Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License as |
| 7 | * published by the Free Software Foundation; version 2 of |
| 8 | * the License. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | */ |
| 15 | |
Kyösti Mälkki | 13f6650 | 2019-03-03 08:01:05 +0200 | [diff] [blame] | 16 | #include <device/mmio.h> |
Kyösti Mälkki | f1b58b7 | 2019-03-01 13:43:02 +0200 | [diff] [blame] | 17 | #include <device/pci_ops.h> |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 18 | #include <bootstate.h> |
| 19 | #include <console/console.h> |
| 20 | #include <device/pci_ids.h> |
| 21 | #include <device/pci_def.h> |
| 22 | #include <delay.h> |
| 23 | #include <soc/pci_devs.h> |
| 24 | #include <soc/QuarkNcSocId.h> |
| 25 | #include <soc/spi.h> |
Elyes HAOUAS | a1e22b8 | 2019-03-18 22:49:36 +0100 | [diff] [blame] | 26 | #include <string.h> |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 27 | |
| 28 | struct spi_context spi_driver_context = { |
| 29 | NULL, |
| 30 | 0, |
| 31 | 0 |
| 32 | }; |
| 33 | |
| 34 | void spi_bios_base(uint32_t bios_base_address) |
| 35 | { |
| 36 | uint32_t address; |
| 37 | volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr; |
| 38 | |
| 39 | /* Prevent all SPI operations below this address */ |
| 40 | address = 0xff000000 | bios_base_address; |
| 41 | ctrlr->bbar = address; |
| 42 | } |
| 43 | |
| 44 | void spi_controller_lock(void) |
| 45 | { |
| 46 | volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr; |
| 47 | |
| 48 | /* Prevent BIOS and system from changing the SPI controller setup */ |
| 49 | ctrlr->status |= SPISTS_CLD; |
| 50 | } |
| 51 | |
| 52 | int spi_protection(uint32_t address, uint32_t length) |
| 53 | { |
| 54 | uint32_t base; |
| 55 | volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr; |
| 56 | int index; |
| 57 | uint32_t limit; |
| 58 | uint32_t protect; |
| 59 | uint32_t value; |
| 60 | |
| 61 | /* Determine the protection range */ |
| 62 | base = address; |
| 63 | limit = address + length - 1; |
| 64 | protect = SPIPBR_WPE | (limit & SPIPBR_PRL) |
| 65 | | ((base >> SPIPBR_PRB_SHIFT) & SPIPBR_PRB); |
| 66 | |
| 67 | /* Walk the list of protected areas */ |
| 68 | for (index = 0; index < ARRAY_SIZE(ctrlr->pbr); index++) { |
| 69 | value = read32(&ctrlr->pbr[index]); |
| 70 | |
| 71 | /* Don't duplicate if the range is already protected */ |
| 72 | if (value == protect) |
| 73 | return 0; |
| 74 | |
| 75 | /* Use the first free register to protect this range */ |
| 76 | if ((value & SPIPBR_WPE) == 0) { |
| 77 | write32(&ctrlr->pbr[index], protect); |
| 78 | return 0; |
| 79 | } |
| 80 | } |
| 81 | |
| 82 | /* No free protection range registers */ |
| 83 | printk(BIOS_ERR, |
| 84 | "Failed to set protection: 0x%08x - 0x%08x, PRRs full!\n", |
| 85 | address, address + length - 1); |
| 86 | return -1; |
| 87 | } |
| 88 | |
| 89 | static int xfer(const struct spi_slave *slave, const void *dout, |
| 90 | size_t bytesout, void *din, size_t bytesin) |
| 91 | { |
| 92 | struct spi_context *context; |
| 93 | uint16_t control; |
| 94 | volatile struct flash_ctrlr *ctrlr; |
| 95 | uint8_t *data; |
| 96 | int index; |
| 97 | uint8_t opcode; |
| 98 | uint32_t status; |
| 99 | int type; |
| 100 | |
| 101 | /* Locate the context structure */ |
| 102 | context = &spi_driver_context; |
| 103 | ctrlr = context->ctrlr; |
| 104 | |
| 105 | /* Validate the buffer sizes */ |
| 106 | if (bytesin > sizeof(ctrlr->data)) { |
Paul Menzel | 1101534 | 2017-10-21 10:10:27 +0200 | [diff] [blame] | 107 | printk(BIOS_ERR, "bytesin > %zu\n", sizeof(ctrlr->data)); |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 108 | goto error; |
