blob: c3814aab6d84b9b93951d9e92aff8e6d101a2343 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2008 Peter Stuge <peter@stuge.se>
* Copyright (C) 2009,2010 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#if defined(__i386__) || defined(__x86_64__)
#include <stdlib.h>
#include "flash.h"
#include "chipdrivers.h"
#include "programmer.h"
#include "hwaccess.h"
#include "spi.h"
#define WBSIO_PORT1 0x2e
#define WBSIO_PORT2 0x4e
struct wbsio_spi_data {
uint16_t spibase;
};
static uint16_t wbsio_get_spibase(uint16_t port)
{
uint8_t id;
uint16_t flashport = 0;
w836xx_ext_enter(port);
id = sio_read(port, 0x20);
if (id != 0xa0) {
msg_perr("\nW83627 not found at 0x%x, id=0x%02x want=0xa0.\n", port, id);
goto done;
}
if (0 == (sio_read(port, 0x24) & 2)) {
msg_perr("\nW83627 found at 0x%x, but SPI pins are not enabled. (CR[0x24] bit 1=0)\n", port);
goto done;
}
sio_write(port, 0x07, 0x06);
if (0 == (sio_read(port, 0x30) & 1)) {
msg_perr("\nW83627 found at 0x%x, but SPI is not enabled. (LDN6[0x30] bit 0=0)\n", port);
goto done;
}
flashport = (sio_read(port, 0x62) << 8) | sio_read(port, 0x63);
done:
w836xx_ext_leave(port);
return flashport;
}
/* W83627DHG has 11 command modes:
* 1=1 command only
* 2=1 command+1 data write
* 3=1 command+2 data read
* 4=1 command+3 address
* 5=1 command+3 address+1 data write
* 6=1 command+3 address+4 data write
* 7=1 command+3 address+1 dummy address inserted by wbsio+4 data read
* 8=1 command+3 address+1 data read
* 9=1 command+3 address+2 data read
* a=1 command+3 address+3 data read
* b=1 command+3 address+4 data read
*
* mode[7:4] holds the command mode
* mode[3:0] holds SPI address bits [19:16]
*
* The Winbond SPI master only supports 20 bit addresses on the SPI bus. :\
* Would one more byte of RAM in the chip (to get all 24 bits) really make
* such a big difference?
*/
static int wbsio_spi_send_command(const struct flashctx *flash, unsigned int writecnt,
unsigned int readcnt,
const unsigned char *writearr,
unsigned char *readarr)
{
unsigned int i;
uint8_t mode = 0;
msg_pspew("%s:", __func__);
const struct wbsio_spi_data *data =
(const struct wbsio_spi_data *)flash->mst->spi.data;
if (1 == writecnt && 0 == readcnt) {
mode = 0x10;
} else if (2 == writecnt && 0 == readcnt) {
OUTB(writearr[1], data->spibase + 4);
msg_pspew(" data=0x%02x", writearr[1]);
mode = 0x20;
} else if (1 == writecnt && 2 == readcnt) {
mode = 0x30;
} else if (4 == writecnt && 0 == readcnt) {
msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < writecnt; i++) {
OUTB(writearr[i], data->spibase + i);
msg_pspew("%02x", writearr[i]);
}
mode = 0x40 | (writearr[1] & 0x0f);
} else if (5 == writecnt && 0 == readcnt) {
msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < 4; i++) {
OUTB(writearr[i], data->spibase + i);
msg_pspew("%02x", writearr[i]);
}
OUTB(writearr[i], data->spibase + i);
msg_pspew(" data=0x%02x", writearr[i]);
mode = 0x50 | (writearr[1] & 0x0f);
} else if (8 == writecnt && 0 == readcnt) {
msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < 4; i++) {
OUTB(writearr[i], data->spibase + i);
msg_pspew("%02x", writearr[i]);
}
msg_pspew(" data=0x");
for (; i < writecnt; i++) {
OUTB(writearr[i], data->spibase + i);
msg_pspew("%02x", writearr[i]);
}
mode = 0x60 | (writearr[1] & 0x0f);
} else if (5 == writecnt && 4 == readcnt) {
/* XXX: TODO not supported by flashrom infrastructure!
* This mode, 7, discards the fifth byte in writecnt,
* but since we can not express that in flashrom, fail
* the operation for now.
*/
;
} else if (4 == writecnt && readcnt >= 1 && readcnt <= 4) {
msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < writecnt; i++) {
OUTB(writearr[i], data->spibase + i);
msg_pspew("%02x", writearr[i]);
}
mode = ((7 + readcnt) << 4) | (writearr[1] & 0x0f);
}
msg_pspew(" cmd=%02x mode=%02x\n", writearr[0], mode);
if (!mode) {
msg_perr("%s: unsupported command type wr=%d rd=%d\n",
__func__, writecnt, readcnt);
/* Command type refers to the number of bytes read/written. */
return SPI_INVALID_LENGTH;
}
OUTB(writearr[0], data->spibase);
OUTB(mode, data->spibase + 1);
programmer_delay(10);
if (!readcnt)
return 0;
msg_pspew("%s: returning data =", __func__);
for (i = 0; i < readcnt; i++) {
readarr[i] = INB(data->spibase + 4 + i);
msg_pspew(" 0x%02x", readarr[i]);
}
msg_pspew("\n");
return 0;
}
static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf,
unsigned int start, unsigned int len)
{
mmio_readn((void *)(flash->virtual_memory + start), buf, len);
return 0;
}
static const struct spi_master spi_master_wbsio = {
.max_data_read = MAX_DATA_UNSPECIFIED,
.max_data_write = MAX_DATA_UNSPECIFIED,
.command = wbsio_spi_send_command,
.multicommand = default_spi_send_multicommand,
.read = wbsio_spi_read,
.write_256 = spi_chip_write_1,
.write_aai = spi_chip_write_1,
};
static int wbsio_spi_shutdown(void *data)
{
free(data);
return 0;
}
int wbsio_check_for_spi(void)
{
uint16_t wbsio_spibase = 0;
if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT1)))
if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT2)))
return 1;
msg_pspew("\nwbsio_spibase = 0x%x\n", wbsio_spibase);
msg_pdbg("%s: Winbond saved on 4 register bits so max chip size is "
"1024 kB!\n", __func__);
max_rom_decode.spi = 1024 * 1024;
struct wbsio_spi_data *data = calloc(1, sizeof(*data));
if (!data) {
msg_perr("Unable to allocate space for extra SPI master data.\n");
return SPI_GENERIC_ERROR;
}
data->spibase = wbsio_spibase;
register_shutdown(wbsio_spi_shutdown, data);
register_spi_master(&spi_master_wbsio, data);
return 0;
}
#endif /* defined(__i386__) || defined(__x86_64__) */