| // Low level AHCI disk access |
| // |
| // Copyright (C) 2010 Gerd Hoffmann <kraxel@redhat.com> |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "types.h" // u8 |
| #include "ioport.h" // inb |
| #include "util.h" // dprintf |
| #include "biosvar.h" // GET_EBDA |
| #include "pci.h" // foreachpci |
| #include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER |
| #include "pci_regs.h" // PCI_INTERRUPT_LINE |
| #include "boot.h" // add_bcv_hd |
| #include "disk.h" // struct ata_s |
| #include "ata.h" // ATA_CB_STAT |
| #include "ahci.h" // CDB_CMD_READ_10 |
| #include "blockcmd.h" // CDB_CMD_READ_10 |
| |
| #define AHCI_MAX_RETRIES 5 |
| |
| /**************************************************************** |
| * these bits must run in both 16bit and 32bit modes |
| ****************************************************************/ |
| |
| // prepare sata command fis |
| static void sata_prep_simple(struct sata_cmd_fis *fis, u8 command) |
| { |
| memset_fl(fis, 0, sizeof(*fis)); |
| SET_FLATPTR(fis->command, command); |
| } |
| |
| static void sata_prep_readwrite(struct sata_cmd_fis *fis, |
| struct disk_op_s *op, int iswrite) |
| { |
| u64 lba = op->lba; |
| u8 command; |
| |
| memset_fl(fis, 0, sizeof(*fis)); |
| |
| if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { |
| SET_FLATPTR(fis->sector_count2, op->count >> 8); |
| SET_FLATPTR(fis->lba_low2, lba >> 24); |
| SET_FLATPTR(fis->lba_mid2, lba >> 32); |
| SET_FLATPTR(fis->lba_high2, lba >> 40); |
| lba &= 0xffffff; |
| command = (iswrite ? ATA_CMD_WRITE_DMA_EXT |
| : ATA_CMD_READ_DMA_EXT); |
| } else { |
| command = (iswrite ? ATA_CMD_WRITE_DMA |
| : ATA_CMD_READ_DMA); |
| } |
| SET_FLATPTR(fis->feature, 1); /* dma */ |
| SET_FLATPTR(fis->command, command); |
| SET_FLATPTR(fis->sector_count, op->count); |
| SET_FLATPTR(fis->lba_low, lba); |
| SET_FLATPTR(fis->lba_mid, lba >> 8); |
| SET_FLATPTR(fis->lba_high, lba >> 16); |
| SET_FLATPTR(fis->device, ((lba >> 24) & 0xf) | ATA_CB_DH_LBA); |
| } |
| |
| static void sata_prep_atapi(struct sata_cmd_fis *fis, u16 blocksize) |
| { |
| memset_fl(fis, 0, sizeof(*fis)); |
| SET_FLATPTR(fis->command, ATA_CMD_PACKET); |
| SET_FLATPTR(fis->feature, 1); /* dma */ |
| SET_FLATPTR(fis->lba_mid, blocksize); |
| SET_FLATPTR(fis->lba_high, blocksize >> 8); |
| } |
| |
| // ahci register access helpers |
| static u32 ahci_ctrl_readl(struct ahci_ctrl_s *ctrl, u32 reg) |
| { |
| u32 addr = GET_GLOBALFLAT(ctrl->iobase) + reg; |
| return pci_readl(addr); |
| } |
| |
| static void ahci_ctrl_writel(struct ahci_ctrl_s *ctrl, u32 reg, u32 val) |
| { |
| u32 addr = GET_GLOBALFLAT(ctrl->iobase) + reg; |
| pci_writel(addr, val); |
| } |
| |
| static u32 ahci_port_to_ctrl(u32 pnr, u32 port_reg) |
| { |
| u32 ctrl_reg = 0x100; |
| ctrl_reg += pnr * 0x80; |
| ctrl_reg += port_reg; |
| return ctrl_reg; |
| } |
| |
| static u32 ahci_port_readl(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg) |
| { |
| u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); |
| return ahci_ctrl_readl(ctrl, ctrl_reg); |
| } |
| |
| static void ahci_port_writel(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg, u32 val) |
| { |
| u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); |
| ahci_ctrl_writel(ctrl, ctrl_reg, val); |
| } |
| |
| // submit ahci command + wait for result |
| static int ahci_command(struct ahci_port_s *port, int iswrite, int isatapi, |
| void *buffer, u32 bsize) |
| { |
| u32 val, status, success, flags; |
| struct ahci_ctrl_s *ctrl = GET_GLOBAL(port->ctrl); |
| struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); |
