Documentation: x86 add sleep state and minimal memory setup
Document how to add the sleep state and minimal memory setup.
TEST=None
Change-Id: Ibebeef34269dbf2366f1bea6d734f6bade4e4028
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13446
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html
index d50ff4e..47d3295 100644
--- a/Documentation/Intel/Board/board.html
+++ b/Documentation/Intel/Board/board.html
@@ -15,6 +15,7 @@
<ol>
<li><a href="#RequiredFiles">Required Files</a></li>
<li>Enable <a href="#SerialOutput">Serial Output</a></li>
+ <li>Load the <a href="#SpdData">Memory Timing Data</a></li>
</ol>
@@ -101,6 +102,84 @@
</ol>
+<hr>
+<h1><a name="SpdData">Memory Timing Data</a></h1>
+<p>
+ Memory timing data is located in the flash. This data is in the format of
+ <a target="_blank" href="https://en.wikipedia.org/wiki/Serial_presence_detect">serial presence detect</a>
+ (SPD) data.
+ Use the following steps to load the SPD data:
+</p>
+<ol>
+ <li>Edit Kconfig to add the DISPLAY_SPD_DATA" value which enables the
+ display of the SPD data being passed to MemoryInit
+ </li>
+ <li>Create an "spd" subdirectory</li>
+ <li>Create an spd/spd.c file for the SPD implementation
+ <ol type="A">
+ <li>Implement the mainboard_fill_spd_data routine
+ <ol type="i">
+ <li>Read the SPD data either from the spd.bin file or using I2C or SMBUS</li>
+ <li>Fill in the pei_data structure with SPD data for each of the DIMMs</li>
+ <li>Set the DIMM channel configuration</li>
+ </ol>
+ </li>
+ </ol>
+ </li>
+ <li>Add an .spd.hex file containing the memory timing data to the spd subdirectory</li>
+ <li>Create spd/Makefile.inc
+ <ol type="A">
+ <li>Add spd.c to romstage</li>
+ <li>Add the .spd.hex file to SPD_SOURCES</li>
+ </ol>
+ </li>
+ <li>Edit Makefile.inc to add the spd subdirectory</li>
+ <li>Edit romstage.c
+ <ol type="A">
+ <li>Call mainboard_fill_spd_data</li>
+ <li>Add mainboard_memory_init_params to copy the SPD and DRAM
+ configuration data from the pei_data structure into the UPDs
+ for MemoryInit
+ </li>
+ </ol>
+ </li>
+ <li>Edit devicetree.cb
+ <ol type="A">
+ <li>Include the UPD parameters for MemoryInit except for:
+ <ul>
+ <li>Address of SPD data</li>
+ <li>DRAM configuration set above</li>
+ </ul>
+ </li>
+ </ol>
+ </li>
+ <li>A working FSP
+ <a target="_blank" href="../fsp1_1.html#MemoryInit">MemoryInit</a>
+ routine is required to complete debugging</li>
+ <li>Debug the result until port 0x80 outputs
+ <ol type="A">
+ <li>0x34:
+ - Just after entering
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a>
+ </li>
+ <li>0x36:
+ - Just before displaying the
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l106">UPD parameters</a>
+ for FSP MemoryInit
+ </li>
+ <li>0x92: <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l219">POST_FSP_MEMORY_INIT</a>
+ - Just before calling FSP
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l125">MemoryInit</a>
+ </li>
+ <li>0x37:
+ - Just after returning from FSP
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l127">MemoryInit</a>
+ </li>
+ </ol>
+ </li>
+ <li>Continue debugging with CONFIG_DISPLAY_HOBS enabled until TempRamExit is called</li>
+</ol>
+
<hr>
<p>Modified: 31 January 2016</p>
diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html
index 0b0615d..b5daac8 100644
--- a/Documentation/Intel/SoC/soc.html
+++ b/Documentation/Intel/SoC/soc.html
@@ -22,6 +22,8 @@
<li><a href="#Romstage">Romstage</a>
<ol type="A">
<li>Enable <a href="#SerialOutput">Serial Output"</a></li>
+ <li>Get the <a href="#PreviousSleepState">Previous Sleep State</a></li>
+ <li>Add the <a href="#MemoryInit">MemoryInit</a> Support</li>
</ol>
</li>
</ol>
@@ -328,6 +330,57 @@
</ol>
+<h2><a name="PreviousSleepState">Determine Previous Sleep State</a></h2>
+<p>
+ The following steps implement the code to get the previous sleep state:
+</p>
+<ol>
+ <li>Implement the fill_power_state routine which determines the previous sleep state</li>
+ <li>Debug the result until port 0x80 outputs
+ <ol type="A">
+ <li>0x32:
+ - Just after entering
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l99">romstage_common</a>
+ </li>
+ <li>0x33 - Just after calling
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l113">soc_pre_ram_init</a>
+ </li>
+ <li>0x34:
+ - Just after entering
+ <a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a>
+ </li>
+ </ol>
+</ol>
+
+
+<h2><a name="MemoryInit">MemoryInit Support</a></h2>
+<p>
+ The following steps implement the code to support the FSP MemoryInit call:
+</p>
+<ol>
+ <li>Add the chip.h header file to define the UPD values which get passed
+ to MemoryInit. Skip the values containing SPD addresses and DRAM
+ configuration data which is determined by the board.
