blob: 14108f0f4c6ad4178c4f53b39e3b5db4d7d62d4e [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#if defined(__i386__) || defined(__x86_64__)
#include <stdlib.h>
#include "flash.h"
#include "programmer.h"
#include "hwaccess.h"
#define BIOS_ROM_ADDR 0x04
#define BIOS_ROM_DATA 0x08
#define INT_STATUS 0x0e
#define INTERNAL_CONFIG 0x00
#define SELECT_REG_WINDOW 0x800
#define PCI_VENDOR_ID_3COM 0x10b7
struct nic3com_data {
uint32_t io_base_addr;
uint32_t internal_conf;
uint16_t id;
};
static const struct dev_entry nics_3com[] = {
/* 3C90xB */
{0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
{0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
{0x10b7, 0x9004, OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" },
{0x10b7, 0x9005, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" },
{0x10b7, 0x9006, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" },
{0x10b7, 0x900a, NT, "3COM", "3C90xB: PCI 10BASE-FL" },
{0x10b7, 0x905a, NT, "3COM", "3C90xB: PCI 10BASE-FX" },
{0x10b7, 0x9058, OK, "3COM", "3C905B: Cyclone 10/100/BNC" },
/* 3C905C */
{0x10b7, 0x9200, OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },
/* 3C980C */
{0x10b7, 0x9805, NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },
{0},
};
static void nic3com_chip_writeb(const struct flashctx *flash, uint8_t val,
chipaddr addr)
{
struct nic3com_data *data = flash->mst->par.data;
OUTL((uint32_t)addr, data->io_base_addr + BIOS_ROM_ADDR);
OUTB(val, data->io_base_addr + BIOS_ROM_DATA);
}
static uint8_t nic3com_chip_readb(const struct flashctx *flash,
const chipaddr addr)
{
struct nic3com_data *data = flash->mst->par.data;
OUTL((uint32_t)addr, data->io_base_addr + BIOS_ROM_ADDR);
return INB(data->io_base_addr + BIOS_ROM_DATA);
}
static const struct par_master par_master_nic3com = {
.chip_readb = nic3com_chip_readb,
.chip_readw = fallback_chip_readw,
.chip_readl = fallback_chip_readl,
.chip_readn = fallback_chip_readn,
.chip_writeb = nic3com_chip_writeb,
.chip_writew = fallback_chip_writew,
.chip_writel = fallback_chip_writel,
.chip_writen = fallback_chip_writen,
};
static int nic3com_shutdown(void *par_data)
{
struct nic3com_data *data = par_data;
const uint16_t id = data->id;
/* 3COM 3C90xB cards need a special fixup. */
if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
|| id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
/* Select register window 3 and restore the receiver status. */
OUTW(SELECT_REG_WINDOW + 3, data->io_base_addr + INT_STATUS);
OUTL(data->internal_conf, data->io_base_addr + INTERNAL_CONFIG);
}
free(data);
return 0;
}
static int nic3com_init(void)
{
struct pci_dev *dev = NULL;
uint32_t io_base_addr = 0;
uint32_t internal_conf = 0;
uint16_t id;
if (rget_io_perms())
return 1;
dev = pcidev_init(nics_3com, PCI_BASE_ADDRESS_0);
if (!dev)
return 1;
io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0);
if (!io_base_addr)
return 1;
id = dev->device_id;
/* 3COM 3C90xB cards need a special fixup. */
if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
|| id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
/* Select register window 3 and save the receiver status. */
OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
internal_conf = INL(io_base_addr + INTERNAL_CONFIG);
/* Set receiver type to MII for full BIOS ROM access. */
OUTL((internal_conf & 0xf00fffff) | 0x00600000, io_base_addr);
}
/*
* The lowest 16 bytes of the I/O mapped register space of (most) 3COM
* cards form a 'register window' into one of multiple (usually 8)
* register banks. For 3C90xB/3C90xC we need register window/bank 0.
*/
OUTW(SELECT_REG_WINDOW + 0, io_base_addr + INT_STATUS);
struct nic3com_data *data = calloc(1, sizeof(*data));
if (!data) {
msg_perr("Unable to allocate space for PAR master data\n");
goto init_err_cleanup_exit;
}
data->io_base_addr = io_base_addr;
data->internal_conf = internal_conf;
data->id = id;
max_rom_decode.parallel = 128 * 1024;
if (register_shutdown(nic3com_shutdown, data)) {
free(data);
goto init_err_cleanup_exit;
}
register_par_master(&par_master_nic3com, BUS_PARALLEL, data);
return 0;
init_err_cleanup_exit:
/* 3COM 3C90xB cards need a special fixup. */
if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005
|| id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) {
/* Select register window 3 and restore the receiver status. */
OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS);
OUTL(internal_conf, io_base_addr + INTERNAL_CONFIG);
}
return 1;
}
const struct programmer_entry programmer_nic3com = {
.name = "nic3com",
.type = PCI,
.devs.dev = nics_3com,
.init = nic3com_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
.delay = internal_delay,
};
#else
#error PCI port I/O access is not supported on this architecture yet.
#endif