Angel Pons | 8a3453f | 2020-04-02 23:48:19 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 | /* This file is part of the coreboot project. */ |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 3 | |
| 4 | |
| 5 | #include <console/console.h> |
| 6 | #include <device/i2c_bus.h> |
| 7 | #include <types.h> |
| 8 | |
| 9 | #include "ptn3460.h" |
| 10 | |
| 11 | /** |
| 12 | * \brief This function selects one of 7 EDID-tables inside PTN3460 |
| 13 | * which should be emulated on display port and turn emulation ON |
| 14 | * @param *dev Pointer to the relevant I2C controller |
| 15 | * @param edid_num Number of EDID to emulate (0..6) |
| 16 | * @return PTN_SUCCESS or error code |
| 17 | */ |
| 18 | static int ptn_select_edid(struct device *dev, uint8_t edid_num) |
| 19 | { |
| 20 | int status = 0; |
| 21 | u8 val; |
| 22 | |
| 23 | if (edid_num > PTN_MAX_EDID_NUM) |
| 24 | return PTN_INVALID_EDID; |
| 25 | val = (edid_num << 1) | PTN_ENABLE_EMULATION; |
| 26 | status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 4, val); |
| 27 | return status ? (PTN_BUS_ERROR | status) : PTN_SUCCESS; |
| 28 | } |
| 29 | |
| 30 | /** |
| 31 | * \brief This function writes one EDID data structure to PTN3460 |
| 32 | * @param *dev Pointer to the relevant I2C controller |
| 33 | * @param edid_num Number of EDID that must be written (0..6) |
| 34 | * @param *data Pointer to a buffer where data to write is stored in |
| 35 | * @return PTN_SUCCESS on success or error code |
| 36 | */ |
| 37 | static int ptn3460_write_edid(struct device *dev, u8 edid_num, u8 *data) |
| 38 | { |
| 39 | int status; |
| 40 | int i; |
| 41 | |
| 42 | if (edid_num > PTN_MAX_EDID_NUM) |
| 43 | return PTN_INVALID_EDID; |
| 44 | |
| 45 | /* First enable access to the desired EDID table */ |
| 46 | status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 5, edid_num); |
| 47 | if (status) |
| 48 | return (PTN_BUS_ERROR | status); |
| 49 | |
| 50 | /* Now we can simply write EDID data to ptn3460 */ |
| 51 | for (i = 0; i < PTN_EDID_LEN; i++) { |
| 52 | status = i2c_dev_writeb_at(dev, PTN_EDID_OFF + i, data[i]); |
| 53 | if (status) |
| 54 | return (PTN_BUS_ERROR | status); |
| 55 | } |
| 56 | return PTN_SUCCESS; |
| 57 | } |
| 58 | |
| 59 | /** |
| 60 | * \brief This function sets up the DP2LVDS-converter to be used with the |
| 61 | * appropriate EDID data |
| 62 | * @param *dev Pointer to the I2C controller where PTN3460 is attached |
| 63 | */ |
| 64 | static void ptn3460_init(struct device *dev) |
| 65 | { |
| 66 | struct ptn_3460_config cfg; |
| 67 | uint8_t edid_data[PTN_EDID_LEN], edid_tab, *ptr = (uint8_t *) &cfg; |
| 68 | int i, val; |
| 69 | |
| 70 | /* Mainboard provides EDID data. */ |
| 71 | if (mb_get_edid(edid_data) != CB_SUCCESS) { |
| 72 | printk(BIOS_ERR, "PTN3460 error: Unable to get EDID data from mainboard.\n"); |
| 73 | return; |
| 74 | } |
| 75 | |
| 76 | /* Mainboard decides which EDID table has to be used. */ |
| 77 | edid_tab = mb_select_edid_table(); |
| 78 | if (edid_tab > PTN_MAX_EDID_NUM) { |
| 79 | printk(BIOS_ERR, "PTN3460 error: invalid EDID table (%d) selected.\n", |
| 80 | edid_tab); |
| 81 | return; |
| 82 | } |
| 83 | /* Write EDID data into PTN. */ |
| 84 | val = ptn3460_write_edid(dev, edid_tab, edid_data); |
| 85 | if (val != PTN_SUCCESS) { |
| 86 | printk(BIOS_ERR, "PTN3460 error: writing EDID data into device failed.\n"); |
| 87 | return; |
| 88 | } |
| 89 | /* Activate the selected EDID block. */ |
| 90 | ptn_select_edid(dev, edid_tab); |
| 91 | /* Read out PTN configuration data. */ |
| 92 | for (i = 0; i < sizeof(struct ptn_3460_config); i++) { |
| 93 | val = i2c_dev_readb_at(dev, PTN_CONFIG_OFF + i); |
| 94 | if (val < 0) { |
| 95 | printk(BIOS_ERR, |
| 96 | "PTN3460 error: Unable to read config data from device.\n"); |
| 97 | return; |
| 98 | } |
| 99 | *ptr++ = (uint8_t)val; /* fill config structure via ptr */ |
| 100 | } |
| 101 | /* Mainboard can modify the configuration data. |
| 102 | Write back configuration data to PTN3460 if modified by mainboard */ |
| 103 | if (mb_adjust_cfg(&cfg) == PTN_CFG_MODIFIED) { |
| 104 | ptr = (uint8_t *) &cfg; |
| 105 | for (i = 0; i < sizeof(struct ptn_3460_config); i++) { |
| 106 | val = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + i, *ptr++); |
| 107 | if (val < 0) { |
| 108 | printk(BIOS_ERR, |
| 109 | "PTN3460 error: Unable to write config data.\n"); |
| 110 | return; |
| 111 | } |
| 112 | } |
| 113 | } |
| 114 | } |
| 115 | |
| 116 | __weak enum cb_err mb_get_edid(uint8_t edid_data[0x80]) |
| 117 | { |
| 118 | return CB_ERR; |
| 119 | } |
| 120 | __weak uint8_t mb_select_edid_table(void) |
| 121 | { |
| 122 | return 0; |
| 123 | } |
| 124 | __weak int mb_adjust_cfg(struct ptn_3460_config *cfg_ptr) |
| 125 | { |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | static struct device_operations ptn3460_ops = { |
| 130 | .read_resources = DEVICE_NOOP, |
| 131 | .set_resources = DEVICE_NOOP, |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 132 | .init = ptn3460_init, |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 133 | }; |
| 134 | |
| 135 | static void ptn3460_enable(struct device *dev) |
| 136 | { |
| 137 | dev->ops = &ptn3460_ops; |
| 138 | } |
| 139 | |
| 140 | struct chip_operations drivers_i2c_ptn3460_ops = { |
| 141 | CHIP_NAME("PTN3460") |
| 142 | .enable_dev = ptn3460_enable |
| 143 | }; |