+ <p>
+ <b>Build Note</b>: The src/mainboard/<Vendor>/<Board>/devicetree.cb
+ file specifies the default values for these parameters. The build
+ process creates the static.c module which contains the config data
+ structure containing these values.
+ </p>
+ </li>
+ <li>Edit romstage/romstage.c
+ <ol type="A">
+ <li>Implement the romstage/romstage.c/soc_memory_init_params routine to
+ copy the values from the config structure into the UPD structure
+ </li>
+ <li>Implement the soc_display_memory_init_params routine to display
+ the updated UPD parameters by calling fsp_display_upd_value
+ </li>
+ </ol>
+ </li>
+</ol>
+
+
<hr>
<p>Modified: 31 January 2016</p>
</body>
diff --git a/Documentation/Intel/development.html b/Documentation/Intel/development.html
index b90fa965..0cd2bd5 100644
--- a/Documentation/Intel/development.html
+++ b/Documentation/Intel/development.html
@@ -82,6 +82,18 @@
</ol>
</li>
<li>Enable <a target="_blank" href="fsp1_1.html#corebootFspDebugging">coreboot/FSP</a> debugging</li>
+ <li>Determine the <a target="_blank" href="SoC/soc.html#PreviousSleepState">Previous Sleep State</a></li>
+ <li>Enable DRAM:
+ <ol type="A">
+ <li>Implement the SoC
+ <a target="_blank" href="SoC/soc.html#MemoryInit">MemoryInit</a>
+ Support
+ </li>
+ <li>Implement the board support to read the
+ <a target="_blank" href="Board/board.html#SpdData">Memory Timing Data</a>
+ </li>
+ </ol>
+ </li>
</ol>
@@ -125,6 +137,32 @@
<th>Testing</th>
</tr>
<tr>
+ <td>DRAM</td>
+ <td>
+ Load SPD data: src/soc/mainboard/<Vendor>/<Board>/spd/<a target="_blank" href="Board/board.html#SpdData">spd.c</a><br>
+ UPD Setup:
+ <ul>
+ <li>src/soc<Vendor>//<Chip Family>/romstage/<a target="_blank" href="SoC/soc.html#MemoryInit">romstage.c</a></li>
+ <li>src/mainboard/<Vendor>/<Board>/<a target="_blank" href="Board/board.html#SpdData">romstage.c</a></li>
+ </ul>
+ FSP 1.1 MemoryInit called from src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l126">raminit.c</a>
+ </td>
+ <td>Select the following Kconfig values
+ <ul>
+ <li>DISPLAY_HOBS</li>
+ <li>DISPLAY_UPD_DATA</li>
+ </ul>
+ Testing successful if:
+ <ul>
+ <li>MemoryInit UPD values are correct</li>
+ <li>MemoryInit returns 0 (success) and</li>
+ <li>The the message "ERROR - coreboot's requirements not met by FSP binary!"
+ is not displayed
+ </li>
+ </ul>
+ </td>
+ </tr>
+ <tr>
<td>Serial Port</td>
<td>
SoC <a target="_blank" href="SoC/soc.html#SerialOutput">Support</a><br>
@@ -150,6 +188,26 @@
is displayed<br>
</td>
</tr>
+ <tr>
+ <td>MemoryInit</td>
+ <td><a target="_blank" href="SoC/soc.html#MemoryInit">SoC</a> support<br>
+ <a target="_blank" href="Board/board.html#SpdData">Board</a> support<br>
+ </td>
+ <td>Select the following Kconfig values
+ <ul>
+ <li>DISPLAY_HOBS</li>
+ <li>DISPLAY_UPD_DATA</li>
+ </ul>
+ Testing successful if:
+ <ul>
+ <li>MemoryInit UPD values are correct</li>
+ <li>MemoryInit returns 0 (success) and</li>
+ <li>The the message "ERROR - coreboot's requirements not met by FSP binary!"
+ is not displayed
+ </li>
+ </ul>
+ </td>
+ </tr>
</table>