- 707097f fix interrupt for f5 (ehci) by Ronald G. Minnich · 18 years ago
- aad235e changes per steve goodrich. by Ronald G. Minnich · 18 years ago
- 0a683fa create valid xmlfiles that pass xmllint by Stefan Reinauer · 18 years ago
- 6472a0e add support for PMC 49FL002 as used in the RD1-PMC2 by Stefan Reinauer · 18 years ago
- 92e8b80 fix typo on duplicate line. by Ronald G. Minnich · 18 years ago
- 5560a34 fix compilation of s2892. by Stefan Reinauer · 18 years ago
- 53a00b7 match settings per steve goodrich. by Ronald G. Minnich · 18 years ago
- 88fb1a6 set up interrupt values for the southbridge, and add a function to by Ronald G. Minnich · 18 years ago
- 9d0b30d Fixes from AMD. Tested to build on rumba and olpc, and builds. by Ronald G. Minnich · 18 years ago
- 1f96360 delete two empty files by Stefan Reinauer · 18 years ago
- 3951027 * delete two empty files * commit SMM lock code. by Stefan Reinauer · 18 years ago
- 2d7bb59 fix idiiot typo I did not catch. by Ronald G. Minnich · 18 years ago
- 48415d5 add irq mapper support for OLPC and other boards that need this mapping by Ronald G. Minnich · 18 years ago
- 6ab0fa9 add k8 processor name handling as required by the k8 revision guide. by Stefan Reinauer · 18 years ago
- f560285 new flash part by Stefan Reinauer · 18 years ago
- fd14d44 remove erroneous cache disable. by Ronald G. Minnich · 18 years ago
- 73c92a4 ron forget an svn add. by Ronald G. Minnich · 18 years ago
- 90dc0db Get rid of #if 01 and debug prints that are compiled out. by Ronald G. Minnich · 18 years ago
- 878a669 add a 1M target for big roms by Ronald G. Minnich · 18 years ago
- fb93749 changes from AMD for making OLPC video work. by Ronald G. Minnich · 18 years ago
- 890ee09 further development of OLPC. Set vsm size to 35k. add PCI IRQ for USB. by Ronald G. Minnich · 18 years ago
- 192b7bc add full xml logging to abuild to work on the complete information by Stefan Reinauer · 18 years ago
- 2d1fe37 fix two mainboards that have been broken by someone who does not use abuild.sh by Stefan Reinauer · 18 years ago
- b5fcfdb add DK8HTX support. by Ronald G. Minnich · 18 years ago
- d0cffad fix broadcom/blast, tyan/s2735, tyan/s2891, tyan/s2895 broken by r2307 by Stefan Reinauer · 18 years ago
- 9dd8d56 co processor support with s2891 by Yinghai Lu · 18 years ago
- 9a8e36d init the ECC for BSP and AP at the same time. So reduce init cpus time by Yinghai Lu · 18 years ago
- 2b396cd add option to decide to use onboard vga or addon card. by Yinghai Lu · 18 years ago
- bad9d10 cleanup some of the compressed rom stream ugliness -- more to do! by Ronald G. Minnich · 18 years ago
- 5d573c2 Commit for IDE NAND FLASH by Ronald G. Minnich · 18 years ago
- 98e904e OLPC now builds and works just fine. by Ronald G. Minnich · 18 years ago
- b9a335c correct it, finally. by Ronald G. Minnich · 18 years ago
- 6084160 memory size in cf07 goodrich pll code disable havedmi by Ronald G. Minnich · 18 years ago
- 437f28e Fix an error in the config files. by Ronald G. Minnich · 18 years ago
- 49a89f1 Use a real variable to configure rom base for vsa ... by Ronald G. Minnich · 18 years ago
- ad97691c For a kernel-only OLPC. by Ronald G. Minnich · 18 years ago
- 694d20e This is to enable COM1 early. by Ronald G. Minnich · 18 years ago
- 1656c18 reorder early startup so that it might work. by Ronald G. Minnich · 18 years ago
- 070a10f mods for early printing on OLPC by Ronald G. Minnich · 18 years ago
- ab4f5d0 fix the tree by Stefan Reinauer · 18 years ago
- 7ac38a3 don't wait core0 started twice by Yinghai Lu · 18 years ago
- 52377de core range and set_init_ram_access by Yinghai Lu · 18 years ago
- b73fd56 rm unused file by Yinghai Lu · 18 years ago
- 608d4b2 merge zrom to rom_stream and print olen ilen by Yinghai Lu · 18 years ago
- 4c47532 oops! Slap me on the head for this one. Quick fix for ward until by Stefan Reinauer · 18 years ago
- c01fe5d more changes; rumba enet works fine now. by Ronald G. Minnich · 18 years ago
