blob: 0ca5f1b469063817315cd406c67153a57337aa4a [file] [log] [blame]
This code implements an X86 legacy bios. It is intended to be
compiled using standard gnu tools (eg, gas and gcc).
To build, one should be able to run "make" in the main directory. The
resulting file "out/rom.bin" contains the processed bios image.
The build requires gcc v4.1 or later. Some buggy versions of gcc have
issues with the '-combine' compiler option - in particular, recent
versions of Ubuntu are affected. One can use "make AVOIDCOMBINE=1" to
get around this.
Testing of images:
To test the bios under bochs, one will need to instruct bochs to use
the new bios image. Use the 'romimage' option - for example:
bochs -q 'floppya: 1_44=myfdimage.img' 'romimage: file=out/rom.bin'
To test under qemu, one will need to create a directory with all the
bios images and then overwrite the main bios image. For example:
cp /usr/share/qemu/*.bin mybiosdir/
cp out/rom.bin mybiosdir/bios.bin
Once this is setup, one can instruct qemu to use the newly created
directory for rom images. For example:
qemu -L mybiosdir/ -fda myfdimage.img
The following payloads have been tested:
Freedos - see http://www.freedos.org/ . Useful tests include: booting
from installation cdrom, installing to hard drive and floppy, making
sure hard drive and floppy boots then work. It is also useful to take
the bootable floppy and hard-drive images, write them to an el-torito
bootable cdrom using the Linux mkisofs utility, and then boot those
cdrom images.
Linux - useful hard drive image available from
http://fabrice.bellard.free.fr/qemu/linux-0.2.img.bz2 . It is also
useful to test standard distribution bootup and live cdroms.
NetBSD - useful hard drive image available from
http://nopid.free.fr/small.ffs.bz2 . It is also useful to test
standard distribution installation cdroms.
Overview of files:
The src/ directory contains the bios source code. Several of the
files are compiled twice - once for 16bit mode and once for 32bit
mode. The gcc compile option '-fwhole-program' is used to remove code
that is not needed for a particular mode. (In the code, one can use
the macros 'VISIBLE16' and 'VISIBLE32' to instruct a symbol to be
outputted in 16bit and 32bit mode respectively.)
The tools/ directory contains helper utilities for manipulating and
building the final rom.
The out/ directory is created by the build process - it contains all
temporary and final files.
Build overview:
The 16bit code is compiled via gcc to assembler (file out/blob.16.s).
The gcc "-fwhole-program" option is used to optimize the process so
that gcc can efficiently compile and discard unneeded code.
This resulting assembler code is pulled into romlayout.S. The gas
option ".code16gcc" is used prior to including the gcc generated
assembler - this option enables gcc to generate valid 16 bit code.
The romlayout.S also defines all the mandatory bios visible memory
locations.
The post code (post.c) is entered, via the function _start(), in 32bit
mode. The 16bit post vector (in romlayout.S) transitions the cpu into
32 bit mode before calling the post.c code.
In the last step of compilation, the 32 bit code is merged into the 16
bit code so that one binary file contains both. Currently, both 16bit
and 32bit code will be located in the 64K block at segment 0xf000.
GCC 16 bit limitations:
Although the 16bit code is compiled with gcc, developers need to be
aware of the environment. In particular, global variables _must_ be
treated specially.
The code has full access to stack variables and general purpose
registers. The entry code in romlayout.S will push the original
registers on the stack before calling the C code and then pop them off
(including any required changes) before returning from the interrupt.
Changes to CS, DS, and ES segment registers in C code is also safe.
Changes to other segment registers (SS, FS, GS) need to be restored
manually.
Stack variables (and pointers to stack variables) work as they
normally do in standard C code.
However, variables stored outside the stack need to be accessed via
the GET_VAR and SET_VAR macros (or one of the helper macros described
below). This is due to the 16bit segment nature of the X86 cpu when
it is in "real mode". The C entry code will set DS and SS to point to
the stack segment. Variables not on the stack need to be accessed via
an explicit segment register. Global constants (loaded into 0xf000)
can be accessed via the CS segment register. Any other access
requires altering one of the other segment registers (usually ES) and
then accessing the variable via that segment register.
There are three low-level ways to access a remote variable:
GET/SET_VAR, GET/SET_FARVAR, and GET/SET_FARPTR. The first set takes
an explicit segment descriptor (eg, "CS") and offset. The second set
will take a segment id and offset, set ES to the segment, and then
make the access via the ES segment. The last method is similar to the
second, except it takes a pointer that would be valid in 32-bit mode
instead of a segment/offset pair.
Most BIOS variables are stored in the "BDA" or "EBDA" memory areas.
Because this is common, two sets of helper macros (GET/SET_BDA and
GET/SET_EBDA) are available to simplify these accesses.
GCC 16 bit stack limitations:
Another limitation of gcc is its use of 32-bit temporaries. Gcc will
allocate 32-bits of space for every variable - even if that variable
is only defined as a 'u8' or 'u16'. If one is not careful, using too
much stack space can break old DOS applications.
There does not appear to be explicit documentation on the minimum
stack space available for bios calls. However, Freedos has been
observed to call into the bios with less than 150 bytes of stack space
available.
Note that the post code and boot code (irq 18/19) do not have a stack
limitation because the entry points for these functions reset the
stack to a known state. Only the general purpose 16-bit service entry
points are affected.
There are some ways to reduce stack usage: making sure functions are
tail-recursive often helps, reducing the number of parameters passed
to functions often helps, sometimes reordering variable declarations
helps, inlining of functions can sometimes help, and passing of packed
structures can also help.
Debugging the bios:
The bios will output information messages to a special debug port.
Under qemu, one can view these messages by enabling the '#define
DEBUG_BIOS' definition in 'qemu/hw/pc.c'. Once this is done (and qemu
is recompiled), one should see status messages on the console.
The gdb-server mechanism of qemu is also useful. One can use gdb with
qemu to debug system images. To use this, add '-s -S' to the qemu
command line. For example:
qemu -L mybiosdir/ -fda myfdimage.img -s -S
Then, in another session, run gdb with either out/rom16.o (to debug
bios 16bit code) or out/rom32.o (to debug bios 32bit code). For
example:
gdb out/rom16.o
Once in gdb, use the command "target remote localhost:1234" to have
gdb connect to qemu. See the qemu documentation for more information
on using gdb and qemu in this mode. Note that gdb seems to get
breakpoints confused when the cpu is in 16-bit real mode. This makes
stepping through the program difficult (though 'step instruction'
still works). Also, one may need to set 16bit break points at both
the cpu address and memory address (eg, break *0x1234 ; break
*0xf1234).