blob: aa4c9fb7928c819b14ced7f03abf8f770f51a1c3 [file] [log] [blame]
/*
* MemTest86+ V5 Specific code (GPL V2.0)
* By Samuel DEMEULEMEESTER, sdemeule@memtest.org
* http://www.canardpc.com - http://www.memtest.org
* ------------------------------------------------
* config.h - MemTest-86 Version 3.3
*
* Compile time configuration options
*
* Released under version 2 of the Gnu Public License.
* By Chris Brady
*/
/* CONSERVATIVE_SMP - If set to 0, SMP will be enabled by default */
/* Might be enabled in future revision after extensive testing */
/* In all cases, SMP is disabled by defaut on server platform */
#define CONSERVATIVE_SMP 1
/* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
#define BEEP_MODE 0
/* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
#define BEEP_END_NO_ERROR 0
/* PARITY_MEM - Enables support for reporting memory parity errors */
/* Experimental, normally enabled */
#define PARITY_MEM
/* SERIAL_CONSOLE_DEFAULT - The default state of the serial console. */
/* This is normally off since it slows down testing. Change to a 1 */
/* to enable. */
#define SERIAL_CONSOLE_DEFAULT 0
/* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */
#define SERIAL_TTY 0
/* SERIAL_BAUD_RATE - Baud rate for the serial console */
#define SERIAL_BAUD_RATE 9600
/* SCRN_DEBUG - extra check for SCREEN_BUFFER
*/
/* #define SCRN_DEBUG */
/* APM - Turns off APM at boot time to avoid blanking the screen */
/* Normally enabled */
#define APM_OFF
/* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */
/* and mouse support*/
/* Normally enabled */
#define USB_WAR