- dc7b71c enable compressed payload per default by Stefan Reinauer · 18 years ago
- ead7368 add automatic payload compression method to LinuxBIOS by Stefan Reinauer · 18 years ago
- d3ba4aa Fall back to pre-broken settings and setup for GX2. by Ronald G. Minnich · 18 years ago
- ae3cbe9 typo by Stefan Reinauer · 18 years ago
- 64f07fb by Li-Ta Lo · 18 years ago
- c1a4b2b by Li-Ta Lo · 18 years ago
- b947b14 more code removal and removal of incorrect register settings. by Ronald G. Minnich · 18 years ago
- 94571a4 removing redundant and unneeded calls to functions. by Ronald G. Minnich · 18 years ago
- 3716427 we don't need msr_init by Ronald G. Minnich · 18 years ago
- b7a09b4 some todo and comment for ron. by Li-Ta Lo · 18 years ago
- ae11b37 no fallback version by Ronald G. Minnich · 18 years ago
- 417d8c4 set irq options. by Ronald G. Minnich · 18 years ago
- cf120d1 builds and should do the right things for sb for interrupt routing. by Ronald G. Minnich · 18 years ago
- 1c2f49e to give ollie a look. by Ronald G. Minnich · 18 years ago
- 5ee2bbb9 fix the msr.lo for olpc 0x20000019 by Ronald G. Minnich · 18 years ago
- 6c20eb4 hex values with 0x prefix by Stefan Reinauer · 18 years ago
- 2a7352c Adds a CONFIG_MAX_PCI_BUSES to pci_locate_device() Default is 255. by Richard Smith · 18 years ago
- 2f19800 fix so that olpc uarts come up enabled. by Ronald G. Minnich · 18 years ago
- ff8c08e Adds support for understanding bus:dev.func to the -d option of testbios by Richard Smith · 18 years ago
- 496450c Lower debug progress messages in vt8623 init to debug level rather than error. by Jonathan McDowell · 18 years ago
- a910a3a more 5536 -> 5536 conversion by Li-Ta Lo · 18 years ago
- bbdaeaf change to 5536 by Li-Ta Lo · 18 years ago
- 32c315b change to 5536 by Li-Ta Lo · 18 years ago
- b8f4f88 remove dup files by Li-Ta Lo · 18 years ago
- 5d69896 add cs5536 by Li-Ta Lo · 18 years ago
- 05c0869 boot to kernel by Li-Ta Lo · 18 years ago
- 37784b4 added cs5536 by Li-Ta Lo · 18 years ago
- bc5a821 add cs5536 directory by Li-Ta Lo · 18 years ago
- 5c97d78 add cs5536 directory by Li-Ta Lo · 18 years ago
- 965b5ad resolve conflict by Li-Ta Lo · 18 years ago
- 36c00aa fix adjustment for sizeram by Ronald G. Minnich · 18 years ago
- 61083da add back in missing line by Ronald G. Minnich · 18 years ago
- 55e10fe set up timing by Ronald G. Minnich · 18 years ago
- 170ce33 add ram resources by Ronald G. Minnich · 18 years ago
- df46cb2 added the olpc target and support by Ronald G. Minnich · 18 years ago
- ea9db56 add SystemPreInit() and support by Ronald G. Minnich · 18 years ago
- d8d8fff minor modification by Li-Ta Lo · 18 years ago
- cf648c9 this was in my queue since 2005/10/26 by Stefan Reinauer · 18 years ago
- fbce0ff small fixes to get Ward Vandewege's Tyan board booting. by Stefan Reinauer · 18 years ago
- 4b8cf1d added chipsetinit function, many defines. addec call to chipsetinit to by Ronald G. Minnich · 18 years ago
- 45f6c5e add cpureginit to romcc code. by Ronald G. Minnich · 18 years ago
- 526b2c4 clean up gx2def.h a bit. by Ronald G. Minnich · 18 years ago
- 5346533 drop unsupported momentum apache board. Check by Stefan Reinauer · 18 years ago
- 2a9fcb7 15->11 for device num by Yinghai Lu · 18 years ago
- 4223188 add support for GLIUInit() by Ronald G. Minnich · 18 years ago
- 40fedaf add northbridgeinit, also add new constants. by Ronald G. Minnich · 18 years ago
- 29e2726 pseudo fix xe7501devkit by Stefan Reinauer · 18 years ago
- f01f154 fix constants style by Ronald G. Minnich · 18 years ago
- 84e4bf6 interesting behavior, i thought svn could do moves. by Stefan Reinauer · 18 years ago
- 966d0e6 break the tree really quick due to svn restrictions, next commit fill fix it by Stefan Reinauer · 18 years ago
- 44f72eb add bug support for 2.1 by Ronald G. Minnich · 18 years ago
- 6908540 reformat by Li-Ta Lo · 18 years ago
- 5917c62 by Li-Ta Lo · 18 years ago
- 8854d30 by Li-Ta Lo · 18 years ago