| /* |
| * MemTest86+ V5 Specific code (GPL V2.0) |
| * By Samuel DEMEULEMEESTER, sdemeule@memtest.org |
| * http://www.canardpc.com - http://www.memtest.org |
| * ------------------------------------------------ |
| * config.h - MemTest-86 Version 3.3 |
| * |
| * Compile time configuration options |
| * |
| * Released under version 2 of the Gnu Public License. |
| * By Chris Brady |
| */ |
| |
| /* CONSERVATIVE_SMP - If set to 0, SMP will be enabled by default */ |
| /* Might be enabled in future revision after extensive testing */ |
| /* In all cases, SMP is disabled by defaut on server platform */ |
| #define CONSERVATIVE_SMP 1 |
| |
| /* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */ |
| #define BEEP_MODE 0 |
| |
| /* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */ |
| #define BEEP_END_NO_ERROR 0 |
| |
| /* PARITY_MEM - Enables support for reporting memory parity errors */ |
| /* Experimental, normally enabled */ |
| #define PARITY_MEM |
| |
| /* SERIAL_CONSOLE_DEFAULT - The default state of the serial console. */ |
| /* This is normally off since it slows down testing. Change to a 1 */ |
| /* to enable. */ |
| #define SERIAL_CONSOLE_DEFAULT 0 |
| |
| /* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ |
| #define SERIAL_TTY 0 |
| |
| /* SERIAL_BAUD_RATE - Baud rate for the serial console */ |
| #define SERIAL_BAUD_RATE 9600 |
| |
| /* SCRN_DEBUG - extra check for SCREEN_BUFFER |
| */ |
| /* #define SCRN_DEBUG */ |
| |
| /* APM - Turns off APM at boot time to avoid blanking the screen */ |
| /* Normally enabled */ |
| #define APM_OFF |
| |
| /* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */ |
| /* and mouse support*/ |
| /* Normally enabled */ |
| #define USB_WAR |
| |