blob: 7ed229e81accd96581b21e4f609d4fbaab5f0aa2 [file] [log] [blame]
Patrick Georgi71b84802011-02-22 14:35:05 +00001##
2## This file is part of the coreboot project.
3##
4## Copyright (C) 2011 secunet Security Networks AG
5##
6## This program is free software; you can redistribute it and/or modify
7## it under the terms of the GNU General Public License as published by
8## the Free Software Foundation; version 2 of the License.
9##
10## This program is distributed in the hope that it will be useful,
11## but WITHOUT ANY WARRANTY; without even the implied warranty of
12## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13## GNU General Public License for more details.
14##
Patrick Georgi71b84802011-02-22 14:35:05 +000015
Ben Gardner48c232c2016-01-20 10:17:38 -060016GIT:=$(shell [ -e "$(top)/.git" ] && command -v git)
Patrick Georgic0e394b2015-03-04 15:02:03 +010017
Patrick Georgi71b84802011-02-22 14:35:05 +000018#######################################################################
Patrick Georgi6dc85702015-11-30 22:44:53 +010019# normalize Kconfig variables in a central place
20CONFIG_CBFS_PREFIX:=$(call strip_quotes,$(CONFIG_CBFS_PREFIX))
Patrick Georgi8a3592e2015-09-16 18:10:52 +020021CONFIG_FMDFILE:=$(call strip_quotes,$(CONFIG_FMDFILE))
Patrick Georgi6dc85702015-11-30 22:44:53 +010022
23#######################################################################
Patrick Georgi71b84802011-02-22 14:35:05 +000024# misleadingly named, this is the coreboot version
Patrick Georgic0e394b2015-03-04 15:02:03 +010025export KERNELVERSION := $(strip $(if $(GIT),\
26 $(shell git describe --dirty --always || git describe),\
Patrick Georgi492a0752015-07-13 20:43:28 +020027 $(if $(wildcard $(top)/.coreboot-version),\
28 $(shell cat $(top)/.coreboot-version),\
29 coreboot-unknown$(KERNELREVISION))))
Patrick Georgi71b84802011-02-22 14:35:05 +000030
31#######################################################################
32# Basic component discovery
Patrick Georgi71b84802011-02-22 14:35:05 +000033MAINBOARDDIR=$(call strip_quotes,$(CONFIG_MAINBOARD_DIR))
34export MAINBOARDDIR
35
Kyösti Mälkki0db2ae3a2012-04-19 12:00:06 +030036## Final build results, which CBFSTOOL uses to create the final
37## rom image file, are placed under $(objcbfs).
38## These typically have suffixes .debug .elf .bin and .map
Patrick Georgi6dc85702015-11-30 22:44:53 +010039export objcbfs := $(obj)/cbfs/$(CONFIG_CBFS_PREFIX)
Kyösti Mälkki0db2ae3a2012-04-19 12:00:06 +030040
41## Based on the active configuration, Makefile conditionally collects
42## the required assembly includes and saves them in a file.
43## Such files that do not have a clear one-to-one relation to a source
44## file under src/ are placed and built under $(objgenerated)
45export objgenerated := $(obj)/generated
46
Patrick Georgi71b84802011-02-22 14:35:05 +000047#######################################################################
48# root rule to resolve if in build mode (ie. configuration exists)
Patrick Georgi45057872016-02-02 17:38:45 +010049real-target: $(obj)/config.h coreboot files_added
Patrick Georgi533c1192014-07-10 09:42:03 +020050coreboot: build-dirs $(obj)/coreboot.rom $(obj)/cbfstool $(obj)/rmodtool
Patrick Georgi71b84802011-02-22 14:35:05 +000051
Martin Rothb09a5692016-01-24 19:38:33 -070052# This target can be used in site local to run scripts or additional
53# targets after the build completes by creating a Makefile.inc in the
54# site-local directory with a target named 'build_complete::'
55build_complete:: coreboot
56 printf "\nBuilt %s (%s)\n" $(CONFIG_MAINBOARD_DIR) \
57 $(CONFIG_MAINBOARD_PART_NUMBER)
58
Patrick Georgi45057872016-02-02 17:38:45 +010059# This target can be used to run rules after all files were added to CBFS,
60# for example to process FMAP regions or the entire image.
61files_added:: build_complete
62
Patrick Georgi71b84802011-02-22 14:35:05 +000063#######################################################################
64# our phony targets
Martin Rothb09a5692016-01-24 19:38:33 -070065PHONY+= clean-abuild coreboot lint lint-stable build-dirs build_complete
Patrick Georgi71b84802011-02-22 14:35:05 +000066
67#######################################################################
68# root source directories of coreboot
Aaron Durbindc9f5cd2015-09-08 13:34:43 -050069subdirs-y := src/lib src/commonlib/ src/console src/device src/acpi
Stefan Reinauer77c04e92015-04-27 14:03:47 -070070subdirs-y += src/ec/acpi $(wildcard src/ec/*/*) $(wildcard src/southbridge/*/*)
Stefan Reinauere1133b72015-04-27 14:04:38 -070071subdirs-y += $(wildcard src/soc/*/*) $(wildcard src/northbridge/*/*)
Stefan Reinauer1d7b9de2015-04-19 12:48:25 -070072subdirs-y += src/superio $(wildcard src/drivers/*) src/cpu src/vendorcode
Daisuke Nojirie1741c52015-02-09 18:15:17 -080073subdirs-y += util/cbfstool util/sconfig util/nvramtool util/broadcom
Ruilin Haoc52d4f52015-12-10 00:36:10 -080074subdirs-y += util/futility util/marvell
Stefan Reinauer13e41822015-04-27 14:02:36 -070075subdirs-y += $(wildcard src/arch/*)
Patrick Georgi71b84802011-02-22 14:35:05 +000076subdirs-y += src/mainboard/$(MAINBOARDDIR)
Martin Roth4351ace2016-02-16 19:40:47 -070077subdirs-y += payloads payloads/external
Patrick Georgi71b84802011-02-22 14:35:05 +000078
Patrick Georgia25828d2011-09-02 09:57:01 +020079subdirs-y += site-local
80
Patrick Georgi71b84802011-02-22 14:35:05 +000081#######################################################################
82# Add source classes and their build options
Aaron Durbin8c8e2b72015-10-14 10:08:10 -050083classes-y := ramstage romstage bootblock smm smmstub cpu_microcode libverstage verstage
Furquan Shaikh133096b2014-07-31 09:28:55 -070084
85# Add dynamic classes for rmodules
86$(foreach supported_arch,$(ARCH_SUPPORTED), \
87 $(eval $(call define_class,rmodules_$(supported_arch),$(supported_arch))))
Aaron Durbindde76292015-09-05 12:59:26 -050088# Provide a macro to determine environment for free standing rmodules.
89$(foreach supported_arch,$(ARCH_SUPPORTED), \
90 $(eval rmodules_$(supported_arch)-generic-ccopts += -D__RMODULE__))
Patrick Georgi71b84802011-02-22 14:35:05 +000091
Patrick Georgif33e3952012-11-25 17:10:47 +010092#######################################################################
Martin Roth47abc542015-07-03 12:54:14 -060093# Helper functions for math and various file placement matters.
