diff --git a/src/mainboard/google/brya/variants/skolas/overridetree.cb b/src/mainboard/google/brya/variants/skolas/overridetree.cb
index 388ea4f..bb6d1ea 100644
--- a/src/mainboard/google/brya/variants/skolas/overridetree.cb
+++ b/src/mainboard/google/brya/variants/skolas/overridetree.cb
@@ -132,7 +132,7 @@
 				# TCP1 (DP-2) for port C1
 				register "device[3].name" = ""DD03""
 				register "device[3].use_pld" = "true"
-                                register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+				register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
 				# TCP2 (DP-3) for port C2
 				register "device[4].name" = ""DD04""
 				register "device[4].use_pld" = "true"
@@ -548,7 +548,9 @@
 				register "link_freq[1]" = "180 * MHz" # 180 MHz
 				register "remote_name" = ""IPU0""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
 				register "has_power_resource" = "1"
+
 				#Controls
 				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
 				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
@@ -582,9 +584,23 @@
 				register "chip_name" = ""DW9768 VCM""
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "vcm_compat" = ""dongwoon,dw9768""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 0C on
 					probe WFC WFC_MIPI_OVTI8856
 				end
@@ -595,7 +611,6 @@
 				register "chip_name" = ""AT24 EEPROM""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "nvm_compat" = ""atmel,24c1024""
 
 				register "nvm_size" = "0x2800"
@@ -603,6 +618,21 @@
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x10"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 58 on
 					probe WFC WFC_MIPI_OVTI8856
 				end
@@ -623,6 +653,8 @@
 				register "link_freq[1]" = "180 * MHz" # 180 MHz
 				register "remote_name" = ""IPU0""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
 				register "has_power_resource" = "1"
 				#Controls
 				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
@@ -657,9 +689,23 @@
 				register "chip_name" = ""DW AF DAC""
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "vcm_compat" = ""dongwoon,dw9714""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 0C on
 					probe WFC WFC_MIPI_KBAE350
 				end
@@ -670,7 +716,6 @@
 				register "chip_name" = ""GT24C08""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "nvm_compat" = ""atmel,24c08""
 
 				register "nvm_size" = "0x2000"
@@ -678,6 +723,21 @@
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x10"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 50 on
 					probe WFC WFC_MIPI_KBAE350
 				end
@@ -800,6 +860,7 @@
 				register "link_freq[0]" = "384 * MHz" # 384 MHz
 				register "link_freq[1]" = "96 * MHz" # 96 MHz
 				register "remote_name" = ""IPU0""
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
 
 				register "has_power_resource" = "1"
 				#Controls
@@ -834,7 +895,6 @@
 				register "chip_name" = ""GT24C16S""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC""
 				register "nvm_compat" = ""atmel,24c1024""
 
 				register "nvm_size" = "0x800"
@@ -842,6 +902,21 @@
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x08"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 50 on
 					probe UFC UFC_MIPI_IMX208
 				end