device/ddr2,ddr3: Rename and move a few things
In order for ddr2.h and ddr3.h to be included in the same file it
cannot have conflicting definitions, therefore rename a few things and
move some things to a common header.
Change-Id: I6056148872076048e055f1d20a60ac31afd7cde6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
diff --git a/src/device/dram/ddr2.c b/src/device/dram/ddr2.c
index 0117b93..eefb569 100644
--- a/src/device/dram/ddr2.c
+++ b/src/device/dram/ddr2.c
@@ -38,11 +38,11 @@
*
* @param type DIMM type. This is byte[20] of the SPD.
*/
-int spd_dimm_is_registered_ddr2(enum spd_dimm_type type)
+int spd_dimm_is_registered_ddr2(enum spd_dimm_type_ddr2 type)
{
- if ((type == SPD_DIMM_TYPE_RDIMM)
- || (type == SPD_DIMM_TYPE_72B_SO_RDIMM)
- || (type == SPD_DIMM_TYPE_MINI_RDIMM))
+ if ((type == SPD_DDR2_DIMM_TYPE_RDIMM)
+ || (type == SPD_DDR2_DIMM_TYPE_72B_SO_RDIMM)
+ || (type == SPD_DDR2_DIMM_TYPE_MINI_RDIMM))
return 1;
return 0;
@@ -297,7 +297,7 @@
* SPD_STATUS_INVALID_FIELD -- A field with an invalid value was
* detected.
*/
-int spd_decode_ddr2(struct dimm_attr_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2])
+int spd_decode_ddr2(struct dimm_attr_ddr2_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2])
{
u8 spd_size, cl, reg8;
u16 eeprom_size;
@@ -582,7 +582,7 @@
}
printram("\n");
- dimm->dimm_type = spd[20] & SPD_DIMM_TYPE_MASK;
+ dimm->dimm_type = spd[20] & SPD_DDR2_DIMM_TYPE_MASK;
printram(" Dimm type : %x\n", dimm->dimm_type);
dimm->flags.is_ecc = !!(spd[11] & 0x3);
@@ -648,7 +648,7 @@
*
* @param dimm pointer to already decoded @ref dimm_attr structure
*/
-void dram_print_spd_ddr2(const struct dimm_attr_st *dimm)
+void dram_print_spd_ddr2(const struct dimm_attr_ddr2_st *dimm)
{
char buf[32];
int i;
diff --git a/src/include/device/dram/common.h b/src/include/device/dram/common.h
new file mode 100644
index 0000000..47023704
--- /dev/null
+++ b/src/include/device/dram/common.h
@@ -0,0 +1,70 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Copyright (C) 2017 Patrick Rudolph <siro@das-labor.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DEVICE_DRAM_COMMON_H
+#define DEVICE_DRAM_COMMON_H
+
+/**
+ * \brief Convenience definitions for TCK values
+ *
+ * Different values for tCK, representing standard DDR3 frequencies.
+ * These values are in 1/256 ns units.
+ * @{
+ */
+#define NS2MHZ_DIV256 (1000 << 8)
+
+#define TCK_1333MHZ 192
+#define TCK_1200MHZ 212
+#define TCK_1100MHZ 232
+#define TCK_1066MHZ 240
+#define TCK_1000MHZ 256
+#define TCK_933MHZ 274
+#define TCK_900MHZ 284
+#define TCK_800MHZ 320
+#define TCK_700MHZ 365
+#define TCK_666MHZ 384
+#define TCK_533MHZ 480
+#define TCK_400MHZ 640
+#define TCK_333MHZ 768
+#define TCK_266MHZ 960
+#define TCK_200MHZ 1280
+/** @} */
+
+/**
+ * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP
+ *
+ * Use this macro instead of printk(); for verbose RAM initialization messages.
+ * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically
+ * disabled.
+ * @{
+ */
+#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
+#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__)
+#else
+#define printram(x, ...)