94# macros work on all formats understood by printf(1)
95# values are space separated if using more than one value
Patrick Georgi3eefeea2014-11-12 19:11:50 +010096#
Martin Roth47abc542015-07-03 12:54:14 -060097# int-add: adds an arbitrary length list of integers
98# int-subtract: subtracts the the second of two integers from the first
99# int-multiply: multiplies an arbitrary length list of integers
100# int-divide: divides the first integer by the second
101# int-remainder: arithmetic remainder of the first number divided by the second
102# int-lt: 1 if the first value is less than the second. 0 otherwise
103# int-gt: 1 if the first values is greater than the second. 0 otherwise
104# int-eq: 1 if the two values are equal. 0 otherwise
105# int-align: align $1 to $2 units
106# file-size: returns the filesize of the given file
Patrick Georgi3eefeea2014-11-12 19:11:50 +0100107_toint=$(shell printf "%d" $1)
108_int-add2=$(shell expr $(call _toint,$1) + $(call _toint,$2))
109int-add=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-add,$(call _int-add2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
Martin Roth47abc542015-07-03 12:54:14 -0600110int-subtract=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) - $(call _toint,$(word 2,$1))))
111_int-multiply2=$(shell expr $(call _toint,$1) \* $(call _toint,$2))
112int-multiply=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-multiply,$(call _int-multiply2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
113int-divide=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) / $(call _toint,$(word 2,$1))))
114int-remainder=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) % $(call _toint,$(word 2,$1))))
115int-lt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \< $(call _toint,$(word 2,$1))))
116int-gt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \> $(call _toint,$(word 2,$1))))
117int-eq=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) = $(call _toint,$(word 2,$1))))
Patrick Georgia234f452014-12-03 11:20:51 +0100118int-align=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A + \( \( $$B - \( $$A % $$B \) \) % $$B \) )
Patrick Georgi3eefeea2014-11-12 19:11:50 +0100119file-size=$(shell cat $1 | wc -c)
120
121#######################################################################
Patrick Georgif33e3952012-11-25 17:10:47 +0100122# Helper functions for ramstage postprocess
123spc :=
124spc +=
125$(spc) :=
126$(spc) +=
Patrick Georgic8d4abd2016-01-20 15:54:31 +0100127comma := ,
Patrick Georgif33e3952012-11-25 17:10:47 +0100128
129# files-in-dir-recursive,dir,files
130files-in-dir-recursive=$(filter $(1)%,$(2))
131
132# parent-dir,dir/
Patrick Georgi1f946702014-05-21 22:36:13 +0200133parent-dir=$(dir $(if $(patsubst /%,,$(1)),,/)$(subst $( ),/,$(strip $(subst /, ,$(1)))))
Patrick Georgif33e3952012-11-25 17:10:47 +0100134
135# filters out exactly the directory specified
136# filter-out-dir,dir_to_keep,dirs
137filter-out-dir=$(filter-out $(1),$(2))
138
139# filters out dir_to_keep and all its parents
140# filter-out-dirs,dir_to_keep,dirs
Patrick Georgi1f946702014-05-21 22:36:13 +0200141filter-out-dirs=$(if $(filter-out ./ /,$(1)),$(call filter-out-dirs,$(call parent-dir,$(1)),$(call filter-out-dir,$(1),$(2))),$(call filter-out-dir,$(1),$(2)))
Patrick Georgif33e3952012-11-25 17:10:47 +0100142
143# dir-wildcards,dirs
144dir-wildcards=$(addsuffix %,$(1))
145
146# files-in-dir,dir,files
Patrick Georgi1f946702014-05-21 22:36:13 +0200147files-in-dir=$(filter-out $(call dir-wildcards,$(call filter-out-dirs,$(1),$(sort $(dir $(2))))),$(call files-in-dir-recursive,$(1),$(2)))
Patrick Georgif33e3952012-11-25 17:10:47 +0100148
149#######################################################################
150# reduce command line length by linking the objects of each
151# directory into an intermediate file
Julius Wernerf97b88b2014-12-05 12:32:09 -0800152ramstage-postprocess=$$(eval DEPENDENCIES+=$$(addsuffix .d,$$(basename $(1)))) \
153 $(foreach d,$(sort $(dir $(filter-out %.ld,$(1)))), \
Patrick Georgieec8dfb2015-05-07 22:24:41 +0200154 $(eval $(d)ramstage.a: $(call files-in-dir,$(d),$(filter-out %.ld,$(1))); rm -f $$@ && $(AR_ramstage) rcsT $$@ $$^ ) \
155 $(eval ramstage-objs:=$(d)ramstage.a $(filter-out $(filter-out %.ld, $(call files-in-dir,$(d),$(1))),$(ramstage-objs))))
Patrick Georgif33e3952012-11-25 17:10:47 +0100156
Julius Werner015f0ae2014-09-15 22:10:33 -0700157bootblock-generic-ccopts += -D__PRE_RAM__ -D__BOOTBLOCK__
158romstage-generic-ccopts += -D__PRE_RAM__ -D__ROMSTAGE__
159ramstage-generic-ccopts += -D__RAMSTAGE__
Rudolf Marek7f0e9302011-09-02 23:23:41 +0200160ifeq ($(CONFIG_TRACE),y)
Julius Werner015f0ae2014-09-15 22:10:33 -0700161ramstage-c-ccopts += -finstrument-functions
Rudolf Marek7f0e9302011-09-02 23:23:41 +0200162endif
Stefan Reinauerd37ab452012-12-18 16:23:28 -0800163ifeq ($(CONFIG_COVERAGE),y)
Julius Werner015f0ae2014-09-15 22:10:33 -0700164ramstage-c-ccopts += -fprofile-arcs -ftest-coverage
Stefan Reinauerd37ab452012-12-18 16:23:28 -0800165endif
Rudolf Marek7f0e9302011-09-02 23:23:41 +0200166
Martin Roth90105d52015-02-12 19:34:11 -0700167# try to fetch non-optional submodules if the source is under git
Patrick Georgic0e394b2015-03-04 15:02:03 +0100168forgetthis:=$(if $(GIT),$(shell git submodule update --init))
Patrick Georgi7e9b9d82012-04-30 21:06:10 +0200169ifeq ($(CONFIG_USE_BLOBS),y)
Patrick Georgi26e24cc2015-05-05 22:27:25 +0200170# this is necessary because 3rdparty/blobs is update=none, and so is ignored
Patrick Georgi88883162014-10-29 15:50:32 +0100171# unless explicitly requested and enabled through --checkout
Patrick Georgi26e24cc2015-05-05 22:27:25 +0200172forgetthis:=$(if $(GIT),$(shell git submodule update --init --checkout 3rdparty/blobs))
Patrick Georgi7e9b9d82012-04-30 21:06:10 +0200173endif
174
Patrick Georgi57205c72011-03-08 20:49:18 +0000175ramstage-c-deps:=$$(OPTION_TABLE_H)
176romstage-c-deps:=$$(OPTION_TABLE_H)
Patrick Georgi27ef6022015-04-30 14:25:14 +0200177libverstage-c-deps:=$$(OPTION_TABLE_H)
Stefan Reinauer77b16552015-01-14 19:51:47 +0100178verstage-c-deps:=$$(OPTION_TABLE_H)
Hung-Te Linfe187922013-02-01 01:09:24 +0800179bootblock-c-deps:=$$(OPTION_TABLE_H)
Patrick Georgi57205c72011-03-08 20:49:18 +0000180
Patrick Georgi990e7c92015-04-03 10:47:15 +0200181# Add handler to copy linker scripts
182define generic-objs_ld_template_gen
183de$(EMPTY)fine $(1)-objs_ld_template
Patrick Georgi828e0e82015-04-04 15:50:20 +0200184$$(call src-to-obj,$1,$$(1).ld): $$(1).ld $(obj)/config.h
Patrick Georgi990e7c92015-04-03 10:47:15 +0200185 @printf " CP $$$$(subst $$$$(obj)/,,$$$$(@))\n"
Julius Wernerc19f8762015-09-29 16:41:11 -0700186 $$(CC_$(1)) -MMD $$(CPPFLAGS_$(1)) $$($(1)-ld-ccopts) $(PREPROCESS_ONLY) -include $(obj)/config.h -MT $$$$@ -o $$$$@ $$$$<
Patrick Georgi990e7c92015-04-03 10:47:15 +0200187en$(EMPTY)def
188endef
189
Patrick Georgief345c22015-04-27 18:01:12 +0200190# Add handler to deal with archives
191define generic-objs_a_template_gen
192de$(EMPTY)fine $(1)-objs_a_template