| struct ahci_fis_s *fis = GET_GLOBAL(port->fis); |
| struct ahci_list_s *list = GET_GLOBAL(port->list); |
| u32 pnr = GET_GLOBAL(port->pnr); |
| |
| SET_FLATPTR(cmd->fis.reg, 0x27); |
| SET_FLATPTR(cmd->fis.pmp_type, (1 << 7)); /* cmd fis */ |
| SET_FLATPTR(cmd->prdt[0].base, ((u32)buffer)); |
| SET_FLATPTR(cmd->prdt[0].baseu, 0); |
| SET_FLATPTR(cmd->prdt[0].flags, bsize-1); |
| |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_START); |
| |
| if (ahci_port_readl(ctrl, pnr, PORT_CMD_ISSUE)) |
| return -1; |
| |
| flags = ((1 << 16) | /* one prd entry */ |
| (1 << 10) | /* clear busy on ok */ |
| (iswrite ? (1 << 6) : 0) | |
| (isatapi ? (1 << 5) : 0) | |
| (4 << 0)); /* fis length (dwords) */ |
| SET_FLATPTR(list[0].flags, flags); |
| SET_FLATPTR(list[0].bytes, bsize); |
| SET_FLATPTR(list[0].base, ((u32)(cmd))); |
| SET_FLATPTR(list[0].baseu, 0); |
| |
| dprintf(2, "AHCI/%d: send cmd ...\n", pnr); |
| SET_FLATPTR(fis->rfis[2], 0); |
| ahci_port_writel(ctrl, pnr, PORT_SCR_ACT, 1); |
| ahci_port_writel(ctrl, pnr, PORT_CMD_ISSUE, 1); |
| while (ahci_port_readl(ctrl, pnr, PORT_CMD_ISSUE)) { |
| yield(); |
| } |
| while ((status = GET_FLATPTR(fis->rfis[2])) == 0) { |
| yield(); |
| } |
| |
| success = (0x00 == (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | |
| ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR)) && |
| ATA_CB_STAT_RDY == (status & (ATA_CB_STAT_RDY))); |
| dprintf(2, "AHCI/%d: ... finished, status 0x%x, %s\n", pnr, |
| status, success ? "OK" : "ERROR"); |
| return success ? 0 : -1; |
| } |
| |
| #define CDROM_CDB_SIZE 12 |
| |
| int ahci_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) |
| { |
| if (! CONFIG_AHCI) |
| return 0; |
| |
| struct ahci_port_s *port = container_of( |
| op->drive_g, struct ahci_port_s, drive); |
| struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); |
| u8 *atapi = cdbcmd; |
| int i, rc; |
| |
| sata_prep_atapi(&cmd->fis, blocksize); |
| for (i = 0; i < CDROM_CDB_SIZE; i++) { |
| SET_FLATPTR(cmd->atapi[i], atapi[i]); |
| } |
| rc = ahci_command(port, 0, 1, op->buf_fl, |
| op->count * blocksize); |
| if (rc < 0) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // read/write count blocks from a harddrive. |
| static int |
| ahci_disk_readwrite(struct disk_op_s *op, int iswrite) |
| { |
| struct ahci_port_s *port = container_of( |
| op->drive_g, struct ahci_port_s, drive); |
| struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); |
| int rc; |
| |
| sata_prep_readwrite(&cmd->fis, op, iswrite); |
| rc = ahci_command(port, iswrite, 0, op->buf_fl, |
| op->count * DISK_SECTOR_SIZE); |
| dprintf(2, "ahci disk %s, lba %6x, count %3x, buf %p, rc %d\n", |
| iswrite ? "write" : "read", (u32)op->lba, op->count, op->buf_fl, rc); |
| if (rc < 0) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // command demuxer |
| int process_ahci_op(struct disk_op_s *op) |
| { |
| struct ahci_port_s *port; |
| u32 atapi; |
| |
| if (!CONFIG_AHCI) |
| return 0; |
| |
| port = container_of(op->drive_g, struct ahci_port_s, drive); |
| atapi = GET_GLOBAL(port->atapi); |
| |
| if (atapi) { |
| switch (op->command) { |
| case CMD_READ: |
| return cdb_read(op); |
| case CMD_WRITE: |
| case CMD_FORMAT: |
| return DISK_RET_EWRITEPROTECT; |
| case CMD_RESET: |
| /* FIXME: what should we do here? */ |
| case CMD_VERIFY: |
| case CMD_SEEK: |
| return DISK_RET_SUCCESS; |
| default: |
| dprintf(1, "AHCI: unknown cdrom command %d\n", op->command); |
| op->count = 0; |
| return DISK_RET_EPARAM; |
| } |
| } else { |
| switch (op->command) { |
| case CMD_READ: |
