mb/google/volteer/variants: Describe USB ports in devicetree
Add the USB ports to the devicetree for describing them in ACPI,
including defining the port relationships and defining the reset
GPIO for the bluetooth device.
BUG=b:151731851
TEST=tested on volteer, all other boards were checked against the
latest available schematic.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ia1e5b71e7750a478ff79372c48616bbf5c21b79c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
diff --git a/src/mainboard/google/volteer/variants/elemi/overridetree.cb b/src/mainboard/google/volteer/variants/elemi/overridetree.cb
index 32204c5..31e1927 100644
--- a/src/mainboard/google/volteer/variants/elemi/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/elemi/overridetree.cb
@@ -1,6 +1,81 @@
chip soc/intel/tigerlake
device domain 0 on
+ device ref north_xhci on
+ chip drivers/usb/acpi
+ device ref tcss_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(4, 2)"
+ device ref tcss_usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C1 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(3, 2)"
+ device ref tcss_usb3_port2 on end
+ end
+ end
+ end
+ end
+ device ref south_xhci on
+ chip drivers/usb/acpi
+ device ref xhci_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device ref usb2_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A1 (DB)""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(2, 1)"
+ device ref usb2_port2 on
+ probe DB_USB USB3_ACTIVE
+ end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C1 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(3, 1)"
+ device ref usb2_port4 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port5 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(4, 1)"
+ device ref usb2_port9 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Bluetooth""
+ register "type" = "UPC_TYPE_INTERNAL"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
+ device ref usb2_port10 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device ref usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A1 (DB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(2, 2)"
+ device ref usb3_port2 on
+ probe DB_USB USB3_ACTIVE
+ end
+ end
+ end
+ end
+ end
end
end