# SPDX-License-Identifier: GPL-2.0-only

# Gizmo2 has 1GB using 4 Micron_MT41J128M16JT-125 chips
# The datasheet is available at:
# http://download.micron.com/pdf/datasheets/dram/ddr3/2Gb_DDR3_SDRAM.pdf

#	SPD contents for Gizmo2 2GB DDR3 (1600MHz PC3-12800) soldered down

#	0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
#		bits[3:0]: 1 = 128 SPD Bytes Used
#		bits[6:4]: 1 = 256 SPD Bytes Total
#		bit7     : 0 = CRC covers bytes 0 ~ 125
11

#	1 SPD Revision -
#		0x10 = Revision 1.0
10

#	2 Key Byte / DRAM Device Type
#		bits[7:0]: 0x0b = DDR3 SDRAM
0B

#	3 Key Byte / Module Type
#		bits[3:0]: 3 = SO-DIMM
#		bits[7:4]:     reserved
03

#	4 SDRAM CHIP Density and Banks
#		bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
#		bits[6:4]: 0 = 3 (8 banks)
#		bit7     :     reserved
03

#	5 SDRAM Addressing
#		bits[2:0]: 1 = 10 Column Address Bits
#		bits[5:3]: 2 = 14 Row Address Bits
#		bits[7:6]:     reserved
11

#	6 Module Nominal Voltage, VDD
#		bit0     : 0 = 1.5 V operable
#		bit1     : 0 = NOT 1.35 V operable
#		bit2     : 0 = NOT 1.25 V operable
#		bits[7:3]:     reserved
00

#	7 Module Organization
#		bits[2:0]: 2 = 16 bits
#		bits[5:3]: 0 = 1 Rank
#		bits[7:6]:     reserved
02

#	8 Module Memory Bus Width
#		bits[2:0]: 3 = Primary bus width is 64 bits
#		bits[4:3]: 0 = 0 bits (no bus width extension)
#		bits[7:5]:     reserved
03

#	9 Fine Timebase (FTB) Dividend / Divisor
#		bits[3:0]: 0x02 divisor
#		bits[7:4]: 0x05 dividend
#		5/2 = 2.5ps
52

#	10 Medium Timebase (MTB) Dividend
#	11 Medium Timebase (MTB) Divisor
#		1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz
01 08

#	12 SDRAM Minimum Cycle Time (tCKmin)
#		0x0a  = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
0A

#	13 Reserved
00

#	14 CAS Latencies Supported, Least Significant Byte
#	15 CAS Latencies Supported, Most Significant Byte
#		Cas Latencies of 11 - 5 are supported
FE 00

#	16 Minimum CAS Latency Time (tAAmin)
#		0x6E = 13.75ns - DDR3-1600K
6E

#	17 Minimum Write Recovery Time (tWRmin)
#		0x78 = tWR of 15ns - All DDR3 speed grades
78

#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
#		0x6E = 13.75ns -  DDR3-1600K
6E

#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
#		0x3C = 7.5ns
3C

#	20 Minimum Row Precharge Delay Time (tRPmin)
#		0x6E = 13.75ns -  DDR3-1600K
6E

#	21 Upper Nibbles for tRAS and tRC
#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
11

#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
#		0x118 = 35ns - DDR3-1600 (see byte 21)
18

#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
#		0x186 = 48.75ns - DDR3-1600K
86

#	24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
#	25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
#		0x500 = 160ns - for 2 Gigabit chips
00 05

#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
3C

#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
#		0x3c =  7.5ns -  All DDR3 SDRAM speed bins
3C

#	28 Upper Nibble for tFAWmin
#	29 Minimum Four Activate Window Delay Time (tFAWmin)
#		0x0140 = 40ns -  DDR3-1600, 2 KB page size
01 40

#	30 SDRAM Optional Feature
#		bit0     : 1= RZQ/6 supported
#		bit1     : 1 = RZQ/7 supported
#		bits[6:2]:     reserved
#		bit7     : 1 = DLL Off mode supported
83

#	31 SDRAM Thermal and Refresh Options
#		bit0     : 1 = Temp up to 95c supported
#		bit1     : 0 = 85-95c uses 2x refresh rate
#		bit2     : 1 = Auto Self Refresh supported
#		bit3     : 0 = no on die thermal sensor
#		bits[6:4]:     reserved
#		bit7     : 0 = partial self refresh supported
05

#	32 Module Thermal Sensor
#		0 = Thermal sensor not incorporated onto this assembly
00

#	33 SDRAM Device Type
#		bits[1:0]: 0 = Signal Loading not specified
#		bits[3:2]:     reserved
#		bits[6:4]: 0 = Die count not specified
#		bit7     : 0 = Standard Monolithic DRAM Device
00

#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
00 00 00 00 00

#	39 - 59 (reserved)
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00

#	60 Raw Card Extension, Module Nominal Height
#		bits[4:0]: 0 = <= 15mm tall
#		bits[7:5]: 0 = raw card revision 0-3
00

#	61 Module Maximum Thickness
#		bits[3:0]: 0 = thickness front <= 1mm
#		bits[7:4]: 0 = thinkness back <= 1mm
00

#	62 Reference Raw Card Used
#		bits[4:0]: 0 = Reference Raw card A used
#		bits[6:5]: 0 = revision 0
#		bit7     : 0 = Reference raw cards A through AL
00

#	63 Address Mapping from Edge Connector to DRAM
#		bit0     : 0 = standard mapping (not mirrored)
#		bits[7:1]:     reserved
00

#	64 - 116 (reserved)
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00

#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
#		0x0001 = AMD
00 01

#	119 Module ID: Module Manufacturing Location - oem specified
#	120 Module ID: Module Manufacture Year in BCD
#		0x13 = 2013
00 13

#	121 Module ID: Module Manufacture week
#		0x12 = 12th week
12

#	122 - 125: Module Serial Number
53 41 47 45

#	126 - 127: Cyclical Redundancy Code
00 00