| return ahci_disk_readwrite(op, 0); |
| case CMD_WRITE: |
| return ahci_disk_readwrite(op, 1); |
| case CMD_RESET: |
| /* FIXME: what should we do here? */ |
| case CMD_FORMAT: |
| case CMD_VERIFY: |
| case CMD_SEEK: |
| return DISK_RET_SUCCESS; |
| default: |
| dprintf(1, "AHCI: unknown disk command %d\n", op->command); |
| op->count = 0; |
| return DISK_RET_EPARAM; |
| } |
| } |
| } |
| |
| /**************************************************************** |
| * everything below is pure 32bit code |
| ****************************************************************/ |
| |
| static void |
| ahci_port_reset(struct ahci_ctrl_s *ctrl, u32 pnr) |
| { |
| u32 val, count = 0; |
| |
| /* disable FIS + CMD */ |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| while (val & (PORT_CMD_FIS_RX | PORT_CMD_START | |
| PORT_CMD_FIS_ON | PORT_CMD_LIST_ON) && |
| count < AHCI_MAX_RETRIES) { |
| val &= ~(PORT_CMD_FIS_RX | PORT_CMD_START); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val); |
| ndelay(500); |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| count++; |
| } |
| |
| /* clear status */ |
| val = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); |
| if (val) |
| ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, val); |
| |
| /* disable + clear IRQs */ |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_MASK, val); |
| val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); |
| if (val) |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); |
| } |
| |
| static int |
| ahci_port_probe(struct ahci_ctrl_s *ctrl, u32 pnr) |
| { |
| u32 val, count = 0; |
| |
| val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); |
| while (val & ((1 << 7) /* BSY */ | |
| (1 << 3) /* DRQ */)) { |
| ndelay(500); |
| val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); |
| count++; |
| if (count >= AHCI_MAX_RETRIES) |
| return -1; |
| } |
| |
| val = ahci_port_readl(ctrl, pnr, PORT_SCR_STAT); |
| if ((val & 0x07) != 0x03) |
| return -1; |
| return 0; |
| } |
| |
| #define MAXMODEL 40 |
| |
| static struct ahci_port_s* |
| ahci_port_init(struct ahci_ctrl_s *ctrl, u32 pnr) |
| { |
| struct ahci_port_s *port = malloc_fseg(sizeof(*port)); |
| char model[MAXMODEL+1]; |
| u16 buffer[256]; |
| u32 val; |
| int rc; |
| |
| if (!port) { |
| warn_noalloc(); |
| return NULL; |
| } |
| port->pnr = pnr; |
| port->ctrl = ctrl; |
| port->list = memalign_low(1024, 1024); |
| port->fis = memalign_low(256, 256); |
| port->cmd = memalign_low(256, 256); |
| if (port->list == NULL || port->fis == NULL || port->cmd == NULL) { |
| warn_noalloc(); |
| return NULL; |
| } |
| memset(port->list, 0, 1024); |
| memset(port->fis, 0, 256); |
| memset(port->cmd, 0, 256); |
| |
| ahci_port_writel(ctrl, pnr, PORT_LST_ADDR, (u32)port->list); |
| ahci_port_writel(ctrl, pnr, PORT_FIS_ADDR, (u32)port->fis); |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_FIS_RX); |
| |
| sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_PACKET_DEVICE); |
| rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); |
| if (rc == 0) { |
| port->atapi = 1; |
| } else { |
| port->atapi = 0; |
| sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_DEVICE); |
| rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); |
| if (rc < 0) |
| goto err; |
| } |
| |
| port->drive.type = DTYPE_AHCI; |
| port->drive.cntl_id = pnr; |
| port->drive.removable = (buffer[0] & 0x80) ? 1 : 0; |
| port->drive.desc = malloc_tmp(MAXDESCSIZE); |
| if (!port->drive.desc) { |
| warn_noalloc(); |
| return NULL; |
| } |
| |
| if (!port->atapi) { |
| // found disk (ata) |
