diff --git a/src/mainboard/google/brya/variants/anraggar/gpio.c b/src/mainboard/google/brya/variants/anraggar/gpio.c
index cdbb72f..b01bc2c 100644
--- a/src/mainboard/google/brya/variants/anraggar/gpio.c
+++ b/src/mainboard/google/brya/variants/anraggar/gpio.c
@@ -32,7 +32,7 @@
 	/* D8  : SRCCLKREQ3# ==> SD_CLKREQ_ODL ==> NC */
 	PAD_NC_LOCK(GPP_D8, NONE, LOCK_CONFIG),
 	/* D13 : NC ==> EN_PP1800_WCAM_X */
-	PAD_CFG_GPO_LOCK(GPP_D13, 0, LOCK_CONFIG),
+	PAD_CFG_GPO_LOCK(GPP_D13, 1, LOCK_CONFIG),
 
 	/* E20 : DDP2_CTRLCLK ==> HDMI_DDC_SCL ==> NC */
 	PAD_NC_LOCK(GPP_E20, NONE, LOCK_CONFIG),
@@ -48,7 +48,7 @@
 	PAD_CFG_GPO_LOCK(GPP_F11, 1, LOCK_CONFIG),
 	/* F12 : GSXDOUT ==> WWAN_RST_L */
 	PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
-	/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD ==> EN_PP2800_AVDD*/
+	/* F18 : THC1_SPI2_INT# ==> EN_PP2800_AFVDD */
 	PAD_CFG_GPO(GPP_F18, 0, DEEP),
 	/* F23 : V1P05_CTRL ==> V1P05EXT_CTRL ==> NC*/
 	PAD_NC_LOCK(GPP_F23, NONE, LOCK_CONFIG),
diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb
index defb8e6..30c3c1b 100644
--- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb
+++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb
@@ -207,7 +207,7 @@
 				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
 
 				register "cio2_num_ports" = "1"
-				register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
+				register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used
 				register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
 				register "cio2_prt[0]" = "1"
 				device generic 0 on end
@@ -244,18 +244,17 @@
 		end
 		device ref i2c2 on
 			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""OVTI5675""
+				register "acpi_hid" = ""OVTIDB10""
 				register "acpi_uid" = "0"
 				register "acpi_name" = ""CAM0""
-				register "chip_name" = ""Ov 5675 Camera""
+				register "chip_name" = ""Ov 13b10 Camera""
 				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
 
-				register "ssdb.lanes_used" = "2"
-				register "ssdb.link_used" = "1"
+				register "ssdb.lanes_used" = "4"
 				register "ssdb.vcm_type" = "0x0C"
 				register "vcm_name" = ""VCM0""
 				register "num_freq_entries" = "1"
-				register "link_freq[0]" = "DEFAULT_LINK_FREQ"
+				register "link_freq[0]" = "560 * MHz"
 				register "remote_name" = ""IPU0""
 
 				register "has_power_resource" = "1"
@@ -263,17 +262,16 @@
 				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
 				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
 
-				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
-				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_F18"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1200_WCAM_X
 				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3"   # WCAM_RST_L
 
 				#_ON
-				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops_cnt" = "4"
 				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
 				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
 				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
-				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
 
 				#_OFF
 				register "off_seq.ops_cnt" = "4"
@@ -285,30 +283,38 @@
 				device i2c 36 on end
 			end
 			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "3"
+				register "acpi_uid" = "2"
 				register "acpi_name" = ""VCM0""
-				register "chip_name" = ""DW AF DAC""
+				register "chip_name" = ""DW9714 VCM ""
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
 				register "vcm_compat" = ""dongwoon,dw9714""
 
+				register "has_power_resource" = "1"
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_AFVDD
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 0C on end
 			end
 			chip drivers/intel/mipi_camera
-				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
 				register "acpi_uid" = "1"
 				register "acpi_name" = ""NVM0""
-				register "chip_name" = ""GT24C08""
+				register "chip_name" = ""GT24P64E""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
-
 				register "nvm_size" = "0x2000"
 				register "nvm_pagesize" = "1"
 				register "nvm_readonly" = "1"
 				register "nvm_width" = "0x10"
-				register "nvm_compat" = ""atmel,24c08""
+				register "nvm_compat" = ""atmel,24c64""
 
 				device i2c 50 on end
 			end