blob: 0bebe92adc5ac7baba8e14b989e29c89ec614fa6 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
#include "flash.h"
#define BIOS_ROM_ADDR 0x04
#define BIOS_ROM_DATA 0x08
#define INT_STATUS 0x0e
#define INTERNAL_CONFIG 0x00
#define SELECT_REG_WINDOW 0x800
#define PCI_VENDOR_ID_3COM 0x10b7
uint32_t internal_conf;
uint16_t id;
struct pcidev_status nics_3com[] = {
/* 3C90xB */
{0x10b7, 0x9055, PCI_OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
{0x10b7, 0x9001, PCI_NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
{0x10b7, 0x9004, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T (TPO)" },
{0x10b7, 0x9005, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" },
{0x10b7, 0x9006, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" },
{0x10b7, 0x900a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FL" },
{0x10b7, 0x905a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FX" },
{0x10b7, 0x9058, PCI_NT, "3COM", "3C905B: Cyclone 10/100/BNC" },
/* 3C905C */
{0x10b7, 0x9200, PCI_OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },
/* 3C980C */
{0x10b7, 0x9805, PCI_NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },
{},
};
int nic3com_init(void)
{
get_io_perms();
io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, nics_3com);
id = pcidev_dev->device_id;
/* 3COM 3C90xB cards need a special fixup. */
if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
|| id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
/* Select register window 3 and save the receiver status. */
OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
internal_conf = INL(io_base_addr + INTERNAL_CONFIG);
/* Set receiver type to MII for full BIOS ROM access. */
OUTL((internal_conf & 0xf00fffff) | 0x00600000, io_base_addr);
}
/*
* The lowest 16 bytes of the I/O mapped register space of (most) 3COM
* cards form a 'register window' into one of multiple (usually 8)
* register banks. For 3C90xB/3C90xC we need register window/bank 0.
*/
OUTW(SELECT_REG_WINDOW + 0, io_base_addr + INT_STATUS);
buses_supported = CHIP_BUSTYPE_PARALLEL;
return 0;
}
int nic3com_shutdown(void)
{
/* 3COM 3C90xB cards need a special fixup. */
if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
|| id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
/* Select register window 3 and restore the receiver status. */
OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
OUTL(internal_conf, io_base_addr + INTERNAL_CONFIG);
}
free(pcidev_bdf);
pci_cleanup(pacc);
#if defined(__FreeBSD__) || defined(__DragonFly__)
close(io_fd);
#endif
return 0;
}
void nic3com_chip_writeb(uint8_t val, chipaddr addr)
{
OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR);
OUTB(val, io_base_addr + BIOS_ROM_DATA);
}
uint8_t nic3com_chip_readb(const chipaddr addr)
{
OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR);
return INB(io_base_addr + BIOS_ROM_DATA);
}