193$$(call src-to-obj,$1,$$(1).a): $$(1).a
Nico Huber10b7cef2016-01-23 03:23:23 +0100194 @printf " AR $$$$(subst $$$$(obj)/,,$$$$(@))\n"
195 $$$$(AR_$(1)) rcsT $$$$@.tmp $$$$<
Patrick Georgief345c22015-04-27 18:01:12 +0200196 mv $$$$@.tmp $$$$@
197en$(EMPTY)def
198endef
199
Patrick Georgif4305462015-04-03 10:39:05 +0200200# Add handler to add no rules for manual files
201define generic-objs_manual_template_gen
202# do nothing
203endef
204
Patrick Georgi71b84802011-02-22 14:35:05 +0000205#######################################################################
206# Add handler to compile ACPI's ASL
Aaron Durbinab454c62015-07-30 12:44:58 -0500207# arg1: base file name
208# arg2: y or n for including in cbfs. defaults to y
Vladimir Serbinenko36f8d272015-05-31 12:31:59 +0200209define asl_template
Patrick Georgi6dc85702015-11-30 22:44:53 +0100210$(CONFIG_CBFS_PREFIX)/$(1).aml-file = $(obj)/$(1).aml
211$(CONFIG_CBFS_PREFIX)/$(1).aml-type = raw
212$(CONFIG_CBFS_PREFIX)/$(1).aml-compression = none
213cbfs-files-$(if $(2),$(2),y) += $(CONFIG_CBFS_PREFIX)/$(1).aml
Martin Roth92898b42015-12-09 13:05:00 -0700214-include $(obj)/$(1).d
Vladimir Serbinenko36f8d272015-05-31 12:31:59 +0200215$(obj)/$(1).aml: $(src)/mainboard/$(MAINBOARDDIR)/$(1).asl $(obj)/config.h
Patrick Georgi71b84802011-02-22 14:35:05 +0000216 @printf " IASL $$(subst $(top)/,,$$(@))\n"
Patrick Georgi26de1122015-04-07 17:40:42 +0200217 $(CC_ramstage) -x assembler-with-cpp -E -MMD -MT $$(@) $$(CPPFLAGS_ramstage) -D__ACPI__ -P -include $(src)/include/kconfig.h -I$(obj) -I$(src) -I$(src)/include -I$(src)/arch/$(ARCHDIR-$(ARCH-ramstage-y))/include -I$(src)/mainboard/$(MAINBOARDDIR) $$< -o $$@
Martin Roth77c67b32015-06-25 09:36:27 -0600218ifeq ($(CONFIG_IASL_WARNINGS_ARE_ERRORS),y)
219 cd $$(dir $$@); $(IASL) -we -p $$(notdir $$@) $$(notdir $$@)
220else
Vladimir Serbinenko36f8d272015-05-31 12:31:59 +0200221 cd $$(dir $$@); $(IASL) -p $$(notdir $$@) $$(notdir $$@)
Martin Roth77c67b32015-06-25 09:36:27 -0600222endif
Patrick Georgi71b84802011-02-22 14:35:05 +0000223endef
224
225#######################################################################
Patrick Georgi3bbd2bf2012-03-09 12:30:07 +0100226# Parse plaintext cmos defaults into binary format
227# arg1: source file
228# arg2: binary file name
229cbfs-files-processor-nvramtool= \
230 $(eval $(2): $(1) $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout | $(objutil)/nvramtool/nvramtool ; \
Patrick Georgi10420cc2015-11-25 19:17:42 +0100231 printf " CREATE $(2) (from $(1))\n"; \
232 $(objutil)/nvramtool/nvramtool -y $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout -D $(2).tmp -p $(1) && \
233 mv $(2).tmp $(2))
Patrick Georgi3bbd2bf2012-03-09 12:30:07 +0100234
235#######################################################################
Patrick Georgi843005c2012-04-30 23:15:17 +0200236# Link VSA binary to ELF-ish stage
237# arg1: source file
238# arg2: binary file name
239cbfs-files-processor-vsa= \
240 $(eval $(2): $(1) ; \
Patrick Georgi10420cc2015-11-25 19:17:42 +0100241 printf " CREATE $(2) (from $(1))\n"; \
242 $(OBJCOPY_ramstage) --set-start 0x20 --adjust-vma 0x60000 -I binary -O elf32-i386 -B i386 $(1) $(2).tmp && \
243 $(LD_ramstage) -m elf_i386 -e 0x60020 --section-start .data=0x60000 $(2).tmp -o $(2))
Patrick Georgi843005c2012-04-30 23:15:17 +0200244
245#######################################################################
Patrick Georgi551b3832015-11-25 18:47:56 +0100246# Reduce a .config file to its minimal representation
247# arg1: input
248# arg2: output
249cbfs-files-processor-defconfig= \
Patrick Georgia91402f2015-11-27 12:36:28 +0100250 $(eval $(2): $(1) $(obj)/build.h; \
Patrick Georgi551b3832015-11-25 18:47:56 +0100251 printf " CREATE $(2) (from $(1))\n"; \
Patrick Georgia91402f2015-11-27 12:36:28 +0100252 printf "\# This image was built using coreboot " > $(2).tmp && \
253 grep "\<COREBOOT_VERSION\>" $(obj)/build.h |cut -d\" -f2 >> $(2).tmp && \
254 $(MAKE) DOTCONFIG=$(1) DEFCONFIG=$(2).tmp2 savedefconfig && \
255 cat $(2).tmp2 >> $(2).tmp && \
256 rm -f $(2).tmp2 && \
Patrick Georgi551b3832015-11-25 18:47:56 +0100257 \mv -f $(2).tmp $(2))
258
259#######################################################################
Patrick Georgi71b84802011-02-22 14:35:05 +0000260# Add handler for arbitrary files in CBFS
261$(call add-special-class,cbfs-files)
262cbfs-files-handler= \
Patrick Georgi3bbd2bf2012-03-09 12:30:07 +0100263 $(eval tmp-cbfs-method:=$(word 2, $(subst :, ,$($(2)-file)))) \
Patrick Georgi1fc2bda2012-11-15 14:51:54 +0100264 $(eval $(2)-file:=$(call strip_quotes,$(word 1, $(subst :, ,$($(2)-file))))) \
Patrick Georgi1eee0762015-11-25 18:59:54 +0100265 $(eval tmp-cbfs-file:= ) \
266 $(if $($(2)-file), \
267 $(if $(wildcard $(1)$($(2)-file)), \
268 $(eval tmp-cbfs-file:= $(wildcard $(1)$($(2)-file))), \
269 $(eval tmp-cbfs-file:= $($(2)-file)))) \
Patrick Georgi70c85ea2013-02-16 01:06:57 +0100270 $(if $(strip $($(2)-required)), \
271 $(if $(wildcard $(tmp-cbfs-file)),, \
272 $(info This build configuration requires $($(2)-required)) \
273 $(eval FAILBUILD:=1) \
274 )) \
Patrick Georgi58396352014-12-09 12:49:21 +0100275 $(if $(strip $($(2)-align)), \
276 $(if $(strip $($(2)-position)), \
277 $(info ERROR: It is not allowed to specify both alignment and position for $($(2)-file)) \
278 $(eval FAILBUILD:=1) \
279 )) \
Patrick Georgi9b5b5362015-11-25 17:04:17 +0100280 $(eval _cbfs-bucket:=regular ) \
281 $(if $(strip $($(2)-position)), \
282 $(eval _cbfs-bucket:=fixed)) \
283 $(if $(strip $($(2)-align)), \
284 $(eval _cbfs-bucket:=aligned)) \
Patrick Georgi3bbd2bf2012-03-09 12:30:07 +0100285 $(if $(tmp-cbfs-method), \
286 $(eval tmp-old-cbfs-file:=$(tmp-cbfs-file)) \
Patrick Georgi16c7ad72012-09-21 18:11:59 +0200287 $(eval tmp-cbfs-file:=$(shell mkdir -p $(obj)/mainboard/$(MAINBOARDDIR); mktemp $(obj)/mainboard/$(MAINBOARDDIR)/cbfs-file.XXXXXX).out) \
Patrick Georgi3bbd2bf2012-03-09 12:30:07 +0100288 $(call cbfs-files-processor-$(tmp-cbfs-method),$(tmp-old-cbfs-file),$(tmp-cbfs-file))) \
Patrick Georgi1eee0762015-11-25 18:59:54 +0100289 $(if $(tmp-cbfs-file), \
Patrick Georgi67cb6aa2015-11-26 17:17:28 +0100290 $(eval cbfs-files-$(_cbfs-bucket) += $(subst $(spc),*,$(tmp-cbfs-file)|$(2)|$($(2)-type)|$($(2)-compression)|$(strip $($(2)-position))|$($(2)-align)|$($(2)-options)))) \
Patrick Georgi71b84802011-02-22 14:35:05 +0000291 $(eval $(2)-name:=) \
292 $(eval $(2)-type:=) \
Dave Frodin0013bbf2012-08-14 11:01:53 -0600293 $(eval $(2)-compression:=) \
Patrick Georgi70c85ea2013-02-16 01:06:57 +0100294 $(eval $(2)-position:=) \
Patrick Georgi58396352014-12-09 12:49:21 +0100295 $(eval $(2)-required:=) \
Patrick Georgi99ae5782015-11-26 16:37:45 +0100296 $(eval $(2)-options:=) \
Patrick Georgi58396352014-12-09 12:49:21 +0100297 $(eval $(2)-align:=)
Patrick Georgi71b84802011-02-22 14:35:05 +0000298
299#######################################################################
300# a variety of flags for our build
Stefan Reinauer63217582012-10-29 16:52:36 -0700301CBFS_COMPRESS_FLAG:=none
