mainboard/hp: Add initial support for Pavilion m6-1035dx
This was a pathetically easy port, where all the components are
already supported. This is basically a verbatim copy of amd/parmer.
The EC is an ENE KB932, which is a part that does surprisingly little
for an EC. This also means we need almost no code to get it working.
I've "select"ed the EC in Kconfig, which is the only difference from
parmer, although the keyboard worked fine without it.
I haven't coupled in the ACPI code from the EC yet, so battery level
is not readable from the OS. Hotkeys work except for brightness
control, and the CapsLock LED blinks at regular intervals instead of
following the CapsLock key.
Change-Id: Idfec6f848b99a52e73eac22d516f3550477ad822
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5409
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
diff --git a/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
new file mode 100644
index 0000000..110c2c8
--- /dev/null
+++ b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
@@ -0,0 +1,245 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+
+STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_ALLOCATE_BUFFER, fam15tn_AllocateBuffer },
+ {AGESA_DEALLOCATE_BUFFER, fam15tn_DeallocateBuffer },
+ {AGESA_DO_RESET, fam15tn_Reset },
+ {AGESA_LOCATE_BUFFER, fam15tn_LocateBuffer },
+ {AGESA_READ_SPD, fam15tn_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, fam15tn_DefaultRet },
+ {AGESA_RUNFUNC_ONAP, fam15tn_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, fam15tn_GetIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, fam15tn_HookBeforeDQSTraining },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15tn_HookBeforeExitSelfRefresh },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam15tn_HookGfxGetVbiosImage }
+};
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+ UINTN i;
+ AGESA_STATUS CalloutStatus;
+ UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
+
+ for (i = 0; i < CallOutCount; i++)
+ {
+ if (BiosCallouts[i].CalloutName == Func)
+ break;
+ }
+
+ if(i >= CallOutCount)
+ return AGESA_UNSUPPORTED;
+
+ CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+ return CalloutStatus;
+}
+
+/**
+ * AMD Parmer Platform ALC272 Verb Table
+ */
+static const CODEC_ENTRY Parmer_Alc272_VerbTbl[] = {
+ {0x11, 0x411111F0},
+ {0x12, 0x411111F0},
+ {0x13, 0x411111F0},
+ {0x14, 0x411111F0},
+ {0x15, 0x411111F0},
+ {0x16, 0x411111F0},
+ {0x17, 0x411111F0},
+ {0x18, 0x01a19840},
+ {0x19, 0x411111F0},
+ {0x1a, 0x01813030},
+ {0x1b, 0x411111F0},
+ {0x1d, 0x40130605},
+ {0x1e, 0x01441120},
+ {0x21, 0x01211010},
+ {0xff, 0xffffffff}
+};
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Parmer_Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+/* Parmer Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM failed to read the input temperture vi I2C,
+ * if other software switch the I2C switch by mistake or intention.
+ * We recommend to using IMC to control Fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ /* Enable IMC fan control. the recommand way */
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ imc_reg_init();
+
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
+
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+
+#else /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;
+
+ if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *) FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+ //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+#if CONFIG_HUDSON_LEGACY_FREE
+ FchParams_reset->LegacyFree = 1;
+#endif
+ } else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ /* Fan Control */
+ oem_fan_control(FchParams_env);
+
+ /* XHCI configuration */
+#if CONFIG_HUDSON_XHCI_ENABLE
+ FchParams_env->Usb.Xhci0Enable = TRUE;
+#else
+ FchParams_env->Usb.Xhci0Enable = FALSE;
+#endif
+ FchParams_env->Usb.Xhci1Enable = FALSE;
+
+ /* sata configuration */
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}