src/mainboard/supermicro/h8qgi/BiosCallOuts.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "AGESA.h"
#include "amdlib.h"
#include "BiosCallOuts.h"
#include "Ids.h"
#include "OptionsIds.h"
#include "heapManager.h"
#include <northbridge/amd/agesa/family15/dimmSpd.h>
#include <arch/io.h>

#ifdef __PRE_RAM__
/* These defines are used to select the appropriate socket for the SPD read
 * because this is a multi-socket design.
 */
#define PCI_REG_GPIO_56_to_53_CNTRL      (0x52)
#define GPIO_OUT_BIT_GPIO53              (BIT0)
#define GPIO_OUT_BIT_GPIO54              (BIT1)
#define GPIO_OUT_ENABLE_BIT_GPIO53       (BIT4)
#define GPIO_OUT_ENABLE_BIT_GPIO54       (BIT5)

#define GPIO_OUT_BIT_GPIO54_to_53_MASK \
	(GPIO_OUT_BIT_GPIO54 | GPIO_OUT_BIT_GPIO53)
#define GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK \
	(GPIO_OUT_ENABLE_BIT_GPIO54 | GPIO_OUT_ENABLE_BIT_GPIO53)

static UINT8 select_socket(UINT8 socket_id)
{
	device_t sm_dev       = PCI_DEV(0, 0x14, 0); //SMBus
	UINT8    value        = 0;
	UINT8    gpio56_to_53 = 0;

	/* Configure GPIO54,53 to select the desired socket
	 * GPIO54,53 control the HC4052 S1,S0
	 *  S1 S0 true table
	 *   0  0   channel 1 (Socket1)
	 *   0  1   channel 2 (Socket2)
	 *   1  0   channel 3 (Socket3)
	 *   1  1   channel 4 (Socket4)
	 */
	gpio56_to_53 = pci_read_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL);
	value  = gpio56_to_53 & (~GPIO_OUT_BIT_GPIO54_to_53_MASK);
	value |= socket_id;
	value &= (~GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK); // 0=Output Enabled, 1=Tristate
	pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, value);

	return gpio56_to_53;
}

static void restore_socket(UINT8 original_value)
{
	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBus
	pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, original_value);
}
#endif

static AGESA_STATUS board_ReadSpd (UINT32 Func,UINT32	Data,VOID *ConfigPtr);

#include <stdlib.h>
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
	{AGESA_ALLOCATE_BUFFER,			agesa_AllocateBuffer },
	{AGESA_DEALLOCATE_BUFFER,		agesa_DeallocateBuffer },
	{AGESA_LOCATE_BUFFER,			agesa_LocateBuffer },
	{AGESA_DO_RESET,			agesa_Reset },
	{AGESA_READ_SPD,			board_ReadSpd },
	{AGESA_READ_SPD_RECOVERY,		agesa_NoopUnsupported },
	{AGESA_RUNFUNC_ONAP,			agesa_RunFuncOnAp },
	{AGESA_GET_IDS_INIT_DATA,		agesa_EmptyIdsInitData },
	{AGESA_HOOKBEFORE_DQS_TRAINING,		agesa_NoopSuccess },
	{AGESA_HOOKBEFORE_DRAM_INIT,		agesa_NoopSuccess },
	{AGESA_HOOKBEFORE_EXIT_SELF_REF,	agesa_NoopSuccess },
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);

static AGESA_STATUS board_ReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	AGESA_STATUS Status;
#ifdef __PRE_RAM__
	UINT8 original_value = 0;

	if (ConfigPtr == NULL)
		return AGESA_ERROR;

	original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);

	Status = agesa_ReadSPD (Func, Data, ConfigPtr);

	restore_socket(original_value);
#else
	Status = AGESA_UNSUPPORTED;
#endif

	return Status;
}