blob: a4699707e4c0ffbf48b571abd7c5b8525c917f70 [file] [log] [blame]
##
## This file is part of the coreboot project.
##
## Copyright (C) 2010 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
config SOUTHBRIDGE_AMD_AGESA_HUDSON
bool
select IOAPIC
select HAVE_USBDEBUG
config BOOTBLOCK_SOUTHBRIDGE_INIT
string
default "southbridge/amd/agesa/hudson/bootblock.c"
depends on SOUTHBRIDGE_AMD_AGESA_HUDSON
config SOUTHBRIDGE_AMD_HUDSON_SKIP_ISA_DMA_INIT
bool
default n
depends on SOUTHBRIDGE_AMD_AGESA_HUDSON
config EHCI_BAR
hex
default 0xfef00000 if SOUTHBRIDGE_AMD_AGESA_HUDSON
config EHCI_DEBUG_OFFSET
hex
default 0xe0 if SOUTHBRIDGE_AMD_AGESA_HUDSON
if SOUTHBRIDGE_AMD_AGESA_HUDSON
config HUDSON_XHCI_FWM
bool "Add xhci firmware"
default y
select REQUIRES_BLOB
help
Add Hudson 2/3/4 XHCI Firmware to support the onboard usb3.0
config HUDSON_IMC_FWM
bool "Add imc firmware"
default y
select REQUIRES_BLOB
help
Add Hudson 2/3/4 IMC Firmware to support the onboard fan control
config HUDSON_GEC_FWM
bool "Add gec firmware"
default n
select REQUIRES_BLOB
help
Add Hudson 2/3/4 GEC Firmware
config HUDSON_XHCI_FWM_FILE
string "XHCI firmware path and filename"
default "3rdparty/southbridge/amd/hudson/xhci.bin"
depends on HUDSON_XHCI_FWM
config HUDSON_IMC_FWM_FILE
string "IMC firmware path and filename"
default "3rdparty/southbridge/amd/hudson/imc.bin"
depends on HUDSON_IMC_FWM
config HUDSON_GEC_FWM_FILE
string "GEC firmware path and filename"
default "3rdparty/southbridge/amd/hudson/gec.bin"
depends on HUDSON_GEC_FWM
config HUDSON_FWM
bool
default y if HUDSON_XHCI_FWM || HUDSON_IMC_FWM || HUDSON_GEC_FWM
default n if !HUDSON_XHCI_FWM && !HUDSON_IMC_FWM && !HUDSON_GEC_FWM
if HUDSON_FWM
config HUDSON_FWM_POSITION
hex "Hudson Firmware rom Position"
default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
default 0xFF820000 if BOARD_ROMSIZE_KB_8192
default 0xFF020000 if BOARD_ROMSIZE_KB_16384
help
Hudson requires the firmware MUST be located at
a specific address (ROM start address + 0x20000), otherwise
xhci host Controller can not find or load the xhci firmware.
The firmware start address is dependent on the ROM chip size.
The default offset is 0x20000 from the ROM start address, namely
0xFFF20000 if flash chip size is 1M
0xFFE20000 if flash chip size is 2M
0xFFC20000 if flash chip size is 4M
0xFF820000 if flash chip size is 8M
0xFF020000 if flash chip size is 16M
endif # HUDSON_FWM
choice
prompt "SATA Mode"
default HUDSON_SATA_IDE
help
Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
The default is NATIVE.
config HUDSON_SATA_IDE
bool "NATIVE"
help
NATIVE is the default mode and does not require a ROM.
config HUDSON_SATA_RAID
bool "RAID"
help
HUDSON RAID mode must have the two required ROM files.
config HUDSON_SATA_AHCI
bool "AHCI"
help
AHCI may work with or without AHCI ROM. It depends on the payload support.
For example, seabios does not require the AHCI ROM.
config HUDSON_SATA_LEGACY_IDE
bool "LEGACY IDE"
help
TODO
config HUDSON_SATA_IDE2AHCI
bool "IDE to AHCI"
help
TODO
config HUDSON_SATA_AHCI7804
bool "AHCI7804"
help
AHCI ROM Required, and AMD driver required in the OS.
config HUDSON_SATA_IDE2AHCI7804
bool "IDE to AHCI7804"
help
AHCI ROM Required, and AMD driver required in the OS.
endchoice
config HUDSON_SATA_MODE
hex
depends on (HUDSON_SATA_IDE || HUDSON_SATA_RAID || HUDSON_SATA_AHCI)
default "0x0" if HUDSON_SATA_IDE
default "0x1" if HUDSON_SATA_RAID
default "0x2" if HUDSON_SATA_AHCI
default "0x3" if HUDSON_SATA_LEGACY_IDE
default "0x4" if HUDSON_SATA_IDE2AHCI
default "0x5" if HUDSON_SATA_AHCI7804
default "0x6" if HUDSON_SATA_IDE2AHCI7804
if HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804
config AHCI_ROM_ID
string "AHCI device PCI IDs"
default "1022,7801" if HUDSON_SATA_AHCI
default "1022,7804" if HUDSON_SATA_AHCI7804
config HUDSON_AHCI_ROM
bool "Add a AHCI ROM"
config AHCI_ROM_FILE
string "AHCI ROM path and filename"
depends on HUDSON_AHCI_ROM
default "src/southbridge/amd/agesa/hudson/ahci.bin"
endif # HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804
if HUDSON_SATA_RAID
config RAID_ROM_ID
string "RAID device PCI IDs"
default "1022,7802"
help
1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode
config RAID_ROM_FILE
string "RAID ROM path and filename"
depends on HUDSON_SATA_RAID
default "src/southbridge/amd/agesa/hudson/raid.bin"
config RAID_MISC_ROM_FILE
string "RAID Misc ROM path and filename"
default "src/southbridge/amd/agesa/hudson/misc.bin"
depends on HUDSON_SATA_RAID
config RAID_MISC_ROM_POSITION
hex "RAID Misc ROM Position"
default 0xFFF00000
depends on HUDSON_SATA_RAID
help
The RAID ROM requires that the MISC ROM is located between the range
0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned.
The CONFIG_ROM_SIZE must larger than 0x100000.
endif # HUDSON_SATA_RAID
config S3_DATA_POS
hex "S3 volatile storage position"
default 0xFFFF0000
depends on HAVE_ACPI_RESUME
help
For a system with S3 feature, the BIOS needs to save some data to
non-volatile storage at cold boot stage.
config HUDSON_LEGACY_FREE
bool "System is legacy free"
help
Select y if there is no keyboard controller in the system.
This sets variables in AGESA and ACPI.
endif # SOUTHBRIDGE_AMD_AGESA_HUDSON