Merge sandy/ivybridge romstage flow for MRC and non-MRC.
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13656
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/mainboard/intel/emeraldlake2/gpio.h b/src/mainboard/intel/emeraldlake2/gpio.h
index 81bccdf..37b2430 100644
--- a/src/mainboard/intel/emeraldlake2/gpio.h
+++ b/src/mainboard/intel/emeraldlake2/gpio.h
@@ -80,7 +80,7 @@
const struct pch_gpio_set3 pch_gpio_set3_level = {
};
-const struct pch_gpio_map emeraldlake2_gpio_map = {
+const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c
index 5cf24b2..145526a 100644
--- a/src/mainboard/intel/emeraldlake2/romstage.c
+++ b/src/mainboard/intel/emeraldlake2/romstage.c
@@ -32,7 +32,6 @@
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/bd82x6x/gpio.h>
#include <arch/cpu.h>
-#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include <halt.h>
#include <tpm.h>
@@ -40,7 +39,7 @@
#define SIO_PORT 0x164e
-static void pch_enable_lpc(void)
+void pch_enable_lpc(void)
{
device_t dev = PCH_LPC_DEV;
@@ -64,7 +63,7 @@
}
}
-static void rcba_config(void)
+void rcba_config(void)
{
u32 reg32;
@@ -76,19 +75,7 @@
RCBA32(FD) = reg32;
}
-// FIXME, this function is generic code that should go to sb/... or
-// nb/../early_init.c
-static void early_pch_init(void)
-{
- u8 reg8;
-
- // reset rtc power status
- reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4);
- reg8 &= ~(1 << 2);
- pci_write_config8(PCH_LPC_DEV, 0xa4, reg8);
-}
-
-static void setup_sio_gpios(void)
+void mainboard_config_superio(void)
{
const u16 port = SIO_PORT;
const u16 runtime_port = 0x180;
@@ -121,13 +108,9 @@
outb(0xaa, port);
}
-#include <cpu/intel/romstage.h>
-void main(unsigned long bist)
+void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- int boot_mode = 0;
- int cbmem_was_initted;
-
- struct pei_data pei_data = {
+ struct pei_data pei_data_template = {
.pei_version = PEI_VERSION,
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
@@ -170,86 +153,14 @@
{ 1, 5, 0x0040 }, /* P13: Back port (OC5) */
},
};
+ *pei_data = pei_data_template;
+}
- timestamp_init(get_initial_timestamp());
- timestamp_add_now(TS_START_ROMSTAGE);
+void mainboard_early_init(int s3resume)
+{
+}
- if (bist == 0)
- enable_lapic();
-
- pch_enable_lpc();
-
- /* Enable GPIOs */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1);
- pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
- setup_pch_gpios(&emeraldlake2_gpio_map);
- setup_sio_gpios();
-
- /* Early SuperIO setup */
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected\n");
- boot_mode = 1;
-
- /* System is not happy after keyboard reset... */
- printk(BIOS_DEBUG, "Issuing CF9 warm reset\n");
- outb(0x6, 0xcf9);
- halt();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- sandybridge_early_initialization(SANDYBRIDGE_MOBILE);
- printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n");
-
- boot_mode = southbridge_detect_s3_resume() ? 2 : 0;
-
- post_code(0x38);
- /* Enable SPD ROMs and DDR-III DRAM */
- enable_smbus();
-
- /* Prepare USB controller early in S3 resume */
- if (boot_mode == 2)
- enable_usb_bar();
-
- post_code(0x3a);
- pei_data.boot_mode = boot_mode;
- timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(&pei_data);
-
- timestamp_add_now(TS_AFTER_INITRAM);
- post_code(0x3b);
- /* Perform some initialization that must run before stage2 */
- early_pch_init();
- post_code(0x3c);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
- post_code(0x3d);
-
- quick_ram_check();
- post_code(0x3e);
-
- cbmem_was_initted = !cbmem_recovery(boot_mode==2);
- if (boot_mode!=2)
- save_mrc_data(&pei_data);
-
- if (boot_mode==2 && !cbmem_was_initted) {
- /* Failed S3 resume, reset to come up cleanly */
- outb(0x6, 0xcf9);
- halt();
- }
- northbridge_romstage_finalize(boot_mode==2);
-
- post_code(0x3f);
- if (CONFIG_LPC_TPM) {
- init_tpm(boot_mode == 2);
- }
+int mainboard_should_reset_usb(int s3resume)
+{
+ return !s3resume;
}