Siyuan Wang | 3e32cc0 | 2013-07-09 17:16:20 +0800 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; version 2 of the License. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 18 | */ |
| 19 | |
| 20 | /* |
| 21 | * No includes in this file because it is included into northbridge.c. |
| 22 | */ |
| 23 | |
| 24 | struct dram_base_mask_t { |
| 25 | u32 base; //[47:27] at [28:8] |
| 26 | u32 mask; //[47:27] at [28:8] and enable at bit 0 |
| 27 | }; |
| 28 | |
| 29 | static struct dram_base_mask_t get_dram_base_mask(u32 nodeid) |
| 30 | { |
| 31 | device_t dev; |
| 32 | struct dram_base_mask_t d; |
| 33 | #if defined(__PRE_RAM__) |
| 34 | dev = PCI_DEV(CONFIG_CBB, CONFIG_CDB, 1); |
| 35 | #else |
| 36 | dev = __f1_dev[0]; |
| 37 | #endif // defined(__PRE_RAM__) |
| 38 | |
| 39 | u32 temp; |
| 40 | temp = pci_read_config32(dev, 0x44); //[39:24] at [31:16] |
| 41 | d.mask = (temp & 0xffff0000); // mask out DramMask [26:24] too |
| 42 | |
| 43 | temp = pci_read_config32(dev, 0x40); //[35:24] at [27:16] |
| 44 | d.mask |= (temp & 1); // read enable bit |
| 45 | |
| 46 | d.base = (temp & 0x0fff0000); // mask out DramBase [26:24) too |
| 47 | |
| 48 | return d; |
| 49 | } |
| 50 | |
| 51 | #if CONFIG_EXT_CONF_SUPPORT |
| 52 | static void set_addr_map_reg_4_6_in_one_node(u32 nodeid, u32 cfg_map_dest, |
| 53 | u32 busn_min, u32 busn_max, |
| 54 | u32 type) |
| 55 | { |
| 56 | device_t dev; |
| 57 | u32 i; |
| 58 | u32 tempreg; |
| 59 | u32 index_min, index_max; |
| 60 | u32 dest_min, dest_max; |
| 61 | index_min = busn_min>>2; dest_min = busn_min - (index_min<<2); |
| 62 | index_max = busn_max>>2; dest_max = busn_max - (index_max<<2); |
| 63 | |
| 64 | // three case: index_min==index_max, index_min+1=index_max; index_min+1<index_max |
| 65 | #if defined(__PRE_RAM__) |
| 66 | dev = NODE_PCI(nodeid, 1); |
| 67 | #else |
| 68 | dev = __f1_dev[nodeid]; |
| 69 | #endif // defined(__PRE_RAM__) |
| 70 | if(index_min== index_max) { |
| 71 | pci_write_config32(dev, 0x110, index_min | (type<<28)); |
| 72 | tempreg = pci_read_config32(dev, 0x114); |
| 73 | for(i=dest_min; i<=dest_max; i++) { |
| 74 | tempreg &= ~(0xff<<(i*8)); |
| 75 | tempreg |= (cfg_map_dest<<(i*8)); |
| 76 | } |
| 77 | pci_write_config32(dev, 0x110, index_min | (type<<28)); // do i need to write it again |
| 78 | pci_write_config32(dev, 0x114, tempreg); |
| 79 | } else if(index_min<index_max) { |
| 80 | pci_write_config32(dev, 0x110, index_min | (type<<28)); |
| 81 | tempreg = pci_read_config32(dev, 0x114); |
| 82 | for(i=dest_min; i<=3; i++) { |
| 83 | tempreg &= ~(0xff<<(i*8)); |
| 84 | tempreg |= (cfg_map_dest<<(i*8)); |
| 85 | } |
| 86 | pci_write_config32(dev, 0x110, index_min | (type<<28)); // do i need to write it again |
| 87 | pci_write_config32(dev, 0x114, tempreg); |
| 88 | |
| 89 | pci_write_config32(dev, 0x110, index_max | (type<<28)); |
| 90 | tempreg = pci_read_config32(dev, 0x114); |
| 91 | for(i=0; i<=dest_max; i++) { |
| 92 | tempreg &= ~(0xff<<(i*8)); |
| 93 | tempreg |= (cfg_map_dest<<(i*8)); |
| 94 | } |
| 95 | pci_write_config32(dev, 0x110, index_max | (type<<28)); // do i need to write it again |
| 96 | pci_write_config32(dev, 0x114, tempreg); |
| 97 | if((index_max-index_min)>1) { |
| 98 | tempreg = 0; |
| 99 | for(i=0; i<=3; i++) { |
| 100 | tempreg &= ~(0xff<<(i*8)); |