| port->drive.blksize = DISK_SECTOR_SIZE; |
| port->drive.pchs.cylinders = buffer[1]; |
| port->drive.pchs.heads = buffer[3]; |
| port->drive.pchs.spt = buffer[6]; |
| |
| u64 sectors; |
| if (buffer[83] & (1 << 10)) // word 83 - lba48 support |
| sectors = *(u64*)&buffer[100]; // word 100-103 |
| else |
| sectors = *(u32*)&buffer[60]; // word 60 and word 61 |
| port->drive.sectors = sectors; |
| u64 adjsize = sectors >> 11; |
| char adjprefix = 'M'; |
| if (adjsize >= (1 << 16)) { |
| adjsize >>= 10; |
| adjprefix = 'G'; |
| } |
| snprintf(port->drive.desc, MAXDESCSIZE |
| , "AHCI/%d: %s ATA-%d Hard-Disk (%u %ciBytes)" |
| , port->pnr |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer) |
| , (u32)adjsize, adjprefix); |
| |
| // Setup disk geometry translation. |
| setup_translation(&port->drive); |
| // Register with bcv system. |
| add_bcv_internal(&port->drive); |
| } else { |
| // found cdrom (atapi) |
| port->drive.blksize = CDROM_SECTOR_SIZE; |
| port->drive.sectors = (u64)-1; |
| u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; |
| snprintf(port->drive.desc, MAXDESCSIZE, "AHCI/%d: %s ATAPI-%d %s" |
| , port->pnr |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer) |
| , (iscd ? "DVD/CD" : "Device")); |
| |
| // fill cdidmap |
| if (iscd) |
| map_cd_drive(&port->drive); |
| } |
| dprintf(1, "%s\n", port->drive.desc); |
| |
| return port; |
| |
| err: |
| dprintf(1, "AHCI/%d: init failure, reset\n", port->pnr); |
| ahci_port_reset(ctrl, pnr); |
| return NULL; |
| } |
| |
| // Detect any drives attached to a given controller. |
| static void |
| ahci_detect(void *data) |
| { |
| struct ahci_ctrl_s *ctrl = data; |
| struct ahci_port_s *port; |
| u32 pnr, max; |
| int rc; |
| |
| max = ctrl->caps & 0x1f; |
| for (pnr = 0; pnr <= max; pnr++) { |
| if (!(ctrl->ports & (1 << pnr))) |
| continue; |
| dprintf(2, "AHCI/%d: probing\n", pnr); |
| ahci_port_reset(ctrl, pnr); |
| rc = ahci_port_probe(ctrl, pnr); |
| dprintf(1, "AHCI/%d: link %s\n", pnr, rc == 0 ? "up" : "down"); |
| if (rc != 0) |
| continue; |
| port = ahci_port_init(ctrl, pnr); |
| } |
| } |
| |
| // Initialize an ata controller and detect its drives. |
| static void |
| ahci_init_controller(int bdf) |
| { |
| struct ahci_ctrl_s *ctrl = malloc_fseg(sizeof(*ctrl)); |
| u32 val; |
| |
| if (!ctrl) { |
| warn_noalloc(); |
| return; |
| } |
| ctrl->pci_bdf = bdf; |
| ctrl->iobase = pci_config_readl(bdf, PCI_BASE_ADDRESS_5); |
| ctrl->irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); |
| dprintf(1, "AHCI controller at %02x.%x, iobase %x, irq %d\n", |
| bdf >> 3, bdf & 7, ctrl->iobase, ctrl->irq); |
| |
| pci_config_maskw(bdf, PCI_COMMAND, 0, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| |
| val = ahci_ctrl_readl(ctrl, HOST_CTL); |
| ahci_ctrl_writel(ctrl, HOST_CTL, val | HOST_CTL_AHCI_EN); |
| |
| ctrl->caps = ahci_ctrl_readl(ctrl, HOST_CAP); |
| ctrl->ports = ahci_ctrl_readl(ctrl, HOST_PORTS_IMPL); |
| dprintf(2, "AHCI: cap 0x%x, ports_impl 0x%x\n", |
| ctrl->caps, ctrl->ports); |
| |
| run_thread(ahci_detect, ctrl); |
| } |
| |
| // Locate and init ahci controllers. |
| static void |
| ahci_init(void) |
| { |
| // Scan PCI bus for ATA adapters |
| int bdf, max; |
| foreachpci(bdf, max) { |
| if (pci_config_readw(bdf, PCI_CLASS_DEVICE) != PCI_CLASS_STORAGE_SATA) |
| continue; |
| if (pci_config_readb(bdf, PCI_CLASS_PROG) != 1 /* AHCI rev 1 */) |
| continue; |
| ahci_init_controller(bdf); |
| } |
| } |
| |
| void |
| ahci_setup(void) |
| { |
| ASSERT32FLAT(); |
| if (!CONFIG_AHCI) |
| return; |
| |
| dprintf(3, "init ahci\n"); |
| ahci_init(); |
| } |