blob: be2291bc7e8dc6c42c19d48d904d73acf9dc8360 [file] [log] [blame]
// System Management Mode support (on emulators)
//
// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2006 Fabrice Bellard
//
// This file may be distributed under the terms of the GNU LGPLv3 license.
#include "pci.h" // pci_config_writel
#include "util.h" // wbinvd
#include "config.h" // CONFIG_*
#include "ioport.h" // outb
#include "pci_ids.h" // PCI_VENDOR_ID_INTEL
ASM32FLAT(
".global smm_relocation_start\n"
".global smm_relocation_end\n"
".global smm_code_start\n"
".global smm_code_end\n"
" .code16\n"
/* code to relocate SMBASE to 0xa0000 */
"smm_relocation_start:\n"
" mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7efc, %ebx\n"
" addr32 mov (%ebx), %al\n" /* revision ID to see if x86_64 or x86 */
" cmp $0x64, %al\n"
" je 1f\n"
" mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7ef8, %ebx\n"
" jmp 2f\n"
"1:\n"
" mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7f00, %ebx\n"
"2:\n"
" movl $" __stringify(BUILD_SMM_ADDR) " - 0x8000, %eax\n"
" addr32 movl %eax, (%ebx)\n"
/* indicate to the BIOS that the SMM code was executed */
" mov $0x00, %al\n"
" movw $" __stringify(PORT_SMI_STATUS) ", %dx\n"
" outb %al, %dx\n"
" rsm\n"
"smm_relocation_end:\n"
/* minimal SMM code to enable or disable ACPI */
"smm_code_start:\n"
" movw $" __stringify(PORT_SMI_CMD) ", %dx\n"
" inb %dx, %al\n"
" cmp $0xf0, %al\n"
" jne 1f\n"
/* ACPI disable */
" mov $" __stringify(PORT_ACPI_PM_BASE) " + 0x04, %dx\n" /* PMCNTRL */
" inw %dx, %ax\n"
" andw $~1, %ax\n"
" outw %ax, %dx\n"
" jmp 2f\n"
"1:\n"
" cmp $0xf1, %al\n"
" jne 2f\n"
/* ACPI enable */
" mov $" __stringify(PORT_ACPI_PM_BASE) " + 0x04, %dx\n" /* PMCNTRL */
" inw %dx, %ax\n"
" orw $1, %ax\n"
" outw %ax, %dx\n"
"2:\n"
" rsm\n"
"smm_code_end:\n"
" .code32\n"
);
extern u8 smm_relocation_start, smm_relocation_end;
extern u8 smm_code_start, smm_code_end;
void
smm_init()
{
if (CONFIG_COREBOOT)
// SMM only supported on emulators.
return;
if (!CONFIG_USE_SMM)
return;
dprintf(3, "init smm\n");
// This code is hardcoded for PIIX4 Power Management device.
int bdf = pci_find_device(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82371AB_3);
if (bdf < 0)
// Device not found
return;
int i440_bdf = pci_find_device(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_82441);
if (i440_bdf < 0)
return;
/* check if SMM init is already done */
u32 value = pci_config_readl(bdf, 0x58);
if (value & (1 << 25))
return;
/* enable the SMM memory window */
pci_config_writeb(i440_bdf, 0x72, 0x02 | 0x48);
/* save original memory content */
memcpy((void *)BUILD_SMM_ADDR, (void *)BUILD_SMM_INIT_ADDR, BUILD_SMM_SIZE);
/* copy the SMM relocation code */
memcpy((void *)BUILD_SMM_INIT_ADDR, &smm_relocation_start,
&smm_relocation_end - &smm_relocation_start);
/* enable SMI generation when writing to the APMC register */
pci_config_writel(bdf, 0x58, value | (1 << 25));
/* init APM status port */
outb(0x01, PORT_SMI_STATUS);
/* raise an SMI interrupt */
outb(0x00, PORT_SMI_CMD);
/* wait until SMM code executed */
while (inb(PORT_SMI_STATUS) != 0x00)
;
/* restore original memory content */
memcpy((void *)BUILD_SMM_INIT_ADDR, (void *)BUILD_SMM_ADDR, BUILD_SMM_SIZE);
/* copy the SMM code */
memcpy((void *)BUILD_SMM_ADDR, &smm_code_start
, &smm_code_end - &smm_code_start);
wbinvd();
/* close the SMM memory window and enable normal SMM */
pci_config_writeb(i440_bdf, 0x72, 0x02 | 0x08);
}