Sven Schnelle8eee19d2011-05-02 19:53:04 +0000302ifeq ($(CONFIG_COMPRESS_RAMSTAGE),y)
Stefan Reinauer63217582012-10-29 16:52:36 -0700303CBFS_COMPRESS_FLAG:=LZMA
Sven Schnelle8eee19d2011-05-02 19:53:04 +0000304endif
305
Stefan Reinauer63217582012-10-29 16:52:36 -0700306CBFS_PAYLOAD_COMPRESS_FLAG:=none
Patrick Georgi71b84802011-02-22 14:35:05 +0000307ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y)
Stefan Reinauer63217582012-10-29 16:52:36 -0700308CBFS_PAYLOAD_COMPRESS_FLAG:=LZMA
Patrick Georgi71b84802011-02-22 14:35:05 +0000309endif
310
Julius Werner09f29212015-09-29 13:51:35 -0700311CBFS_PRERAM_COMPRESS_FLAG:=none
312ifeq ($(CONFIG_COMPRESS_PRERAM_STAGES),y)
313CBFS_PRERAM_COMPRESS_FLAG:=LZ4
314endif
315
Patrick Georgi71b84802011-02-22 14:35:05 +0000316ifneq ($(CONFIG_LOCALVERSION),"")
Martin Rothe2362042015-02-12 19:32:41 -0700317export COREBOOT_EXTRA_VERSION := -$(call strip_quotes,$(CONFIG_LOCALVERSION))
Patrick Georgi71b84802011-02-22 14:35:05 +0000318endif
319
Aaron Durbindc9f5cd2015-09-08 13:34:43 -0500320CPPFLAGS_common := -Isrc -Isrc/include -Isrc/commonlib/include -I$(obj)
Patrick Georgi58f73a62014-05-17 14:00:12 +0200321CPPFLAGS_common += -Isrc/device/oprom/include
Aaron Durbincbb6c752015-12-15 15:57:11 -0600322VB_SOURCE ?= 3rdparty/vboot
323CPPFLAGS_common += -I$(VB_SOURCE)/firmware/include
Patrick Georgi58f73a62014-05-17 14:00:12 +0200324CPPFLAGS_common += -include $(src)/include/kconfig.h
Jimmy Huangb87bb292015-11-30 18:16:42 +0800325CPPFLAGS_common += -I3rdparty
Patrick Georgi71b84802011-02-22 14:35:05 +0000326
Vadim Bendebury55cdc162014-04-22 17:06:43 -0700327CFLAGS_common += -pipe -g -nostdinc
Furquan Shaikh99ac98f2014-04-23 10:18:48 -0700328CFLAGS_common += -nostdlib -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes
329CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs
Paul Menzel23b4e4c2015-04-08 10:53:39 +0200330CFLAGS_common += -Wstrict-aliasing -Wshadow
Stefan Reinauerd146ac62015-07-31 13:50:03 -0700331CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer
332CFLAGS_common += -ffunction-sections -fdata-sections
Paul Menzel23b4e4c2015-04-08 10:53:39 +0200333
Aaron Durbind4dd44c2015-09-06 10:15:17 -0500334LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs
335
Paul Menzel23b4e4c2015-04-08 10:53:39 +0200336ifeq ($(CONFIG_COMPILER_GCC),y)
337# cf. commit f69a99db (coreboot: x86: enable gc-sections)
338CFLAGS_common += -Wno-unused-but-set-variable
339endif
340
Patrick Georgi71b84802011-02-22 14:35:05 +0000341ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y)
Furquan Shaikh99ac98f2014-04-23 10:18:48 -0700342CFLAGS_common += -Werror
Patrick Georgi71b84802011-02-22 14:35:05 +0000343endif
Vadim Bendebury55cdc162014-04-22 17:06:43 -0700344ifneq ($(GDB_DEBUG),)
Stefan Reinauer87200e22015-03-15 00:21:17 +0100345CFLAGS_common += -Og
Vadim Bendebury55cdc162014-04-22 17:06:43 -0700346else
347CFLAGS_common += -Os
348endif
349
Nico Hubera15cd662013-06-19 16:16:05 +0200350additional-dirs := $(objutil)/cbfstool $(objutil)/romcc $(objutil)/ifdtool \
Zheng Bao9c7ff7b2015-11-17 22:57:39 +0800351 $(objutil)/ifdfake $(objutil)/options $(objutil)/amdfwtool \
Paul Burtonb1688ca2014-06-14 00:09:49 +0100352 $(objutil)/cbootimage $(objutil)/bimgtool
Patrick Georgi71b84802011-02-22 14:35:05 +0000353
354#######################################################################
355# generate build support files
356$(obj)/build.h: .xcompile
357 @printf " GEN build.h\n"
358 rm -f $(obj)/build.h
Martin Rothe2362042015-02-12 19:32:41 -0700359 util/genbuild_h/genbuild_h.sh > $(obj)/build.ht
Patrick Georgi71b84802011-02-22 14:35:05 +0000360 mv $(obj)/build.ht $(obj)/build.h
361
Kyösti Mälkki0db2ae3a2012-04-19 12:00:06 +0300362build-dirs:
363 mkdir -p $(objcbfs) $(objgenerated)
364
Patrick Georgi71b84802011-02-22 14:35:05 +0000365#######################################################################
366# Build the tools
Patrick Georgi533c1192014-07-10 09:42:03 +0200367CBFSTOOL:=$(objutil)/cbfstool/cbfstool
Sol Boucher69b88bf2015-02-26 11:47:19 -0800368FMAPTOOL:=$(objutil)/cbfstool/fmaptool
Patrick Georgi533c1192014-07-10 09:42:03 +0200369RMODTOOL:=$(objutil)/cbfstool/rmodtool
Patrick Georgi71b84802011-02-22 14:35:05 +0000370
Patrick Georgi533c1192014-07-10 09:42:03 +0200371$(obj)/cbfstool: $(CBFSTOOL)
Patrick Georgi71b84802011-02-22 14:35:05 +0000372 cp $< $@
373
Sol Boucher69b88bf2015-02-26 11:47:19 -0800374$(obj)/fmaptool: $(FMAPTOOL)
375 cp $< $@
376
Patrick Georgi533c1192014-07-10 09:42:03 +0200377$(obj)/rmodtool: $(RMODTOOL)
Aaron Durbin3eb8eb72014-03-10 16:13:58 -0500378 cp $< $@
379
Patrick Georgi71b84802011-02-22 14:35:05 +0000380_WINCHECK=$(shell uname -o 2> /dev/null)
381STACK=
382ifeq ($(_WINCHECK),Msys)
383 STACK=-Wl,--stack,16384000
384endif
385ifeq ($(_WINCHECK),Cygwin)
386 STACK=-Wl,--stack,16384000
387endif
388
Patrick Georgie24a1192014-05-17 19:05:56 +0200389# this allows ccache to prepend itself
390# (ccache handling happens first)
391ROMCC_BIN= $(objutil)/romcc/romcc
392ROMCC?=$(ROMCC_BIN)
393$(ROMCC_BIN): $(top)/util/romcc/romcc.c
Patrick Georgi71b84802011-02-22 14:35:05 +0000394 @printf " HOSTCC $(subst $(obj)/,,$(@)) (this may take a while)\n"
395 @# Note: Adding -O2 here might cause problems. For details see:
396 @# http://www.coreboot.org/pipermail/coreboot/2010-February/055825.html
397 $(HOSTCC) -g $(STACK) -Wall -o $@ $<
398
Stefan Reinauer5b635792012-08-16 14:05:42 -0700399IFDTOOL:=$(objutil)/ifdtool/ifdtool
400$(IFDTOOL): $(top)/util/ifdtool/ifdtool.c
401 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
402 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
403
Nico Hubera15cd662013-06-19 16:16:05 +0200404IFDFAKE:=$(objutil)/ifdfake/ifdfake
405$(IFDFAKE): $(top)/util/ifdfake/ifdfake.c
406 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
407 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
408
Zheng Bao9c7ff7b2015-11-17 22:57:39 +0800409AMDFWTOOL:=$(objutil)/amdfwtool/amdfwtool
410$(AMDFWTOOL): $(top)/util/amdfwtool/amdfwtool.c
Bruce Griffith1a590392014-08-10 17:09:15 -0600411 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
Zheng Bao9c7ff7b2015-11-17 22:57:39 +0800412 $(HOSTCC) $(HOSTCFLAGS) -DCONFIG_ROM_SIZE=$(CONFIG_ROM_SIZE) -o $@ $<
Bruce Griffith1a590392014-08-10 17:09:15 -0600413
Isaac Christensen3a92be72014-09-08 15:28:17 -0600414CBOOTIMAGE:=$(objutil)/cbootimage/cbootimage
415
Patrick Georgibda8a04b2016-02-01 12:03:04 +0100416FUTILITY:=$(objutil)/futility/futility
417
Patrick Georgi758f26a2014-09-27 11:37:46 +0200418subdirs-y += util/nvidia
Isaac Christensen3a92be72014-09-08 15:28:17 -0600419
Paul Burtonb1688ca2014-06-14 00:09:49 +0100420BIMGTOOL:=$(objutil)/bimgtool/bimgtool
421$(BIMGTOOL): $(top)/util/bimgtool/bimgtool.c
422 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
423 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
424
Martin Rothf4b7f222016-02-28 21:04:15 -0700425$(obj)/config.h: $(objutil)/kconfig/conf
426
Patrick Georgi71b84802011-02-22 14:35:05 +0000427#######################################################################
