| // Virtio block boot support. |
| // |
| // Copyright (C) 2010 Red Hat Inc. |
| // |
| // Authors: |
| // Gleb Natapov <gnatapov@redhat.com> |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "util.h" // dprintf |
| #include "pci.h" // foreachpci |
| #include "config.h" // CONFIG_* |
| #include "biosvar.h" // GET_GLOBAL |
| #include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK |
| #include "pci_regs.h" // PCI_VENDOR_ID |
| #include "boot.h" // boot_add_hd |
| #include "virtio-pci.h" |
| #include "virtio-ring.h" |
| #include "virtio-blk.h" |
| #include "disk.h" |
| |
| struct virtiodrive_s { |
| struct drive_s drive; |
| struct vring_virtqueue *vq; |
| u16 ioaddr; |
| }; |
| |
| static int |
| virtio_blk_op(struct disk_op_s *op, int write) |
| { |
| struct virtiodrive_s *vdrive_g = |
| container_of(op->drive_g, struct virtiodrive_s, drive); |
| struct vring_virtqueue *vq = GET_GLOBAL(vdrive_g->vq); |
| struct virtio_blk_outhdr hdr = { |
| .type = write ? VIRTIO_BLK_T_OUT : VIRTIO_BLK_T_IN, |
| .ioprio = 0, |
| .sector = op->lba, |
| }; |
| u8 status = VIRTIO_BLK_S_UNSUPP; |
| struct vring_list sg[] = { |
| { |
| .addr = MAKE_FLATPTR(GET_SEG(SS), &hdr), |
| .length = sizeof(hdr), |
| }, |
| { |
| .addr = op->buf_fl, |
| .length = GET_GLOBAL(vdrive_g->drive.blksize) * op->count, |
| }, |
| { |
| .addr = MAKE_FLATPTR(GET_SEG(SS), &status), |
| .length = sizeof(status), |
| }, |
| }; |
| |
| /* Add to virtqueue and kick host */ |
| if (write) |
| vring_add_buf(vq, sg, 2, 1, 0, 0); |
| else |
| vring_add_buf(vq, sg, 1, 2, 0, 0); |
| vring_kick(GET_GLOBAL(vdrive_g->ioaddr), vq, 1); |
| |
| /* Wait for reply */ |
| while (!vring_more_used(vq)) |
| usleep(5); |
| |
| /* Reclaim virtqueue element */ |
| vring_get_buf(vq, NULL); |
| |
| /* Clear interrupt status register. Avoid leaving interrupts stuck if |
| * VRING_AVAIL_F_NO_INTERRUPT was ignored and interrupts were raised. |
| */ |
| vp_get_isr(GET_GLOBAL(vdrive_g->ioaddr)); |
| |
| return status == VIRTIO_BLK_S_OK ? DISK_RET_SUCCESS : DISK_RET_EBADTRACK; |
| } |
| |
| int |
| process_virtio_blk_op(struct disk_op_s *op) |
| { |
| if (! CONFIG_VIRTIO_BLK || CONFIG_COREBOOT) |
| return 0; |
| switch (op->command) { |
| case CMD_READ: |
| return virtio_blk_op(op, 0); |
| case CMD_WRITE: |
| return virtio_blk_op(op, 1); |
| case CMD_FORMAT: |
| case CMD_RESET: |
| case CMD_ISREADY: |
| case CMD_VERIFY: |
| case CMD_SEEK: |
| return DISK_RET_SUCCESS; |
| default: |
| op->count = 0; |
| return DISK_RET_EPARAM; |
| } |
| } |
| |
| static void |
| init_virtio_blk(struct pci_device *pci) |
| { |
| u16 bdf = pci->bdf; |
| dprintf(1, "found virtio-blk at %x:%x\n", pci_bdf_to_bus(bdf), |
| pci_bdf_to_dev(bdf)); |
| struct virtiodrive_s *vdrive_g = malloc_fseg(sizeof(*vdrive_g)); |
| struct vring_virtqueue *vq = memalign_low(PAGE_SIZE, sizeof(*vq)); |
| if (!vdrive_g || !vq) { |
| warn_noalloc(); |
| goto fail; |
| } |
| memset(vdrive_g, 0, sizeof(*vdrive_g)); |
| memset(vq, 0, sizeof(*vq)); |
| vdrive_g->drive.type = DTYPE_VIRTIO_BLK; |
| vdrive_g->drive.cntl_id = bdf; |
| vdrive_g->vq = vq; |
| |
| u16 ioaddr = pci_config_readl(bdf, PCI_BASE_ADDRESS_0) & |
| PCI_BASE_ADDRESS_IO_MASK; |
| |
| vdrive_g->ioaddr = ioaddr; |
| |
| vp_reset(ioaddr); |
| vp_set_status(ioaddr, VIRTIO_CONFIG_S_ACKNOWLEDGE | |
| VIRTIO_CONFIG_S_DRIVER ); |
| |
| if (vp_find_vq(ioaddr, 0, vdrive_g->vq) < 0 ) { |
| dprintf(1, "fail to find vq for virtio-blk %x:%x\n", |
| pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf)); |
| goto fail; |
| } |
| |
| struct virtio_blk_config cfg; |
| vp_get(ioaddr, 0, &cfg, sizeof(cfg)); |
| |
| u32 f = vp_get_features(ioaddr); |
| vdrive_g->drive.blksize = (f & (1 << VIRTIO_BLK_F_BLK_SIZE)) ? |
| cfg.blk_size : DISK_SECTOR_SIZE; |
| |
| vdrive_g->drive.sectors = cfg.capacity; |
| dprintf(3, "virtio-blk %x:%x blksize=%d sectors=%u\n", |
| pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf), |
| vdrive_g->drive.blksize, (u32)vdrive_g->drive.sectors); |
| |
| if (vdrive_g->drive.blksize != DISK_SECTOR_SIZE) { |
| dprintf(1, "virtio-blk %x:%x block size %d is unsupported\n", |
| pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf), |
| vdrive_g->drive.blksize); |
| goto fail; |
| } |
| |
| vdrive_g->drive.pchs.cylinders = cfg.cylinders; |
| vdrive_g->drive.pchs.heads = cfg.heads; |
| vdrive_g->drive.pchs.spt = cfg.sectors; |
| char *desc = znprintf(MAXDESCSIZE, "Virtio disk PCI:%x:%x", |
| pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf)); |
| |
| boot_add_hd(&vdrive_g->drive, desc, bootprio_find_pci_device(pci)); |
| |
| vp_set_status(ioaddr, VIRTIO_CONFIG_S_ACKNOWLEDGE | |
| VIRTIO_CONFIG_S_DRIVER | VIRTIO_CONFIG_S_DRIVER_OK); |
| return; |
| |
| fail: |
| free(vdrive_g); |
| free(vq); |
| } |
| |
| void |
| virtio_blk_setup(void) |
| { |
| ASSERT32FLAT(); |
| if (! CONFIG_VIRTIO_BLK || CONFIG_COREBOOT) |
| return; |
| |
| dprintf(3, "init virtio-blk\n"); |
| |
| struct pci_device *pci; |
| foreachpci(pci) { |
| if (pci->vendor != PCI_VENDOR_ID_REDHAT_QUMRANET |
| || pci->device != PCI_DEVICE_ID_VIRTIO_BLK) |
| continue; |
| init_virtio_blk(pci); |
| } |
| } |