Gitiles
Code Review
Sign In
review.coreboot.org
/
coreboot
/
b7e692e0162d51c10c55591822ff8a7053f70056
/
src
/
mainboard
/
wyse
8e1f908
AMD geode: Avoid conflicting main() declaration
by Kyösti Mälkki
· 7 years ago
f4df9d1
mainboard/*/*/irq_tables.c: Use tabs for indents
by Elyes HAOUAS
· 8 years ago
d23ee5d
mainboard: Clean up boot_option/reboot_bits in cmos.layout
by Nico Huber
· 8 years ago
5276941
AMD boards: Fix romstage main() declaration
by Kyösti Mälkki
· 8 years ago
8a3ff6a
mainboard: Remove empty mainboard.c files
by Paul Menzel
· 9 years ago
2439132
mainboard: Remove last_boot NVRAM option
by Timothy Pearson
· 9 years ago
a73b931
tree: drop last paragraph of GPL copyright header
by Patrick Georgi
· 9 years ago
5264862
Remove empty lines at end of file
by Elyes HAOUAS
· 9 years ago
b890a12
Remove address from GPLv2 headers
by Patrick Georgi
· 9 years ago
139e106
kconfig: automatically include mainboards
by Stefan Reinauer
· 9 years ago
94efd19
mainboard/cmos: Kill off unused boot_* parameters
by Timothy Pearson
· 10 years ago
c0ae684
mainboard/cmos: Move ECC variables out of fallback mechanism byte
by Timothy Pearson
· 10 years ago
9b68f05
mainboard/cmos: Delete obsolete commented parameters
by Timothy Pearson
· 10 years ago
069f476
mainboard: Drop print_ implementation from non-romcc boards
by Stefan Reinauer
· 10 years ago
77757c2
mainboard/*/romstage.c: Sanitize system header inclusions
by Edward O'Callaghan
· 10 years ago
546953c
Replace hlt with halt()
by Patrick Georgi
· 10 years ago
a0a3727
intel/cpu: rename car.h to romstage.h
by Aaron Durbin
· 10 years ago
1ab2027
Intel: Add common header file for CAR setup
by Edward O'Callaghan
· 10 years ago
cb70f79
mainboard: Trivial - drop trailing blank lines at EOF
by Edward O'Callaghan
· 10 years ago
7974471
mainboard: Trivial - drop trailing blank lines at EOF
by Edward O'Callaghan
· 10 years ago
fd33781
Move ARCH_* from board/Kconfig to cpu or soc Kconfig.
by Furquan Shaikh
· 10 years ago
4333071
board-status: Add board_info.txt extracted from wiki.
by Vladimir Serbinenko
· 11 years ago
a46a712
GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«
by Paul Menzel
· 12 years ago
528640d
mainboard.c: Name enable_dev function uniformly `mainboard_enable`
by Paul Menzel
· 12 years ago
0aa37c4
sconfig: rename lapic_cluster -> cpu_cluster
by Stefan Reinauer
· 12 years ago
4aff445
sconfig: rename pci_domain -> domain
by Stefan Reinauer
· 12 years ago
a47bd91
Fix PIRQ routing abstraction
by Stefan Reinauer
· 12 years ago
a93c3fe
Drop redundant CHIP_NAME in mainboard.c
by Kyösti Mälkki
· 12 years ago
188e3c2
Drop mainboard chip.h
by Stefan Reinauer
· 12 years ago
472efa6
Remove whitespace.
by Patrick Georgi
· 13 years ago
7916f4c
AMD Geode cpus: apply un-written naming rules
by Kyösti Mälkki
· 13 years ago
d0ac789
Update geode GX2 tree to match LX.
by Nils Jacobs
· 13 years ago
5ff7c13
remove trailing whitespace
by Stefan Reinauer
· 13 years ago
42fa7fe
run uart_init() from console_init, just like the other console initialization functions.
by Stefan Reinauer
· 13 years ago
5005bb06
Unify use of post_code
by Alexandru Gagniuc
· 13 years ago
9132102
Use subsystem id from devicetree.cb instead of Kconfig and move
by Sven Schnelle
· 14 years ago
84be0f5
-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)
by Nils Jacobs
· 14 years ago
836ae29
first round name simplification. drop the <component>_ prefix.
by stepan
· 14 years ago
0d5a6ac
Drop per-board ram_check() calls for now.
by Uwe Hermann
· 14 years ago
7b99705
Simplify a few code chunks, fix whitespace and indentation.
by Uwe Hermann
· 14 years ago
57b2ff8
Drop excessive whitespace randomly sprinkled in romstage.c files.
by Uwe Hermann
· 14 years ago
6dc92f0
Use DIMM0 et al in lots more places instead of hardocding values.
by Uwe Hermann
· 14 years ago
9bd9a90
Unify DIMM SPD addressing. For Geode, change the
by Patrick Georgi
· 14 years ago
eca3280
Add Kconfig CPU speed selection to Geode GX2 boards.
by Nils Jacobs
· 14 years ago
f29b3b6
GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value.
by Nils Jacobs
· 14 years ago
76890dd
Change Geode GX2 to use the auto DRAM detect code from Geode LX.
by Nils Jacobs
· 14 years ago
51eafde
Enable or disable the power button in Kconfig
by Peter Stuge
· 14 years ago
d083595
Remove lib/ramtest.c-include from all CAR boards.
by Patrick Georgi
· 14 years ago
768d8ea
Move CAR config from mainboard to CPU config for AMD GX2 boards.
by Warren Turkal
· 14 years ago
c679ab5
RAMBASE = 0x4000 is no longer needed. Drop it.
by Stefan Reinauer
· 14 years ago
704b596
We call this cache as ram everywhere, so let's call it the same in Kconfig
by Stefan Reinauer
· 14 years ago
9a684fc
Restructured all vendors' Kconfig files to no longer source the boards'
by Jens Rottmann
· 14 years ago
78265d5
Remove unused mainboard_config definitions. Trivial.
by Myles Watson
· 14 years ago
8c4f31b
Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /
by Stefan Reinauer
· 14 years ago
bba0d76
Let Geode GX2 use geode_post_code.h just like Geode LX
by Nils Jacobs
· 14 years ago
e474070
This patch converts the Geode GX2 boards to CAR.
by Nils Jacobs
· 14 years ago
eb50c7d
Re-integrate "USE_OPTION_TABLE" code.
by Edwin Beasant
· 14 years ago
2305f74
Move CS5535 specific setup from GX2 driver to CS5535.
by Stefan Reinauer
· 14 years ago
1e211327
This patch cleanes up the Wyse S50 port and unifies the memmory regions
by Nils Jacobs
· 14 years ago
bf9e538
Remove pc80/serial.c includes in ROMCC boards and include
by Patrick Georgi
· 14 years ago
d37ce2e
Add the Wyse S50 thin client to Coreboot.
by Nils Jacobs
· 14 years ago