Cleanup ATA code; get SATA drives working on real hardware.
Simplify await_ide code.
Only check for drq/err after device reports non-bsy.
Rewrite ata reset code. Use latest spec. Add logic for resets on
slaves without a master.
Set DH register slave bit in send_cmd - so callers don't have to set it.
There is no need for an mdelay(50) after a drive change.
Do check for non-bsy before and after drive changes.
Show error register in debug messages when ERR bit is set.
Don't check for RDY bit in ata_transfer -- ATAPI devices may not set it.
Don't use signatures to detect drive type - instead issue both
IDENTIFY_DEVICE_PACKET and IDENTIFY_DEVICE, and see which succeeds.
Be sure to wait for RDY before issuing IDENTIFY_DEVICE.
Don't reset slave if reset was just done for master.
2 files changed