| 101 | tempreg |= (cfg_map_dest<<(i*8)); |
| 102 | } |
| 103 | for(i=index_min+1; i<index_max;i++) { |
| 104 | pci_write_config32(dev, 0x110, i | (type<<28)); |
| 105 | pci_write_config32(dev, 0x114, tempreg); |
| 106 | } |
| 107 | } |
| 108 | } |
| 109 | } |
| 110 | #endif // CONFIG_EXT_CONF_SUPPORT |
| 111 | |
| 112 | #if defined(__PRE_RAM__) |
| 113 | static void set_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index, |
| 114 | u32 io_min, u32 io_max, u32 nodes) |
| 115 | { |
| 116 | u32 i; |
| 117 | u32 tempreg; |
| 118 | device_t dev; |
| 119 | |
| 120 | #if CONFIG_EXT_CONF_SUPPORT |
| 121 | if(ht_c_index<4) { |
| 122 | #endif |
| 123 | /* io range allocation */ |
| 124 | tempreg = (nodeid&0xf) | ((nodeid & 0x30)<<(8-4)) | (linkn<<4) | ((io_max&0xf0)<<(12-4)); //limit |
| 125 | for(i=0; i<nodes; i++) { |
| 126 | dev = NODE_PCI(i, 1); |
| 127 | pci_write_config32(dev, 0xC4 + ht_c_index * 8, tempreg); |
| 128 | } |
| 129 | tempreg = 3 /*| ( 3<<4)*/ | ((io_min&0xf0)<<(12-4)); //base :ISA and VGA ? |
| 130 | for(i=0; i<nodes; i++){ |
| 131 | dev = NODE_PCI(i, 1); |
| 132 | pci_write_config32(dev, 0xC0 + ht_c_index * 8, tempreg); |
| 133 | } |
| 134 | #if CONFIG_EXT_CONF_SUPPORT |
| 135 | return; |
| 136 | } |
| 137 | |
| 138 | u32 cfg_map_dest; |
| 139 | u32 j; |
| 140 | |
| 141 | // if ht_c_index > 3, We should use extend space |
| 142 | |
| 143 | if(io_min>io_max) return; |
| 144 | |
| 145 | // for nodeid at first |
| 146 | cfg_map_dest = (1<<7) | (1<<6) | (linkn<<0); |
| 147 | |
| 148 | set_addr_map_reg_4_6_in_one_node(nodeid, cfg_map_dest, io_min, io_max, 4); |
| 149 | |
| 150 | // all other nodes |
| 151 | cfg_map_dest = (1<<7) | (0<<6) | (nodeid<<0); |
| 152 | for(j = 0; j< nodes; j++) { |
| 153 | if(j== nodeid) continue; |
| 154 | set_addr_map_reg_4_6_in_one_node(j,cfg_map_dest, io_min, io_max, 4); |
| 155 | } |
| 156 | #endif // CONFIG_EXT_CONF_SUPPORT |
| 157 | } |
| 158 | |
| 159 | static void clear_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index, |
| 160 | u32 io_min, u32 io_max, u32 nodes) |
| 161 | { |
| 162 | u32 i; |
| 163 | device_t dev; |
| 164 | #if CONFIG_EXT_CONF_SUPPORT |
| 165 | if(ht_c_index<4) { |
| 166 | #endif |
| 167 | /* io range allocation */ |
| 168 | for(i=0; i<nodes; i++) { |
| 169 | dev = NODE_PCI(i, 1); |
| 170 | pci_write_config32(dev, 0xC4 + ht_c_index * 8, 0); |
| 171 | pci_write_config32(dev, 0xC0 + ht_c_index * 8, 0); |
| 172 | } |
| 173 | #if CONFIG_EXT_CONF_SUPPORT |
| 174 | return; |
| 175 | } |
| 176 | // : if hc_c_index > 3, We should use io_min, io_max to clear extend space |
| 177 | u32 cfg_map_dest; |
| 178 | u32 j; |
| 179 | |
| 180 | // all nodes |
| 181 | cfg_map_dest = 0; |
| 182 | for(j = 0; j< nodes; j++) { |
| 183 | set_addr_map_reg_4_6_in_one_node(j,cfg_map_dest, io_min, io_max, 4); |
| 184 | } |
| 185 | #endif |
| 186 | } |
| 187 | #endif // defined(__PRE_RAM__) |
| 188 | |
| 189 | #if !defined(__PRE_RAM__) |
| 190 | static u32 get_io_addr_index(u32 nodeid, u32 linkn) |
| 191 | { |
| 192 | #if 0 |
| 193 | u32 index; |
| 194 | |
| 195 | for(index=0; index<256; index++) { |
| 196 | if((sysconf.conf_io_addrx[index+4] == 0)){ |
| 197 | sysconf.conf_io_addr[index+4] = (nodeid & 0x3f) ; |
| 198 | sysconf.conf_io_addrx[index+4] = 1 | ((linkn & 0x7)<<4); |
| 199 | return index; |
| 200 | } |
| 201 | } |
| 202 | #endif |
