src/cpu/amd/pi/00670F00/fixme.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <cpu/x86/mtrr.h>
#include <northbridge/amd/pi/agesawrapper.h>
#include "amdlib.h"

void amd_initcpuio(void)
{
	UINT64                        MsrReg;
	UINT32                        PciData;
	PCI_ADDR                      PciAddress;
	AMD_CONFIG_PARAMS             StdHeader;

	/* Enable legacy video routing: D18F1xF4 VGA Enable */
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4);
	PciData = 1;
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);

	/* The platform BIOS needs to ensure the memory ranges of SB800
	 * legacy devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and
	 * ACPI) are set to non-posted regions.
	 */
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84);
	/* last address before processor local APIC at FEE00000 */
	PciData = 0x00FEDF00;
	PciData |= 1 << 7;    /* set NP (non-posted) bit */
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80);
	/* lowest NP address is HPET at FED00000 */
	PciData = (0xFED00000 >> 8) | 3;
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);

	/* Map the remaining PCI hole as posted MMIO */
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C);
	PciData = 0x00FECF00; /* last address before non-posted range */
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
	LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
	MsrReg = (MsrReg >> 8) | 3;
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88);
	PciData = (UINT32)MsrReg;
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);

	/* Send all IO (0000-FFFF) to southbridge. */
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4);
	PciData = 0x0000F000;
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0);
	PciData = 0x00000003;
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
}

void amd_initmmio(void)
{
	UINT64                        MsrReg;
	UINT32                        PciData;
	PCI_ADDR                      PciAddress;
	AMD_CONFIG_PARAMS             StdHeader;

	/*
	  Set the MMIO Configuration Base Address and Bus Range onto MMIO
	  configuration base Address MSR register.
	*/
	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | \
		(LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
	LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);

	/* For serial port */
	PciData = 0xFF03FFD5;
	PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x14, 0x3, 0x44);
	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);

	/* Set ROM cache onto WP to decrease post time */
	MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
	LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader);
	MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | \
		0x800ull;
	LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);

	if (IS_ENABLED(CONFIG_UDELAY_LAPIC)){
		LibAmdMsrRead(0x1B, &MsrReg, &StdHeader);
		MsrReg |= 1 << 11;
		LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader);
	}
}