428# needed objects that every mainboard uses
429# Creation of these is architecture and mainboard independent
430$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/devicetree.cb $(objutil)/sconfig/sconfig
431 @printf " SCONFIG $(subst $(src)/,,$(<))\n"
432 mkdir -p $(obj)/mainboard/$(MAINBOARDDIR)
433 $(objutil)/sconfig/sconfig $(MAINBOARDDIR) $(obj)/mainboard/$(MAINBOARDDIR)
434
435ramstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
Stefan Reinauer57879c92012-07-31 16:47:25 -0700436romstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
Aaron Durbin75c51d92015-09-29 16:31:20 -0500437verstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
Patrick Georgi71b84802011-02-22 14:35:05 +0000438
Patrick Georgi27ef6022015-04-30 14:25:14 +0200439$(objgenerated)/libverstage.a: $$(libverstage-objs)
Patrick Georgiba808872015-04-27 18:09:22 +0200440 rm -f $@
Patrick Georgib11be322015-05-07 22:27:01 +0200441 $(AR_libverstage) rcsT $@ $^
Patrick Georgiba808872015-04-27 18:09:22 +0200442
Patrick Georgi71b84802011-02-22 14:35:05 +0000443#######################################################################
444# Clean up rules
445clean-abuild:
446 rm -rf coreboot-builds
447
448clean-for-update-target:
Nico Huber98fc4262016-01-23 01:24:33 +0100449 rm -f $(obj)/ramstage?* $(obj)/coreboot.romstage $(obj)/coreboot.pre* $(obj)/coreboot.bootblock $(obj)/coreboot.a
450 rm -rf $(obj)/bootblock?* $(obj)/romstage?* $(obj)/location.*
Patrick Georgi71b84802011-02-22 14:35:05 +0000451 rm -f $(obj)/option_table.* $(obj)/crt0.S $(obj)/ldscript
452 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/static.c $(obj)/mainboard/$(MAINBOARDDIR)/config.py $(obj)/mainboard/$(MAINBOARDDIR)/static.dot
453 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/crt0.s $(obj)/mainboard/$(MAINBOARDDIR)/crt0.disasm
454 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc
Martin Roth4fdd8032016-01-04 10:44:13 -0700455 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/bootblock.* $(obj)/dsdt.*
Patrick Georgi71b84802011-02-22 14:35:05 +0000456 rm -f $(obj)/cpu/x86/smm/smm_bin.c $(obj)/cpu/x86/smm/smm.* $(obj)/cpu/x86/smm/smm
Martin Roth501005f2015-06-24 20:03:08 -0600457 $(MAKE) -C payloads/external/SeaBIOS -f Makefile.inc clean
Martin Rothdbae4d02015-12-11 12:24:33 -0700458 $(MAKE) -C payloads/external/U-Boot -f Makefile.inc clean
Patrick Georgi71b84802011-02-22 14:35:05 +0000459
460clean-target:
461 rm -f $(obj)/coreboot*
462
463#######################################################################
464# Development utilities
465printcrt0s:
466 @echo crt0s=$(crt0s)
467 @echo ldscripts=$(ldscripts)
468
469update:
470 dongle.py -c /dev/term/1 $(obj)/coreboot.rom EOF
471
Patrick Georgicb02cb72012-02-25 19:42:59 +0100472lint lint-stable:
Martin Rothe4fc4072015-10-13 13:40:59 -0600473 util/lint/lint $@
Patrick Georgi6c445502011-05-16 15:32:28 +0000474
Patrick Georgibb605282011-06-05 15:15:49 +0200475gitconfig:
Patrick Georgi1b770fb2015-03-04 15:03:05 +0100476 [ -d .git ]
Zheng Bao50ad0952012-10-22 16:29:37 +0800477 mkdir -p .git/hooks
zbaof2c32542012-08-10 15:44:02 +0800478 for hook in commit-msg pre-commit ; do \
479 if [ util/gitconfig/$$hook -nt .git/hooks/$$hook -o \
480 ! -x .git/hooks/$$hook ]; then \
Patrick Georgif3947152015-04-28 21:36:11 +0200481 sed -e "s,%MAKE%,$(MAKE),g" util/gitconfig/$$hook > .git/hooks/$$hook; \
zbaof2c32542012-08-10 15:44:02 +0800482 chmod +x .git/hooks/$$hook; \
483 fi; \
484 done
Stefan Reinauer11186dd2015-06-13 10:45:40 +0200485 # Now set up thehooks for 3rdparty/blobs
Patrick Georgiaaa3b4a2016-02-10 00:20:55 +0100486 if [ -d .git/modules/3rdparty/hooks -a \
Patrick Georgi11ac97b2015-07-06 09:31:42 +0000487 \( util/gitconfig/commit-msg -nt .git/modules/3rdparty/hooks/commit-msg -o \
488 ! -x .git/modules/3rdparty/hooks/commit-msg \) ]; then \
489 sed -e "s,%MAKE%,$(MAKE),g" util/gitconfig/commit-msg > .git/modules/3rdparty/hooks/commit-msg; \
490 chmod +x .git/modules/3rdparty/hooks/commit-msg; \
Stefan Reinauer11186dd2015-06-13 10:45:40 +0200491 fi
492 [ -d 3rdparty/blobs ] && cd 3rdparty/blobs && git config remote.origin.push HEAD:refs/for/master
Ronald G. Minnich64b364d2013-01-03 08:26:09 -0800493 git config remote.origin.push HEAD:refs/for/master
Patrick Georgibb605282011-06-05 15:15:49 +0200494 (git config --global user.name >/dev/null && git config --global user.email >/dev/null) || (printf 'Please configure your name and email in git:\n\n git config --global user.name "Your Name Comes Here"\n git config --global user.email your.email@example.com\n'; exit 1)
495
Stefan Reinauerd5779c12016-01-29 17:48:47 -0800496include util/crossgcc/Makefile.inc
Martin Roth76f14b22015-11-18 13:09:23 -0700497
Stefan Reinauerd5779c12016-01-29 17:48:47 -0800498.PHONY: tools
Patrick Georgibda8a04b2016-02-01 12:03:04 +0100499tools: $(objutil)/kconfig/conf $(CBFSTOOL) $(FMAPTOOL) $(RMODTOOL) $(objutil)/nvramtool/nvramtool $(ROMCC_BIN) $(objutil)/sconfig/sconfig $(IFDTOOL) $(IFDFAKE) $(CBOOTIMAGE) $(AMDFWTOOL) $(FUTILITY)
Patrick Georgi43105d62011-11-05 14:44:41 +0100500
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700501###########################################################################
502# Common recipes for all stages
503###########################################################################
504
Julius Wernerec5e5e02014-08-20 15:29:56 -0700505# loadaddr can determine the load address of a stage, which may be needed for
506# platform-specific image headers (only works *after* the stage has been built)
507loadaddr = $(shell $(OBJDUMP_$(1)) -p $(objcbfs)/$(1).debug | \
508 sed -ne '/LOAD/s/^.*vaddr 0x\([0-9a-fA-F]\{8\}\).*$$/0x\1/p')
509
Furquan Shaikh99ac98f2014-04-23 10:18:48 -0700510# find-substr is required for stages like romstage_null and romstage_xip to
511# eliminate the _* part of the string
512find-substr = $(word 1,$(subst _, ,$(1)))
513
514# find-class is used to identify the class from the name of the stage
515# The input to this macro can be something like romstage.x or romstage.x.y
516# find-class recursively strips off the suffixes to extract the exact class name
517# e.g.: if romstage.x is provided to find-class, it will remove .x and return romstage
518# if romstage.x.y is provided, it will first remove .y, call find-class with romstage.x
519# and remove .x the next time and finally return romstage
520find-class = $(if $(filter $(1),$(basename $(1))),$(if $(CC_$(1)), $(1), $(call find-substr,$(1))),$(call find-class,$(basename $(1))))
521
Aaron Durbind972f782015-09-17 17:02:53 -0500522# Bootblocks are not CBFS stages. coreboot is currently expecting the bss to
523# be cleared by the loader of the stage. For ARM SoCs that means one needs to
524# include the bss section in the binary so the BootROM clears the bss on
525# loading of the bootblock stage. Achieve this by marking the bss section
526# loadable,allocatable, and data. Do the same for the .data section in case
527# it's marked as NOBITS.
