mb/superio: Rename global control devices as SUPERIO_DEV
Use SUPERIO_DEV for global control device instead of DUMMY_DEV.
Change-Id: If3555906d359695b2eae51209cd97fbaaace7e61
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25852
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c
index 1b5d2ae..0da658c 100644
--- a/src/mainboard/samsung/stumpy/romstage.c
+++ b/src/mainboard/samsung/stumpy/romstage.c
@@ -52,7 +52,7 @@
#endif
#define USB_RESET_DISABLE_MAGIC (0xdd) /* Disable if set to this */
-#define DUMMY_DEV PNP_DEV(0x2e, 0)
+#define SUPERIO_DEV PNP_DEV(0x2e, 0)
#define SERIAL_DEV PNP_DEV(0x2e, IT8772F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8772F_GPIO)
@@ -123,17 +123,17 @@
* GPIO10 as USBPWRON12#
* GPIO12 as USBPWRON13#
*/
- it8772f_gpio_setup(DUMMY_DEV, 1, 0x05, 0x05, 0x00, 0x05, 0x05);
+ it8772f_gpio_setup(SUPERIO_DEV, 1, 0x05, 0x05, 0x00, 0x05, 0x05);
/*
* GPIO22 as wake SCI#
*/
- it8772f_gpio_setup(DUMMY_DEV, 2, 0x04, 0x04, 0x00, 0x04, 0x04);
+ it8772f_gpio_setup(SUPERIO_DEV, 2, 0x04, 0x04, 0x00, 0x04, 0x04);
/*
* GPIO32 as EXTSMI#
*/
- it8772f_gpio_setup(DUMMY_DEV, 3, 0x04, 0x04, 0x00, 0x04, 0x04);
+ it8772f_gpio_setup(SUPERIO_DEV, 3, 0x04, 0x04, 0x00, 0x04, 0x04);
/*
* GPIO45 as LED_POWER#
@@ -147,8 +147,8 @@
* GPIO51 as USBPWRON8#
* GPIO52 as USBPWRON1#
*/
- it8772f_gpio_setup(DUMMY_DEV, 5, 0x06, 0x06, 0x00, 0x06, 0x06);
- it8772f_gpio_setup(DUMMY_DEV, 6, 0x00, 0x00, 0x00, 0x00, 0x00);
+ it8772f_gpio_setup(SUPERIO_DEV, 5, 0x06, 0x06, 0x00, 0x06, 0x06);
+ it8772f_gpio_setup(SUPERIO_DEV, 6, 0x00, 0x00, 0x00, 0x00, 0x00);
}
void mainboard_fill_pei_data(struct pei_data *pei_data)
@@ -258,7 +258,7 @@
setup_sio_gpios();
/* Early SuperIO setup */
- it8772f_ac_resume_southbridge(DUMMY_DEV);
+ it8772f_ac_resume_southbridge(SUPERIO_DEV);
ite_kill_watchdog(GPIO_DEV);
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
diff --git a/src/mainboard/samsung/stumpy/smihandler.c b/src/mainboard/samsung/stumpy/smihandler.c
index 00148f2..ad27bce 100644
--- a/src/mainboard/samsung/stumpy/smihandler.c
+++ b/src/mainboard/samsung/stumpy/smihandler.c
@@ -25,7 +25,7 @@
/* Include for SIO helper functions */
#include <superio/ite/it8772f/it8772f.h>
-#define DUMMY_DEV PNP_DEV(0x2e, 0)
+#define SUPERIO_DEV PNP_DEV(0x2e, 0)
/*
* Change LED_POWER# (SIO GPIO 45) state based on sleep type.
@@ -36,14 +36,14 @@
switch (slp_typ) {
case ACPI_S3:
case ACPI_S4:
- it8772f_gpio_led(DUMMY_DEV, 4 /* set */, (0x1 << 5) /* select */,
+ it8772f_gpio_led(SUPERIO_DEV, 4 /* set */, (0x1 << 5) /* select */,
(0x1 << 5) /* polarity */, (0x1 << 5) /* 1 = pullup */,
(0x1 << 5) /* output */, 0x00, /* 0 = Alternate function */
SIO_GPIO_BLINK_GPIO45, IT8772F_GPIO_BLINK_FREQUENCY_1_HZ);
break;
case ACPI_S5:
- it8772f_gpio_led(DUMMY_DEV, 4 /* set */, (0x1 << 5) /* select */,
+ it8772f_gpio_led(SUPERIO_DEV, 4 /* set */, (0x1 << 5) /* select */,
0x00 /* polarity: non-inverting */, 0x00 /* 0 = pulldown */,
(0x1 << 5) /* output */, (0x1 << 5) /* 1 = Simple IO function */,
SIO_GPIO_BLINK_GPIO45, IT8772F_GPIO_BLINK_FREQUENCY_1_HZ);