Merge sandy/ivybridge romstage flow for MRC and non-MRC.
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13656
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/mainboard/google/parrot/gpio.h b/src/mainboard/google/parrot/gpio.h
index 1cfd487..c3e3e2f 100644
--- a/src/mainboard/google/parrot/gpio.h
+++ b/src/mainboard/google/parrot/gpio.h
@@ -254,7 +254,7 @@
.gpio75 = GPIO_LEVEL_LOW,
};
-const struct pch_gpio_map parrot_gpio_map = {
+const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c
index 029805b..60c3f01 100644
--- a/src/mainboard/google/parrot/romstage.c
+++ b/src/mainboard/google/parrot/romstage.c
@@ -31,7 +31,6 @@
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/bd82x6x/gpio.h>
#include <arch/cpu.h>
-#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include <halt.h>
#include "gpio.h"
@@ -39,7 +38,7 @@
#include <tpm.h>
#include "ec/compal/ene932/ec.h"
-static void pch_enable_lpc(void)
+void pch_enable_lpc(void)
{
/* Parrot EC Decode Range Port60/64, Port62/66 */
/* Enable EC, PS/2 Keyboard/Mouse */
@@ -52,7 +51,7 @@
pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, (68 & ~3) | 0x00040001);
}
-static void rcba_config(void)
+void rcba_config(void)
{
u32 reg32;
@@ -107,13 +106,13 @@
RCBA32(FD) = reg32;
}
-#include <cpu/intel/romstage.h>
-void main(unsigned long bist)
+void mainboard_early_init(int s3resume)
{
- int boot_mode = 0;
- int cbmem_was_initted;
+}
- struct pei_data pei_data = {
+void mainboard_fill_pei_data(struct pei_data *pei_data)
+{
+ struct pei_data pei_data_template = {
.pei_version = PEI_VERSION,
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
@@ -158,81 +157,14 @@
{ 0, 4, 0x0000 }, /* P13: Empty */
},
};
+ *pei_data = pei_data_template;
+}
- timestamp_init(get_initial_timestamp());
- timestamp_add_now(TS_START_ROMSTAGE);
+void mainboard_config_superio(void)
+{
+}
- if (bist == 0)
- enable_lapic();
-
- pch_enable_lpc();
-
- /* Enable GPIOs */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1);
- pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
- setup_pch_gpios(&parrot_gpio_map);
-
- /* Initialize console device(s) */
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected\n");
- boot_mode = 1;
-
- /* System is not happy after keyboard reset... */
- printk(BIOS_DEBUG, "Issuing CF9 warm reset\n");
- outb(0x6, 0xcf9);
- halt();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- sandybridge_early_initialization(SANDYBRIDGE_MOBILE);
- printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n");
-
- boot_mode = southbridge_detect_s3_resume() ? 2 : 0;
-
- post_code(0x38);
- /* Enable SPD ROMs and DDR-III DRAM */
- enable_smbus();
-
- /* Prepare USB controller early in S3 resume */
- if (boot_mode == 2)
- enable_usb_bar();
-
- post_code(0x39);
-
- post_code(0x3a);
- pei_data.boot_mode = boot_mode;
- timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(&pei_data);
-
- timestamp_add_now(TS_AFTER_INITRAM);
- post_code(0x3c);
-
- rcba_config();
- post_code(0x3d);
-
- quick_ram_check();
- post_code(0x3e);
-
- cbmem_was_initted = !cbmem_recovery(boot_mode==2);
- if (boot_mode!=2)
- save_mrc_data(&pei_data);
-
- if (boot_mode==2 && !cbmem_was_initted) {
- /* Failed S3 resume, reset to come up cleanly */
- outb(0x6, 0xcf9);
- halt();
- }
- northbridge_romstage_finalize(boot_mode==2);
-
- post_code(0x3f);
- if (CONFIG_LPC_TPM) {
- init_tpm(boot_mode == 2);
- }
+int mainboard_should_reset_usb(int s3resume)
+{
+ return !s3resume;
}