| 109 | } |
| 110 | |
| 111 | if (bytesin && (din == NULL)) { |
| 112 | printk(BIOS_ERR, "din is NULL\n"); |
| 113 | goto error; |
| 114 | } |
| 115 | |
| 116 | if (bytesout == 0) { |
| 117 | /* Check for a read operation */ |
| 118 | if (bytesin == 0) { |
| 119 | printk(BIOS_ERR, "bytesout and bytesin == 0\n"); |
| 120 | goto error; |
| 121 | } |
| 122 | |
| 123 | /* Issue the read operation */ |
| 124 | control = context->control; |
| 125 | control |= SPICTL_DC | ((bytesin - 1) << SPICTL_DBCNT_SHIFT); |
| 126 | goto start_cycle; |
| 127 | } |
| 128 | |
| 129 | /* Locate the opcode in the opcode table */ |
| 130 | data = (uint8_t *)dout; |
| 131 | opcode = *data++; |
| 132 | bytesout -= 1; |
| 133 | for (index = 0; index < sizeof(ctrlr->opmenu); index++) |
| 134 | if (opcode == ctrlr->opmenu[index]) |
| 135 | break; |
| 136 | |
| 137 | /* Check for a prefix byte */ |
| 138 | if (index == sizeof(ctrlr->opmenu)) { |
| 139 | for (index = 0; index < sizeof(ctrlr->prefix); index++) |
| 140 | if (opcode == ctrlr->prefix[index]) |
| 141 | break; |
| 142 | |
| 143 | /* Handle the unknown opcode error */ |
| 144 | if (index == sizeof(ctrlr->prefix)) { |
| 145 | printk(BIOS_ERR, "Unknown SPI flash opcode\n"); |
| 146 | goto error; |
| 147 | } |
| 148 | |
| 149 | /* Save the index for the next operation */ |
| 150 | context->prefix = index; |
| 151 | return 0; |
| 152 | } |
| 153 | |
| 154 | /* Get the opcode type */ |
| 155 | type = (ctrlr->type >> (index * 2)) |
| 156 | & (SPITYPE_ADDRESS | SPITYPE_PREFIX); |
| 157 | |
| 158 | /* Determine if the opcode has an address */ |
| 159 | if (type & SPITYPE_ADDRESS) { |
| 160 | if (bytesout < 3) { |
| 161 | printk(BIOS_ERR, "Missing address bytes\n"); |
| 162 | goto error; |
| 163 | } |
| 164 | |
| 165 | /* Use chip select 0 */ |
| 166 | ctrlr->address = (data[0] << 16) |
| 167 | | (data[1] << 8) |
| 168 | | data[2]; |
Martin Kepplinger | d9d351d | 2017-06-30 14:12:33 +0200 | [diff] [blame] | 169 | |
| 170 | /* read in order to flush the write buffer */ |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 171 | status = ctrlr->address; |
Martin Kepplinger | d9d351d | 2017-06-30 14:12:33 +0200 | [diff] [blame] | 172 | |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 173 | data += 3; |
| 174 | bytesout -= 3; |
| 175 | } |
| 176 | |
| 177 | /* Build the control value */ |
| 178 | control = (index << SPICTL_COPTR_SHIFT) |
| 179 | | (context->prefix << SPICTL_SOPTR_SHIFT) |
| 180 | | SPICTL_CG | SPICTL_AR; |
| 181 | if (bytesout) { |
| 182 | memcpy((void *)&ctrlr->data[0], data, bytesout); |
| 183 | control |= SPICTL_DC | ((bytesout - 1) << SPICTL_DBCNT_SHIFT); |
| 184 | } |
| 185 | |
| 186 | /* Save the control value for the read operation request */ |
| 187 | if (!(type & SPITYPE_PREFIX)) { |
| 188 | context->control = control; |
| 189 | return 0; |
| 190 | } |
| 191 | |
| 192 | /* Write operations require a prefix */ |
| 193 | control |= SPICTL_ACS; |
| 194 | |
| 195 | start_cycle: |
| 196 | /* Start the SPI cycle */ |
| 197 | ctrlr->control = control; |
| 198 | status = ctrlr->control; |
| 199 | context->prefix = 0; |
| 200 | |
| 201 | /* Wait for the access to complete */ |
| 202 | while ((status = ctrlr->status) & SPISTS_CIP) |
| 203 | udelay(1); |
| 204 | |
| 205 | /* Clear any errors */ |
| 206 | ctrlr->status = status; |
| 207 | |
| 208 | /* Handle the blocked access error */ |
| 209 | if (status & SPISTS_BA) { |
| 210 | printk(BIOS_ERR, "SPI access blocked!\n"); |
