| // Variable layouts of bios. |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // |
| // This file may be distributed under the terms of the GNU GPLv3 license. |
| #ifndef __BIOSVAR_H |
| #define __BIOSVAR_H |
| |
| #include "types.h" // u8 |
| #include "farptr.h" // GET_FARVAR |
| #include "config.h" // CONFIG_* |
| |
| |
| /**************************************************************** |
| * Bios Data Area (BDA) |
| ****************************************************************/ |
| |
| struct ivec { |
| u16 offset; |
| u16 seg; |
| }; |
| |
| struct bios_data_area_s { |
| // 00:00 |
| struct ivec ivecs[256]; |
| // 30:00 |
| // u8 stack[256]; |
| // 40:00 |
| u16 port_com[4]; |
| u16 port_lpt[3]; |
| u16 ebda_seg; |
| // 40:10 |
| u16 equipment_list_flags; |
| u8 pad1; |
| u16 mem_size_kb; |
| u8 pad2; |
| u8 ps2_ctrl_flag; |
| u8 kbd_flag0; |
| u8 kbd_flag1; |
| u8 alt_keypad; |
| u16 kbd_buf_head; |
| u16 kbd_buf_tail; |
| // 40:1e |
| u8 kbd_buf[32]; |
| u8 floppy_recalibration_status; |
| u8 floppy_motor_status; |
| // 40:40 |
| u8 floppy_motor_counter; |
| u8 floppy_last_status; |
| u8 floppy_return_status[7]; |
| u8 video_mode; |
| u16 video_cols; |
| u16 video_pagesize; |
| u16 video_pagestart; |
| // 40:50 |
| u16 cursor_pos[8]; |
| // 40:60 |
| u16 cursor_type; |
| u8 video_page; |
| u16 crtc_address; |
| u8 video_msr; |
| u8 video_pal; |
| u16 jump_ip; |
| u16 jump_cs; |
| u8 other_6b; |
| u32 timer_counter; |
| // 40:70 |
| u8 timer_rollover; |
| u8 break_flag; |
| u16 soft_reset_flag; |
| u8 disk_last_status; |
| u8 disk_count; |
| u8 disk_control_byte; |
| u8 port_disk; |
| u8 lpt_timeout[4]; |
| u8 com_timeout[4]; |
| // 40:80 |
| u16 kbd_buf_start_offset; |
| u16 kbd_buf_end_offset; |
| u8 video_rows; |
| u16 char_height; |
| u8 video_ctl; |
| u8 video_switches; |
| u8 modeset_ctl; |
| u8 dcc_index; |
| u8 floppy_last_data_rate; |
| u8 disk_status_controller; |
| u8 disk_error_controller; |
| u8 disk_interrupt_flag; |
| u8 floppy_harddisk_info; |
| // 40:90 |
| u8 floppy_media_state[4]; |
| u8 floppy_track0; |
| u8 floppy_track1; |
| u8 kbd_mode; |
| u8 kbd_led; |
| u32 ptr_user_wait_complete_flag; |
| u32 user_wait_timeout; |
| // 40:A0 |
| u8 rtc_wait_flag; |
| } PACKED; |
| |
| // BDA floppy_recalibration_status bitdefs |
| #define FRS_TIMEOUT (1<<7) |
| |
| // BDA rtc_wait_flag bitdefs |
| #define RWS_WAIT_PENDING (1<<0) |
| #define RWS_WAIT_ELAPSED (1<<7) |
| |
| // BDA floppy_media_state bitdefs |
| #define FMS_DRIVE_STATE_MASK (0x07) |
| #define FMS_MEDIA_DRIVE_ESTABLISHED (1<<4) |
| #define FMS_DOUBLE_STEPPING (1<<5) |
| #define FMS_DATA_RATE_MASK (0xc0) |
| |
| // Accessor functions |
| #define GET_BDA(var) \ |
| GET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var) |
| #define SET_BDA(var, val) \ |
| SET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var, (val)) |
| #define CLEARBITS_BDA(var, val) do { \ |
| typeof(((struct bios_data_area_s *)0)->var) __val = GET_BDA(var); \ |
| SET_BDA(var, (__val & ~(val))); \ |
| } while (0) |