| 203 | return 0; |
| 204 | } |
| 205 | |
| 206 | static u32 get_mmio_addr_index(u32 nodeid, u32 linkn) |
| 207 | { |
| 208 | #if 0 |
| 209 | u32 index; |
| 210 | |
| 211 | for(index=0; index<64; index++) { |
| 212 | if((sysconf.conf_mmio_addrx[index+8] == 0)){ |
| 213 | sysconf.conf_mmio_addr[index+8] = (nodeid & 0x3f) ; |
| 214 | sysconf.conf_mmio_addrx[index+8] = 1 | ((linkn & 0x7)<<4); |
| 215 | return index; |
| 216 | } |
| 217 | } |
| 218 | #endif |
| 219 | |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg, |
| 224 | u32 io_min, u32 io_max) |
| 225 | { |
| 226 | |
| 227 | u32 tempreg; |
| 228 | #if CONFIG_EXT_CONF_SUPPORT |
| 229 | if(reg!=0x110) { |
| 230 | #endif |
| 231 | /* io range allocation */ |
| 232 | tempreg = (nodeid&0xf) | ((nodeid & 0x30)<<(8-4)) | (linkn<<4) | ((io_max&0xf0)<<(12-4)); //limit |
| 233 | pci_write_config32(__f1_dev[0], reg+4, tempreg); |
| 234 | |
| 235 | tempreg = 3 /*| ( 3<<4)*/ | ((io_min&0xf0)<<(12-4)); //base :ISA and VGA ? |
| 236 | #if 0 |
| 237 | // FIXME: can we use VGA reg instead? |
| 238 | if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { |
| 239 | printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link %s\n", |
| 240 | __func__, dev_path(dev), link); |
| 241 | tempreg |= PCI_IO_BASE_VGA_EN; |
| 242 | } |
| 243 | if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) { |
| 244 | tempreg |= PCI_IO_BASE_NO_ISA; |
| 245 | } |
| 246 | #endif |
| 247 | pci_write_config32(__f1_dev[0], reg, tempreg); |
| 248 | #if CONFIG_EXT_CONF_SUPPORT |
| 249 | return; |
| 250 | } |
| 251 | |
| 252 | u32 cfg_map_dest; |
| 253 | u32 j; |
| 254 | // if ht_c_index > 3, We should use extend space |
| 255 | if(io_min>io_max) return; |
| 256 | // for nodeid at first |
| 257 | cfg_map_dest = (1<<7) | (1<<6) | (linkn<<0); |
| 258 | |
| 259 | set_addr_map_reg_4_6_in_one_node(nodeid, cfg_map_dest, io_min, io_max, 4); |
| 260 | #endif // CONFIG_EXT_CONF_SUPPORT |
| 261 | } |
| 262 | |
| 263 | static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmio_min, u32 mmio_max, u32 nodes) |
| 264 | { |
| 265 | |
| 266 | u32 tempreg; |
| 267 | #if CONFIG_EXT_CONF_SUPPORT |
| 268 | if(reg!=0x110) { |
| 269 | #endif |
| 270 | /* io range allocation */ |
| 271 | tempreg = (nodeid&0xf) | (linkn<<4) | (mmio_max&0xffffff00); //limit |
| 272 | pci_write_config32(__f1_dev[0], reg+4, tempreg); |
| 273 | tempreg = 3 | (nodeid & 0x30) | (mmio_min&0xffffff00); |
| 274 | pci_write_config32(__f1_dev[0], reg, tempreg); |
| 275 | #if CONFIG_EXT_CONF_SUPPORT |
| 276 | return; |
| 277 | } |
| 278 | |
| 279 | device_t dev; |
| 280 | u32 j; |
| 281 | // if ht_c_index > 3, We should use extend space |
| 282 | // for nodeid at first |
| 283 | u32 enable; |
| 284 | |
| 285 | if(mmio_min>mmio_max) { |
| 286 | return; |
| 287 | } |
| 288 | |
| 289 | enable = 1; |
| 290 | |
| 291 | dev = __f1_dev[nodeid]; |
| 292 | tempreg = ((mmio_min>>3) & 0x1fffff00)| (1<<6) | (linkn<<0); |
| 293 | pci_write_config32(dev, 0x110, index | (2<<28)); |
| 294 | pci_write_config32(dev, 0x114, tempreg); |
| 295 | |
| 296 | tempreg = ((mmio_max>>3) & 0x1fffff00) | enable; |
| 297 | pci_write_config32(dev, 0x110, index | (3<<28)); |
| 298 | pci_write_config32(dev, 0x114, tempreg); |
| 299 | #endif // CONFIG_EXT_CONF_SUPPORT |
| 300 | } |
| 301 | |
| 302 | #endif // !defined(__PRE_RAM__) |