528$(objcbfs)/bootblock.raw.bin: $(objcbfs)/bootblock.elf
529 @printf " OBJCOPY $(notdir $(@))\n"
530 $(OBJCOPY_bootblock) --set-section-flags .bss=load,alloc,data --set-section-flags .data=load,alloc,data $< $<.tmp
531 $(OBJCOPY_bootblock) -O binary $<.tmp $@
532
533$(objcbfs)/%.bin: $(objcbfs)/%.raw.bin
534 cp $< $@
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700535
536$(objcbfs)/%.elf: $(objcbfs)/%.debug
Furquan Shaikh99ac98f2014-04-23 10:18:48 -0700537 $(eval class := $(call find-class,$(@F)))
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700538 @printf " OBJCOPY $(subst $(obj)/,,$(@))\n"
539 cp $< $@.tmp
Furquan Shaikh99ac98f2014-04-23 10:18:48 -0700540 $(NM_$(class)) -n $@.tmp | sort > $(basename $@).map
541 $(OBJCOPY_$(class)) --strip-debug $@.tmp
542 $(OBJCOPY_$(class)) --add-gnu-debuglink=$< $@.tmp
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700543 mv $@.tmp $@
544
545###########################################################################
546# Build the final rom image
547###########################################################################
548
Martin Rothfdaf9cc2015-12-11 11:40:06 -0700549# extract_nth - Return a subsection of the $file string
550#
551# the input string looks like this:
552# ./build/cbfs/fallback/romstage.elf|fallback/romstage|stage|none||64|--xip*-S*.car.data*-P*0x10000
553#
554# Sections:
555# 1 - Path and name of file [FILENAME: Added to cbfs-files-y list variable]
556# 2 - Name of file in cbfs [$(FILENAME)-file]
557# 3 - File type: [$(FILENAME)-type]
558# bootblock, cbfs header, stage, payload, optionrom, bootsplash, raw, vsa,
559# mbi, microcode, fsp, mrc, cmos_default, cmos_layout, spd, mrc_cache,
560# mma, efi, deleted, null
561# 4 - Compression type [$(FILENAME)-compression]
562# none, LZMA
563# 5 - Base address [$(FILANAME)-position]
564# 6 - Alignment [$(FILENAME)-align]
565# 7 - cbfstool flags [$(FILENAME)-options]
566#
567# Input:
568# $(1) = Section to extract
569# $(2) = Input string
570#
571# Steps:
572# 1) replace all '|' characters with the sequence '- -' within the full string, prepended and appended with the character '-'
573# 2) extract the specified section from the string - this gets us the section surrounded by '-' characters
574# 3) remove the leading and trailing '-' characters
575# 4) replace all '*' characters with spaces
Patrick Georgi67cb6aa2015-11-26 17:17:28 +0100576extract_nth=$(subst *,$(spc),$(patsubst -%-,%,$(word $(1), $(subst |,- -,-$(2)-))))
Patrick Georgi58396352014-12-09 12:49:21 +0100577
Patrick Georgie02be0e2016-01-18 16:24:10 +0100578# regions-for-file - Returns a cbfstool regions parameter
579# $(call regions-for-file,$(filename))
580# returns "REGION1,REGION2,..."
581#
582# This is the default implementation. When using a boot strategy employing
583# multiple CBFSes in fmap regions, override it.
584regions-for-file ?= COREBOOT
585
Patrick Georgi1bf5e642016-01-28 22:34:50 +0100586# options-for-region
587# $(call options-for-region,$(filename),$(region),$(options))
588#
589# Returns potentially modified options, depending on file and region.
590# Default is to return it unmodified
591options-for-region ?= $(3)
592
Werner Zehc0fb3612016-01-14 15:08:36 +0100593ifeq ($(CONFIG_CBFS_AUTOGEN_ATTRIBUTES),y)
594 cbfs-autogen-attributes=-g
595endif
596
Patrick Georgiefe7ff0f2016-01-28 22:22:38 +0100597# cbfs-add-cmd-for-region
598# $(call cbfs-add-cmd-for-region,file in extract_nth format,region name)
599define cbfs-add-cmd-for-region
Patrick Georgi4ba65aa2016-01-28 21:32:33 +0100600 $(CBFSTOOL) $@.tmp \
Martin Rothdbae4d02015-12-11 12:24:33 -0700601 add$(if $(filter stage,$(call extract_nth,3,$(1))),-stage)$(if \
602 $(filter payload,$(call extract_nth,3,$(1))),-payload)$(if \
603 $(filter flat-binary,$(call extract_nth,3,$(1))),-flat-binary) \
Patrick Georgi93d53672016-01-28 21:47:31 +0100604 -f $(call extract_nth,1,$(1)) \
605 -n $(call extract_nth,2,$(1)) \
Martin Rothdbae4d02015-12-11 12:24:33 -0700606 $(if $(filter-out flat-binary,$(filter-out stage,$(call \
607 extract_nth,3,$(1)))),-t $(call extract_nth,3,$(1))) \
Patrick Georgi60fad892016-01-28 21:51:55 +0100608 $(if $(call extract_nth,4,$(1)),-c $(call extract_nth,4,$(1))) \
609 $(cbfs-autogen-attributes) \
Patrick Georgiefe7ff0f2016-01-28 22:22:38 +0100610 -r $(2) \
Patrick Georgi1bf5e642016-01-28 22:34:50 +0100611 $(call options-for-region,$(call extract_nth,2,$(1)),$(2), \
612 $(if $(call extract_nth,6,$(1)),-a $(call extract_nth,6,$(file)), \
613 $(if $(call extract_nth,5,$(file)),-b $(call extract_nth,5,$(file)))) \
614 $(call extract_nth,7,$(1)))
Patrick Georgiefe7ff0f2016-01-28 22:22:38 +0100615
616endef
617# Empty line before endef is necessary so cbfs-add-cmd-for-region ends in a
618# newline
619
620# cbfs-add-cmd
621# $(call cbfs-add-cmd,file in extract_nth format,non-empty if file removal requested)
622define cbfs-add-cmd
623 printf " CBFS $(call extract_nth,2,$(1))\n"
624 $(if $(2),-$(CBFSTOOL) $@.tmp remove -n $(call extract_nth,2,$(file)) 2>/dev/null)
625 $(eval _tmp-cbfs-add-cmd-regions=$(call regions-for-file,$(call extract_nth,2,$(1)))) \
626 $(foreach region,$(subst $(comma),$(spc),$(_tmp-cbfs-add-cmd-regions)), \
627 $(call cbfs-add-cmd-for-region,$(1),$(region)))
Patrick Georgi172f8862016-01-28 21:37:16 +0100628endef
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700629
Patrick Georgi9b5b5362015-11-25 17:04:17 +0100630cbfs-files=$(cbfs-files-fixed) $(cbfs-files-aligned) $(cbfs-files-regular)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700631prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file)))
Patrick Georgiddc30762016-01-28 21:57:29 +0100632prebuild-files = $(foreach file,$(cbfs-files), $(call cbfs-add-cmd,$(file),$(CONFIG_UPDATE_IMAGE)))
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700633
Patrick Georgiddc30762016-01-28 21:57:29 +0100634ifneq ($(CONFIG_UPDATE_IMAGE),y)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200635ifeq ($(CONFIG_FMDFILE),)
636# For a description of the flash layout described by these variables, check
637# the $(DEFAULT_FLASHMAP) .fmd files.
