blob: 3322bf8e42c2a4cac6023c6b5682bf1fc0596276 [file] [log] [blame]
##
## This file is part of the coreboot project.
##
## Copyright (C) 2017 Intel Corporation.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
chip soc/intel/skylake
# Enable deep Sx states
register "deep_s5_enable_ac" = "0"
register "deep_s5_enable_dc" = "0"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# FSP Configuration
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "SmbusEnable" = "1"
register "ScsEmmcEnabled" = "0"
register "ScsEmmcHs400Enabled" = "0"
register "ScsSdCardEnabled" = "0"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "0"
register "Heci3Enabled" = "0"
register "SaGv" = "3"
register "PmTimerDisabled" = "0"
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
register "PmConfigSlpS3MinAssert" = "0x02"
# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
register "PmConfigSlpS4MinAssert" = "0x04"
# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
register "PmConfigSlpSusMinAssert" = "0x03"
# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
register "PmConfigSlpAMinAssert" = "0x03"
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# VR Settings Configuration for 5 Domains
#+----------------+-------+-------+-------------+-------------+-------+
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
#+----------------+-------+-------+-------------+-------------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
#| IccMax | 7A | 34A | 34A | 35A | 35A |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
#+----------------+-------+-------+-------------+-------------+-------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
.psi2threshold = 0x10, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
.imon_slope = 0x0, \
.imon_offset = 0x0, \
.icc_max = 0x1C, \
.voltage_limit = 0x5F0 \
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
.psi2threshold = 0x14, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
.imon_slope = 0x0, \
.imon_offset = 0x0, \
.icc_max = 0x88, \
.voltage_limit = 0x5F0 \
}"
register "domain_vr_config[VR_RING]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
.psi2threshold = 0x14, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
.imon_slope = 0x0, \
.imon_offset = 0x0, \
.icc_max = 0x88, \
.voltage_limit = 0x5F0, \
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
.psi2threshold = 0x14, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
.imon_slope = 0x0, \
.imon_offset = 0x0, \
.icc_max = 0x8C ,\
.voltage_limit = 0x5F0 \
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1, \
.psi1threshold = 0x50, \
.psi2threshold = 0x14, \
.psi3threshold = 0x4, \
.psi3enable = 1, \
.psi4enable = 1, \
.imon_slope = 0x0, \
.imon_offset = 0x0, \
.icc_max = 0x8C, \
.voltage_limit = 0x5F0 \
}"
# Enable x1 slot
register "PcieRpEnable[7]" = "1"
register "PcieRpClkReqSupport[7]" = "1"
register "PcieRpClkReqNumber[7]" = "3" #uses SRCCLKREQ3
# Enable x4 slot
register "PcieRpEnable[8]" = "1"
register "PcieRpClkReqSupport[8]" = "1"
register "PcieRpClkReqNumber[8]" = "4" #uses SRCCLKREQ4
# Enable Root port 6 and 13.
register "PcieRpEnable[5]" = "1"
register "PcieRpEnable[12]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[5]" = "1"
register "PcieRpClkReqSupport[12]" = "1"
# RP 6 uses SRCCLKREQ1# while RP `3 uses SRCCLKREQ2#
register "PcieRpClkReqNumber[5]" = "0"
register "PcieRpClkReqNumber[12]" = "1"
register "EnableLan" = "1"
# USB related
register "SsicPortEnable" = "1"
register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # OTG
register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" # Touch Pad
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 BT
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Touch Panel
register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN
register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Front Panel
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # Front Panel
register "usb2_ports[7]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb)
register "usb2_ports[8]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb)
register "usb2_ports[9]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK
register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK
register "usb2_ports[11]" = "USB2_PORT_MID(OC_SKIP)" # Finger print sensor
register "usb2_ports[12]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn
register "usb2_ports[13]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)" # OTG
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Flex
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # IVCAM
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel
register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel
register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn
register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn
register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "pirqa_routing" = "0x0b"
register "pirqb_routing" = "0x0a"
register "pirqc_routing" = "0x0b"
register "pirqd_routing" = "0x0b"
register "pirqe_routing" = "0x0b"
register "pirqf_routing" = "0x0b"
register "pirqg_routing" = "0x0b"
register "pirqh_routing" = "0x0b"
register "PmTimerDisabled" = "0"
register "EnableSata" = "1"
register "SataSalpSupport" = "1"
register "SataPortsEnable" = "{ \
[0] = 1, \
[1] = 1, \
[2] = 1, \
[3] = 1, \
[4] = 1, \
[5] = 1, \
[6] = 1, \
[7] = 1, \
}"
register "SerialIoDevMode" = "{ \
[PchSerialIoIndexI2C0] = PchSerialIoPci, \
[PchSerialIoIndexI2C1] = PchSerialIoPci, \
[PchSerialIoIndexI2C2] = PchSerialIoPci, \
[PchSerialIoIndexI2C3] = PchSerialIoPci, \
[PchSerialIoIndexI2C4] = PchSerialIoPci, \
[PchSerialIoIndexI2C5] = PchSerialIoPci, \
[PchSerialIoIndexSpi0] = PchSerialIoPci, \
[PchSerialIoIndexSpi1] = PchSerialIoPci, \
[PchSerialIoIndexUart0] = PchSerialIoPci, \
[PchSerialIoIndexUart1] = PchSerialIoPci, \
[PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
}"
# PL2 override 25W
register "tdp_pl2_override" = "25"
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Use default SD card detect GPIO configuration
#register "sdcard_cd_gpio_default" = "GPP_A7"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on end # I2C #0
device pci 15.1 on end # I2C #1
device pci 15.2 on end # I2C #2
device pci 15.3 on end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 on end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 on end # I2C #5
device pci 19.2 on end # I2C #4
device pci 1c.0 on end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 on end # UART #1
device pci 1e.2 on end # GSPI #0
device pci 1e.3 on end # GSPI #1
device pci 1e.4 off end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
device pci 1f.0 on
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 on end # GbE
end
end