drive_setup();

    init_boot_vectors();

    optionrom_setup();
}

// 32-bit entry point.
void VISIBLE32
_start()
{
    init_dma();

    debug_serial_setup();
    dprintf(1, "Start bios\n");

    // Allow writes to modify bios area (0xf0000)
    make_bios_writable();

    // Perform main setup code.
    post();

    // Present the user with a bootup menu.
    interactive_bootmenu();

    // Setup bios checksum.
    extern char bios_checksum;
    bios_checksum = -checksum((u8*)BUILD_BIOS_ADDR, BUILD_BIOS_SIZE - 1);

    // Prep for boot process.
    make_bios_readonly();

    // Invoke int 19 to start boot process.
    dprintf(3, "Jump to int19\n");
    struct bregs br;
    memset(&br, 0, sizeof(br));
    call16_int(0x19, &br);
}

// Ughh - some older gcc compilers have a bug which causes VISIBLE32
// functions to not be exported as a global variable - force _start
// to be global here.
asm(".global _start");