638ifeq ($(CONFIG_ARCH_X86),y)
639DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default-x86.fmd
640# entire flash
641FMAP_ROM_ADDR := $(call int-subtract, 0x100000000 $(CONFIG_ROM_SIZE))
642FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
643# entire "BIOS" region (everything directly of concern to the host system)
644# relative to ROM_BASE
645FMAP_BIOS_BASE := $(call int-subtract, $(CONFIG_ROM_SIZE) $(CONFIG_CBFS_SIZE))
Martin Rothacc94a72015-12-26 17:02:41 -0700646FMAP_BIOS_SIZE := $(shell echo $(CONFIG_CBFS_SIZE) | tr A-F a-f)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200647# position and size of flashmap, relative to BIOS_BASE
648FMAP_FMAP_BASE := 0
649FMAP_FMAP_SIZE := 0x100
650# position and size of CBFS, relative to BIOS_BASE
651FMAP_CBFS_BASE := $(FMAP_FMAP_SIZE)
652FMAP_CBFS_SIZE := $(call int-subtract, $(FMAP_BIOS_SIZE) $(FMAP_FMAP_SIZE))
Martin Rothc4c7f162016-01-20 14:52:08 -0700653else # ifeq ($(CONFIG_ARCH_X86),y)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200654DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default.fmd
655# entire flash
656FMAP_ROM_ADDR := 0
657FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
658# entire "BIOS" region (everything directly of concern to the host system)
659# relative to ROM_BASE
660FMAP_BIOS_BASE := 0
661FMAP_BIOS_SIZE := $(CONFIG_CBFS_SIZE)
662# position and size of flashmap, relative to BIOS_BASE
663FMAP_FMAP_BASE := 0x20000
664FMAP_FMAP_SIZE := 0x100
665# position and size of CBFS, relative to BIOS_BASE
666FMAP_CBFS_BASE := $(call int-add,$(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE))
667FMAP_CBFS_SIZE := $(call int-subtract,$(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE))
Martin Rothc4c7f162016-01-20 14:52:08 -0700668endif # ifeq ($(CONFIG_ARCH_X86),y)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200669
Martin Rothacc94a72015-12-26 17:02:41 -0700670$(obj)/fmap.fmd: $(top)/Makefile.inc $(DEFAULT_FLASHMAP) $(obj)/config.h
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200671 sed -e "s,##ROM_BASE##,$(FMAP_ROM_ADDR)," \
672 -e "s,##ROM_SIZE##,$(FMAP_ROM_SIZE)," \
673 -e "s,##BIOS_BASE##,$(FMAP_BIOS_BASE)," \
674 -e "s,##BIOS_SIZE##,$(FMAP_BIOS_SIZE)," \
675 -e "s,##FMAP_BASE##,$(FMAP_FMAP_BASE)," \
676 -e "s,##FMAP_SIZE##,$(FMAP_FMAP_SIZE)," \
677 -e "s,##CBFS_BASE##,$(FMAP_CBFS_BASE)," \
678 -e "s,##CBFS_SIZE##,$(FMAP_CBFS_SIZE)," \
679 $(DEFAULT_FLASHMAP) > $@.tmp
680 mv $@.tmp $@
Martin Rothc4c7f162016-01-20 14:52:08 -0700681else # ifeq ($(CONFIG_FMDFILE),)
Martin Rothacc94a72015-12-26 17:02:41 -0700682$(obj)/fmap.fmd: $(CONFIG_FMDFILE) $(obj)/config.h
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200683 cp $< $@
Martin Rothc4c7f162016-01-20 14:52:08 -0700684endif # ifeq ($(CONFIG_FMDFILE),)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200685
686# generated at the same time as fmap.fmap
687$(obj)/fmap.h: $(obj)/fmap.fmap
Patrick Georgibdaa1b52016-01-20 15:32:03 +0100688$(obj)/fmap.desc: $(obj)/fmap.fmap
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200689
690$(obj)/fmap.fmap: $(obj)/fmap.fmd $(FMAPTOOL)
Martin Rothacc94a72015-12-26 17:02:41 -0700691 echo " FMAP $(FMAPTOOL) -h $(obj)/fmap.h $< $@"
Patrick Georgibdaa1b52016-01-20 15:32:03 +0100692 $(FMAPTOOL) -h $(obj)/fmap.h -R $(obj)/fmap.desc $< $@
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200693
Patrick Georgibdaa1b52016-01-20 15:32:03 +0100694$(obj)/coreboot.pre: $(objcbfs)/bootblock.bin $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file) $(obj)/fmap.fmap $(obj)/fmap.desc
695 $(CBFSTOOL) $@.tmp create -M $(obj)/fmap.fmap -r $(shell cat $(obj)/fmap.desc)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200696ifeq ($(CONFIG_ARCH_X86),y)
697 $(CBFSTOOL) $@.tmp add \
698 -f $(objcbfs)/bootblock.bin \
699 -n bootblock \
700 -t bootblock \
Werner Zehc0fb3612016-01-14 15:08:36 +0100701 -b -$(call file-size,$(objcbfs)/bootblock.bin) $(cbfs-autogen-attributes)
Martin Rothc4c7f162016-01-20 14:52:08 -0700702else # ifeq ($(CONFIG_ARCH_X86),y)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200703 # don't add bootblock to cbfs yet, it's just a waste of space
704 true $(CBFSTOOL) $@.tmp add \
705 -f $(objcbfs)/bootblock.bin \
706 -n bootblock \
707 -t bootblock \
708 -b 0
709 $(CBFSTOOL) $@.tmp write -u \
710 -r BOOTBLOCK \
711 -f $(objcbfs)/bootblock.bin
712 # make space for the CBFS master header pointer. "ptr_" is just
713 # arbitrary 4 bytes that will be overwritten by add-master-header.
714 printf "ptr_" > $@.tmp.2
715 $(CBFSTOOL) $@.tmp add \
716 -f $@.tmp.2 \
717 -n "header pointer" \
718 -t "cbfs header" \
719 -b -4
720 rm -f $@.tmp.2
Martin Rothc4c7f162016-01-20 14:52:08 -0700721endif # ifeq ($(CONFIG_ARCH_X86),y)
Patrick Georgi8a3592e2015-09-16 18:10:52 +0200722 $(CBFSTOOL) $@.tmp add-master-header
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700723 $(prebuild-files) true
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700724 mv $@.tmp $@
Martin Rothc4c7f162016-01-20 14:52:08 -0700725else # ifneq ($(CONFIG_UPDATE_IMAGE),y)
Patrick Georgi708226e2015-11-26 17:22:38 +0100726.PHONY: $(obj)/coreboot.pre
727$(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL)
Martin Rothb8f8cdb2016-01-20 14:54:27 -0700728 mv $(obj)/coreboot.rom $@.tmp || \
729 (echo "Error: You have UPDATE_IMAGE set in Kconfig, but have no existing image to update." && \
Patrick Georgidd4b66e2016-01-26 22:25:40 +0100730 echo "Exiting." && \
Martin Rothb8f8cdb2016-01-20 14:54:27 -0700731 false)
Aaron Durbin999ed642015-06-03 11:54:59 -0500732 $(prebuild-files) true
733 mv $@.tmp $@
Martin Rothc4c7f162016-01-20 14:52:08 -0700734endif # ifneq ($(CONFIG_UPDATE_IMAGE),y)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700735
736ifeq ($(CONFIG_PAYLOAD_LINUX),y)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700737ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
Patrick Georgic2a0b7d2014-05-17 14:11:57 +0200738 ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700739endif
740ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
Patrick Georgic2a0b7d2014-05-17 14:11:57 +0200741 ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700742endif
743endif
Martin Rothdbae4d02015-12-11 12:24:33 -0700744ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
745 ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
746endif
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700747
748ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y)
749REFCODE_BLOB=$(obj)/refcode.rmod
750$(REFCODE_BLOB): $(RMODTOOL)
751 $(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@
752endif
753
Patrick Georgiec90adb2015-12-04 17:45:19 +0100754$(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $$(INTERMEDIATE)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700755 @printf " CBFS $(subst $(obj)/,,$(@))\n"
Julius Wernerf780c402014-11-10 13:11:50 -0800756# The full ROM may be larger than the CBFS part, so create an empty
757# file (filled with \377 = 0xff) and copy the CBFS image over it.
