Fixed whitespace and indentation
Code style fixes for the hp/dl145_g1 system board code.
Change-Id: I3c1a175d954e2d340e82c03c9f984699dcff865e
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/428
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/mainboard/hp/dl145_g1/irq_tables.c b/src/mainboard/hp/dl145_g1/irq_tables.c
index 9d70a89..71288dd 100644
--- a/src/mainboard/hp/dl145_g1/irq_tables.c
+++ b/src/mainboard/hp/dl145_g1/irq_tables.c
@@ -17,18 +17,18 @@
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
unsigned long write_pirq_routing_table(unsigned long addr)
@@ -39,17 +39,17 @@
uint8_t *v;
struct mb_sysconf_t *m = sysconf.mb;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
@@ -75,21 +75,21 @@
write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
//pcix bridge
-// write_pirq_info(pirq_info, m->bus_8131_0, (m->sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-// pirq_info++; slot_num++;
+// write_pirq_info(pirq_info, m->bus_8131_0, (m->sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+// pirq_info++; slot_num++;
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk(BIOS_INFO, "done.\n");