| 211 | return -1; |
| 212 | } |
| 213 | |
| 214 | /* Check for done */ |
| 215 | if (status & SPISTS_CD) { |
| 216 | /* Return any receive data */ |
| 217 | if (bytesin) |
| 218 | memcpy(din, (void *)&ctrlr->data[0], bytesin); |
| 219 | return 0; |
| 220 | } |
| 221 | |
| 222 | /* Handle the timeout error */ |
| 223 | printk(BIOS_ERR, "SPI transaction timeout!\n"); |
| 224 | |
| 225 | error: |
| 226 | context->prefix = 0; |
| 227 | return -1; |
| 228 | } |
| 229 | |
| 230 | void spi_init(void) |
| 231 | { |
| 232 | uint32_t bios_control; |
| 233 | struct spi_context *context; |
| 234 | volatile struct flash_ctrlr *ctrlr; |
Elyes HAOUAS | 696545d | 2018-05-25 13:11:37 +0200 | [diff] [blame] | 235 | struct device *dev; |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 236 | uint32_t rcba; |
| 237 | |
| 238 | /* Determine the base address of the SPI flash controller */ |
| 239 | context = &spi_driver_context; |
| 240 | dev = dev_find_device(PCI_VENDOR_ID_INTEL, LPC_DEVID, NULL); |
| 241 | rcba = pci_read_config32(dev, R_QNC_LPC_RCBA); |
| 242 | if (!(rcba & B_QNC_LPC_RCBA_EN)) { |
| 243 | printk(BIOS_ERR, "RBCA not enabled\n"); |
| 244 | return; |
| 245 | } |
| 246 | rcba &= B_QNC_LPC_RCBA_MASK; |
| 247 | ctrlr = (volatile struct flash_ctrlr *)rcba; |
| 248 | |
| 249 | /* Enable writes to the SPI flash */ |
| 250 | bios_control = pci_read_config32(dev, R_QNC_LPC_BIOS_CNTL); |
| 251 | bios_control |= B_QNC_LPC_BIOS_CNTL_BIOSWE; |
| 252 | pci_write_config32(dev, R_QNC_LPC_BIOS_CNTL, bios_control); |
| 253 | |
| 254 | /* Setup the SPI flash controller */ |
| 255 | context->ctrlr = ctrlr; |
| 256 | ctrlr->opmenu[0] = 0x03; /* Read */ |
| 257 | ctrlr->opmenu[1] = 0x0b; /* Read fast */ |
| 258 | ctrlr->opmenu[2] = 0x05; /* Read status */ |
| 259 | ctrlr->opmenu[3] = 0x9f; /* Read ID */ |
| 260 | ctrlr->opmenu[4] = 0x02; /* Page program */ |
| 261 | ctrlr->opmenu[5] = 0x20; /* Erase 4 KiB */ |
| 262 | ctrlr->opmenu[6] = 0xd8; /* Erase 64 KiB */ |
| 263 | ctrlr->opmenu[7] = 0x01; /* Write status */ |
| 264 | ctrlr->prefix[0] = 0x50; /* Write status enable */ |
| 265 | ctrlr->prefix[1] = 0x06; /* Write enable */ |
| 266 | ctrlr->type = SPITYPE_ADDRESS /* Read */ |
| 267 | | (SPITYPE_ADDRESS << 2) /* Read fast */ |
| 268 | | (0 << 4) /* Read status */ |
| 269 | | (0 << 6) /* Read ID */ |
| 270 | | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 8) /* Page program */ |
| 271 | | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 10) /* Erase 4 KiB */ |
| 272 | | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 12) /* Erase 64 KiB */ |
| 273 | | (SPITYPE_PREFIX << 14); /* Write status */ |
| 274 | } |
| 275 | |
| 276 | static void spi_init_cb(void *unused) |
| 277 | { |
| 278 | struct spi_flash flash; |
| 279 | |
| 280 | spi_init(); |
| 281 | if (spi_flash_probe(0, 0, &flash)) { |
| 282 | printk(BIOS_DEBUG, "SPI flash failed initialization!\n"); |
| 283 | return; |
| 284 | } |
| 285 | printk(BIOS_DEBUG, "SPI flash successfully initialized\n"); |
| 286 | } |
| 287 | |
| 288 | BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL); |
| 289 | |
| 290 | const struct spi_ctrlr spi_driver = { |
| 291 | .xfer = xfer, |
| 292 | .max_xfer_size = 64, |
Lee Leahy | d935109 | 2017-05-24 13:23:26 -0700 | [diff] [blame] | 293 | }; |
| 294 | |
| 295 | const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { |
| 296 | { |
| 297 | .ctrlr = &spi_driver, |
| 298 | .bus_start = 0, |
| 299 | .bus_end = 0, |
| 300 | }, |
| 301 | }; |
| 302 | |
| 303 | const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map); |