WANG Siyuande8c7802015-04-22 15:22:00 +0800758 dd if=/dev/zero bs=$(call _toint,$(CONFIG_ROM_SIZE)) count=1 2> /dev/null | tr '\000' '\377' > $@.tmp
Julius Wernerf780c402014-11-10 13:11:50 -0800759 dd if=$(obj)/coreboot.pre of=$@.tmp bs=8192 conv=notrunc 2> /dev/null
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700760ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
761ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
762 @printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
763 $(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
764endif
765endif
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700766ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y)
Timothy Pearson855fc1f2015-10-14 15:41:49 -0500767ifeq ($(CONFIG_CPU_MICROCODE_CBFS_GENERATE),y)
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700768 @printf " UPDATE-FIT \n"
769 $(CBFSTOOL) $@.tmp update-fit -n cpu_microcode_blob.bin -x $(CONFIG_CPU_INTEL_NUM_FIT_ENTRIES)
770endif
771endif
772 mv $@.tmp $@
773 @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n"
774 $(CBFSTOOL) $@ print
Martin Roth77c67b32015-06-25 09:36:27 -0600775ifeq ($(CONFIG_IASL_WARNINGS_ARE_ERRORS),)
776 @printf "\n***** WARNING: IASL warnings as errors is disabled! *****\n"
777 @printf "***** Please fix the ASL for this platform. *****\n\n"
778endif
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700779
Patrick Georgi1cab0122015-11-26 16:39:23 +0100780cbfs-files-y += $(CONFIG_CBFS_PREFIX)/romstage
781$(CONFIG_CBFS_PREFIX)/romstage-file := $(objcbfs)/romstage.elf
782$(CONFIG_CBFS_PREFIX)/romstage-type := stage
Julius Werner09f29212015-09-29 13:51:35 -0700783$(CONFIG_CBFS_PREFIX)/romstage-compression := $(CBFS_PRERAM_COMPRESS_FLAG)
Patrick Georgi1cab0122015-11-26 16:39:23 +0100784ifeq ($(CONFIG_ARCH_ROMSTAGE_ARM),y)
785$(CONFIG_CBFS_PREFIX)/romstage-options := -b 0
786endif
787ifeq ($(CONFIG_ARCH_ROMSTAGE_X86_32)$(CONFIG_ARCH_ROMSTAGE_X86_64),y)
788# Use a 64 byte alignment to provide a minimum alignment
789# requirement for the overall romstage. While the first object within
790# romstage could have a 4 byte minimum alignment that doesn't mean the linker
791# won't decide the entire section should be aligned to a larger value. In the
792# future cbfstool should add XIP files proper and honor the alignment
793# requirements of the program segment.
794#
795# Make sure that segment for .car.data is ignored while adding romstage.
796$(CONFIG_CBFS_PREFIX)/romstage-align := 64
797$(CONFIG_CBFS_PREFIX)/romstage-options := --xip -S .car.data -P $(CONFIG_XIP_ROM_SIZE)
798endif
799
Patrick Georgic35bd542015-11-25 18:21:53 +0100800cbfs-files-y += $(CONFIG_CBFS_PREFIX)/ramstage
801$(CONFIG_CBFS_PREFIX)/ramstage-file := $(objcbfs)/ramstage.elf
802$(CONFIG_CBFS_PREFIX)/ramstage-type := stage
803$(CONFIG_CBFS_PREFIX)/ramstage-compression := $(CBFS_COMPRESS_FLAG)
804
Patrick Georgi1cab0122015-11-26 16:39:23 +0100805cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
806$(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
Martin Rothdbae4d02015-12-11 12:24:33 -0700807ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
808$(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
809else
Patrick Georgi1cab0122015-11-26 16:39:23 +0100810$(CONFIG_CBFS_PREFIX)/payload-type := payload
Martin Rothdbae4d02015-12-11 12:24:33 -0700811endif
Patrick Georgi1cab0122015-11-26 16:39:23 +0100812$(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
813$(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
814
Patrick Georgic35bd542015-11-25 18:21:53 +0100815cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode
816$(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB)
817$(CONFIG_CBFS_PREFIX)/refcode-type := stage
818$(CONFIG_CBFS_PREFIX)/refcode-compression := $(CBFS_COMPRESS_FLAG)
819
820cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin
821vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE)
822vgaroms/seavgabios.bin-type := raw
823
824cbfs-files-$(CONFIG_PXE_ROM) += pci$(CONFIG_PXE_ROM_ID).rom
825pci$(CONFIG_PXE_ROM_ID).rom-file := $(CONFIG_PXE_ROM_FILE)
826pci$(CONFIG_PXE_ROM_ID).rom-type := raw
827
Patrick Georgi551b3832015-11-25 18:47:56 +0100828cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config
829config-file := $(DOTCONFIG):defconfig
830config-type := raw
831
832cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision
833revision-file := $(obj)/build.h
834revision-type := raw
835
Konstantin Aladyshev6544cb32015-01-24 18:52:10 +0400836cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash.jpg
Furquan Shaikh88ca81a2014-04-22 16:33:22 -0700837bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))
838bootsplash.jpg-type := bootsplash
839
Stefan Reinauerd06258c2015-03-26 16:29:00 -0700840cbfs-files-$(CONFIG_BOARD_ID_MANUAL) += board_id
841board_id-file := $(obj)/board_id
842board_id-type := raw
843
844$(obj)/board_id:
Vladimir Serbinenko93af2f22015-05-30 23:13:48 +0200845 printf $(CONFIG_BOARD_ID_STRING) > $@
Stefan Reinauerd06258c2015-03-26 16:29:00 -0700846
Martin Rothde9adeb2015-10-15 14:33:31 -0600847junit.xml:
Martin Roth917acb52015-10-21 15:28:21 -0600848 echo "Building $(UTIL)"
Martin Rothde9adeb2015-10-15 14:33:31 -0600849 echo '<?xml version="1.0" encoding="utf-8"?><testsuite>' > $@.tmp
Martin Rothde9adeb2015-10-15 14:33:31 -0600850 echo "<testcase classname='$(UTIL)' name='$(UTIL)'>" >> $@.tmp
Martin Roth917acb52015-10-21 15:28:21 -0600851 -$(MAKE) -j $(CPUS) -C "util/$(UTIL)" clean distclean > $@.tmp.2 2>&1
852 $(MAKE) -j $(CPUS) -C "util/$(UTIL)" >> $@.tmp.2 2>&1 && type="system-out" || type="failure"; \
853 cat $@.tmp.2; \
Martin Rothde9adeb2015-10-15 14:33:31 -0600854 if [ "$$type" = "failure" ]; then \
855 echo "<failure type='buildFailed'>" >> $@.tmp; \
Martin Roth917acb52015-10-21 15:28:21 -0600856 echo "Building $(UTIL) Failed"; \
Martin Rothde9adeb2015-10-15 14:33:31 -0600857 else \
858 echo "<$$type>" >> $@.tmp; \
Martin Roth917acb52015-10-21 15:28:21 -0600859 echo "Building $(UTIL) Succeeded"; \
Martin Rothde9adeb2015-10-15 14:33:31 -0600860 fi; \
861 echo '<![CDATA[' >> $@.tmp; \
862 cat $@.tmp.2 >> $@.tmp; \
863 echo "]]></$$type>" >>$@.tmp
864 rm -f $@.tmp.2
865 echo "</testcase>" >> $@.tmp
866 echo "</testsuite>" >> $@.tmp
867 mv $@.tmp "util/$(UTIL)/$@"
Martin Roth917acb52015-10-21 15:28:21 -0600868 echo
Martin Rothde9adeb2015-10-15 14:33:31 -0600869
Paul Menzeld98471c2015-10-18 11:45:52 +0200870TOOLLIST= \
871 cbmem \
Martin Roth1fec04b2015-10-21 15:29:13 -0600872 ectool \
Patrick Georgibda8a04b2016-02-01 12:03:04 +0100873 futility \
Paul Menzeld98471c2015-10-18 11:45:52 +0200874 inteltool \
Paul Menzel28a45d42015-10-18 11:47:45 +0200875 intelvbttool \
Martin Roth1fec04b2015-10-21 15:29:13 -0600876 nvramtool \
877 superiotool \
878 viatool
Patrick Georgie1514072015-07-31 16:54:12 +0200879JENKINS_PAYLOAD?=none
Patrick Georgic6a4aae2015-07-31 16:54:44 +0200880CPUS?=4
Patrick Georgi062e4082014-08-29 20:10:38 +0200881what-jenkins-does:
Martin Roth8d226f22015-10-13 15:08:01 -0600882 util/lint/lint lint-stable --junit
Martin Roth615f69e2015-10-13 12:29:19 -0600883 util/abuild/abuild -B -J $(if $(JENKINS_NOCCACHE),,-y) -c $(CPUS) -z -p $(JENKINS_PAYLOAD) -x -X $(top)/abuild-chromeos.xml
Patrick Georgic6a4aae2015-07-31 16:54:44 +0200884 util/abuild/abuild -B -J $(if $(JENKINS_NOCCACHE),,-y) -c $(CPUS) -z -p $(JENKINS_PAYLOAD)
Patrick Georgib551d8b2015-07-31 16:39:06 +0200885 (cd payloads/libpayload; unset COREBOOT_BUILD_DIR; $(MAKE) $(if $(JENKINS_NOCCACHE),,CONFIG_LP_CCACHE=y) V=$(V) Q=$(Q) junit.xml)
Martin Roth917acb52015-10-21 15:28:21 -0600886 $(foreach tool, $(TOOLLIST), $(MAKE) CPUS=$(CPUS) V=$(V) Q=$(Q) UTIL="$(tool)" MFLAGS= MAKEFLAGS= junit.xml; )