+#endif
+/** @} */
+
+/** Result of the SPD decoding process */
+enum spd_status {
+ SPD_STATUS_OK = 0,
+ SPD_STATUS_INVALID,
+ SPD_STATUS_CRC_ERROR,
+ SPD_STATUS_INVALID_FIELD,
+};
+
+#endif /* DEVICE_DRAM_COMMON_H */
diff --git a/src/include/device/dram/ddr2.h b/src/include/device/dram/ddr2.h
index 7322b12..4aad1bc 100644
--- a/src/include/device/dram/ddr2.h
+++ b/src/include/device/dram/ddr2.h
@@ -30,55 +30,24 @@
#include <stdint.h>
#include <spd.h>
-
-/**
- * \brief Convenience definitions for TCK values
- *
- * Different values for tCK, representing standard DDR2 frequencies.
- * These values are in 1/256 ns units.
- * @{
- */
-#define TCK_800MHZ 320
-#define TCK_700MHZ 365
-#define TCK_666MHZ 384
-#define TCK_533MHZ 480
-#define TCK_400MHZ 640
-#define TCK_333MHZ 768
-#define TCK_266MHZ 960
-#define TCK_200MHZ 1280
-/** @} */
-
-/**
- * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP
- *
- * Use this macro instead of printk(); for verbose RAM initialization messages.
- * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically
- * disabled.
- * @{
- */
-#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
-#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__)
-#else
-#define printram(x, ...)
-#endif
-/** @} */
+#include <device/dram/common.h>
/*
* Module type (byte 20, bits 5:0) of SPD
* This definition is specific to DDR2. DDR3 SPDs have a different structure.
*/
-enum spd_dimm_type {
- SPD_DIMM_TYPE_UNDEFINED = 0x00,
- SPD_DIMM_TYPE_RDIMM = 0x01,
- SPD_DIMM_TYPE_UDIMM = 0x02,
- SPD_DIMM_TYPE_SO_DIMM = 0x04,
- SPD_DIMM_TYPE_72B_SO_CDIMM = 0x06,
- SPD_DIMM_TYPE_72B_SO_RDIMM = 0x07,
- SPD_DIMM_TYPE_MICRO_DIMM = 0x08,
- SPD_DIMM_TYPE_MINI_RDIMM = 0x10,
- SPD_DIMM_TYPE_MINI_UDIMM = 0x20,
+enum spd_dimm_type_ddr2 {
+ SPD_DDR2_DIMM_TYPE_UNDEFINED = 0x00,
+ SPD_DDR2_DIMM_TYPE_RDIMM = 0x01,
+ SPD_DDR2_DIMM_TYPE_UDIMM = 0x02,
+ SPD_DDR2_DIMM_TYPE_SO_DIMM = 0x04,
+ SPD_DDR2_DIMM_TYPE_72B_SO_CDIMM = 0x06,
+ SPD_DDR2_DIMM_TYPE_72B_SO_RDIMM = 0x07,
+ SPD_DDR2_DIMM_TYPE_MICRO_DIMM = 0x08,
+ SPD_DDR2_DIMM_TYPE_MINI_RDIMM = 0x10,
+ SPD_DDR2_DIMM_TYPE_MINI_UDIMM = 0x20,
/* Masks to bits 5:0 to give the dimm type */
- SPD_DIMM_TYPE_MASK = 0x3f,
+ SPD_DDR2_DIMM_TYPE_MASK = 0x3f,
};
/**
@@ -86,7 +55,7 @@
*
* Characteristic flags for the DIMM, as presented by the SPD
*/
-union dimm_flags_st {
+union dimm_flags_ddr2_st {
/* The whole point of the union/struct construct is to allow us to clear
* all the bits with one line: flags.raw = 0.