| #define SETBITS_BDA(var, val) do { \ |
| typeof(((struct bios_data_area_s *)0)->var) __val = GET_BDA(var); \ |
| SET_BDA(var, (__val | (val))); \ |
| } while (0) |
| |
| |
| /**************************************************************** |
| * Extended Bios Data Area (EBDA) |
| ****************************************************************/ |
| |
| // DPTE definition |
| struct dpte_s { |
| u16 iobase1; |
| u16 iobase2; |
| u8 prefix; |
| u8 unused; |
| u8 irq; |
| u8 blkcount; |
| u8 dma; |
| u8 pio; |
| u16 options; |
| u16 reserved; |
| u8 revision; |
| u8 checksum; |
| }; |
| |
| struct fdpt_s { |
| u16 cylinders; |
| u8 heads; |
| u8 a0h_signature; |
| u8 phys_sectors; |
| u16 precompensation; |
| u8 reserved; |
| u8 drive_control_byte; |
| u16 phys_cylinders; |
| u8 phys_heads; |
| u16 landing_zone; |
| u8 sectors; |
| u8 checksum; |
| } PACKED; |
| |
| struct extended_bios_data_area_s { |
| u8 size; |
| u8 reserved1[0x21]; |
| u32 far_call_pointer; |
| u8 mouse_flag1; |
| u8 mouse_flag2; |
| u8 mouse_data[0x08]; |
| // 0x30 |
| u8 other1[0x0d]; |
| |
| // 0x3d |
| struct fdpt_s fdpt[2]; |
| |
| // 0x5d |
| u8 other2[0xC4]; |
| |
| // 0x121 - Begin custom storage. |
| u8 ps2ctr; |
| |
| u8 cdemu_active; |
| |
| // Count of transferred sectors and bytes to/from disk |
| u16 sector_count; |
| |
| // Buffer for disk DPTE table |
| struct dpte_s dpte; |
| |
| // Locks for removable devices |
| u8 cdrom_locks[CONFIG_MAX_ATA_DEVICES]; |
| |
| u16 boot_sequence; |
| |
| // Resume stack |
| u8 resume_stack[128] __aligned(8); |
| } PACKED; |
| |
| // Accessor functions |
| #define GET_EBDA(var) \ |
| GET_FARVAR(GET_BDA(ebda_seg), ((struct extended_bios_data_area_s *)0)->var) |
| #define SET_EBDA(var, val) \ |
| SET_FARVAR(GET_BDA(ebda_seg), ((struct extended_bios_data_area_s *)0)->var, (val)) |
| static inline struct extended_bios_data_area_s * |
| get_ebda_ptr() |
| { |
| extern void *__force_link_error__get_ebda_ptr_only_in_32bit(); |
| if (MODE16) |
| return __force_link_error__get_ebda_ptr_only_in_32bit(); |
| return (void*)MAKE_FARPTR(GET_BDA(ebda_seg), 0); |
| } |
| |
| |
| /**************************************************************** |
| * Global variables |
| ****************************************************************/ |
| |
| #define GET_GLOBAL(var) \ |
| GET_VAR(CS, (var)) |
| #if MODE16 |
| extern void __force_link_error__set_global_only_in_32bit(); |
| #define SET_GLOBAL(var, val) do { \ |
| (void)(val); \ |
| __force_link_error__set_global_only_in_32bit(); \ |
| } while (0) |
| #else |
| #define SET_GLOBAL(var, val) \ |
| do { (var) = (val); } while (0) |
| #endif |
| |
| |
| /**************************************************************** |
| * Bios Config Table |
| ****************************************************************/ |
| |
| struct bios_config_table_s { |
| u16 size; |
| u8 model; |
| u8 submodel; |
| u8 biosrev; |
| u8 feature1, feature2, feature3, feature4, feature5; |
| } PACKED; |
| |
| extern struct bios_config_table_s BIOS_CONFIG_TABLE; |
| |
| #endif // __BIOSVAR_H |