* We do not care how these bits are ordered */
@@ -130,9 +99,9 @@
*
* The characteristics of each DIMM, as presented by the SPD
*/
-struct dimm_attr_st {
+struct dimm_attr_ddr2_st {
enum spd_memory_type dram_type;
- enum spd_dimm_type dimm_type;
+ enum spd_dimm_type_ddr2 dimm_type;
/* BCD SPD revision */
u8 rev;
/* Supported CAS mask, bit 0 == CL0 .. bit7 == CL7 */
@@ -144,7 +113,7 @@
* Fields 0 and 1 are unused. */
u32 access_time[8];
/* Flags extracted from SPD */
- union dimm_flags_st flags;
+ union dimm_flags_ddr2_st flags;
/* Number of banks */
u8 banks;
/* SDRAM width */
@@ -199,23 +168,15 @@
u32 serial;
};
-/** Result of the SPD decoding process */
-enum spd_status {
- SPD_STATUS_OK = 0,
- SPD_STATUS_INVALID,
- SPD_STATUS_CRC_ERROR,
- SPD_STATUS_INVALID_FIELD,
-};
-
/** Maximum SPD size supported */
#define SPD_SIZE_MAX_DDR2 128
-int spd_dimm_is_registered_ddr2(enum spd_dimm_type type);
+int spd_dimm_is_registered_ddr2(enum spd_dimm_type_ddr2 type);
u8 spd_ddr2_calc_checksum(u8 *spd, int len);
u32 spd_decode_spd_size_ddr2(u8 byte0);
u32 spd_decode_eeprom_size_ddr2(u8 byte1);
-int spd_decode_ddr2(struct dimm_attr_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2]);
-void dram_print_spd_ddr2(const struct dimm_attr_st *dimm);
+int spd_decode_ddr2(struct dimm_attr_ddr2_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2]);
+void dram_print_spd_ddr2(const struct dimm_attr_ddr2_st *dimm);
void normalize_tck(u32 *tclk);
u8 spd_get_msbs(u8 c);
diff --git a/src/include/device/dram/ddr3.h b/src/include/device/dram/ddr3.h
index 2cfd6ac..0756095 100644
--- a/src/include/device/dram/ddr3.h
+++ b/src/include/device/dram/ddr3.h
@@ -31,6 +31,8 @@
#include <stdint.h>
#include <spd.h>
+#include <device/dram/common.h>
+
/**
* Convenience definitions for SPD offsets
@@ -46,32 +48,6 @@
/** @} */
/**
- * \brief Convenience definitions for TCK values
- *
- * Different values for tCK, representing standard DDR3 frequencies.
- * These values are in 1/256 ns units.
- * @{
- */
-#define NS2MHZ_DIV256 (1000 << 8)
-
-#define TCK_1333MHZ 192
-#define TCK_1200MHZ 212
-#define TCK_1100MHZ 232
-#define TCK_1066MHZ 240
-#define TCK_1000MHZ 256
-#define TCK_933MHZ 274
-#define TCK_900MHZ 284
-#define TCK_800MHZ 320
-#define TCK_700MHZ 365
-#define TCK_666MHZ 384
-#define TCK_533MHZ 480
-#define TCK_400MHZ 640
-#define TCK_333MHZ 768
-#define TCK_266MHZ 960
-#define TCK_200MHZ 1280
-/** @} */
-
-/**
* \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP
*
* Use this macro instead of printk(); for verbose RAM initialization messages.
@@ -198,14 +174,6 @@
u8 part_number[17];
} dimm_attr;
-/** Result of the SPD decoding process */
-enum spd_status {
- SPD_STATUS_OK = 0,
- SPD_STATUS_INVALID,
- SPD_STATUS_CRC_ERROR,
- SPD_STATUS_INVALID_FIELD,
-};
-
enum ddr3_xmp_profile {
DDR3_XMP_PROFILE_1 = 0,
DDR3_XMP_PROFILE_2 = 1,
diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c
index b350b67..b2348f5 100644
--- a/src/northbridge/intel/i945/raminit.c
+++ b/src/northbridge/intel/i945/raminit.c
@@ -362,7 +362,7 @@
for (i = 0; i < (2 * DIMM_SOCKETS); i++) {
int device = get_dimm_spd_address(sysinfo, i), bytes_read;
- struct dimm_attr_st dimm_info;
+ struct dimm_attr_ddr2_st dimm_info;
/* Initialize the socket information with a sane value */
sysinfo->dimm[i] = SYSINFO_DIMM_NOT_POPULATED;
diff --git a/src/northbridge/intel/x4x/raminit.c b/src/northbridge/intel/x4x/raminit.c
index cd786bb..7bb5f2b 100644
--- a/src/northbridge/intel/x4x/raminit.c
+++ b/src/northbridge/intel/x4x/raminit.c
@@ -119,7 +119,7 @@
static int ddr2_save_dimminfo(u8 dimm_idx, u8 *raw_spd,
struct abs_timings *saved_timings, struct sysinfo *s)
{
- struct dimm_attr_st decoded_dimm;
+ struct dimm_attr_ddr2_st decoded_dimm;
int i;
if (spd_decode_ddr2(&decoded_dimm, raw_spd) != SPD_STATUS_OK) {